PUT shall only proceed if pre-conditions are met, the new
code uses
- x-minio-source-mtime
- x-minio-source-etag
to verify if the object indeed needs to be replicated
or not, allowing us to avoid StatObject() call.
Queue failed/pending replication for healing during listing and GET/HEAD
API calls. This includes healing of existing objects that were never
replicated or those in the middle of a resync operation.
This PR also fixes a bug in ListObjectVersions where lifecycle filtering
should be done.
This PR changes the handling of bucket deletes for site
replicated setups to hold on to deleted bucket state until
it syncs to all the clusters participating in site replication.
Do completely independent multipart uploads.
In distributed mode, a lock was held to merge each multipart
upload as it was added. This lock was highly contested and
retries are expensive (timewise) in distributed mode.
Instead, each part adds its metadata information uniquely.
This eliminates the per object lock required for each to merge.
The metadata is read back and merged by "CompleteMultipartUpload"
without locks when constructing final object.
Co-authored-by: Harshavardhana <harsha@minio.io>
This commit adds a `context.Context` to the
the KMS `{Stat, CreateKey, GenerateKey}` API
calls.
The context will be used to terminate external calls
as soon as the client requests gets canceled.
A follow-up PR will add a `context.Context` to
the remaining `DecryptKey` API call.
Signed-off-by: Andreas Auernhammer <hi@aead.dev>
Add up to 256 bytes of padding for compressed+encrypted files.
This will obscure the obvious cases of extremely compressible content
and leave a similar output size for a very wide variety of inputs.
This does *not* mean the compression ratio doesn't leak information
about the content, but the outcome space is much smaller,
so often *less* information is leaked.
Rename Trigger -> Event to be a more appropriate
name for the audit event.
Bonus: fixes a bug in AddMRFWorker() it did not
cancel the waitgroup, leading to waitgroup leaks.
There is no point in compressing very small files.
Typically the effective size on disk will be the same due to disk blocks.
So don't waste resources on extremely small files.
We don't check on multipart. 1) because we don't know and 2) this is very likely a big object anyway.
In a replicated setup, when an object is updated in one cluster but
still waiting to be replicated to the other cluster, GET requests with
if-match, and range headers will likely fail. It is better to proxy
requests instead.
Also, this commit avoids printing verbose logs about precondition &
range errors.
If sending a white space during a long S3 handler call fails,
the whitespace goroutine forgets to return a result to the caller.
Therefore, the complete multipart handler will be blocked.
Remember to send the header written result to the caller
or/and close the channel.
PR #15041 fixed replicating 'null' version however
due to a regression from #14994 caused the target
versions for these 'null' versioned objects to have
different 'versions', this may cause confusion with
bi-directional replication and cause double replication.
This PR fixes this properly by making sure we replicate
the correct versions on the objects.
updating metadata with CopyObject on a versioned bucket
causes the latest version to be not readable, this PR fixes
this properly by handling the inline data bug fix introduced
in PR #14780.
This bug affects only inlined data.
Spark/Hadoop workloads which use Hadoop MR
Committer v1/v2 algorithm upload objects to a
temporary prefix in a bucket. These objects are
'renamed' to a different prefix on Job commit.
Object storage admins are forced to configure
separate ILM policies to expire these objects
and their versions to reclaim space.
Our solution:
This can be avoided by simply marking objects
under these prefixes to be excluded from versioning,
as shown below. Consequently, these objects are
excluded from replication, and don't require ILM
policies to prune unnecessary versions.
- MinIO Extension to Bucket Version Configuration
```xml
<VersioningConfiguration xmlns="http://s3.amazonaws.com/doc/2006-03-01/">
<Status>Enabled</Status>
<ExcludeFolders>true</ExcludeFolders>
<ExcludedPrefixes>
<Prefix>app1-jobs/*/_temporary/</Prefix>
</ExcludedPrefixes>
<ExcludedPrefixes>
<Prefix>app2-jobs/*/__magic/</Prefix>
</ExcludedPrefixes>
<!-- .. up to 10 prefixes in all -->
</VersioningConfiguration>
```
Note: `ExcludeFolders` excludes all folders in a bucket
from versioning. This is required to prevent the parent
folders from accumulating delete markers, especially
those which are shared across spark workloads
spanning projects/teams.
