moonfire-nvr/guide/troubleshooting.md

Troubleshooting

Here are some tips for diagnosing various problems with Moonfire NVR. Feel free to open an issue if you need more help.

• Troubleshooting
  • Viewing Moonfire NVR's logs
    • Flushes
    • Panic errors
    • Slow operations
    • Camera stream errors
  • Problems
    • Error: pts not monotonically increasing; got 26615520 then 26539470
    • moonfire-nvr config displays garbage
    • Moonfire NVR reports problems with the database or filesystem
    • Errors in kernel logs
      • UAS errors
      • Filesystem errors

Viewing Moonfire NVR's logs

While Moonfire NVR is running, logs will be written to stderr.

• When running the configuration UI, you typically should redirect stderr to a text file to avoid poor interaction between the interactive stdout output and the logging. If you use the recommended nvr config 2>debug-log command, output will be in the debug-log file.
• When running detached through Docker, Docker saves the logs for you. Try nvr logs or docker logs moonfire-nvr.
• When running through systemd, stderr will be redirected to the journal. Try sudo journalctl --unit moonfire-nvr to view the logs. You also likely want to set MOONFIRE_FORMAT=google-systemd to format logs as expected by systemd.

Logging options are controlled by environment variables:

• MOONFIRE_LOG controls the log level. Its format is similar to the RUST_LOG variable used by the env-logger crate. MOONFIRE_LOG=info is the default. MOONFIRE_LOG=info,moonfire_nvr=debug gives more detailed logging of the moonfire_nvr crate itself.
• MOONFIRE_FORMAT selects the output format. The two options currently accepted are google (the default, like the Google glog package) and google-systemd (a variation for better systemd compatibility).
• MOONFIRE_COLOR controls color coding when using the google format. It accepts on, off, or auto. auto means to color code if stderr is a terminal.
• Errors include a backtrace if RUST_BACKTRACE=1 is set.

If you use Docker, set these via Docker's --env argument.

With the default MOONFIRE_FORMAT=google, log lines are in the following format:

I20210308 21:31:24.255 main moonfire_nvr] Success.
LYYYYmmdd HH:MM:SS.FFF TTTT PPPPPPPPPPPP] ...
L    = level:
       E = error
       W = warn
       I = info
       D = debug
       T = trace
YYYY = year
mm   = month
dd   = day
HH   = hour (using a 24-hour clock)
MM   = minute
SS   = second
FFF  = fractional portion of the second
TTTT = thread name (if set) or tid (otherwise)
PPPP = module path
...  = message body

Moonfire NVR names a few important thread types as follows:

• main: during moonfire-nvr run, the main thread does initial setup then just waits for the other threads. In other subcommands, it does everything.
• s-CAMERA-TYPE: there is one of these threads for every recorded stream (up to two per camera, where TYPE is main or sub). These threads read frames from the cameras via RTSP and write them to disk.
• sync-PATH: there is one of these threads for every sample file directory. These threads call fsync to commit sample files to disk, delete old sample files, and flush the database.

You can use the following command to teach lnav Moonfire NVR's log format:

$ lnav -i misc/moonfire_log.json

lnav versions prior to 0.9.0 print a (harmless) warning message on startup:

$ lnav -i git/moonfire-nvr/misc/moonfire_log.json
warning:git/moonfire-nvr/misc/moonfire_log.json:line 2
warning:  unexpected path --
warning:    /$schema
warning:  accepted paths --
warning:    /(?<format_name>\w+)/  -- The definition of a log file format.
info: installed: /home/slamb/.lnav/formats/installed/moonfire_log.json

You can avoid this by removing the $schema line from moonfire_log.json and rerunning the lnav -i command.

Below are some interesting log lines you may encounter.

