https://github.com/minio/console takes over the functionality for the
future object browser development
Signed-off-by: Harshavardhana <harsha@minio.io>
* Provide information on *actively* healing, buckets healed/queued, objects healed/failed.
* Add concurrent healing of multiple sets (typically on startup).
* Add bucket level resume, so restarts will only heal non-healed buckets.
* Print summary after healing a disk is done.
additionally also configure http2 healthcheck
values to quickly detect unstable connections
and let them timeout.
also use single transport for proxying requests
In almost all scenarios MinIO now is
mostly ready for all sub-systems
independently, safe-mode is not useful
anymore and do not serve its original
intended purpose.
allow server to be fully functional
even with config partially configured,
this is to cater for availability of actual
I/O v/s manually fixing the server.
In k8s like environments it will never make
sense to take pod into safe-mode state,
because there is no real access to perform
any remote operation on them.
if needed use --no-compat to disable md5sum while
verifying any performance numbers.
bring back --compat behavior as default to avoid
additional documentation and confusing behavior,
as we are working towards improving md5sum to
be faster on AVX instructions, enabling this
should be hardly a problem in future versions
of MinIO.
fixes#8012fixes#7859fixes#7642
Metrics used to have its own code to calculate offline disks.
StorageInfo() was avoided because it is an expensive operation
by sending calls to all nodes.
To make metrics & server info share the same code, a new
argument `local` is added to StorageInfo() so it will only
query local disks when needed.
Metrics now calls StorageInfo() as server info handler does
but with the local flag set to false.
Co-authored-by: Praveen raj Mani <praveen@minio.io>
Co-authored-by: Harshavardhana <harsha@minio.io>
Fixes an issue reported by @klauspost and @vadmeste
This PR also allows users to expand their clusters
from single node XL deployment to distributed mode.
- Migrate and save only settings which are enabled
- Rename logger_http to logger_webhook and
logger_http_audit to audit_webhook
- No more pretty printing comments, comment
is a key=value pair now.
- Avoid quotes on values which do not have space in them
- `state="on"` is implicit for all SetConfigKV unless
specified explicitly as `state="off"`
- Disabled IAM users should be disabled always
This PR refactors object layer handling such
that upon failure in sub-system initialization
server reaches a stage of safe-mode operation
wherein only certain API operations are enabled
and available.
This allows for fixing many scenarios such as
- incorrect configuration in vault, etcd,
notification targets
- missing files, incomplete config migrations
unable to read encrypted content etc
- any other issues related to notification,
policies, lifecycle etc
- This PR allows config KVS to be validated properly
without being affected by ENV overrides, rejects
invalid values during set operation
- Expands unit tests and refactors the error handling
for notification targets, returns error instead of
ignoring targets for invalid KVS
- Does all the prep-work for implementing safe-mode
style operation for MinIO server, introduces a new
global variable to toggle safe mode based operations
NOTE: this PR itself doesn't provide safe mode operations
- adding oauth support to MinIO browser (#8400) by @kanagaraj
- supports multi-line get/set/del for all config fields
- add support for comments, allow toggle
- add extensive validation of config before saving
- support MinIO browser to support proper claims, using STS tokens
- env support for all config parameters, legacy envs are also
supported with all documentation now pointing to latest ENVs
- preserve accessKey/secretKey from FS mode setups
- add history support implements three APIs
- ClearHistory
- RestoreHistory
- ListHistory
- add help command support for each config parameters
- all the bug fixes after migration to KV, and other bug
fixes encountered during testing.
The measures are consolidated to the following metrics
- `disk_storage_used` : Disk space used by the disk.
- `disk_storage_available`: Available disk space left on the disk.
- `disk_storage_total`: Total disk space on the disk.
- `disks_offline`: Total number of offline disks in current MinIO instance.
- `disks_total`: Total number of disks in current MinIO instance.
- `s3_requests_total`: Total number of s3 requests in current MinIO instance.
- `s3_errors_total`: Total number of errors in s3 requests in current MinIO instance.
- `s3_requests_current`: Total number of active s3 requests in current MinIO instance.