- To enable version exclusion on a list of prefixes
```
mc version enable --excluded-prefixes "app1-jobs/*/_temporary/,app2-jobs/*/_magic," --exclude-prefix-marker myminio/test
```
This PR fixes two issues
- The first fix is a regression from #14555, the fix itself in #14555
is correct but the interpretation of that information by the
object layer code for "replication" was not correct. This PR
tries to fix this situation by making sure the "Delete" replication
works as expected when "VersionPurgeStatus" is already set.
Without this fix, there is a DELETE marker created incorrectly on
the source where the "DELETE" was triggered.
- The second fix is perhaps an older problem started since we inlined-data
on the disk for small objects, CopyObject() incorrectly inline's
a non-inlined data. This is due to the fact that we have code where
we read the `part.1` under certain conditions where the size of the
`part.1` is less than the specific "threshold".
This eventually causes problems when we are "deleting" the data that
is only inlined, which means dataDir is ignored leaving such
dataDir on the disk, that looks like an inconsistent content on
the namespace.
fixes#14767
- This change switches to a new parquet library
- SelectObjectContent now takes a single lock at the beginning and holds it
during the operation. Previously the operation took a lock every time the
parquet library performed a Seek on the underlying object stream.
- Add basic support for LogicalType annotations for timestamps.
This commit simplifies the ETag decryption and size adjustment
when listing object parts.
When listing object parts, MinIO has to decrypt the ETag of all
parts if and only if the object resp. the parts is encrypted using
SSE-S3.
In case of SSE-KMS and SSE-C, MinIO returns a pseudo-random ETag.
This is inline with AWS S3 behavior.
Further, MinIO has to adjust the size of all encrypted parts due to
the encryption overhead.
The ListObjectParts does specifically not use the KMS bulk decryption
API (4d2fc530d0) since the ETags of all
parts are encrypted using the same object encryption key. Therefore,
MinIO only has to connect to the KMS once, even if there are multiple
parts resp. ETags. It can simply reuse the same object encryption key.
Signed-off-by: Andreas Auernhammer <hi@aead.dev>
This commit fixes two bugs in the `PutObjectPartHandler`.
First, `PutObjectPart` should return SSE-KMS headers
when the object is encrypted using SSE-KMS.
Before, this was not the case.
Second, the ETag should always be a 16 byte hex string,
perhaps followed by a `-X` (where `X` is the number of parts).
However, `PutObjectPart` used to return the encrypted ETag
in case of SSE-KMS. This leaks MinIO internal etag details
through the S3 API.
The combination of both bugs causes clients that use SSE-KMS
to fail when trying to validate the ETag. Since `PutObjectPart`
did not send the SSE-KMS response headers, the response looked
like a plaintext `PutObjectPart` response. Hence, the client
tries to verify that the ETag is the content-md5 of the part.
This could never be the case, since MinIO used to return the
encrypted ETag.
Therefore, clients behaving as specified by the S3 protocol
tried to verify the ETag in a situation they should not.
Signed-off-by: Andreas Auernhammer <hi@aead.dev>
Enabled with `mc admin config set alias/ api gzip_objects=on`
Standard filtering applies (1K response minimum, not compressed content
type, not range request, gzip accepted by client).
Return errors when untar fails at once.
Current error handling was quite a mess. Errors are written
to the stream, but processing continues.
Instead, return errors when they occur and transform
internal errors to bad request errors, since it is likely a
problem with the input.
Fixes#13832
- New sub-system has "region" and "name" fields.
- `region` subsystem is marked as deprecated, however still works, unless the
new region parameter under `site` is set - in this case, the region subsystem is
ignored. `region` subsystem is hidden from top-level help (i.e. from `mc admin
config set myminio`), but appears when specifically requested (i.e. with `mc
admin config set myminio region`).
- MINIO_REGION, MINIO_REGION_NAME are supported as legacy environment variables for server region.
- Adds MINIO_SITE_REGION as the current environment variable to configure the
server region and MINIO_SITE_NAME for the site name.
