If used, 'opts.Marker` will cause many missed entries since results are returned
unsorted, and pools are serialized.
Switch to fully concurrent listing and merging across pools to return sorted entries.
It is expected that whoever is using the credentials which has
the proper set of permissions must be able to run.
`mc support perf object`
While the root login is disabled.
fixes#19648
AWS S3 returns the actual object size as part of XML
response for InvalidRange error, this is used apparently
by SDKs to retry the request without the range.
'opts.Marker` is causing many missed entries if used since results are returned unsorted. Also since pools are serialized.
Switch to do fully concurrent listing and merging across pools to return sorted entries.
Returning errors on listings is impossible with the current API, so document that.
Return an error at once if no drives are found instead of just returning an empty listing and no error.
This is to support deployments migrating from a multi-pooled
wider stripe to lower stripe. MINIO_STORAGE_CLASS_STANDARD
is still expected to be same for all pools. So you can satisfy
adding custom drive count based pools by adjusting the storage
class value.
```
version: v2
address: ':9000'
rootUser: 'minioadmin'
rootPassword: 'minioadmin'
console-address: ':9001'
pools: # Specify the nodes and drives with pools
-
args:
- 'node{11...14}.example.net/data{1...4}'
-
args:
- 'node{15...18}.example.net/data{1...4}'
-
args:
- 'node{19...22}.example.net/data{1...4}'
-
args:
- 'node{23...34}.example.net/data{1...10}'
set-drive-count: 6
```
ILM actions due to ExpiredObjectDeleteAllVersions and
DelMarkerExpiration are ignored when object locking is enabled on a
bucket.
Note: This applies to object versions which may not have retention
configured on them. This applies to all object versions in this bucket,
including those created before the retention config was applied.
Per-bucket metrics endpoints always start with /bucket and the bucket
name is appended to the path. e.g. if the collector path is /bucket/api,
the endpoint for the bucket "mybucket" would be
/minio/metrics/v3/bucket/api/mybucket
Change the existing bucket api endpoint accordingly from /api/bucket to
/bucket/api
The `Token` parameter is a sensitive value that should not be output in the Audit log for STS AssumeRoleWithCustomToken API.
Bonus: Add a simple tool that echoes audit logs to the console.
When listing, with drives returning `errFileNotFound,` `errVolumeNotFound`, or `errUnformattedDisk,`,
we could get below `minDisks` drives being left.
This would result in a quorum never being reachable for any object. Therefore, the listing
would continue, but no results would ever be produced.
Include `fnf` in the mindisk check since it is incremented on these errors. This will stop
listing when minDisks are left.
Allow `opts.minDisks` to not return errVolumeNotFound or errFileNotFound and return that.
That will allow for good results even if disks return something else.
We switch `errUnformattedDisk` to a regular error. If we have enough of those, we should just fail.
Typically not all drives are connected, so we delay 3 minutes before resuming.
This greatly reduces risk of starting to list unconnected drives, or drives we risk being disconnected soon.
This delay is not applied when starting with an admin call.
ConsoleUI like applications rely on combination of
ListServiceAccounts() and InfoServiceAccount() to populate
UI elements, however individually these calls can be slow
causing the entire UI to load sluggishly.
i.e., this rule element doesn't apply to DEL markers.
This is a breaking change to how ExpiredObejctDeleteAllVersions
functions today. This is necessary to avoid the following highly probable
footgun scenario in the future.
Scenario:
The user uses tags-based filtering to select an object's time to live(TTL).
The application sometimes deletes objects, too, making its latest
version a DEL marker. The previous implementation skipped tag-based filters
if the newest version was DEL marker, voiding the tag-based TTL. The user is
surprised to find objects that have expired sooner than expected.
* Add DelMarkerExpiration action
This ILM action removes all versions of an object if its
the latest version is a DEL marker.
```xml
<DelMarkerObjectExpiration>
<Days> 10 </Days>
</DelMarkerObjectExpiration>
```
1. Applies only to objects whose,
• The latest version is a DEL marker.
• satisfies the number of days criteria
2. Deletes all versions of this object
3. Associated rule can't have tag-based filtering
Includes,
- New bucket event type for deletion due to DelMarkerExpiration
calling a remote target remove with a perfectly
well constructed ARN can lead to a crash for a bucket
with no replication configured.