- `internode_rx_bytes_total`: Total number of internode bytes received by current MinIO server instance.
- `internode_tx_bytes_total`: Total number of bytes sent to the other nodes by current MinIO server instance.
- `s3_rx_bytes_total`: Total number of s3 bytes received by current MinIO server instance.
- `s3_tx_bytes_total`: Total number of s3 bytes sent by current MinIO server instance.
- `minio_version_info`: Current MinIO version with commit-id.
- `s3_ttfb_seconds_bucket`: Histogram that holds the latency information of the requests.
And this PR also modifies the current StorageInfo queries
- Decouples StorageInfo from ServerInfo .
- StorageInfo is enhanced to give endpoint information.
NOTE: ADMIN API VERSION IS BUMPED UP IN THIS PR
Fixes#7873
This change is related to larger config migration PR
change, this is a first stage change to move our
configs to `cmd/config/` - divided into its subsystems
By default when we listen on all interfaces, we print all the
endpoints that at local to all interfaces including IPv6
addresses. Remove IPv6 addresses in endpoint list to be
printed in endpoints unless explicitly specified with '--address'
This PR adds disk based edge caching support for minio server.
Cache settings can be configured in config.json to take list of disk drives,
cache expiry in days and file patterns to exclude from cache or via environment
variables MINIO_CACHE_DRIVES, MINIO_CACHE_EXCLUDE and MINIO_CACHE_EXPIRY
Design assumes that Atime support is enabled and the list of cache drives is
fixed.
- Objects are cached on both GET and PUT/POST operations.
- Expiry is used as hint to evict older entries from cache, or if 80% of cache
capacity is filled.
- When object storage backend is down, GET, LIST and HEAD operations fetch
object seamlessly from cache.
Current Limitations
- Bucket policies are not cached, so anonymous operations are not supported in
offline mode.
- Objects are distributed using deterministic hashing among list of cache
drives specified.If one or more drives go offline, or cache drive
configuration is altered - performance could degrade to linear lookup.
Fixes#4026
This PR implements an object layer which
combines input erasure sets of XL layers
into a unified namespace.
This object layer extends the existing
erasure coded implementation, it is assumed
in this design that providing > 16 disks is
a static configuration as well i.e if you started
the setup with 32 disks with 4 sets 8 disks per
pack then you would need to provide 4 sets always.
Some design details and restrictions:
- Objects are distributed using consistent ordering
to a unique erasure coded layer.
- Each pack has its own dsync so locks are synchronized
properly at pack (erasure layer).
- Each pack still has a maximum of 16 disks
requirement, you can start with multiple
such sets statically.
- Static sets set of disks and cannot be
changed, there is no elastic expansion allowed.
- Static sets set of disks and cannot be
changed, there is no elastic removal allowed.
- ListObjects() across sets can be noticeably
slower since List happens on all servers,
and is merged at this sets layer.
Fixes#5465Fixes#5464Fixes#5461Fixes#5460Fixes#5459Fixes#5458Fixes#5460Fixes#5488Fixes#5489Fixes#5497Fixes#5496
After the addition of Storage Class support, readQuorum
and writeQuorum are decided on a per object basis, instead
of deployment wide static quorums.
This PR updates madmin api to remove readQuorum/writeQuorum
and add Standard storage class and reduced redundancy storage
class parity as return values. Since these parity values are
used to decide the quorum for each object.
Fixes#5378
- Update startup banner to print storage class in capitals. This
makes it easier to identify different storage classes available.
- Update response metadata to not send STANDARD storage class.
This is in accordance with AWS S3 behaviour.
- Update minio-go library to bring in storage class related
changes. This is needed to make transparent translation of
storage class headers for Minio S3 Gateway.
Currently, browser access information is displayed without checking
if browser enabled flag is turned off in config.json. Fixing it to
hide the information if the flag is turned off.
Fixes#5312
This adds configurable data and parity options on a per object
basis. To use variable parity
- Users can set environment variables to cofigure variable
parity
- Then add header x-amz-storage-class to putobject requests
with relevant storage class values
Fixes#4997
