The index was converted directly from bytes to binary. This would fail a roundtrip through json.
This would result in `Error: invalid input: magic number mismatch` when reading back.
On non-erasure backends store index as base64.
The httpStreamResponse should not return until CloseWithError has been called.
Instead keep track of write state and skip writing/flushing if an error has occurred.
Fixes#13743
Regression from #13597 (not released)
Go's atomic.Value does not support `nil` type,
concrete type is necessary to avoid any panics with
the current implementation.
Also remove boolean to turn-off tracking of freezeCount.
an active running speedTest will reject all
new S3 requests to the server, until speedTest
is complete.
this is to ensure that speedTest results are
accurate and trusted.
Co-authored-by: Klaus Post <klauspost@gmail.com>
Since JWT tokens remain valid for up to 15 minutes, we
don't have to regenerate tokens for every call.
Cache tokens for matching access+secret+audience
for up to 15 seconds.
```
BenchmarkAuthenticateNode/uncached-32 270567 4179 ns/op 2961 B/op 33 allocs/op
BenchmarkAuthenticateNode/cached-32 7684824 157.5 ns/op 48 B/op 1 allocs/op
```
Reduces internode call allocations a great deal.
FileInfo quorum shouldn't be passed down, instead
inferred after obtaining a maximally occurring FileInfo.
This PR also changes other functions that rely on
wrong quorum calculation.
Update tests as well to handle the proper requirement. All
these changes are needed when migrating from older deployments
where we used to set N/2 quorum for reads to EC:4 parity in
newer releases.
dataDir loosely based on maxima is incorrect and does not
work in all situations such as disks in the following order
- xl.json migration to xl.meta there may be partial xl.json's
leftover if some disks are not yet connected when the disk
is yet to come up, since xl.json mtime and xl.meta is
same the dataDir maxima doesn't work properly leading to
quorum issues.
- its also possible that XLV1 might be true among the disks
available, make sure to keep FileInfo based on common quorum
and skip unexpected disks with the older data format.
Also, this PR tests upgrade from older to a newer release if the
data is readable and matches the checksum.
NOTE: this is just initial work we can build on top of this to do further tests.
there is a corner case where the new check
doesn't work where dataDir has changed, especially
when xl.json -> xl.meta healing happens, if some
healing is partial this can make certain backend
files unreadable.
This PR fixes and updates unit-tests
This unit allows users to limit the maximum number of noncurrent
versions of an object.
To enable this rule you need the following *ilm.json*
```
cat >> ilm.json <<EOF
{
"Rules": [
{
"ID": "test-max-noncurrent",
"Status": "Enabled",
"Filter": {
"Prefix": "user-uploads/"
},
"NoncurrentVersionExpiration": {
"MaxNoncurrentVersions": 5
}
}
]
}
EOF
mc ilm import myminio/mybucket < ilm.json
```
currently getReplicationConfig() failure incorrectly
returns error on unexpected buckets upon upgrade, we
should always calculate usage as much as possible.
listing can fail and it is allowed to be retried,
instead of returning right away return an error at
the end - heal the rest of the buckets and objects,
and when we are retrying skip the buckets that
are already marked done by using the tracked buckets.
fixes#12972
- Go might reset the internal http.ResponseWriter() to `nil`
after Write() failure if the go-routine has returned, do not
flush() such scenarios and avoid spurious flushes() as
returning handlers always flush.
- fix some racy tests with the console
- avoid ticker leaks in certain situations
Existing:
```go
type xlMetaV2 struct {
Versions []xlMetaV2Version `json:"Versions" msg:"Versions"`
}
```
Serialized as regular MessagePack.
```go
//msgp:tuple xlMetaV2VersionHeader
type xlMetaV2VersionHeader struct {
VersionID [16]byte
ModTime int64
Type VersionType
Flags xlFlags
}
```
Serialize as streaming MessagePack, format:
```
int(headerVersion)
int(xlmetaVersion)
int(nVersions)
for each version {
binary blob, xlMetaV2VersionHeader, serialized
binary blob, xlMetaV2Version, serialized.
}
```
xlMetaV2VersionHeader is <= 30 bytes serialized. Deserialized struct
can easily be reused and does not contain pointers, so efficient as a
slice (single allocation)
This allows quickly parsing everything as slices of bytes (no copy).
Versions are always *saved* sorted by modTime, newest *first*.
No more need to sort on load.
* Allows checking if a version exists.
* Allows reading single version without unmarshal all.
* Allows reading latest version of type without unmarshal all.
* Allows reading latest version without unmarshal of all.
* Allows checking if the latest is deleteMarker by reading first entry.
* Allows adding/updating/deleting a version with only header deserialization.
* Reduces allocations on conversion to FileInfo(s).
This will help other projects like `health-analyzer` to verify that the
struct was indeed populated by the minio server, and is not
default-populated during unmarshalling of the JSON.
