moonfire-nvr/db/dir.rs

373 lines
14 KiB
Rust
Raw Normal View History

// This file is part of Moonfire NVR, a security camera network video recorder.
// Copyright (C) 2018 Scott Lamb <slamb@slamb.org>
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// In addition, as a special exception, the copyright holders give
// permission to link the code of portions of this program with the
// OpenSSL library under certain conditions as described in each
// individual source file, and distribute linked combinations including
// the two.
//
// You must obey the GNU General Public License in all respects for all
// of the code used other than OpenSSL. If you modify file(s) with this
// exception, you may extend this exception to your version of the
// file(s), but you are not obligated to do so. If you do not wish to do
// so, delete this exception statement from your version. If you delete
// this exception statement from all source files in the program, then
// also delete it here.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
//! Sample file directory management.
//!
//! This includes opening files for serving, rotating away old files, and saving new files.
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
use crate::coding;
use crate::db::CompositeId;
use cstr::*;
use failure::{Error, Fail, bail, format_err};
use libc::c_char;
use log::warn;
use protobuf::Message;
use crate::schema;
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
use std::ffi;
use std::fs;
use std::io::{self, Read, Write};
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
use std::mem;
use std::os::unix::ffi::OsStrExt;
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
use std::os::unix::io::FromRawFd;
use std::sync::Arc;
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
/// The fixed length of a directory's `meta` file.
///
/// See DirMeta comments within proto/schema.proto for more explanation.
const FIXED_DIR_META_LEN: usize = 512;
/// A sample file directory. Typically one per physical disk drive.
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
///
/// If the directory is used for writing, the `start_syncer` function should be called to start
/// a background thread. This thread manages deleting files and writing new files. It synces the
/// directory and commits these operations to the database in the correct order to maintain the
/// invariants described in `design/schema.md`.
#[derive(Debug)]
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
pub struct SampleFileDir {
/// The open file descriptor for the directory. The worker uses it to create files and sync the
/// directory. Other threads use it to open sample files for reading during video serving.
pub(crate) fd: Fd,
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
}
/// A file descriptor associated with a directory (not necessarily the sample file dir).
#[derive(Debug)]
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
pub struct Fd(libc::c_int);
impl Drop for Fd {
fn drop(&mut self) {
if unsafe { libc::close(self.0) } < 0 {
let e = io::Error::last_os_error();
warn!("Unable to close sample file dir: {}", e);
}
}
}
impl Fd {
/// Opens the given path as a directory.
pub fn open(path: &str, mkdir: bool) -> Result<Fd, io::Error> {
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
let cstring = ffi::CString::new(path)
.map_err(|e| io::Error::new(io::ErrorKind::InvalidInput, e))?;
if mkdir && unsafe { libc::mkdir(cstring.as_ptr(), 0o700) } != 0 {
let e = io::Error::last_os_error();
if e.kind() != io::ErrorKind::AlreadyExists {
return Err(e.into());
}
}
let fd = unsafe { libc::open(cstring.as_ptr(), libc::O_DIRECTORY | libc::O_RDONLY, 0) };
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
if fd < 0 {
return Err(io::Error::last_os_error().into());
}
Ok(Fd(fd))
}
pub(crate) fn sync(&self) -> Result<(), io::Error> {
let res = unsafe { libc::fsync(self.0) };
if res < 0 {
return Err(io::Error::last_os_error())
}
Ok(())
}
/// Opens a sample file within this directory with the given flags and (if creating) mode.
pub(crate) unsafe fn openat(&self, p: *const c_char, flags: libc::c_int, mode: libc::c_int)
-> Result<fs::File, io::Error> {
let fd = libc::openat(self.0, p, flags, mode);
if fd < 0 {
return Err(io::Error::last_os_error())
}
Ok(fs::File::from_raw_fd(fd))
}
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
/// Locks the directory with the specified `flock` operation.
pub fn lock(&self, operation: libc::c_int) -> Result<(), io::Error> {
let ret = unsafe { libc::flock(self.0, operation) };
if ret < 0 {
return Err(io::Error::last_os_error().into());
}
Ok(())
}
pub fn statfs(&self) -> Result<libc::statvfs, io::Error> {
unsafe {
let mut stat: libc::statvfs = mem::zeroed();
if libc::fstatvfs(self.0, &mut stat) < 0 {
return Err(io::Error::last_os_error())
}
Ok(stat)
}
}
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
}
pub(crate) unsafe fn renameat(from_fd: &Fd, from_path: *const c_char,
to_fd: &Fd, to_path: *const c_char) -> Result<(), io::Error> {
let result = libc::renameat(from_fd.0, from_path, to_fd.0, to_path);
if result < 0 {
return Err(io::Error::last_os_error())
}
Ok(())
}
/// Reads `dir`'s metadata. If none is found, returns an empty proto.
