This PR fixes possible leaks that may emanate from not
listening on context cancelation or timeouts.
```
goroutine 60957610 [chan send, 16 minutes]:
github.com/minio/minio/cmd.(*erasureServerPools).Walk.func1.1.1(...)
github.com/minio/minio/cmd/erasure-server-pool.go:1724 +0x368
github.com/minio/minio/cmd.listPathRaw({0x4a9a740, 0xc0666dffc0},...
github.com/minio/minio/cmd/metacache-set.go:1022 +0xfc4
github.com/minio/minio/cmd.(*erasureServerPools).Walk.func1.1()
github.com/minio/minio/cmd/erasure-server-pool.go:1764 +0x528
created by github.com/minio/minio/cmd.(*erasureServerPools).Walk.func1
github.com/minio/minio/cmd/erasure-server-pool.go:1697 +0x1b7
```
The bottom line is delete markers are a nuisance,
most applications are not version aware and this
has simply complicated the version management.
AWS S3 gave an unnecessary complication overhead
for customers, they need to now manage these
markers by applying ILM settings and clean
them up on a regular basis.
To make matters worse all these delete markers
get replicated as well in a replicated setup,
requiring two ILM settings on each site.
This PR is an attempt to address this inferior
implementation by deviating MinIO towards an
idempotent delete marker implementation i.e
MinIO will never create any more than single
consecutive delete markers.
This significantly reduces operational overhead
by making versioning more useful for real data.
This is an S3 spec deviation for pragmatic reasons.
Queue failed/pending replication for healing during listing and GET/HEAD
API calls. This includes healing of existing objects that were never
replicated or those in the middle of a resync operation.
This PR also fixes a bug in ListObjectVersions where lifecycle filtering
should be done.
this has been observed in multiple environments
where the setups are small `speedtest` naturally
fails with default '10s' and the concurrency
of '32' is big for such clusters.
choose a smaller value i.e equal to number of
drives in such clusters and let 'autotune'
increase the concurrency instead.
This PR changes the handling of bucket deletes for site
replicated setups to hold on to deleted bucket state until
it syncs to all the clusters participating in site replication.
Make bucket requests sent after decommissioning is started are not
created in a suspended pool. Therefore listing buckets should avoid
suspended pools as well.
The current code uses approximation using a ratio. The approximation
can skew if we have multiple pools with different disk capacities.
Replace the algorithm with a simpler one which counts data
disks and ignore parity disks.
fix: allow certain mutation on objects during decommission
currently by mistake deletion of objects was skipped,
if the object resided on the pool being decommissioned.
delete's are okay to be allowed since decommission is
designed to run on a cluster with active I/O.
versioned buckets were not creating the delete markers
present in the versioned stack of an object, this essentially
would stop decommission to succeed.
This PR fixes creating such delete markers properly during
a decommissioning process, adds tests as well.
`mc admin heal -r <alias>` in a multi setup pools returns incorrectly
grey objects. The reason is that erasure-server-pools.HealObject() runs
HealObject in all pools and returns the result of the first nil
error. However, in the lower erasureObject level, HealObject() returns
nil if an object does not exist + missing error in each disk of the object
in that pool, therefore confusing mc.
Make erasureObject.HealObject() to return not found error in the lower
level, so at least erasureServerPools will know what pools to ignore.
PR #15041 fixed replicating 'null' version however
due to a regression from #14994 caused the target
versions for these 'null' versioned objects to have
different 'versions', this may cause confusion with
bi-directional replication and cause double replication.
This PR fixes this properly by making sure we replicate
the correct versions on the objects.
We need to make sure if we cannot read bucket metadata
for some reason, and bucket metadata is not missing and
returning corrupted information we should panic such
handlers to disallow I/O to protect the overall state
on the system.
In-case of such corruption we have a mechanism now
to force recreate the metadata on the bucket, using
`x-minio-force-create` header with `PUT /bucket` API
call.