Signed-off-by: Shireesh Anjal <shireesh@minio.io>
legacy objects in 'xl.json' after upgrade, should have
following sequence of events - bucket should have versioning
enabled and the object should have been overwritten with
another version of an object.
this situation was not handled, which would lead to older
objects to stay perpetually with "legacy" dataDir, however
these objects were readable by all means - there weren't
converted to newer format.
This PR fixes this situation properly.
Add a new Prometheus metric for bucket replication latency
e.g.:
minio_bucket_replication_latency_ns{
bucket="testbucket",
operation="upload",
range="LESS_THAN_1_MiB",
server="127.0.0.1:9001",
targetArn="arn:minio:replication::45da043c-14f5-4da4-9316-aba5f77bf730:testbucket"} 2.2015663e+07
Co-authored-by: Klaus Post <klauspost@gmail.com>
container limits would not be properly honored in
our current implementation, mem.VirtualMemory()
function only reads /proc/meminfo which points to
the host system information inside the container.
This feature is useful in situations when console is exposed
over multiple intranent or internet entities when users are
connecting over local IP v/s going through load balancer.
Related console work was merged here
373bfbfe3f
- remove some duplicated code
- reported a bug, separately fixed in #13664
- using strings.ReplaceAll() when needed
- using filepath.ToSlash() use when needed
- remove all non-Go style comments from the codebase
Co-authored-by: Aditya Manthramurthy <donatello@users.noreply.github.com>
- add checks such that swapped disks are detected
and ignored - never used for normal operations.
- implement `unrecognizedDisk` to be ignored with
all operations returning `errDiskNotFound`.
- also add checks such that we do not load unexpected
disks while connecting automatically.
- additionally humanize the values when printing the errors.
Bonus: fixes handling of non-quorum situations in
getLatestFileInfo(), that does not work when 2 drives
are down, currently this function would return errors
incorrectly.
creating service accounts is implicitly enabled
for all users, this PR however adds support to
reject creating service accounts, with an explicit
"Deny" policy.
On first list resume or when specifying a custom markers entries could be missed in rare cases.
Do conservative truncation of entries when forwarding.
Replaces #13619
If a given MinIO config is dynamic (can be changed without restart),
ensure that it can be reset also without restart.
Signed-off-by: Shireesh Anjal <shireesh@minio.io>
when `MINIO_CACHE_COMMIT` is set.
- `writeback` caching applies only to single
uploads. When cache commit mode is
`writeback`, default multipart caching to be
synchronous.
- Add writethrough caching for single uploads
This commit makes the MinIO server behavior more consistent
w.r.t. key usage verification.
When MinIO verifies the client certificates it also checks
that the client certificate is valid of client authentication
(or any (i.e. wildcard) usage).
However, the MinIO server used to not verify the client key usage
when client certificate verification was disabled.
Now, the MinIO server verifies the client key usage even when
client certificate verification has been disabled. This makes
the MinIO behavior more consistent from a client's perspective.
Now, a client certificate has to be valid for client authentication
in all cases.
Signed-off-by: Andreas Auernhammer <hi@aead.dev>
Bonus: if runs have PUT higher then capture it anyways
to display an unexpected result, which provides a way
to understand what might be slowing things down on the
system.
For example on a Data24 WDC setup it is clearly visible
there is a bug in the hardware.
```
./mc admin speedtest wdc/
⠧ Running speedtest (With 64 MiB object size, 32 concurrency) PUT: 31 GiB/s GET: 24 GiB/s
⠹ Running speedtest (With 64 MiB object size, 48 concurrency) PUT: 38 GiB/s GET: 24 GiB/s
MinIO 2021-11-04T06:08:33Z, 6 servers, 48 drives
PUT: 38 GiB/s, 605 objs/s
GET: 24 GiB/s, 383 objs/s
```
Reads are almost 14GiB/sec slower than Writes which
is practically not possible.
This reverts commit 091a7ae359.
- Ensure all actions accessing storage lock properly.
- Behavior change: policies can be deleted only when they
are not associated with any active credentials.
Also adds fix for accidental canned policy removal that was present in the
reverted version of the change.
Windows users often click on the binary without
knowing MinIO is a command-line tool and should be
run from a terminal. Throw a message to guide them
on what to do.
Co-authored-by: Klaus Post <klauspost@gmail.com>
Borrowed idea from Go's usage of this
optimization for ReadFrom() on client
side, we should re-use the 32k buffers
io.Copy() allocates for generic copy
from a reader to writer.
the performance increase for reads for
really tiny objects is at this range
after this change.
> * Fastest: +7.89% (+1.3 MiB/s) throughput, +7.89% (+1308.1) obj/s
- Ensure all actions accessing storage lock properly.
- Behavior change: policies can be deleted only when they
are not associated with any active credentials.
- The race happens with a goroutine that refreshes IAM cache data from storage.