- Go might reset the internal http.ResponseWriter() to `nil`
after Write() failure if the go-routine has returned, do not
flush() such scenarios and avoid spurious flushes() as
returning handlers always flush.
- fix some racy tests with the console
- avoid ticker leaks in certain situations
- remove some duplicated code
- reported a bug, separately fixed in #13664
- using strings.ReplaceAll() when needed
- using filepath.ToSlash() use when needed
- remove all non-Go style comments from the codebase
Co-authored-by: Aditya Manthramurthy <donatello@users.noreply.github.com>
Borrowed idea from Go's usage of this
optimization for ReadFrom() on client
side, we should re-use the 32k buffers
io.Copy() allocates for generic copy
from a reader to writer.
the performance increase for reads for
really tiny objects is at this range
after this change.
> * Fastest: +7.89% (+1.3 MiB/s) throughput, +7.89% (+1308.1) obj/s
Removes RLock/RUnlock for updating metadata,
since we already take a write lock to update
metadata, this change removes reading of xl.meta
as well as an additional lock, the performance gain
should increase 3x theoretically for
- PutObjectRetention
- PutObjectLegalHold
This optimization is mainly for Veeam like
workloads that require a certain level of iops
from these API calls, we were losing iops.
- Supports object locked buckets that require
PutObject() to set content-md5 always.
- Use SSE-S3 when S3 gateway is being used instead
of SSE-KMS for auto-encryption.
Replication was not working properly for encrypted
objects in single PUT object for preserving etag,
We need to make sure to preserve etag such that replication
works properly and not gets into infinite loops of copying
due to ETag mismatches.
* reduce extra getObjectInfo() calls during ILM transition
This PR also changes expiration logic to be non-blocking,
scanner is now free from additional costs incurred due
to slower object layer calls and hitting the drives.
* move verifying expiration inside locks
- deletes should always Sweep() for tiering at the
end and does not need an extra getObjectInfo() call
- puts, copy and multipart writes should conditionally
do getObjectInfo() when tiering targets are configured
- introduce 'TransitionedObject' struct for ease of usage
and understanding.
- multiple-pools optimization deletes don't need to hold
read locks verifying objects across namespace and pools.
This happens because of a change added where any sub-credential
with parentUser == rootCredential i.e (MINIO_ROOT_USER) will
always be an owner, you cannot generate credentials with lower
session policy to restrict their access.
This doesn't affect user service accounts created with regular
users, LDAP or OpenID
Before, the gateway will complain that it found KMS configured in the
environment but the gateway mode does not support encryption. This
commit will allow starting of the gateway but ensure that S3 operations
with encryption headers will fail when the gateway doesn't support
encryption. That way, the user can use etcd + KMS and have IAM data
encrypted in the etcd store.
Co-authored-by: Anis Elleuch <anis@min.io>
if object was uploaded with multipart. This is to ensure that
GetObject calls with partNumber in URI request parameters
have same behavior on source and replication target.
Bonus: remove kms_kes as sub-system, since its ENV only.
- also fixes a crash with etcd cluster without KMS
configured and also if KMS decryption is missing.
This feature also changes the default port where
the browser is running, now the port has moved
to 9001 and it can be configured with
```
--console-address ":9001"
```
Always use `GetActualSize` to get the part size, not just when encrypted.
Fixes mint test io.minio.MinioClient.uploadPartCopy,
error "Range specified is not valid for source object".
Also adding an API to allow resyncing replication when
existing object replication is enabled and the remote target
is entirely lost. With the `mc replicate reset` command, the
objects that are eligible for replication as per the replication
config will be resynced to target if existing object replication
is enabled on the rule.
This is to ensure that there are no projects
that try to import `minio/minio/pkg` into
their own repo. Any such common packages should
go to `https://github.com/minio/pkg`
This commit fixes a bug causing the MinIO server to compute
the ETag of a single-part object as MD5 of the compressed
content - not as MD5 of the actual content.
This usually does not affect clients since the MinIO appended
a `-1` to indicate that the ETag belongs to a multipart object.
