mirror of
https://github.com/minio/minio.git
synced 2024-12-26 15:15:55 -05:00
020cc8b669
- removes backend/{fs,xl} files.
- removes FreeBSD doc since we already have FreeNAS doc.
- removes sets/ directory which is redundant with
large-bucket directory.
- removes browser/ directory which attempts
to explain about browser RPC calls, since
its an internal API we do not need to document it.
80 lines
4.2 KiB
Markdown
80 lines
4.2 KiB
Markdown
# Kernel Tuning for Minio Production Deployment on Linux Servers [](https://slack.minio.io) [](https://goreportcard.com/report/minio/minio) [](https://hub.docker.com/r/minio/minio/) [](https://codecov.io/gh/minio/minio)
|
||
|
||
## Tuning Network Parameters
|
||
|
||
Following network parameter settings can help ensure optimal Minio server performance on production workloads.
|
||
|
||
- *`tcp_fin_timeout`* : A socket left in memory takes approximately 1.5Kb of memory. It makes sense to close the unused sockets preemptively to ensure no memory leakage. This way, even if a peer doesn't close the socket due to some reason, the system itself closes it after a timeout. `tcp_fin_timeout` variable defines this timeout and tells kernel how long to keep sockets in the state FIN-WAIT-2. We recommend setting it to 30. You can set it as shown below
|
||
|
||
```sh
|
||
sysctl -w net.ipv4.tcp_fin_timeout=30
|
||
```
|
||
|
||
- *`tcp_keepalive_probes`* : This variable defines the number of unacknowledged probes to be sent before considering a connection dead. You can set it as shown below
|
||
|
||
```sh
|
||
sysctl -w net.ipv4.tcp_keepalive_probes=5
|
||
```
|
||
|
||
- *`wmem_max`*: This parameter sets the max OS send buffer size for all types of connections.
|
||
|
||
```sh
|
||
sysctl -w net.core.wmem_max=540000
|
||
```
|
||
|
||
- *`rmem_max`*: This parameter sets the max OS receive buffer size for all types of connections.
|
||
|
||
```sh
|
||
sysctl -w net.core.rmem_max=540000
|
||
```
|
||
|
||
## Tuning Virtual Memory
|
||
|
||
Recommended virtual memory settings are as follows.
|
||
|
||
- *`swappiness`* : This parameter controls the relative weight given to swapping out runtime memory, as opposed to dropping pages from the system page cache. It takes values from 0 to 100, both inclusive. We recommend setting it to 10.
|
||
|
||
```sh
|
||
sysctl -w vm.swappiness=10
|
||
```
|
||
|
||
- *`dirty_background_ratio`*: This is the percentage of system memory that can be filled with `dirty` pages, i.e. memory pages that still need to be written to disk. We recommend writing the data to the disk as soon as possible. To do this, set the `dirty_background_ratio` to 1.
|
||
|
||
```sh
|
||
sysctl -w vm.dirty_background_ratio=1
|
||
```
|
||
|
||
- *`dirty_ratio`*: This defines is the absolute maximum amount of system memory that can be filled with dirty pages before everything must get committed to disk.
|
||
|
||
```sh
|
||
sysctl -w vm.dirty_ratio=5
|
||
```
|
||
|
||
- *`Transparent Hugepage Support`*: This is a Linux kernel feature intended to improve performance by making more efficient use of processor’s memory-mapping hardware. But this may cause [problems](https://blogs.oracle.com/linux/performance-issues-with-transparent-huge-pages-thp) for non-optimized applications. As most Linux distributions set it to `enabled=always` by default, we recommend changing this to `enabled=madvise`. This will allow applications optimized for transparent hugepages to obtain the performance benefits, while preventing the associated problems otherwise.
|
||
|
||
```sh
|
||
echo madvise | sudo tee /sys/kernel/mm/transparent_hugepage/enabled
|
||
```
|
||
|
||
Also, set `transparent_hugepage=madvise` on your kernel command line (e.g. in /etc/default/grub) to persistently set this value.
|
||
|
||
## Tuning Scheduler
|
||
|
||
Proper scheduler configuration makes sure Minio process gets adequate CPU time. Here are the recommended scheduler settings
|
||
|
||
- *`sched_min_granularity_ns`*: This parameter decides the minimum time a task will be be allowed to run on CPU before being pre-empted out. We recommend setting it to 10ms.
|
||
|
||
```sh
|
||
sysctl -w kernel.sched_min_granularity_ns=10000000
|
||
```
|
||
|
||
- *`sched_wakeup_granularity_ns`*: Lowering this parameter improves wake-up latency and throughput for latency critical tasks, particularly when a short duty cycle load component must compete with CPU bound components.
|
||
|
||
```sh
|
||
sysctl -w kernel.sched_wakeup_granularity_ns=15000000
|
||
```
|
||
|
||
## Tuning Disks
|
||
|
||
The recommendations for disk tuning are conveniently packaged in a well commented [shell script](https://github.com/minio/minio/blob/master/docs/deployment/kernel-tuning/disk-tuning.sh). Please review the shell script for our recommendations.
|