- It could lead to deleted users re-appearing as valid live credentials.
- This change also causes CI to run tests without a race flag (in addition to
running it with).
deleting collection of versions belonging
to same object, we can avoid re-reading
the xl.meta from the disk instead purge
all the requested versions in-memory,
the tradeoff is to allocate a map to de-dup
the versions, allow disks to be read only
once per object.
additionally reduce the data transfer between
nodes by shortening msgp data values.
- combine similar looking functionalities into single
handlers, and remove unnecessary proxying of the
requests at handler layer.
- remove bucket forwarding handler as part of default setup
add it only if bucket federation is enabled.
Improvements observed for 1kiB object reads.
```
-------------------
Operation: GET
Operations: 4538555 -> 4595804
* Average: +1.26% (+0.2 MiB/s) throughput, +1.26% (+190.2) obj/s
* Fastest: +4.67% (+0.7 MiB/s) throughput, +4.67% (+739.8) obj/s
* 50% Median: +1.15% (+0.2 MiB/s) throughput, +1.15% (+173.9) obj/s
```
Removes RLock/RUnlock for updating metadata,
since we already take a write lock to update
metadata, this change removes reading of xl.meta
as well as an additional lock, the performance gain
should increase 3x theoretically for
- PutObjectRetention
- PutObjectLegalHold
This optimization is mainly for Veeam like
workloads that require a certain level of iops
from these API calls, we were losing iops.
read/writers are not concurrent in handlers
and self contained - no need to use atomics on
them.
avoids unnecessary contentions where it's not
required.
Logger targets were not race protected against concurrent updates from for example `HTTPConsoleLoggerSys`.
Restrict direct access to targets and make slices immutable so a returned slice can be processed safely without locks.
As we use etcd's watch interface, we do not need the
network notifications as they are no-ops anyway.
Bonus: Remove globalEtcdClient global usage in IAM
IAMSys is a higher-level object, that should not be called by the lower-level
storage API interface for IAM. This is to prepare for further improvements in
IAM code.
etcd operations, get/put/delete, should be logged when failed
with errors other than not found error. It will make it easier to
see connections issues from MinIO to etcd.
Refresh was doing a linear scan of all locked resources. This was adding
up to significant delays in locking on high load systems with long
running requests.
Add a secondary index for O(log(n)) UID -> resource lookups.
Multiple resources are stored in consecutive strings.
Bonus fixes:
* On multiple Unlock entries unlock the write locks we can.
* Fix `expireOldLocks` skipping checks on entry after expiring one.
* Return fast on canTakeUnlock/canTakeLock.
* Prealloc some places.
We do not reliably know the length of compressed data, including headers.
Request until the end-of-stream. Results will still be properly truncated.
Fixes#13441
Testing with `mc sql --compression BZIP2 --csv-input "rd=\n,fh=USE,fd=;" --query="select COUNT(*) from S3Object" local2/testbucket/nyc-taxi-data-10M.csv.bz2`
Before 96.98s, after 10.79s. Uses about 70% CPU while running.
offset+length should match the Size() of the individual parts
return 'errFileCorrupt' otherwise, to trigger healing of the individual
parts do not error out prematurely when healing such bitrot's upon
successful parts being written to the client.
another issue this PR fixes is to not return and error to
the client if we have just triggered a heal on a specific
part of the object, instead continue to read all the content
and let the heal happen asynchronously later.
Looks like policy restriction was not working properly
for normal users when they are not svc or STS accounts.
- svc accounts are now properly fixed to get
right permissions when its inherited, so
we do not have to set 'owner = true'
- sts accounts have always been using right
permissions, do not need an explicit lookup
- regular users always have proper policy mapping
- avoids relying in listQuorum from the underlying listObjects()
and potentially missing entries if any.
- avoid the entire merging logic etc, listing raw set by set
and loading whatever is found is cleaner when dealing with
a large cluster for IAM metadata.
* fix: disallow invalid x-amz-security-token for root credentials
fixes#13335
This was a regression added in #12947 when this part of the
code was refactored to avoid privilege issues with service
accounts with session policy.
Bonus:
- fix: AssumeRoleWithCertificate policy mapping and reload
AssumeRoleWithCertificate was not mapping to correct
policies even after successfully generating keys, since
the claims associated with this API were never looked up
properly. Ensure that policies are set appropriately.
- GetUser() API was not loading policies correctly based
on AccessKey based mapping which is true with OpenID
and AssumeRoleWithCertificate API.
with some broken clients allow non-strict validation
of sha256 when ContentLength > 0, it has been found in
the wild some applications that need this behavior. This
shall be only allowed if `--no-compat` is used.
change credentials handling such that
prefer MINIO_* envs first if they work,
if not fallback to AWS credentials. If
they fail we fail to start anyways.
