moonfire-nvr/server/src/slices.rs

323 lines
9.7 KiB
Rust
Raw Normal View History

// This file is part of Moonfire NVR, a security camera network video recorder.
// Copyright (C) 2016 The Moonfire NVR Authors; see AUTHORS and LICENSE.txt.
// SPDX-License-Identifier: GPL-v3.0-or-later WITH GPL-3.0-linking-exception.
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
//! Tools for implementing a `http_serve::Entity` body composed from many "slices".
2016-12-17 02:11:08 -05:00
use crate::body::{wrap_error, BoxedError};
use base::format_err_t;
use failure::{bail, Error};
use futures::{stream, stream::StreamExt, Stream};
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
use std::fmt;
use std::ops::Range;
use std::pin::Pin;
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
/// Gets a byte range given a context argument.
/// Each `Slice` instance belongs to a single `Slices`.
pub trait Slice: fmt::Debug + Sized + Sync + 'static {
type Ctx: Send + Sync + Clone;
type Chunk: Send + Sync;
/// The byte position (relative to the start of the `Slices`) of the end of this slice,
/// exclusive. Note the starting position (and thus length) are inferred from the previous
/// slice. Must remain the same for the lifetime of the `Slice`.
fn end(&self) -> u64;
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
/// Gets the body bytes indicated by `r`, which is relative to this slice's start.
2016-12-17 02:11:08 -05:00
/// The additional argument `ctx` is as supplied to the `Slices`.
/// The additional argument `l` is the length of this slice, as determined by the `Slices`.
fn get_range(
&self,
ctx: &Self::Ctx,
r: Range<u64>,
len: u64,
) -> Box<dyn Stream<Item = Result<Self::Chunk, BoxedError>> + Sync + Send>;
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
fn get_slices(ctx: &Self::Ctx) -> &Slices<Self>;
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
}
2016-12-17 02:11:08 -05:00
/// Helper to serve byte ranges from a body which is broken down into many "slices".
/// This is used to implement `.mp4` serving in `mp4::File` from `mp4::Slice` enums.
pub struct Slices<S>
where
S: Slice,
{
2016-12-17 02:11:08 -05:00
/// The total byte length of the `Slices`.
/// Equivalent to `self.slices.back().map(|s| s.end()).unwrap_or(0)`; kept for convenience and
/// to avoid a branch.
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
len: u64,
2016-12-17 02:11:08 -05:00
/// 0 or more slices of this file.
slices: Vec<S>,
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
}
impl<S> fmt::Debug for Slices<S>
where
S: Slice,
{
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
write!(
f,
"{} slices with overall length {}:",
self.slices.len(),
self.len
)?;
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
let mut start = 0;
for (i, s) in self.slices.iter().enumerate() {
let end = s.end();
write!(
f,
"\ni {:7}: range [{:12}, {:12}) len {:12}: {:?}",
i,
start,
end,
end - start,
s
)?;
start = end;
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
}
Ok(())
}
}
impl<S> Slices<S>
where
S: Slice,
{
pub fn new() -> Self {
Slices {
len: 0,
slices: Vec::new(),
}
}
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
2016-12-17 02:11:08 -05:00
/// Reserves space for at least `additional` more slices to be appended.
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
pub fn reserve(&mut self, additional: usize) {
self.slices.reserve(additional)
}
/// Appends the given slice, which must have end > the Slices's current len.
pub fn append(&mut self, slice: S) -> Result<(), Error> {
if slice.end() <= self.len {
bail!(
"end {} <= len {} while adding slice {:?} to slices:\n{:?}",
slice.end(),
self.len,
slice,
self
);
}
self.len = slice.end();
self.slices.push(slice);
Ok(())
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
}
/// Returns the total byte length of all slices.
pub fn len(&self) -> u64 {
self.len
}
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
/// Returns the number of slices.
pub fn num(&self) -> usize {
self.slices.len()
}
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
2016-12-17 02:11:08 -05:00
/// Writes `range` to `out`.
/// This interface mirrors `http_serve::Entity::write_to`, with the additional `ctx` argument.
pub fn get_range(
&self,
ctx: &S::Ctx,
range: Range<u64>,
) -> Box<dyn Stream<Item = Result<S::Chunk, BoxedError>> + Sync + Send> {
2021-05-17 17:31:50 -04:00
#[allow(clippy::suspicious_operation_groupings)]
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
if range.start > range.end || range.end > self.len {
return Box::new(stream::once(futures::future::err(wrap_error(
format_err_t!(
Internal,
"Bad range {:?} for slice of length {}",
range,
self.len
),
))));
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
}
// Binary search for the first slice of the range to write, determining its index and
// (from the preceding slice) the start of its range.
let (i, slice_start) = match self.slices.binary_search_by_key(&range.start, |s| s.end()) {
Ok(i) => (i + 1, self.slices[i].end()), // desired start == slice i's end; first is i+1!
