Fixes support for using multiple base DNs for user search in the LDAP directory
allowing users from different subtrees in the LDAP hierarchy to request
credentials.
- The username in the produced credentials is now the full DN of the LDAP user
to disambiguate users in different base DNs.
Current implementation requires server pools to have
same erasure stripe sizes, to facilitate same SLA
and expectations.
This PR allows server pools to be variadic, i.e they
do not have to be same erasure stripe sizes - instead
they should have SLA for parity ratio.
If the parity ratio cannot be guaranteed by the new
server pool, the deployment is rejected i.e server
pool expansion is not allowed.
current implementation was incorrect, it in-fact
assumed only read quorum number of disks. in-fact
that value is only meant for read quorum good entries
from all online disks.
This PR fixes this behavior properly.
Due to botched upstream renames of project repositories
and incomplete migration to go.mod support, our current
dependency version of `go.mod` had bugs i.e it was
using commits from master branch which didn't have
the required fixes present in release-3.4 branches
which leads to some rare bugs
https://github.com/etcd-io/etcd/pull/11477 provides
a workaround for now and we should migrate to this.
release-3.5 eventually claims to fix all of this
properly until then we cannot use /v3 import right now
supports `mc admin config set <alias> heal sleep=100ms` to
enable more aggressive healing under certain times.
also optimize some areas that were doing extra checks than
necessary when bitrotscan was enabled, avoid double sleeps
make healing more predictable.
fixes#10497
Add `MINIO_API_EXTEND_LIST_CACHE_LIFE` that will extend
the life of generated caches for a while.
This changes caches to remain valid until no updates have been
received for the specified time plus a fixed margin.
This also changes the caches from being invalidated when the *first*
set finishes until the *last* set has finished plus the specified time
has passed.
Add store and a forward option for a single part
uploads when an async mode is enabled with env
MINIO_CACHE_COMMIT=writeback
It defaults to `writethrough` if unspecified.
throw proper error when port is not accessible
for the regular user, this is possibly a regression.
```
ERROR Unable to start the server: Insufficient permissions to use specified port
> Please ensure MinIO binary has 'cap_net_bind_service=+ep' permissions
HINT:
Use 'sudo setcap cap_net_bind_service=+ep /path/to/minio' to provide sufficient permissions
```
As the bulk/recursive delete will require multiple connections to open at an instance,
The default open connections limit will be reached which results in the following error
```FATAL: sorry, too many clients already```
By setting the open connections to a reasonable value - `2`, We ensure that the max open connections
will not be exhausted and lie under bounds.
The queries are simple inserts/updates/deletes which is operational and sufficient with the
the maximum open connection limit is 2.
Fixes#10553
Allow user configuration for MaxOpenConnections
configurable remote transport timeouts for some special cases
where this value needs to be bumped to a higher value when
transferring large data between federated instances.
This PR adds a DNS target that ensures to update an entry
into Kubernetes operator when a bucket is created or deleted.
See minio/operator#264 for details.
Co-authored-by: Harshavardhana <harsha@minio.io>
This commit refactors the certificate management implementation
in the `certs` package such that multiple certificates can be
specified at the same time. Therefore, the following layout of
the `certs/` directory is expected:
```
certs/
│
├─ public.crt
├─ private.key
├─ CAs/ // CAs directory is ignored
│ │
│ ...
│
├─ example.com/
│ │
│ ├─ public.crt
│ └─ private.key
└─ foobar.org/
│
├─ public.crt
└─ private.key
...
```
However, directory names like `example.com` are just for human
readability/organization and don't have any meaning w.r.t whether
a particular certificate is served or not. This decision is made based
on the SNI sent by the client and the SAN of the certificate.
***
The `Manager` will pick a certificate based on the client trying
to establish a TLS connection. In particular, it looks at the client
hello (i.e. SNI) to determine which host the client tries to access.
If the manager can find a certificate that matches the SNI it
returns this certificate to the client.
However, the client may choose to not send an SNI or tries to access
a server directly via IP (`https://<ip>:<port>`). In this case, we
cannot use the SNI to determine which certificate to serve. However,
we also should not pick "the first" certificate that would be accepted
by the client (based on crypto. parameters - like a signature algorithm)
because it may be an internal certificate that contains internal hostnames.
We would disclose internal infrastructure details doing so.
Therefore, the `Manager` returns the "default" certificate when the
client does not specify an SNI. The default certificate the top-level
`public.crt` - i.e. `certs/public.crt`.
This approach has some consequences:
- It's the operator's responsibility to ensure that the top-level
`public.crt` does not disclose any information (i.e. hostnames)
that are not publicly visible. However, this was the case in the
past already.
- Any other `public.crt` - except for the top-level one - must not
contain any IP SAN. The reason for this restriction is that the
Manager cannot match a SNI to an IP b/c the SNI is the server host
name. The entire purpose of SNI is to indicate which host the client
tries to connect to when multiple hosts run on the same IP. So, a
client will not set the SNI to an IP.
If we would allow IP SANs in a lower-level `public.crt` a user would
expect that it is possible to connect to MinIO directly via IP address
and that the MinIO server would pick "the right" certificate. However,
the MinIO server cannot determine which certificate to serve, and
therefore always picks the "default" one. This may lead to all sorts
of confusing errors like:
"It works if I use `https:instance.minio.local` but not when I use
`https://10.0.2.1`.
These consequences/limitations should be pointed out / explained in our
docs in an appropriate way. However, the support for multiple
certificates should not have any impact on how deployment with a single
certificate function today.
Co-authored-by: Harshavardhana <harsha@minio.io>
We can reduce this further in the future, but this is a good
value to keep around. With the advent of continuous healing,
we can be assured that namespace will eventually be
consistent so we are okay to avoid the necessity to
a list across all drives on all sets.
Bonus Pop()'s in parallel seem to have the potential to
wait too on large drive setups and cause more slowness
instead of gaining any performance remove it for now.
Also, implement load balanced reply for local disks,
ensuring that local disks have an affinity for
- cleanupStaleMultipartUploads()
adds a feature where we can fetch the MinIO
command-line remotely, this
is primarily meant to add some stateless
nature to the MinIO deployment in k8s
environments, MinIO operator would run a
webhook service endpoint
which can be used to fetch any environment
value in a generalized approach.
with the merge of https://github.com/etcd-io/etcd/pull/11823
etcd v3.5.0 will now have a properly imported versioned path
this fixes our pending migration to newer repo
Readiness as no reasoning to be cluster scope
because that is not how the k8s networking works
for pods, all the pods to a deployment are not
sharing the network in a singleton. Instead they
are run as local scopes to themselves, with
readiness failures the pod is potentially taken
out of the network to be resolvable - this
affects the distributed setup in myriad of
different ways.
Instead readiness should behave like liveness
with local scope alone, and should be a dummy
implementation.
This PR all the startup times and overal k8s
startup time dramatically improves.
Added another handler called as `/minio/health/cluster`
to understand the cluster scope health.
The default behavior is to cache each range requested
to cache drive. Add an environment variable
`MINIO_RANGE_CACHE` - when set to off, it disables
range caching and instead downloads entire object
in the background.
Fixes#9870
This PR has the following changes
- Removing duplicate lookupConfigs() calls.
- Deprecate admin config APIs for NAS gateways. This will avoid repeated reloads of the config from the disk.
- WatchConfigNASDisk will be removed
- Migration guide for NAS gateways users to migrate to ENV settings.
NOTE: THIS PR HAS A BREAKING CHANGE
Fixes#9875
Co-authored-by: Harshavardhana <harsha@minio.io>