This change allows a set of MinIO sites (clusters) to be configured
for mutual replication of all buckets (including bucket policies, tags,
object-lock configuration and bucket encryption), IAM policies,
LDAP service accounts and LDAP STS accounts.
In (erasureServerPools).MakeBucketWithLocation deletes the created
buckets if any set returns an error.
Add `NoRecreate` option, which will not recreate the bucket
in `DeleteBucket`, if the operation fails.
Additionally use context.Background() for operations we always want to be performed.
bucket deletes should purge entire bucket metadata
appropriately, use rename() to move the metadata files
to trash folder,
for dangling buckets instead of doing recursive deletes,
rename such buckets to trash folder as well.
Bonus: reduce retry duration for listing to 200ms
additionally optimize for IP only setups, avoid doing
unnecessary lookups if the Dial addr is an IP.
allow support for multiple listeners on same socket,
this is mainly meant for future purposes.
DeleteMarkers were unreadable if they had quorum based
guarantees, this PR tries to fix this behavior appropriately.
DeleteMarkers with sufficient should be allowed and the
return error should be accordingly with or without version-id.
This also allows for overwrites which may not be possible
in a multi-pool setup.
fixes#12787
it would seem like using `bufio.Scan()` is very
slow for heavy concurrent I/O, ie. when r.Body
is slow , instead use a proper
binary exchange format, to marshal and unmarshal
the LockArgs datastructure in a cleaner way.
this PR increases performance of the locking
sub-system for tiny repeated read lock requests
on same object.
```
BenchmarkLockArgs
BenchmarkLockArgs-4 6417609 185.7 ns/op 56 B/op 2 allocs/op
BenchmarkLockArgsOld
BenchmarkLockArgsOld-4 1187368 1015 ns/op 4096 B/op 1 allocs/op
```
This PR brings two optimizations mainly
for page-cache build-up and how to avoid
getting OOM killed in the process. Although
these memories are reclaimable Linux is not
fast enough to reclaim them as needed on a
very busy system. fadvise is a system call
implemented in Linux to advise page-cache to
avoid overload as we get significant amount
of requests on the server.
- FADV_SEQUENTIAL tells that all I/O from now
is going to be sequential, allowing for more
resposive throughput.
- FADV_NOREUSE tells kernel to start removing
things for this 'fd' from page-cache.
An endpoint can be empty when a disk is offline or something
wrong with it. Avoid it by filling erasureSets.endpointStrings
with values from arguments.
This was a regression introduced in '14bb969782'
this has the potential to cause corruption when
there are concurrent overwrites attempting to update
the content on the namespace.
This PR adds a situation where PutObject(), CopyObject()
compete properly for the same locks with NewMultipartUpload()
however it ends up turning off competing locks for the actual
object with GetObject() and DeleteObject() - since they do not
compete due to concurrent I/O on a versioned bucket it can lead
to loss of versions.
This PR fixes this bug with multi-pool setup with replication
that causes corruption of inlined data due to lack of competing
locks in a multi-pool setup.
Instead CompleteMultipartUpload holds the necessary
locks when finishing the transaction, knowing the exact
location of an object to schedule the multipart upload
doesn't need to compete in this manner, a pool id location
for existing object.
This reverts commit 91567ba916.
Revert because the error was incorrectly converted, there are
callers that rely on errConfigNotFound and it also took away
the migration code.
Instead the correct fix is PutBucketTaggingHandler() which
is already added.
also remove HealObjects() code from dataScanner running another
listing from the data-scanner is super in-efficient and in-fact
this code is redundant since we already attempt to heal all
dangling objects anyways.
- Supports object locked buckets that require
PutObject() to set content-md5 always.
- Use SSE-S3 when S3 gateway is being used instead
of SSE-KMS for auto-encryption.
This PR however also proceeds to simplify the loading
of various subsystems such as
- globalNotificationSys
- globalTargetSys
converge them directly into single bucket metadata sys
loader, once that is loaded automatically every other
target should be loaded and configured properly.
fixes#13252
DeleteObject() on existing objects before `xl.json` to
`xl.meta` change were not working, not sure when this
regression was added. This PR fixes this properly.
Also this PR ensures that we perform rename of xl.json
to xl.meta only during "write" phase of the call i.e
either during Healing or PutObject() overwrites.
Also handles few other scenarios during migration where
`backendEncryptedFile` was missing deleteConfig() will
fail with `configNotFound` this case was not ignored,
which can lead to failure during upgrades.
once we have competed for locks, verify if the
context is still valid - this is to ensure that
we do not start readdir() or read() calls on the
drives on canceled connections.
This commit brings two locks instead of single lock for
WalkDir() calls on top of c25816eabc.
The main reason is to avoid contention between readMetadata()
and ListDir() calls, ListDir() can take time on prefixes that
are huge for readdir() but this shouldn't end up blocking
all readMetadata() operations, this allows for more room for
I/O while not overly penalizing all listing operations.