Additionally fix the versioning config updated state
to be set properly for the site replication healing
to trigger correctly.
Main motivation is move towards a common backend format
for all different types of modes in MinIO, allowing for
a simpler code and predictable behavior across all features.
This PR also brings features such as versioning, replication,
transitioning to single drive setups.
If one or more pools reach 85% usage in a set, we will only
use pools that have more free space.
In case all pools are above 85% we allow all of them to be used
with the regular distribution.
When a server pool with a different number of sets is added they are
not compensated when choosing a destination pool for new objects.
This leads to the unbalanced placement of objects with smaller pools
getting a bigger number of objects since we only compare the destination
sets directly.
This change will compensate for differences in set sizes when choosing
the destination pool.
Different set sizes are already compensated by fewer disks.
In case of multi-pools setup, GetObjectNInfo returns a GetObjectReader
but it unlocks the read lock when quitting GetObjectNInfo. This should
not happen, unlock should only happen when GetObjectReader is closed.
currently filterPefix was never used and set
that would filter out entries when needed
when `prefix` doesn't end with `/` - this
often leads to objects getting Walked(), Healed()
that were never requested by the caller.
For ListObjects and ListObjectsV2 perform lifecycle checks on
all objects before returning. This will filter out objects that are
pending lifecycle expiration.
Bonus: Cheaper server pool conflict resolution by not converting to FileInfo.
currently an on-going decommission, during a server
restart might block the startup sequence for relatively
longer periods, instead start the decommission in
background lazily.
Only the first `listAndHeal` would ever be able to write on errCh, blocking all others infinitely.
Instead read all errors but return the first non-nil, if any.
The intention appears to be that this should cancel on any error,
so that part is kept.
Regression from #13990
Deleting bulk objects had an issue since the relevant versionID
is not passed through the layers to ensure that the dangling
object purge actually works cleanly.
This is a continuation of quorum related error returned by
multi-object delete API from #14248
This PR ensures that we pass down correct information as
well as extend the scope of dangling object detection.
This speed-up is intended for faster startup times
for almost all MinIO operations. Changes here are
- Drives are not re-read for 'format.json' on a regular
basis once read during init is remembered and refreshed
at 5 second intervals.
- Do not do O_DIRECT tests on drives with existing 'format.json'
only fresh setups need this check.
- Parallelize initializing erasureSets for multiple sets.
- Avoid re-reading format.json when migrating 'format.json'
from really old V1->V2->V3
- Keep a copy of local drives for any given server in memory
for a quick lookup.
```
λ mc admin decommission start alias/ http://minio{1...2}/data{1...4}
```
```
λ mc admin decommission status alias/
┌─────┬─────────────────────────────────┬──────────────────────────────────┬────────┐
│ ID │ Pools │ Capacity │ Status │
│ 1st │ http://minio{1...2}/data{1...4} │ 439 GiB (used) / 561 GiB (total) │ Active │
│ 2nd │ http://minio{3...4}/data{1...4} │ 329 GiB (used) / 421 GiB (total) │ Active │
└─────┴─────────────────────────────────┴──────────────────────────────────┴────────┘
```
```
λ mc admin decommission status alias/ http://minio{1...2}/data{1...4}
Progress: ===================> [1GiB/sec] [15%] [4TiB/50TiB]
Time Remaining: 4 hours (started 3 hours ago)
```
```
λ mc admin decommission status alias/ http://minio{1...2}/data{1...4}
ERROR: This pool is not scheduled for decommissioning currently.
```
```
λ mc admin decommission cancel alias/
┌─────┬─────────────────────────────────┬──────────────────────────────────┬──────────┐
│ ID │ Pools │ Capacity │ Status │
│ 1st │ http://minio{1...2}/data{1...4} │ 439 GiB (used) / 561 GiB (total) │ Draining │
└─────┴─────────────────────────────────┴──────────────────────────────────┴──────────┘
```
> NOTE: Canceled decommission will not make the pool active again, since we might have
> Potentially partial duplicate content on the other pools, to avoid this scenario be
> very sure to start decommissioning as a planned activity.