Err(i) if i == 0 => (0, 0), // desired start < slice 0's end; first is 0.
Err(i) => (i, self.slices[i - 1].end()), // desired start < slice i's end; first is i.
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
};
// Iterate through and write each slice until the end.
let start_pos = range.start - slice_start;
let bodies = stream::unfold(
(ctx.clone(), i, start_pos, slice_start),
move |(c, i, start_pos, slice_start)| {
let (body, min_end);
{
let self_ = S::get_slices(&c);
if i == self_.slices.len() {
return futures::future::ready(None);
}
let s = &self_.slices[i];
if range.end == slice_start + start_pos {
return futures::future::ready(None);
}
let s_end = s.end();
min_end = ::std::cmp::min(range.end, s_end);
let l = s_end - slice_start;
body = s.get_range(&c, start_pos..min_end - slice_start, l);
};
futures::future::ready(Some((Pin::from(body), (c, i + 1, 0, min_end))))
},
);
Box::new(bodies.flatten())
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
}
}
#[cfg(test)]
mod tests {
use super::{Slice, Slices};
use crate::body::BoxedError;
use db::testutil;
use futures::stream::{self, Stream, TryStreamExt};
use lazy_static::lazy_static;
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
use std::ops::Range;
use std::pin::Pin;
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
#[derive(Debug, Eq, PartialEq)]
pub struct FakeChunk {
slice: &'static str,
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
range: Range<u64>,
}
#[derive(Debug)]
pub struct FakeSlice {
end: u64,
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
name: &'static str,
}
impl Slice for FakeSlice {
type Ctx = &'static Slices<FakeSlice>;
type Chunk = FakeChunk;
fn end(&self) -> u64 {
self.end
}
fn get_range(
&self,
_ctx: &&'static Slices<FakeSlice>,
r: Range<u64>,
_l: u64,
) -> Box<dyn Stream<Item = Result<FakeChunk, BoxedError>> + Send + Sync> {
Box::new(stream::once(futures::future::ok(FakeChunk {
slice: self.name,
range: r,
})))
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
}
fn get_slices(ctx: &&'static Slices<FakeSlice>) -> &'static Slices<Self> {
*ctx
}
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
}
lazy_static! {
#[rustfmt::skip]
static ref SLICES: Slices<FakeSlice> = {
let mut s = Slices::new();
s.append(FakeSlice { end: 5, name: "a" }).unwrap();
s.append(FakeSlice { end: 5 + 13, name: "b" }).unwrap();
s.append(FakeSlice { end: 5 + 13 + 7, name: "c" }).unwrap();
s.append(FakeSlice { end: 5 + 13 + 7 + 17, name: "d" }).unwrap();
s.append(FakeSlice { end: 5 + 13 + 7 + 17 + 19, name: "e" }).unwrap();
s
};
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
}
async fn get_range(r: Range<u64>) -> Vec<FakeChunk> {
Pin::from(SLICES.get_range(&&*SLICES, r))
.try_collect()
.await
.unwrap()
}
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
#[test]
pub fn size() {
testutil::init();
assert_eq!(5 + 13 + 7 + 17 + 19, SLICES.len());
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
}
#[tokio::test]
pub async fn exact_slice() {
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
// Test writing exactly slice b.
testutil::init();
let out = get_range(5..18).await;
assert_eq!(
&[FakeChunk {
slice: "b",
range: 0..13
}],
&out[..]
);
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
}
#[tokio::test]
pub async fn offset_first() {
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
// Test writing part of slice a.
testutil::init();
let out = get_range(1..3).await;
assert_eq!(
&[FakeChunk {
slice: "a",
range: 1..3
}],
&out[..]
);
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
}
#[tokio::test]
pub async fn offset_mid() {
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
// Test writing part of slice b, all of slice c, and part of slice d.
testutil::init();
let out = get_range(17..26).await;
#[rustfmt::skip]
assert_eq!(
&[
FakeChunk { slice: "b", range: 12..13 },
FakeChunk { slice: "c", range: 0..7 },
FakeChunk { slice: "d", range: 0..1 },
],
&out[..]
);
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
}
#[tokio::test]
pub async fn everything() {
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
// Test writing the whole Slices.
testutil::init();
let out = get_range(0..61).await;
#[rustfmt::skip]
assert_eq!(
&[
FakeChunk { slice: "a", range: 0..5 },
FakeChunk { slice: "b", range: 0..13 },
FakeChunk { slice: "c", range: 0..7 },
FakeChunk { slice: "d", range: 0..17 },
FakeChunk { slice: "e", range: 0..19 },
],
&out[..]
);
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
}
#[tokio::test]
pub async fn at_end() {
testutil::init();
let out = get_range(61..61).await;
let empty: &[FakeChunk] = &[];
assert_eq!(empty, &out[..]);
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
}
}