This commit fixes an issue in the `AssumeRoleWithCertificate`
handler.
Before clients received an error when they send
a chain of X.509 certificates (their client certificate as
well as intermediate / root CAs).
Now, client can send a certificate chain and the server
will only consider non-CA / leaf certificates as possible
client certificate candidates. However, the client still
can only send one certificate.
Signed-off-by: Andreas Auernhammer <hi@aead.dev>
When unable to load existing metadata new versions
would not be written. This would leave objects in a
permanently unrecoverable state
Instead, start with clean metadata and write the incoming data.
Some identity providers like GitLab do not provide
information about group membership as part of the
identity token claims. They only expose it via OIDC compatible
'/oauth/userinfo' endpoint, as described in the OpenID
Connect 1.0 sepcification.
But this of course requires application to make sure to add
additional accessToken, since idToken cannot be re-used to
perform the same 'userinfo' call. This is why this is specialized
requirement. Gitlab seems to be the only OpenID vendor that requires
this support for the time being.
fixes#12367
Don't perform an independent evaluation of inlining, but mirror the decision made when uploading the object.
Leads to some objects being inlined or not based on new metrics. Instead respect previous decision.
Replication was not working properly for encrypted
objects in single PUT object for preserving etag,
We need to make sure to preserve etag such that replication
works properly and not gets into infinite loops of copying
due to ETag mismatches.
This will allow objects to relinquish read lock held during
replication earlier if the target is known to be down
without waiting for connection timeout when replication
is attempted.
Stop async listing if we have not heard back from the client for 3 minutes.
This will stop spending resources on async listings when they are unlikely to get used.
If the client returns a new listing will be started on the second request.
Stop saving cache metadata to disk. It is cleared on restarts anyway. Removes all
load/save functionality
This commit adds a new STS API for X.509 certificate
authentication.
A client can make an HTTP POST request over a TLS connection
and MinIO will verify the provided client certificate, map it to an
S3 policy and return temp. S3 credentials to the client.
So, this STS API allows clients to authenticate with X.509
certificates over TLS and obtain temp. S3 credentials.
For more details and examples refer to the docs/sts/tls.md
documentation.
Signed-off-by: Andreas Auernhammer <hi@aead.dev>
Azure storage SDK uses http.Request feature which panics when the
request contains r.Form popuplated.
Azure gateway code creates a new request, however it modifies the
transport to add our metrics code which sets Request.Form during
shouldMeterRequest() call.
This commit simplifies shouldMeterRequest() to avoid setting
request.Form and avoid the crash.
console service should be shutdown last once all shutdown
sequences are complete, this is to ensure that we do not
prematurely kill the server before it cleans up the
`.minio.sys/tmp/uuid` folder.
NOTE: this only applies to NAS gateway setup.
Use a single allocation for reading the file, not the growing buffer of `io.ReadAll`.
Reuse the write buffer if we can when writing metadata in RenameData.
* reduce extra getObjectInfo() calls during ILM transition
This PR also changes expiration logic to be non-blocking,
scanner is now free from additional costs incurred due
to slower object layer calls and hitting the drives.
* move verifying expiration inside locks
A multi resources lock is a single lock UID with multiple associated
resources. This is created for example by multi objects delete
operation. This commit changes the behavior of Refresh() to iterate over
all locks having the same UID and refresh them.
Bonus: Fix showing top locks for multi delete objects
#11878 added "keepHTTPResponseAlive" to CreateFile requests.
The problem is that it will begin writing to the response before the
body is read after 10 seconds. This will abort the writes on the
client-side, since it assumes the server has received what it wants.
The proposed solution here is to monitor the completion of the body
before beginning to send keepalive pings.
Fixes observed high number of goroutines stuck in `io.Copy` in
`github.com/minio/minio/cmd.(*xlStorage).CreateFile` and
`(*storageRESTClient).CreateFile` stuck in `http.DrainBody`.
In the event when a lock is not refreshed in the cluster, this latter
will be automatically removed in the subsequent cleanup of non
refreshed locks routine, but it forgot to clean the local server,
hence having the same weird stale locks present.
This commit will remove the lock locally also in remote nodes, if
removing a lock from a remote node will fail, it will be anyway
removed later in the locks cleanup routine.
Currently in master this can cause existing
parent users to stop working and lead to
credentials getting overwritten.
```
~ mc admin user add alias/ minio123 minio123456
```
```
~ mc admin user svcacct add alias/ minio123 \
--access-key minio123 --secret-key minio123456
```
This PR rejects all such scenarios.
Faster healing as well as making healing more
responsive for faster scanner times.
also fixes a bug introduced in #13079, newly replaced
disks were not healing automatically.