Flushes

During normal operation, Moonfire NVR will periodically flush changes to its SQLite3 database. Every flush is logged, as in the following info message:

I20210308 23:14:18.388 sync-/media/14tb/sample moonfire_db::db] Flush 3810 (why: 120 sec after start of 1 minute 14 seconds courtyard-main recording 3/1842086):
/media/6tb/sample: added 98M 864K 842B in 8 recordings (4/1839795, 7/1503516, 6/1853939, 1/1838087, 2/1852096, 12/1516945, 8/1514942, 10/1506111), deleted 111M 435K 587B in 5 (4/1801170, 4/1801171, 6/1799708, 1/1801528, 2/1815572), GCed 9 recordings (6/1799707, 7/1376577, 4/1801168, 1/1801527, 4/1801167, 4/1801169, 10/1243252, 2/1815571, 12/1418785).
/media/14tb/sample: added 8M 364K 643B in 3 recordings (3/1842086, 9/1505359, 11/1516695), deleted 0B in 0 (), GCed 0 recordings ().

This log message is packed with debugging information:

• the date and time: 20210308 23:14:18.388.

• the name of the thread that prompted the flush: sync-/media/14tb/sample.

• a sequence number: 3810. This is handy for checking how often Moonfire NVR is flushing.

• a reason for the flush: 120 sec after start of 1 minute 14 seconds courtyard-main recording 3/1842086. This was a regular periodic flush at the flush_if_sec for the stream, as described in install.md. 3/1842086 is an identifier for the recording, in the form stream_id/recording_id. It corresponds to the file /media/14tb/sample/00000003001c1ba6. On-disk files are named by a fixed eight hexadecimal digits for the stream id and eight hexadecimal digits for the recording id. You can convert with printf:

  $ printf '%08x%08x\n' 3 1842086
  00000003001c1ba6
  

• For each affected sample file directory (/media/6tb/sample and /media/14tb/sample), a line showing the exact changes included in the flush. There are three kinds of changes:

  • added recordings–these files are already fully written in the sample file directory and now are being added to the database.
  • deleted recordings–these are being removed from the database's recording table (and added to the garbage table) in preparation for being deleted from the sample file directory. They can no longer be accessed after this flush.
  • GCed (garbage-collected) recordings—these have been fully removed from disk and no longer will be referenced in the database at all.

  You can learn more about these in the "Lifecycle of a recording" section of the recording schema design document.

  For added and deleted recordings, the line includes sizes in bytes (98M 864K 842B represents 10,3646,026 bytes, or about 99 MiB), numbers of recordings, and the IDs of each recording. For GCed recordings, the sizes are omitted (as this information is not stored).

Panic errors

Errors like the one below indicate a serious bug in Moonfire NVR. Please file a bug if you see one. It's helpful to set the RUST_BACKTRACE environment variable to include more information.

E20210304 11:09:29.230 main s-peck_west-main] panic at 'src/moonfire-nvr/server/db/writer.rs:750:54': should always be an unindexed sample

(set environment variable RUST_BACKTRACE=1 to see backtraces)"

In this case, a stream thread (one starting with s-) panicked. That stream won't record again until Moonfire NVR is restarted.

Slow operations

Warnings like the following indicate that some operation took more than 1 second to perform. PT2.070715796S means about 2 seconds.

It's normal to see these warnings on startup and occasionally while running. Frequent occurrences may indicate a performance problem.

W20201129 12:01:21.128 s-driveway-main moonfire_base::clock] opening rtsp://admin:redacted@192.168.5.108/cam/realmonitor?channel=1&subtype=0&unicast=true&proto=Onvif took PT2.070715796S!
W20201129 12:32:15.870 s-west_side-sub moonfire_base::clock] getting next packet took PT10.158121387S!
W20201228 12:09:29.050 s-back_east-sub moonfire_base::clock] database lock acquisition took PT8.122452
W20201228 21:22:32.012 main moonfire_base::clock] database operation took PT39.526386958S!
W20201228 21:27:11.402 s-driveway-sub moonfire_base::clock] writing 37 bytes took PT20.701894190S!

Camera stream errors

Warnings like the following indicate that a camera stream was lost due to some error and Moonfire NVR will try reconnecting shortly. In this case, End of file means that the camera ended the stream. This might happen when the camera is rebooting or if Moonfire is not consuming packets quickly enough. In the latter case, you'll likely see a getting next packet took PT...S! message as described above.

