358 lines
15 KiB
Markdown
358 lines
15 KiB
Markdown
# Introduction
|
|
|
|
Moonfire NVR is an open-source security camera network video recorder, started
|
|
by Scott Lamb <<slamb@slamb.org>>. It saves H.264-over-RTSP streams from
|
|
IP cameras to disk into a hybrid format: video frames in a directory on
|
|
spinning disk, other data in a SQLite3 database on flash. It can construct
|
|
`.mp4` files for arbitrary time ranges on-the-fly. It does not decode,
|
|
analyze, or re-encode video frames, so it requires little CPU. It handles six
|
|
1080p/30fps streams on a [Raspberry Pi
|
|
2](https://www.raspberrypi.org/products/raspberry-pi-2-model-b/), using
|
|
less than 10% of the machine's total CPU.
|
|
|
|
So far, the web interface is basic: just a table with links to one-hour
|
|
segments of video. Although the backend supports generating `.mp4` files for
|
|
arbitrary time ranges, you have to construct URLs by hand. There's also no
|
|
support for motion detection, no authentication, and no config UI.
|
|
|
|
This is version 0.1, the initial release. Until version 1.0, there will be no
|
|
compatibility guarantees: configuration and storage formats may change from
|
|
version to version. There is an [upgrade procedure](guide/schema.md) but it is
|
|
not for the faint of heart.
|
|
|
|
I hope to add features such as salient motion detection. It's way too early to
|
|
make promises, but it seems possible to build a full-featured
|
|
hobbyist-oriented multi-camera NVR that requires nothing but a cheap machine
|
|
with a big hard drive. I welcome help; see [Getting help and getting
|
|
involved](#help) below. There are many exciting techniques we could use to
|
|
make this possible:
|
|
|
|
* avoiding CPU-intensive H.264 encoding in favor of simply continuing to use the
|
|
camera's already-encoded video streams. Cheap IP cameras these days provide
|
|
pre-encoded H.264 streams in both "main" (full-sized) and "sub" (lower
|
|
resolution, compression quality, and/or frame rate) varieties. The "sub"
|
|
stream is more suitable for fast computer vision work as well as
|
|
remote/mobile streaming. Disk space these days is quite cheap (with 3 TB
|
|
drives costing about $100), so we can afford to keep many camera-months of
|
|
both streams on disk.
|
|
* decoding and analyzing only select "key" video frames (see
|
|
[wikipedia](https://en.wikipedia.org/wiki/Video_compression_picture_types).
|
|
* off-loading expensive work to a GPU. Even the Raspberry Pi has a
|
|
surprisingly powerful GPU.
|
|
* using [HTTP Live Streaming](https://en.wikipedia.org/wiki/HTTP_Live_Streaming)
|
|
rather than requiring custom browser plug-ins.
|
|
* taking advantage of cameras' built-in motion detection. This is
|
|
the most obvious way to reduce motion detection CPU. It's a last resort
|
|
because these cheap cameras' proprietary algorithms are awful compared to
|
|
those described on [changedetection.net](http://changedetection.net).
|
|
Cameras have high false-positive and false-negative rates, are hard to
|
|
experiment with (as opposed to rerunning against saved video files), and
|
|
don't provide any information beyond if motion exceeded the threshold or
|
|
not.
|
|
|
|
# Downloading
|
|
|
|
See the [github page](https://github.com/scottlamb/moonfire-nvr) (in case
|
|
you're not reading this text there already). You can download the bleeding
|
|
edge version from the command line via git:
|
|
|
|
$ git clone https://github.com/scottlamb/moonfire-nvr.git
|
|
|
|
# Building from source
|
|
|
|
There are no binary packages of Moonfire NVR available yet, so it must be built
|
|
from source.
|
|
|
|
|
|
|
|
Moonfire NVR is written in the [Rust Programming
|
|
Language](https://www.rust-lang.org/en-US/). In the long term, I expect this
|
|
will result in a more secure, full-featured, easy-to-install software. In the
|
|
short term, there will be growing pains. Rust is a new programming language.
|
|
Moonfire NVR's primary author is new to Rust. And Moonfire NVR is a young
|
|
project.