```
λ mc admin decommission cancel alias/ http://minio{1...2}/data{1...4}
┌─────┬─────────────────────────────────┬──────────────────────────────────┬────────────────────┐
│ ID │ Pools │ Capacity │ Status │
│ 1st │ http://minio{1...2}/data{1...4} │ 439 GiB (used) / 561 GiB (total) │ Draining(Canceled) │
└─────┴─────────────────────────────────┴──────────────────────────────────┴────────────────────┘
```
ListObjects() should never list a delete-marked folder
if latest is delete marker and delimiter is not provided.
ListObjectVersions() should list a delete-marked folder
even if latest is delete marker and delimiter is not
provided.
Enhance further versioning listing on the buckets
delete marked objects should not be considered
for listing when listing is delimited, this issue
as introduced in PR #13804 which was mainly to
address listing of directories in listing when
delimited.
This PR fixes this properly and adds tests to
ensure that we behave in accordance with how
an S3 API behaves for ListObjects() without
versions.
Following scenario such as objects that exist inside a
prefix say `folder/` must be included in the listObjects()
response.
```
2aa16073-387e-492c-9d59-b4b0b7b6997a v2 DEL folder/
a5b9ce68-7239-4921-90ab-20aed402c7a2 v1 PUT folder/
f2211798-0eeb-4d9e-9184-fcfeae27d069 v1 PUT folder/1.txt
```
Current master does not handle this scenario, because it
ignores the top level delete-marker on folders. This is
however unexpected. It is expected that list-objects returns
the top level prefix in this situation.
```
aws s3api list-objects --bucket harshavardhana --prefix unique/ \
--delimiter / --profile minio --endpoint-url http://localhost:9000
{
"CommonPrefixes": [
{
"Prefix": "unique/folder/"
}
]
}
```
There are applications in the wild such as Hadoop s3a connector
that exploit this behavior and expect the folder to be present
in the response.
This also makes the behavior consistent with AWS S3.
single object delete was not working properly
on a bucket when versioning was suspended,
current version 'null' object was never removed.
added unit tests to cover the behavior
fixes#13783
- add checks such that swapped disks are detected
and ignored - never used for normal operations.
- implement `unrecognizedDisk` to be ignored with
all operations returning `errDiskNotFound`.
- also add checks such that we do not load unexpected
disks while connecting automatically.
- additionally humanize the values when printing the errors.
Bonus: fixes handling of non-quorum situations in
getLatestFileInfo(), that does not work when 2 drives
are down, currently this function would return errors
incorrectly.
- avoids relying in listQuorum from the underlying listObjects()
and potentially missing entries if any.
- avoid the entire merging logic etc, listing raw set by set
and loading whatever is found is cleaner when dealing with
a large cluster for IAM metadata.
In (erasureServerPools).MakeBucketWithLocation deletes the created
buckets if any set returns an error.
Add `NoRecreate` option, which will not recreate the bucket
in `DeleteBucket`, if the operation fails.
Additionally use context.Background() for operations we always want to be performed.
bucket deletes should purge entire bucket metadata
appropriately, use rename() to move the metadata files
to trash folder,
for dangling buckets instead of doing recursive deletes,
rename such buckets to trash folder as well.
Bonus: reduce retry duration for listing to 200ms
This was a regression introduced in '14bb969782'
this has the potential to cause corruption when
there are concurrent overwrites attempting to update
the content on the namespace.
This PR adds a situation where PutObject(), CopyObject()
compete properly for the same locks with NewMultipartUpload()
however it ends up turning off competing locks for the actual
object with GetObject() and DeleteObject() - since they do not
compete due to concurrent I/O on a versioned bucket it can lead
to loss of versions.