pub(crate) fn read_meta(dir: &Fd) -> Result<schema::DirMeta, Error> {
let mut meta = schema::DirMeta::default();
let p = cstr!("meta");
let mut f = match unsafe { dir.openat(p.as_ptr(), libc::O_RDONLY, 0) } {
Err(e) => {
if e.kind() == ::std::io::ErrorKind::NotFound {
return Ok(meta);
}
return Err(e.into());
},
Ok(f) => f,
};
let mut data = Vec::new();
f.read_to_end(&mut data)?;
let (len, pos) = coding::decode_varint32(&data, 0)
.map_err(|_| format_err!("Unable to decode varint length in meta file"))?;
if data.len() != FIXED_DIR_META_LEN || len as usize + pos > FIXED_DIR_META_LEN {
bail!("Expected a {}-byte file with a varint length of a DirMeta message; got \
a {}-byte file with length {}", FIXED_DIR_META_LEN, data.len(), len);
}
let data = &data[pos..pos+len as usize];
let mut s = protobuf::CodedInputStream::from_bytes(&data);
meta.merge_from(&mut s).map_err(|e| e.context("Unable to parse metadata proto: {}"))?;
Ok(meta)
}
/// Write `dir`'s metadata, clobbering existing data.
pub(crate) fn write_meta(dir: &Fd, meta: &schema::DirMeta) -> Result<(), Error> {
let mut data = meta.write_length_delimited_to_bytes().expect("proto3->vec is infallible");
if data.len() > FIXED_DIR_META_LEN {
bail!("Length-delimited DirMeta message requires {} bytes, over limit of {}",
data.len(), FIXED_DIR_META_LEN);
}
data.resize(FIXED_DIR_META_LEN, 0); // pad to required length.
let path = cstr!("meta");
let mut f = unsafe { dir.openat(path.as_ptr(),
libc::O_CREAT | libc::O_WRONLY, 0o600)? };
let stat = f.metadata()?;
if stat.len() == 0 {
// Need to sync not only the data but also the file metadata and dirent.
f.write_all(&data)?;
f.sync_all()?;
dir.sync()?;
} else if stat.len() == FIXED_DIR_META_LEN as u64 {
// Just syncing the data will suffice; existing metadata and dirent are fine.
f.write_all(&data)?;
f.sync_data()?;
} else {
bail!("Existing meta file is {}-byte; expected {}", stat.len(), FIXED_DIR_META_LEN);
}
Ok(())
}
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
impl SampleFileDir {
/// Opens the directory using the given metadata.
///
/// `db_meta.in_progress_open` should be filled if the directory should be opened in read/write
/// mode; absent in read-only mode.
pub fn open(path: &str, db_meta: &schema::DirMeta)
-> Result<Arc<SampleFileDir>, Error> {
let read_write = db_meta.in_progress_open.is_some();
let s = SampleFileDir::open_self(path, false)?;
s.fd.lock(if read_write { libc::LOCK_EX } else { libc::LOCK_SH } | libc::LOCK_NB)?;
let dir_meta = read_meta(&s.fd)?;
if !SampleFileDir::consistent(db_meta, &dir_meta) {
let serialized =
db_meta.write_length_delimited_to_bytes().expect("proto3->vec is infallible");
bail!("metadata mismatch.\ndb: {:#?}\ndir: {:#?}\nserialized db: {:#?}",
db_meta, &dir_meta, &serialized);
}
if db_meta.in_progress_open.is_some() {
s.write_meta(db_meta)?;
}
Ok(s)
}
/// Returns true if the existing directory and database metadata are consistent; the directory
/// is then openable.
pub(crate) fn consistent(db_meta: &schema::DirMeta, dir_meta: &schema::DirMeta) -> bool {
if dir_meta.db_uuid != db_meta.db_uuid { return false; }
if dir_meta.dir_uuid != db_meta.dir_uuid { return false; }
if db_meta.last_complete_open.is_some() &&
(db_meta.last_complete_open != dir_meta.last_complete_open &&
db_meta.last_complete_open != dir_meta.in_progress_open) {
return false;
}
if db_meta.last_complete_open.is_none() && dir_meta.last_complete_open.is_some() {
return false;
}
true
}
pub(crate) fn create(path: &str, db_meta: &schema::DirMeta)
-> Result<Arc<SampleFileDir>, Error> {
let s = SampleFileDir::open_self(path, true)?;
s.fd.lock(libc::LOCK_EX | libc::LOCK_NB)?;
let old_meta = read_meta(&s.fd)?;
// Verify metadata. We only care that it hasn't been completely opened.
