MaxConnsPerHost can potentially hang a call without any
way to timeout, we do not need this setting for our proxy
and gateway implementations instead IdleConn settings are
good enough.
Also ensure to use NewRequestWithContext and make sure to
take the disks offline only for network errors.
Fixes#10304
inconsistent drive healing when one of the drive is offline
while a new drive was replaced, this change is to ensure
that we can add the offline drive back into the mix by
healing it again.
Add context to all (non-trivial) calls to the storage layer.
Contexts are propagated through the REST client.
- `context.TODO()` is left in place for the places where it needs to be added to the caller.
- `endWalkCh` could probably be removed from the walkers, but no changes so far.
The "dangerous" part is that now a caller disconnecting *will* propagate down, so a
"delete" operation will now be interrupted. In some cases we might want to disconnect
this functionality so the operation completes if it has started, leaving the system in a cleaner state.
This commit refactors the certificate management implementation
in the `certs` package such that multiple certificates can be
specified at the same time. Therefore, the following layout of
the `certs/` directory is expected:
```
certs/
│
├─ public.crt
├─ private.key
├─ CAs/ // CAs directory is ignored
│ │
│ ...
│
├─ example.com/
│ │
│ ├─ public.crt
│ └─ private.key
└─ foobar.org/
│
├─ public.crt
└─ private.key
...
```
However, directory names like `example.com` are just for human
readability/organization and don't have any meaning w.r.t whether
a particular certificate is served or not. This decision is made based
on the SNI sent by the client and the SAN of the certificate.
***
The `Manager` will pick a certificate based on the client trying
to establish a TLS connection. In particular, it looks at the client
hello (i.e. SNI) to determine which host the client tries to access.
If the manager can find a certificate that matches the SNI it
returns this certificate to the client.
However, the client may choose to not send an SNI or tries to access
a server directly via IP (`https://<ip>:<port>`). In this case, we
cannot use the SNI to determine which certificate to serve. However,
we also should not pick "the first" certificate that would be accepted
by the client (based on crypto. parameters - like a signature algorithm)
because it may be an internal certificate that contains internal hostnames.
We would disclose internal infrastructure details doing so.
Therefore, the `Manager` returns the "default" certificate when the
client does not specify an SNI. The default certificate the top-level
`public.crt` - i.e. `certs/public.crt`.
This approach has some consequences:
- It's the operator's responsibility to ensure that the top-level
`public.crt` does not disclose any information (i.e. hostnames)
that are not publicly visible. However, this was the case in the
past already.
- Any other `public.crt` - except for the top-level one - must not
contain any IP SAN. The reason for this restriction is that the
Manager cannot match a SNI to an IP b/c the SNI is the server host
name. The entire purpose of SNI is to indicate which host the client
tries to connect to when multiple hosts run on the same IP. So, a
client will not set the SNI to an IP.
If we would allow IP SANs in a lower-level `public.crt` a user would
expect that it is possible to connect to MinIO directly via IP address
and that the MinIO server would pick "the right" certificate. However,
the MinIO server cannot determine which certificate to serve, and
therefore always picks the "default" one. This may lead to all sorts
of confusing errors like:
"It works if I use `https:instance.minio.local` but not when I use
`https://10.0.2.1`.
These consequences/limitations should be pointed out / explained in our
docs in an appropriate way. However, the support for multiple
certificates should not have any impact on how deployment with a single
certificate function today.
Co-authored-by: Harshavardhana <harsha@minio.io>
- do not fail the healthcheck if heal status
was not obtained from one of the nodes,
if many nodes fail then report this as a
catastrophic error.
- add "x-minio-write-quorum" value to match
the write tolerance supported by server.
- admin info now states if a drive is healing
where madmin.Disk.Healing is set to true
and madmin.Disk.State is "ok"
Currently, cache purges are triggered as soon as the low watermark is exceeded.
To reduce IO this should only be done when reaching the high watermark.
This simplifies checks and reduces all calls for a GC to go through
`dcache.diskSpaceAvailable(size)`. While a comment claims that
`dcache.triggerGC <- struct{}{}` was non-blocking I don't see how
that was possible. Instead, we add a 1 size to the queue channel
and use channel semantics to avoid blocking when a GC has
already been requested.
`bytesToClear` now takes the high watermark into account to it will
not request any bytes to be cleared until that is reached.
This commit reduces the retry delay when retrying a request
to a KES server by:
- reducing the max. jitter delay from 3s to 1.5s
- skipping the random delay when there are more KES endpoints
available.
If there are more KES endpoints we can directly retry to the request
by sending it to the next endpoint - as pointed out by @krishnasrinivas
- delete-marker should be created on a suspended bucket as `null`
- delete-marker should delete any pre-existing `null` versioned
object and create an entry `null`
When checking parts we already do a stat for each part.
Since we have the on disk size check if it is at least what we expect.
When checking metadata check if metadata is 0 bytes.
The `getNonLoopBackIP` may grab an IP from an interface that
doesn't allow binding (on Windows), so this test consistently fails.
We exclude that specific error.
* readDirN: Check if file is directory
`syscall.FindNextFile` crashes if the handle is a file.
`errFileNotFound` matches 'unix' functionality: d19b434ffc/cmd/os-readdir_unix.go (L106)Fixes#10384
This commit addresses a maintenance / automation problem when MinIO-KES
is deployed on bare-metal. In orchestrated env. the orchestrator (K8S)
will make sure that `n` KES servers (IPs) are available via the same DNS
name. There it is sufficient to provide just one endpoint.
ListObjectsV1 requests are actually redirected to a specific node,
depending on the bucket name. The purpose of this behavior was
to optimize listing.
However, the current code sends a Bad Gateway error if the
target node is offline, which is a bad behavior because it means
that the list request will fail, although this is unnecessary since
we can still use the current node to list as well (the default behavior
without using proxying optimization)
Currently, you can see mint fails when there is one offline node, after
this PR, mint will always succeed.
We can reduce this further in the future, but this is a good
value to keep around. With the advent of continuous healing,
we can be assured that namespace will eventually be
consistent so we are okay to avoid the necessity to
a list across all drives on all sets.
Bonus Pop()'s in parallel seem to have the potential to
wait too on large drive setups and cause more slowness
instead of gaining any performance remove it for now.
Also, implement load balanced reply for local disks,
ensuring that local disks have an affinity for
- cleanupStaleMultipartUploads()
If DiskInfo calls failed the information returned was used anyway
resulting in no endpoint being set.
This would make the drive be attributed to the local system since
`disk.Endpoint == disk.DrivePath` in that case.
Instead, if the call fails record the endpoint and the error only.
bonus make sure to ignore objectNotFound, and versionNotFound
errors properly at all layers, since HealObjects() returns
objectNotFound error if the bucket or prefix is empty.
Harshavardhana
Klaus Post
飞雪无情
Minio Trusted
poornas
Andreas Auernhammer
Krishna Srinivas
Rushan
Anis Elleuch
Gaige B Paulsen
unlimitedbits
Eco
Jorge Israel Peña