mirror of
https://github.com/minio/minio.git
synced 2024-12-26 15:15:55 -05:00
77 lines
6.2 KiB
Markdown
77 lines
6.2 KiB
Markdown
# Distributed MinIO Quickstart Guide [](https://slack.min.io) [](https://goreportcard.com/report/minio/minio) [](https://hub.docker.com/r/minio/minio/)
|
||
|
||
MinIO in distributed mode lets you pool multiple drives (even on different machines) into a single object storage server. As drives are distributed across several nodes, distributed MinIO can withstand multiple node failures and yet ensure full data protection.
|
||
|
||
## Why distributed MinIO?
|
||
|
||
MinIO in distributed mode can help you setup a highly-available storage system with a single object storage deployment. With distributed MinIO, you can optimally use storage devices, irrespective of their location in a network.
|
||
|
||
### Data protection
|
||
|
||
Distributed MinIO provides protection against multiple node/drive failures and [bit rot](https://github.com/minio/minio/blob/master/docs/erasure/README.md#what-is-bit-rot-protection) using [erasure code](https://docs.min.io/docs/minio-erasure-code-quickstart-guide). As the minimum disks required for distributed MinIO is 4 (same as minimum disks required for erasure coding), erasure code automatically kicks in as you launch distributed MinIO.
|
||
|
||
### High availability
|
||
|
||
A stand-alone MinIO server would go down if the server hosting the disks goes offline. In contrast, a distributed MinIO setup with _n_ disks will have your data safe as long as _n/2_ or more disks are online. You'll need a minimum of _(n/2 + 1)_ [Quorum](https://github.com/minio/dsync#lock-process) disks to create new objects though.
|
||
|
||
For example, an 16-node distributed MinIO setup with 16 disks per node would continue serving files, even if up to 8 servers are offline. But, you'll need at least 9 servers online to create new objects.
|
||
|
||
### Limits
|
||
|
||
As with MinIO in stand-alone mode, distributed MinIO has a per tenant limit of minimum of 2 and maximum of 32 servers. There are no limits on number of disks across these servers. If you need a multiple tenant setup, you can easily spin up multiple MinIO instances managed by orchestration tools like Kubernetes, Docker Swarm etc.
|
||
|
||
Note that with distributed MinIO you can play around with the number of nodes and drives as long as the limits are adhered to. For example, you can have 2 nodes with 4 drives each, 4 nodes with 4 drives each, 8 nodes with 2 drives each, 32 servers with 64 drives each and so on.
|
||
|
||
You can also use [storage classes](https://github.com/minio/minio/tree/master/docs/erasure/storage-class) to set custom data and parity distribution per object.
|
||
|
||
### Consistency Guarantees
|
||
|
||
MinIO follows strict **read-after-write** and **list-after-write** consistency model for all i/o operations both in distributed and standalone modes.
|
||
|
||
# Get started
|
||
|
||
If you're aware of stand-alone MinIO set up, the process remains largely the same. MinIO server automatically switches to stand-alone or distributed mode, depending on the command line parameters.
|
||
|
||
## 1. Prerequisites
|
||
|
||
Install MinIO - [MinIO Quickstart Guide](https://docs.min.io/docs/minio-quickstart-guide).
|
||
|
||
## 2. Run distributed MinIO
|
||
|
||
To start a distributed MinIO instance, you just need to pass drive locations as parameters to the minio server command. Then, you’ll need to run the same command on all the participating nodes.
|
||
|
||
*Note*
|
||
|
||
- All the nodes running distributed MinIO need to have same access key and secret key for the nodes to connect. To achieve this, it is **mandatory** to export access key and secret key as environment variables, `MINIO_ACCESS_KEY` and `MINIO_SECRET_KEY`, on all the nodes before executing MinIO server command.
|
||
- All the nodes running distributed MinIO setup are recommended to be in homogeneous environment, i.e. same operating system, same number of disks and same network interconnects.
|
||
- MinIO distributed mode requires fresh directories. If required, the drives can be shared with other applications. You can do this by using a sub-directory exclusive to MinIO. For example, if you have mounted your volume under `/export`, pass `/export/data` as arguments to MinIO server.
|
||
- The IP addresses and drive paths below are for demonstration purposes only, you need to replace these with the actual IP addresses and drive paths/folders.
|
||
- Servers running distributed MinIO instances should be less than 15 minutes apart. You can enable [NTP](http://www.ntp.org/) service as a best practice to ensure same times across servers.
|
||
- Running Distributed MinIO on Windows operating system is experimental. Please proceed with caution.
|
||
- `MINIO_DOMAIN` environment variable should be defined and exported if domain is needed to be set.
|
||
|
||
Example 1: Start distributed MinIO instance on 32 nodes with 32 drives each mounted at `/export1` to `/export32` (pictured below), by running this command on all the 32 nodes:
|
||
|
||
|
||
#### GNU/Linux and macOS
|
||
|
||
```sh
|
||
export MINIO_ACCESS_KEY=<ACCESS_KEY>
|
||
export MINIO_SECRET_KEY=<SECRET_KEY>
|
||
minio server http://host{1...32}/export{1...32}
|
||
```
|
||
|
||
__NOTE:__ `{1...n}` shown have 3 dots! Using only 2 dots `{1..32}` will be interpreted by your shell and won't be passed to minio server, affecting the erasure coding order, which may impact performance and high availability. __Always use ellipses syntax `{1...n}` (3 dots!) for optimal erasure-code distribution__
|
||
|
||
## 3. Test your setup
|
||
To test this setup, access the MinIO server via browser or [`mc`](https://docs.min.io/docs/minio-client-quickstart-guide).
|
||
|
||
## Explore Further
|
||
- [MinIO Large Bucket Support Guide](https://docs.min.io/docs/minio-large-bucket-support-quickstart-guide)
|
||
- [MinIO Erasure Code QuickStart Guide](https://docs.min.io/docs/minio-erasure-code-quickstart-guide)
|
||
- [Use `mc` with MinIO Server](https://docs.min.io/docs/minio-client-quickstart-guide)
|
||
- [Use `aws-cli` with MinIO Server](https://docs.min.io/docs/aws-cli-with-minio)
|
||
- [Use `s3cmd` with MinIO Server](https://docs.min.io/docs/s3cmd-with-minio)
|
||
- [Use `minio-go` SDK with MinIO Server](https://docs.min.io/docs/golang-client-quickstart-guide)
|
||
- [The MinIO documentation website](https://docs.min.io)
|