- remove sourceCh usage from healing
we already have tasks and resp channel
- use read locks to lookup globalHealConfig
- fix healing resolver to pick candidates quickly
that need healing, without this resolver was
unexpectedly skipping.
healObject() should be non-blocking to ensure
that scanner is not blocked for a long time,
this adversely affects performance of the scanner
and also affects the way usage is updated
subsequently.
This PR allows for a non-blocking behavior for
healing, dropping operations that cannot be queued
anymore.
Synchronize bucket cycles so it is much more
likely that the same prefixes will be picked up
for scanning.
Use the global bloom filter cycle for that.
Bump bloom filter versions to clear those.
The intention is to list values of sys config that can potentially
impact the performance of minio.
At present, it will return max value configured for rlimit
Signed-off-by: Shireesh Anjal <shireesh@minio.io>
Co-authored-by: Harshavardhana <harsha@minio.io>
proceed to heal the cluster when all the
drives in a set have failed, this is extremely
rare occurrence but even if it happens we allow
the cluster to be functional.
A recent regression caused new disks not being re-formatted. In the old
code, a disk needed be 'online' to be chosen to be formatted but the
disk has to be already formatted for XL storage IsOnline() function to
return true.
It is enough to check if XL storage is nil or not if we want to avoid
formatting root disks.
Co-authored-by: Anis Elleuch <anis@min.io>
markRootDisksAsDown() relies on disk info even if the
disk is unformatted. Therefore, we should always return
DiskInfo data even when DiskInfo storage API returns
errUnformattedDisk
`mc admin heal` command will show servers/disks tolerance, for that
purpose, you need to know the number of parity disks for each storage
class.
Parity is always the same in all pools.
prefixes at top level create such as
```
~ mc mb alias/bucket/prefix
```
The prefix/ incorrect appears as prefix__XL_DIR__/
in the accountInfo output, make sure to trim '__XL_DIR__'
Objects uploaded in this format for example
```
mc cp /etc/hosts alias/bucket/foo/bar/xl.meta
mc ls -r alias/bucket/foo/bar
```
Won't list the object, handle this scenario.
Ensure that one call will succeed and others will serialize
Example failure without code in place:
```
bucket-policy-handlers_test.go:120: unexpected error: cmd.InsufficientWriteQuorum: Storage resources are insufficient for the write operation doz2wjqaovp5kvlrv11fyacowgcvoziszmkmzzz9nk9au946qwhci4zkane5-1/
bucket-policy-handlers_test.go:120: unexpected error: cmd.InsufficientWriteQuorum: Storage resources are insufficient for the write operation doz2wjqaovp5kvlrv11fyacowgcvoziszmkmzzz9nk9au946qwhci4zkane5-1/
bucket-policy-handlers_test.go:135: want 1 ok, got 0
```
We are observing heavy system loads, potentially
locking the system up for periods when concurrent
listing operations are performed.
We place a per-disk lock on walk IO operations.
This will minimize the impact of concurrent listing
operations on the entire system and de-prioritize
them compared to other operations.
Single list operations should remain largely unaffected.
Some applications albeit poorly written rather than using headObject
rely on listObjects to check for existence of object, this unusual
request always has prefix=(to actual object) and max-keys=1
handle this situation specially such that we can avoid readdir()
on the top level parent to avoid sorting and skipping, ensuring
that such type of listObjects() always behaves similar to a
headObject() call.
this addresses a regression from #12984
which only addresses flat key from single
level deep at bucket level.
added extra tests as well to cover all
these scenarios.
- deletes should always Sweep() for tiering at the
end and does not need an extra getObjectInfo() call
- puts, copy and multipart writes should conditionally
do getObjectInfo() when tiering targets are configured
- introduce 'TransitionedObject' struct for ease of usage
and understanding.
- multiple-pools optimization deletes don't need to hold
read locks verifying objects across namespace and pools.
baseDir is empty if the top level prefix does not
end with `/` this causes large recursive listings
without any filtering, to fix this filtering make
sure to set the filter prefix appropriately.
also do not navigate folders at top level that do
not match the filter prefix, entries don't need
to match prefix since they are never prefixed
with the prefix anyways.
The previous code removes SVC/STS accounts for ldap users that do not
exist anymore in LDAP server. This commit will actually re-evaluate
filter as well if it is changed and remove all local SVC/STS accounts
beloning to the ldap user if the latter is not eligible for the
search filter anymore.
For example: the filter selects enabled users among other criteras in
the LDAP database, if one ldap user changes his status to disabled
later, then associated SVC/STS accounts will be removed because that user
does not meet the filter search anymore.
Traffic metering was not protected against concurrent updates.
```
WARNING: DATA RACE
Read at 0x00c02b0dace8 by goroutine 235:
github.com/minio/minio/cmd.setHTTPStatsHandler.func1()
d:/minio/minio/cmd/generic-handlers.go:360 +0x27d
net/http.HandlerFunc.ServeHTTP()
...