|
|
|
|
You will need the following C libraries installed:
|
|
|
|
* [ffmpeg](http://ffmpeg.org/) version 2.x, including `libavutil`,
|
|
`libavcodec` (to inspect H.264 frames), and `libavformat` (to connect to RTSP
|
|
servers and write `.mp4` files).
|
|
|
|
Note ffmpeg 3.x isn't supported yet by the Rust `ffmpeg` crate; see
|
|
[rust-ffmpeg/issues/64](https://github.com/meh/rust-ffmpeg/issues/64).
|
|
|
|
Additionally, ffmpeg library versions older than 55.1.101, along with
|
|
55.1.101, along with all versions of the competing project
|
|
[libav](http://libav.org), don't not support socket timeouts for RTSP. For
|
|
reliable reconnections on error, it's strongly recommended to use ffmpeg
|
|
library versions >= 55.1.101.
|
|
|
|
* [SQLite3](https://www.sqlite.org/).
|
|
|
|
On Ubuntu 16.04.1 LTS or Raspbian Jessie, the following command will install
|
|
all non-Rust dependencies:
|
|
|
|
$ sudo apt-get install \
|
|
build-essential \
|
|
libavcodec-dev \
|
|
libavformat-dev \
|
|
libavutil-dev \
|
|
sqlite3 \
|
|
libsqlite3-dev \
|
|
uuid-runtime
|
|
|
|
uuid-runtime is only necessary if you wish to use the uuid command to generate
|
|
uuids for your cameras (see below). If you obtain them elsewhere, you can skip this
|
|
package.
|
|
|
|
Next, you need Rust and Cargo. The easiest way to install them is by following
|
|
the instructions at [rustup.rs](https://www.rustup.rs/). Note that Rust 1.13
|
|
has a serious bug on ARM ([see
|
|
announcement](https://blog.rust-lang.org/2016/11/10/Rust-1.13.html)); on those
|
|
platforms, prefer using Rust 1.14 betas instead.
|
|
|
|
You can continue to follow the build/install instructions below for a manual
|
|
build and install, or alternatively you can run the prep script called `prep.sh`.
|
|
|
|
$ cd moonfire-nvr
|
|
$ ./prep.sh
|
|
|
|
The script will take the following command line options, should you need them:
|
|
|
|
* `-D`: Skip database initialization.
|
|
* `-S`: Skip updating and installing dependencies through apt-get. This too can be
|
|
useful on repeated builds.
|
|
|
|
You can edit variables at the start of the script to influence names and
|
|
directories, but defaults should suffice in most cases. For details refer to
|
|
the script itself. We will mention just one option, needed when you follow the
|
|
suggestion to separate database and samples between flash storage and a hard disk.
|
|
If you have the hard disk mounted on, lets say `/media/nvr`, and you want to
|
|
store the video samples inside a directory named `samples` there, you would set:
|
|
|
|
SAMPLES_DIR=/media/nvr/samples
|
|
|
|
The script will perform all necessary steps to leave you with a fully built,
|
|
installed moonfire-nvr binary and (running) system service. The only thing
|
|
you'll have to do manually is add your camera configuration(s) to the database.
|
|
Alternatively, before running the script, you can create a file named `cameras.sql`
|
|
in the same directory as the `prep.sh` script and it will be automatically
|
|
included for you.
|
|
For instructions, you can skip to "[Camera configuration and hard disk mounting](#camera)".
|
|
|
|
Once prerequisites are installed, Moonfire NVR can be built as follows:
|
|
|
|
$ cargo test
|
|
$ cargo build --release
|
|
$ sudo install -m 755 target/release/moonfire-nvr /usr/local/bin
|
|
|
|
# Further configuration
|
|
|
|
Moonfire NVR should be run under a dedicated user. It keeps two kinds of
|
|
state:
|
|
|
|
* a SQLite database, typically <1 GiB. It should be stored on flash if
|
|
available.
|
|
* the "sample file directory", which holds the actual samples/frames of
|
|
H.264 video. This should be quite large and typically is stored on a hard
|
|
drive.
|
|
|
|
(See [guide/schema.md](guide/schema.md) for more information.)
|
|
|
|
Both kinds of state are intended to be accessed only by Moonfire NVR itself.