W20210309 00:28:55.527 s-courtyard-sub moonfire_nvr::streamer] courtyard-sub: sleeping for Duration { secs: 1, nanos: 0 } after error: End of file
(set environment variable RUST_BACKTRACE=1 to see backtraces)

Problems

Error: pts not monotonically increasing; got 26615520 then 26539470

If your streams cut out and you see error messages like this one in Moonfire NVR logs, it might mean that your camera outputs B frames. If you believe this is the case, file a feature request; Moonfire NVR currently doesn't support B frames. You may be able to configure your camera to disable B frames in the meantime.

moonfire-nvr config displays garbage

This happens if your machine is configured to a non-UTF-8 locale, due to gyscos/Cursive#13. As a workaround, try setting the environment variable LC_ALL=C.UTF-8. This should automatically be set with the Docker container.

Moonfire NVR reports problems with the database or filesystem

It's helpful to check out your system's overall health when diagnosing problems with Moonfire NVR.

1. Look at your kernel logs. On most Linux systems, you can browse them via journalctl, dmesg, or less /var/log/messages. See Errors in kernel logs below for some common problems.

2. Use smartctl to look at SMART ("Self-Monitoring, Analysis and Reporting Technology System (SMART)") attributes on your flash and hard drives. Backblaze reports that the following SMART attributes are most predictive of drive failure:

   • SMART 5: Reallocated Sectors Count
   • SMART 187: Reported Uncorrectable Errors
   • SMART 188: Command Timeout
   • SMART 197: Current Pending Sector Count
   • SMART 198: Uncorrectable Sector Count If the RAW value for any of these attributes is non-zero, it's likely your problem is due to hardware.

3. Use smartctl to run a self-test on your flash and hard drives.

4. Run fsck on your filesystems.

   Your root filesystem is best checked on startup, before it's mounted as read-write. On most Linux systems, you can force fsck to run on next startup via the fsck.mode=force kernel parameter, as documented here.

   If you have hard drives dedicated to Moonfire NVR, you can also shut down Moonfire NVR, unmount the filesystem, and run fsck on them without rebooting.

After the system as a whole is verified healthy, run moonfire-nvr check while Moonfire NVR is stopped to verify integrity of the SQLite database and sample file directories.

Errors in kernel logs

UAS errors

Some cheap USB SATA adapters don't appear to work reliably in UAS mode under Linux. If you see errors like the following, try disabling UAS. Unfortunately your filesystem is likely to have corruption, so after disabling UAS, run a fsck and then moonfire-nvr check to try recovering.

Sep 22 17:26:01 nuc kernel: sd 4:0:0:1: [sdb] tag#2 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD OUT
Sep 22 17:26:01 nuc kernel: sd 4:0:0:1: [sdb] tag#2 CDB: Write(16) 8a 00 00 00 00 01 4d b4 c4 00 00 00 03 b0 00 00

Filesystem errors

Errors that mention EXT4-fs (or your filesystem of choice) likely indicate filesystem corruption. Run fsck to fix as described above. Once the corruption is addressed, use moonfire-nvr check to survey the damage to your database.

Jan 28 07:26:27 nuc kernel: EXT4-fs (sdc1): error count since last fsck: 12
Jan 28 07:26:27 nuc kernel: EXT4-fs (sdc1): initial error at time 1576998292: ext4_validate_block_bitmap:376
Jan 28 07:26:27 nuc kernel: EXT4-fs (sdc1): last error at time 1579640202: ext4_validate_block_bitmap:376
...
Feb 13 04:48:43 nuc kernel: EXT4-fs error (device sdc1): ext4_validate_block_bitmap:376: comm kworker/u8:2: bg 57266: bad block bitmap checksum
Feb 13 04:48:43 nuc kernel: EXT4-fs (sdc1): Delayed block allocation failed for inode 7334278 at logical offset 0 with max blocks 11 with error 74
Feb 13 04:48:43 nuc kernel: EXT4-fs (sdc1): This should not happen!! Data will be lost