Previous write at 0x00c02b0dace8 by goroutine 994:
github.com/minio/minio/internal/http/stats.(*IncomingTrafficMeter).Read()
d:/minio/minio/internal/http/stats/http-traffic-recorder.go:34 +0xd2
```
The intention is to provide status of any sys services that can
potentially impact the performance of minio.
At present, it will return information about the `selinux` service
(not-installed/disabled/permissive/enforcing)
Signed-off-by: Shireesh Anjal <shireesh@minio.io>
This happens because of a change added where any sub-credential
with parentUser == rootCredential i.e (MINIO_ROOT_USER) will
always be an owner, you cannot generate credentials with lower
session policy to restrict their access.
This doesn't affect user service accounts created with regular
users, LDAP or OpenID
Use `readMetadata` when reading version
information without data requested.
Reduces IO on inlined data.
Bonus: Inline compressed data as well when
compression is enabled.
- avoid extra lookup for 'xl.meta' since we are
definitely sure that it doesn't exist.
- use this in newMultipartUpload() as well
- also additionally do not write with O_DSYNC
to avoid loading the drives, instead create
'xl.meta' for listing operations without
O_DSYNC since these are ephemeral objects.
- do the same with newMultipartUpload() since
it gets synced when the PutObjectPart() is
attempted, we do not need to tax newMultipartUpload()
instead.
removes unexpected features from regular putObject() such as
- increasing parity when disks are down, avoids
a lot of DiskInfo() calls.
- triggering MRF for metacache objects
if disks are offline
- avoiding renames from temporary location
to actual namespace, not needed since
metacache files are unique.
Disregard interfaces that are down when selecting bind addresses
Windows often has a number of disabled NICs used for VPN and other services.
This often causes minio to select an address for contacting the console that is on a disabled (virtual) NIC.
This checks if the interface is up before adding it to the pool on Windows.
Before, the gateway will complain that it found KMS configured in the
environment but the gateway mode does not support encryption. This
commit will allow starting of the gateway but ensure that S3 operations
with encryption headers will fail when the gateway doesn't support
encryption. That way, the user can use etcd + KMS and have IAM data
encrypted in the etcd store.
Co-authored-by: Anis Elleuch <anis@min.io>
improvements include
- skip IPv6 correctly
- do not set default value for
MINIO_SERVER_URL, let it be
configured if not use local IPs
Bonus:
- In healing return error from listPathRaw()
- update console to v0.8.3
Remote caches were not returned correctly, so they would not get updated on save.
Furthermore make some tweaks for more reliable updates.
Invalidate bloom filter to ensure rescan.
we will allow situations such as
```
a/b/1.txt
a/b
```
and
```
a/b
a/b/1.txt
```
we are going to document that this usecase is
not supported and we will never support it, if
any application does this users have to delete
the top level parent to make sure namespace is
accessible at lower level.
rest of the situations where the prefixes get
created across sets are supported as is.
its possible that some multipart uploads would have
uploaded only single parts so relying on `len(o.Parts)`
alone is not sufficient, we need to look for ETag
pattern to be absolutely sure.
Some incorrect setups might have multiple audiences
where they are trying to use a single authentication
endpoint for multiple services.
Nevertheless OpenID spec allows it to make it
even more confusin for no good reason.
> It MUST contain the OAuth 2.0 client_id of the
> Relying Party as an audience value. It MAY also
> contain identifiers for other audiences. In the
> general case, the aud value is an array of case
> sensitive strings. In the common special case
> when there is one audience, the aud value MAY
> be a single case sensitive string.
fixes#12809
this healing optimization caused multiple
regressions in healing
- delete-markers incorrectly missing
heal and returning incorrect healing
results to client.
- missing individual 'parts' such
as for restored object or simply
for all objects just missing few parts.
This optimization is not necessary, we
should proceed to verify all cases possible
not just when metadata is inconsistent.
destination path and old path will be similar
when healing occurs, this can lead to healed
parts being again purged leading to always an
inconsistent state on an object which might
further cause reduction in quorum eventually.
delete-markers missing on drives were
not healed due to few things
disksWithAllParts() does not know-how
to deal with delete markers, add support
for that.
fixes#12787
- delete-markers are incorrectly reported
as corrupt with wrong data sent to client
'mc admin heal -r' on objects with delete
marker will report as 'grey' incorrectly.
- do not heal delete-markers during HeadObject()
this can lead to inconsistent order of heals
on the object, although this is not an issue
in terms of order of versions it is rather
simpler to keep the same order on all drives.
- defaultHealResult() should handle 'err == nil'
case such that valid cases should be handled
as 'drive' status OK.
- remove use of getOnlineDisks() instead rely on fallbackDisks()
when disk return errors like diskNotFound, unformattedDisk
use other fallback disks to list from, instead of paying the
price for checking getOnlineDisks()
- optimize getDiskID() further to avoid large write locks when
looking formatLastCheck time window
This new change allows for a more relaxed fallback for listing
allowing for more tolerance and also eventually gain more
consistency in results even if using '3' disks by default.