|
|
However, the interface for adding new cameras is not yet written, so you will
|
|
have to manually create the database and insert cameras with the `sqlite3`
|
|
command line tool prior to starting Moonfire NVR.
|
|
|
|
Manual commands would look something like this:
|
|
|
|
$ sudo addgroup --system moonfire-nvr
|
|
$ sudo adduser --system moonfire-nvr --home /var/lib/moonfire-nvr
|
|
$ sudo mkdir /var/lib/moonfire-nvr
|
|
$ sudo -u moonfire-nvr -H mkdir db sample
|
|
$ sudo -u moonfire-nvr sqlite3 ~moonfire-nvr/db/db < path/to/schema.sql
|
|
|
|
## <a name="cameras"></a>Camera configuration and hard drive mounting
|
|
|
|
If a dedicated hard drive is available, set up the mount point:
|
|
|
|
$ sudo vim /etc/fstab
|
|
$ sudo mount /var/lib/moonfire-nvr/sample
|
|
|
|
Once setup is complete, it is time to add camera configurations to the
|
|
database. However, the interface for adding new cameras is not yet written,
|
|
so you will have to manually insert cameras configurations with the `sqlite3`
|
|
command line tool prior to starting Moonfire NVR.
|
|
|
|
Before setting up a camera, it may be helpful to test settings with the
|
|
`ffmpeg` command line tool:
|
|
|
|
$ ffmpeg \
|
|
-i "rtsp://admin:12345@192.168.1.101:554/Streaming/Channels/1" \
|
|
-c copy \
|
|
-map 0:0 \
|
|
-rtsp_transport tcp \
|
|
-flags:v +global_header \
|
|
test.mp4
|
|
|
|
Once you have a working `ffmpeg` command line, insert the camera config as
|
|
follows. See the schema SQL file's comments for more information.
|
|
Note that the sum of `retain_bytes` for all cameras combined should be
|
|
somewhat less than the available bytes on the sample file directory's
|
|
filesystem, as the currently-writing sample files are not included in
|
|
this sum. Be sure also to subtract out the filesystem's reserve for root
|
|
(typically 5%).
|
|
|
|
In the following example, we generate a uuid which is then later used
|
|
to uniquely identify this camera. Thus, you will generate a new one for
|
|
each camera you insert using this method.
|
|
|
|
$ uuidgen | sed -e 's/-//g'
|
|
b47f48706d91414591cd6c931bf836b4
|
|
$ sudo -u moonfire-nvr sqlite3 ~moonfire-nvr/db/db
|
|
sqlite3> insert into camera (
|
|
...> uuid, short_name, description, host, username, password,
|
|
...> main_rtsp_path, sub_rtsp_path, retain_bytes,
|
|
...> next_recording_id) values (
|
|
...> X'b47f48706d91414591cd6c931bf836b4', 'driveway',
|
|
...> 'Longer description of this camera', '192.168.1.101',
|
|
...> 'admin', '12345', '/Streaming/Channels/1',
|
|
...> '/Streaming/Channels/2', 104857600, 0);
|
|
sqlite3> ^D
|
|
|
|
### Using automatic camera configuration inclusion with `prep.sh`
|
|
|
|
Not withstanding the instructions above, you can also prepare a file named
|
|
`cameras.sql` before you run the `prep.sh` script. The format of this file
|
|
should be something like in the example below for two cameras (SQL gives you
|
|
lots of freedom in the use of blank space and newlines, so this is formatted
|
|
for easy reading, and editing, and does not have to be altered in formatting,
|
|
but can if you wish and know what you are doing):
|
|
|
|
insert into camera (
|
|
uuid,
|
|
short_name, description,
|
|
host, username, password,
|
|
main_rtsp_path, sub_rtsp_path,
|
|
retain_bytes, next_recording_id
|
|
)
|
|
values
|
|
(
|
|
X'1c944181b8074b8083eb579c8e194451',
|
|
'Front Left', 'Front Left Driveway',
|
|
'192.168.1.41',
|
|
'admin', 'secret',
|
|
'/Streaming/Channels/1', '/Streaming/Channels/2',
|
|
346870912000, 0
|
|
),
|
|
(
|
|
X'da5921f493ac4279aafe68e69e174026',
|
|
'Front Right', 'Front Right Driveway',
|
|
'192.168.1.42',
|
|
'admin', 'secret',
|
|
'/Streaming/Channels/1', '/Streaming/Channels/2',
|
|
346870912000, 0
|
|
);
|
|
|
|
You'll still have to find the correct rtsp paths, usernames and passwords, and
|
|
set retained byte counts, as explained above.