This PR fixes, and adds a crash check for ImportMetadata
as well.
Algorithms are comma separated.
Note that valid values does not in all cases represent default values.
`--sftp=pub-key-algos=...` specifies the supported client public key
authentication algorithms. Note that this doesn't include certificate types
since those use the underlying algorithm. This list is sent to the client if
it supports the server-sig-algs extension. Order is irrelevant.
Valid values
```
ssh-ed25519
sk-ssh-ed25519@openssh.comsk-ecdsa-sha2-nistp256@openssh.com
ecdsa-sha2-nistp256
ecdsa-sha2-nistp384
ecdsa-sha2-nistp521
rsa-sha2-256
rsa-sha2-512
ssh-rsa
ssh-dss
```
`--sftp=kex-algos=...` specifies the supported key-exchange algorithms in preference order.
Valid values:
```
curve25519-sha256
curve25519-sha256@libssh.org
ecdh-sha2-nistp256
ecdh-sha2-nistp384
ecdh-sha2-nistp521
diffie-hellman-group14-sha256
diffie-hellman-group16-sha512
diffie-hellman-group14-sha1
diffie-hellman-group1-sha1
```
`--sftp=cipher-algos=...` specifies the allowed cipher algorithms.
If unspecified then a sensible default is used.
Valid values:
```
aes128-ctr
aes192-ctr
aes256-ctr
aes128-gcm@openssh.comaes256-gcm@openssh.comchacha20-poly1305@openssh.com
arcfour256
arcfour128
arcfour
aes128-cbc
3des-cbc
```
`--sftp=mac-algos=...` specifies a default set of MAC algorithms in preference order.
This is based on RFC 4253, section 6.4, but with hmac-md5 variants removed because they have
reached the end of their useful life.
Valid values:
```
hmac-sha2-256-etm@openssh.comhmac-sha2-512-etm@openssh.com
hmac-sha2-256
hmac-sha2-512
hmac-sha1
hmac-sha1-96
```
This would reduce the size of data in response of metrics
listing. While graphing we can default these metrics with
a zero value if not found.
Signed-off-by: Shubhendu Ram Tripathi <shubhendu@minio.io>
Unfreeze as soon as the incoming connection is terminated and don't wait for everything to complete.
We don't want to keep the services frozen if something becomes stuck.
- handle errFileCorrupt properly
- micro-optimization of sending done() response quicker
to close the goroutine.
- fix logger.Event() usage in a couple of places
- handle the rest of the client to return a different error other than
lastErr() when the client is closed.
listPathRaw() counts errDiskNotFound as a valid error to indicate a
listing stream end. However, storage.WalkDir() is allowed to return
errDiskNotFound anytime since grid.ErrDisconnected is converted to
errDiskNotFound.
This affects fresh disk healing and should affect S3 listing as well.
endpoint: /minio/metrics/v3/system/process
metrics:
- locks_read_total
- locks_write_total
- cpu_total_seconds
- go_routine_total
- io_rchar_bytes
- io_read_bytes
- io_wchar_bytes
- io_write_bytes
- start_time_seconds
- uptime_seconds
- file_descriptor_limit_total
- file_descriptor_open_total
- syscall_read_total
- syscall_write_total
- resident_memory_bytes
- virtual_memory_bytes
- virtual_memory_max_bytes
Since the standard process collector implements only a subset of these
metrics, remove it and implement our own custom process collector that
captures all the process metrics we need.
Since the object is being permanently deleted, the lack of read quorum should not
matter as long as sufficient disks are online to complete the deletion with parity
requirements.
If several pools have the same object with insufficient read quorum, attempt to
delete object from all the pools where it exists
At server startup, LDAP configuration is validated against the LDAP
server. If the LDAP server is down at that point, we need to cleanly
disable LDAP configuration. Previously, LDAP would remain configured but
error out in strange ways because initialization did not complete
without errors.
When importing access keys (i.e. service accounts) for LDAP accounts,
we are requiring groups to exist under one of the configured group base
DNs. This is not correct. This change fixes this by only checking for
existence and storing the normalized form of the group DN - we do not
return an error if the group is not under a base DN.
Test is updated to illustrate an import failure that would happen
without this change.