This PR fixes this bug with multi-pool setup with replication
that causes corruption of inlined data due to lack of competing
locks in a multi-pool setup.
Instead CompleteMultipartUpload holds the necessary
locks when finishing the transaction, knowing the exact
location of an object to schedule the multipart upload
doesn't need to compete in this manner, a pool id location
for existing object.
also remove HealObjects() code from dataScanner running another
listing from the data-scanner is super in-efficient and in-fact
this code is redundant since we already attempt to heal all
dangling objects anyways.
healObject() should be non-blocking to ensure
that scanner is not blocked for a long time,
this adversely affects performance of the scanner
and also affects the way usage is updated
subsequently.
This PR allows for a non-blocking behavior for
healing, dropping operations that cannot be queued
anymore.
Synchronize bucket cycles so it is much more
likely that the same prefixes will be picked up
for scanning.
Use the global bloom filter cycle for that.
Bump bloom filter versions to clear those.
Ensure that one call will succeed and others will serialize
Example failure without code in place:
```
bucket-policy-handlers_test.go:120: unexpected error: cmd.InsufficientWriteQuorum: Storage resources are insufficient for the write operation doz2wjqaovp5kvlrv11fyacowgcvoziszmkmzzz9nk9au946qwhci4zkane5-1/
bucket-policy-handlers_test.go:120: unexpected error: cmd.InsufficientWriteQuorum: Storage resources are insufficient for the write operation doz2wjqaovp5kvlrv11fyacowgcvoziszmkmzzz9nk9au946qwhci4zkane5-1/
bucket-policy-handlers_test.go:135: want 1 ok, got 0
```
Some applications albeit poorly written rather than using headObject
rely on listObjects to check for existence of object, this unusual
request always has prefix=(to actual object) and max-keys=1
handle this situation specially such that we can avoid readdir()
on the top level parent to avoid sorting and skipping, ensuring
that such type of listObjects() always behaves similar to a
headObject() call.
- deletes should always Sweep() for tiering at the
end and does not need an extra getObjectInfo() call
- puts, copy and multipart writes should conditionally
do getObjectInfo() when tiering targets are configured
- introduce 'TransitionedObject' struct for ease of usage
and understanding.
- multiple-pools optimization deletes don't need to hold
read locks verifying objects across namespace and pools.
improvements include
- skip IPv6 correctly
- do not set default value for
MINIO_SERVER_URL, let it be
configured if not use local IPs
Bonus:
- In healing return error from listPathRaw()
- update console to v0.8.3
Download files from *any* bucket/path as an encrypted zip file.
The key is included in the response but can be separated so zip
and the key doesn't have to be sent on the same channel.
Requires https://github.com/minio/pkg/pull/6
Create write lock on PutObject and CopyObject when on multi-pool setup.
Use the same lock as NewMultipartUpload so all creation calls share the same lock.
its possible that, version might exist on second pool such that
upon deleteBucket() might have deleted the bucket on pool1 successfully
since it doesn't have any objects, undo such operations properly in
all any error scenario.
Also delete bucket metadata from pool layer rather than sets layer.
- for single pool setups usage is not checked.
- for pools, only check the "set" in which it would be placed.
- keep a minimum number of inodes (when we know it).
- ignore for `.minio.sys`.
This is to ensure that there are no projects
that try to import `minio/minio/pkg` into
their own repo. Any such common packages should
go to `https://github.com/minio/pkg`
It is possible in some scenarios that in multiple pools,
two concurrent calls for the same object as a multipart operation
can lead to duplicate entries on two different pools.
This PR fixes this
- hold locks to serialize multiple callers so that we don't race.
- make sure to look for existing objects on the namespace as well
not just for existing uploadIDs
Harshavardhana
Klaus Post
Krishnan Parthasarathi
Anis Elleuch
Poorna
ebozduman
jiangfucheng