|
|
|
|
## System Service
|
|
|
|
Moonfire NVR can be run as a systemd service. If you used `prep.sh` this has
|
|
been done for you. If not, Create
|
|
`/etc/systemd/system/moonfire-nvr.service`:
|
|
|
|
[Unit]
|
|
Description=Moonfire NVR
|
|
After=network-online.target
|
|
|
|
[Service]
|
|
ExecStart=/usr/local/bin/moonfire-nvr run \
|
|
--sample-file-dir=/var/lib/moonfire-nvr/sample \
|
|
--db-dir=/var/lib/moonfire-nvr/db \
|
|
--http-addr=0.0.0.0:8080
|
|
Environment=RUST_LOG=info
|
|
Type=simple
|
|
User=moonfire-nvr
|
|
Nice=-20
|
|
Restart=on-abnormal
|
|
CPUAccounting=true
|
|
MemoryAccounting=true
|
|
BlockIOAccounting=true
|
|
|
|
[Install]
|
|
WantedBy=multi-user.target
|
|
|
|
Note that the HTTP port currently has no authentication; it should not be
|
|
directly exposed to the Internet.
|
|
|
|
Complete the installation through `systemctl` commands:
|
|
|
|
$ sudo systemctl daemon-reload
|
|
$ sudo systemctl start moonfire-nvr.service
|
|
$ sudo systemctl status moonfire-nvr.service
|
|
$ sudo systemctl enable moonfire-nvr.service
|
|
|
|
See the [systemd](http://www.freedesktop.org/wiki/Software/systemd/)
|
|
documentation for more information. The [manual
|
|
pages](http://www.freedesktop.org/software/systemd/man/) for `systemd.service`
|
|
and `systemctl` may be of particular interest.
|
|
|
|
# Troubleshooting
|
|
|
|
While Moonfire NVR is running, logs will be written to stdout. The `RUST_LOG`
|
|
environmental variable controls the log level; `RUST_LOG=info` is recommended.
|
|
If running through systemd, try `sudo journalctl --unit moonfire-nvr` to view
|
|
the logs.
|
|
|
|
If Moonfire NVR crashes with a `SIGSEGV`, the problem is likely an
|
|
incompatible version of the C `ffmpeg` libraries; use the latest 2.x release
|
|
instead. This is one of the Rust growing pains mentioned above. While most
|
|
code written in Rust is "safe", the foreign function interface is not only
|
|
unsafe but currently error-prone.
|
|
|
|
# <a name="help"></a> Getting help and getting involved
|
|
|
|
Please email the
|
|
[moonfire-nvr-users]([https://groups.google.com/d/forum/moonfire-nvr-users)
|
|
mailing list with questions, bug reports, feature requests, or just to say
|
|
you love/hate the software and why.
|
|
|
|
I'd welcome help with testing, development (in Rust, JavaScript, and HTML),
|
|
user interface/graphic design, and documentation. Please email the mailing
|
|
list if interested. Patches are welcome, but I encourage you to discuss large
|
|
changes on the mailing list first to save effort.
|
|
|
|
# License
|
|
|
|
This file is part of Moonfire NVR, a security camera digital video recorder.
|
|
Copyright (C) 2016 Scott Lamb <slamb@slamb.org>
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
In addition, as a special exception, the copyright holders give
|
|
permission to link the code of portions of this program with the
|
|
OpenSSL library under certain conditions as described in each
|
|
individual source file, and distribute linked combinations including
|
|
the two.
|
|
|
|
You must obey the GNU General Public License in all respects for all
|
|
of the code used other than OpenSSL. If you modify file(s) with this
|
|
exception, you may extend this exception to your version of the
|
|
file(s), but you are not obligated to do so. If you do not wish to do
|
|
so, delete this exception statement from your version. If you delete
|
|
this exception statement from all source files in the program, then
|
|
also delete it here.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|