When configured in Lookup Bind mode, the server now periodically queries the
LDAP IDP service to find changes to a user's group memberships, and saves this
info to update the access policies for all temporary and service account
credentials belonging to LDAP users.
Add a new goroutine file which has another printing format. We need it
to see how much time each goroutine was blocked. Easier to detect stops.
Co-authored-by: Anis Elleuch <anis@min.io>
when TLS is configured using IPs directly
might interfere and not work properly when
the server is configured with TLS certs but
the certs only have domain certs.
Also additionally allow users to specify
a public accessible URL for console to talk
to MinIO i.e `MINIO_SERVER_URL` this would
allow them to use an external ingress domain
to talk to MinIO. This internally fixes few
problems such as presigned URL generation on
the console UI etc.
This needs to be done additionally for any
MinIO deployments that might have a much more
stricter requirement when running in standalone
mode such as FS or standalone erasure code.
This method is used to add expected expiration and transition time
for an object in GET/HEAD Object response headers.
Also fixed bugs in lifecycle.PredictTransitionTime and
getLifecycleTransitionTier in handling current and
non-current versions.
This allows remote bucket admin to identify the origin of transitioned
objects by simply inspecting the object prefixes.
e.g let's take a remote tier TIER-1 pointing to a remote bucket (prefix)
testbucket/testprefix-1. The remote bucket admin can list all transitioned objects
from a MinIO deployment identified by '2e78e906-1c5d-4f94-8689-9df44cafde39' and
source bucket 'mybucket' like so,
```
$ ./mc ls -r minio-tier-target/testbucket/testprefix-1/2e78e906-1c5d-4f94-8689-9df44cafde39/mybucket/
[2021-07-12 17:15:50 PDT] 160B 48/fb/48fbc0e6-3a73-458b-9337-8e722c619ca4
[2021-07-12 16:58:46 PDT] 160B 7d/1c/7d1c96bd-031a-48d4-99ea-b1304e870830
```
In case of non-distributed setup, if the server start command contains a
`--console-address` flag and its value contains a hostname, it is not
getting anonymized.
Fixed by replacing the console host also with `server1`
This commit gathers MRF metrics from
all nodes in a cluster and return it to the caller. This will show information about the
number of objects in the MRF queues
waiting to be healed.
In case of replication healing, we always store completed status in the
object metadata, which is wrong because replication could fail in the
further retries.
Ensure that hostnames / ip addresses are not printed in the subnet
health report. Anonymize them by replacing them with `servern` where `n`
represents the position of the server in the pool.
This is done by building a `host anonymizer` map that maps every
possible value containing the host e.g. host, host:port,
http://host:port, etc to the corresponding anonymized name and using
this map to replace the values at the time of health report generation.
A different logic is used to anonymize host names in the `procinfo`
data, as the host names are part of an ellipses pattern in the process
start command. Here we just replace the prefix/suffix of the ellipses
pattern with their hashes.
Gzip responses if appropriate, except GetObject requests.
List reponses has an almost 10:1 compression ratio with no
measurable slowdown (in fact it seems a bit faster).
- ParentUser for OIDC auth changed to `openid:`
instead of `jwt:` to avoid clashes with variable
substitution
- Do not pass in random parents into IsAllowed()
policy evaluation as it can change the behavior
of looking for correct policies underneath.
fixes#12676fixes#12680
with console addition users cannot login with
root credentials without etcd persistent layer,
allow a dummy store such that such functionalities
can be supported when running as non-persistent
manner, this enables all calls and operations.
MinIO might be running inside proxies, and
console while being on another port might not be
reachable on a specific port behind such proxies.
For such scenarios customize the redirect URL
such that console can be redirected to correct
proxy endpoint instead.
fixes#12661
Download files from *any* bucket/path as an encrypted zip file.
The key is included in the response but can be separated so zip
and the key doesn't have to be sent on the same channel.
Requires https://github.com/minio/pkg/pull/6
Additional support for vendor-specific admin API
integrations for OpenID, to ensure validity of
credentials on MinIO.
Every 5minutes check for validity of credentials
on MinIO with vendor specific IDP.
DiskInfo() calls can stagger and wait if run
serially timing out 10secs per drive, to avoid
this lets check DiskInfo in parallel to avoid
delays when nodes get disconnected.
Klaus Post
Aditya Manthramurthy
Anis Elleuch
Harshavardhana
Krishnan Parthasarathi
Shireesh Anjal
Poorna K
Daniel A. Ochoa
jiangfucheng
Andreas Auernhammer
Krishna Srinivas
Sidhartha Mani
Ashish Kumar Sinha
Dominik Hassler
MoonJustry
AlexHuang2021
sakkiii
Lazzaretti
ebozduman