// Partial opening by this or another database is fine; we won't overwrite anything.
if old_meta.last_complete_open.is_some() {
bail!("Can't create dir at path {}: is already in use:\n{:?}", path, old_meta);
}
if !SampleFileDir::is_empty(path)? {
bail!("Can't create dir at path {} with existing files", path);
}
s.write_meta(db_meta)?;
Ok(s)
}
/// Determines if the directory is empty, aside form metadata.
pub(crate) fn is_empty(path: &str) -> Result<bool, Error> {
for e in fs::read_dir(path)? {
let e = e?;
match e.file_name().as_bytes() {
b"." | b".." => continue,
b"meta" => continue, // existing metadata is fine.
_ => return Ok(false),
}
}
Ok(true)
}
fn open_self(path: &str, create: bool) -> Result<Arc<SampleFileDir>, Error> {
let fd = Fd::open(path, create)
.map_err(|e| format_err!("unable to open sample file dir {}: {}", path, e))?;
Ok(Arc::new(SampleFileDir {
fd,
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
}))
}
/// Opens the given sample file for reading.
pub fn open_file(&self, composite_id: CompositeId) -> Result<fs::File, io::Error> {
let p = SampleFileDir::get_rel_pathname(composite_id);
unsafe { self.fd.openat(p.as_ptr(), libc::O_RDONLY, 0) }
}
pub fn create_file(&self, composite_id: CompositeId) -> Result<fs::File, io::Error> {
let p = SampleFileDir::get_rel_pathname(composite_id);
unsafe { self.fd.openat(p.as_ptr(), libc::O_WRONLY | libc::O_EXCL | libc::O_CREAT, 0o600) }
}
pub(crate) fn write_meta(&self, meta: &schema::DirMeta) -> Result<(), Error> {
write_meta(&self.fd, meta)
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
}
pub fn statfs(&self) -> Result<libc::statvfs, io::Error> { self.fd.statfs() }
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
/// Gets a pathname for a sample file suitable for passing to open or unlink.
fn get_rel_pathname(id: CompositeId) -> [libc::c_char; 17] {
let mut buf = [0u8; 17];
write!(&mut buf[..16], "{:016x}", id.0).expect("can't format id to pathname buf");
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
// libc::c_char seems to be i8 on some platforms (Linux/arm) and u8 on others (Linux/amd64).
unsafe { mem::transmute::<[u8; 17], [libc::c_char; 17]>(buf) }
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
}
/// Unlinks the given sample file within this directory.
pub(crate) fn unlink_file(&self, id: CompositeId) -> Result<(), io::Error> {
let p = SampleFileDir::get_rel_pathname(id);
let res = unsafe { libc::unlinkat(self.fd.0, p.as_ptr(), 0) };
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
if res < 0 {
return Err(io::Error::last_os_error())
}
Ok(())
}
/// Syncs the directory itself.
pub(crate) fn sync(&self) -> Result<(), io::Error> {
self.fd.sync()
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
}
}
/// Parses a composite id filename.
///
/// These are exactly 16 bytes, lowercase hex.
pub(crate) fn parse_id(id: &[u8]) -> Result<CompositeId, ()> {
if id.len() != 16 {
return Err(());
}
let mut v: u64 = 0;
for i in 0..16 {
v = (v << 4) | match id[i] {
b @ b'0'..=b'9' => b - b'0',
b @ b'a'..=b'f' => b - b'a' + 10,
_ => return Err(()),
} as u64;
}
Ok(CompositeId(v as i64))
}
#[cfg(test)]
mod tests {
use protobuf::prelude::MessageField;
use super::*;
#[test]
fn parse_id() {
use super::parse_id;
assert_eq!(parse_id(b"0000000000000000").unwrap().0, 0);
assert_eq!(parse_id(b"0000000100000002").unwrap().0, 0x0000000100000002);
parse_id(b"").unwrap_err();
parse_id(b"meta").unwrap_err();
parse_id(b"0").unwrap_err();
parse_id(b"000000010000000x").unwrap_err();
}
/// Ensures that a DirMeta with all fields filled fits within the maximum size.
#[test]
fn max_len_meta() {
let mut meta = schema::DirMeta::new();
let fake_uuid = &[0u8; 16][..];
meta.db_uuid.extend_from_slice(fake_uuid);
meta.dir_uuid.extend_from_slice(fake_uuid);
meta.last_complete_open.mut_message().id = u32::max_value();
meta.last_complete_open.mut_message().id = u32::max_value();
meta.in_progress_open.mut_message().uuid.extend_from_slice(fake_uuid);
meta.in_progress_open.mut_message().uuid.extend_from_slice(fake_uuid);
let data = meta.write_length_delimited_to_bytes().expect("proto3->vec is infallible");
assert!(data.len() <= FIXED_DIR_META_LEN, "{} vs {}", data.len(), FIXED_DIR_META_LEN);
}
}