However, this behavior was problematic since:
- A S3 client being very strict should reject such an ETag since
the client uploaded the object via single-part API but got
a multipart ETag that is not the content MD5.
- The MinIO server leaks (via the ETag) that it compressed the
object.
This commit addresses both cases. Now, the MinIO server returns
an ETag equal to the content MD5 for single-part objects that got
compressed.
Signed-off-by: Andreas Auernhammer <aead@mail.de>
This commit adds the `X-Amz-Server-Side-Encryption-Aws-Kms-Key-Id`
response header to the GET, HEAD, PUT and Download API.
Based on AWS documentation [1] AWS S3 returns the KMS key ID as part
of the response headers.
[1] https://docs.aws.amazon.com/AmazonS3/latest/userguide/specifying-kms-encryption.html
Signed-off-by: Andreas Auernhammer <aead@mail.de>
This commit adds support for SSE-KMS bucket configurations.
Before, the MinIO server did not support SSE-KMS, and therefore,
it was not possible to specify an SSE-KMS bucket config.
Now, this is possible. For example:
```
mc encrypt set sse-kms some-key <alias>/my-bucket
```
Further, this commit fixes an issue caused by not supporting
SSE-KMS bucket configuration and switching to SSE-KMS as default
SSE method.
Before, the server just checked whether an SSE bucket config was
present (not which type of SSE config) and applied the default
SSE method (which was switched from SSE-S3 to SSE-KMS).
This caused objects to get encrypted with SSE-KMS even though a
SSE-S3 bucket config was present.
This issue is fixed as a side-effect of this commit.
Signed-off-by: Andreas Auernhammer <aead@mail.de>
when bidirectional replication is set up.
If ReplicaModifications is enabled in the replication
configuration, sync metadata updates to source if
replication rules are met. By default, if this
configuration is unset, MinIO automatically sync's
metadata updates on replica back to the source.
This commit replaces the custom KES client implementation
with the KES SDK from https://github.com/minio/kes
The SDK supports multi-server client load-balancing and
requests retry out of the box. Therefore, this change reduces
the overall complexity within the MinIO server and there
is no need to maintain two separate client implementations.
Signed-off-by: Andreas Auernhammer <aead@mail.de>
This commit adds basic SSE-KMS support.
Now, a client can specify the SSE-KMS headers
(algorithm, optional key-id, optional context)
such that the object gets encrypted using the
SSE-KMS method. Further, auto-encryption now
defaults to SSE-KMS.
This commit does not try to do any refactoring
and instead tries to implement SSE-KMS as a minimal
change to the code base. However, refactoring the entire
crypto-related code is planned - but needs a separate
effort.
Signed-off-by: Andreas Auernhammer <aead@mail.de>
This commit adds basic SSE-KMS support.
Now, a client can specify the SSE-KMS headers
(algorithm, optional key-id, optional context)
such that the object gets encrypted using the
SSE-KMS method. Further, auto-encryption now
defaults to SSE-KMS.
This commit does not try to do any refactoring
and instead tries to implement SSE-KMS as a minimal
change to the code base. However, refactoring the entire
crypto-related code is planned - but needs a separate
effort.
Signed-off-by: Andreas Auernhammer <aead@mail.de>
Co-authored-by: Klaus Post <klauspost@gmail.com>
https://github.com/minio/console takes over the functionality for the
future object browser development
Signed-off-by: Harshavardhana <harsha@minio.io>
With this change, MinIO's ILM supports transitioning objects to a remote tier.
This change includes support for Azure Blob Storage, AWS S3 compatible object
storage incl. MinIO and Google Cloud Storage as remote tier storage backends.
Some new additions include:
- Admin APIs remote tier configuration management
- Simple journal to track remote objects to be 'collected'
This is used by object API handlers which 'mutate' object versions by
overwriting/replacing content (Put/CopyObject) or removing the version
itself (e.g DeleteObjectVersion).
- Rework of previous ILM transition to fit the new model
In the new model, a storage class (a.k.a remote tier) is defined by the
'remote' object storage type (one of s3, azure, GCS), bucket name and a
prefix.
* Fixed bugs, review comments, and more unit-tests
- Leverage inline small object feature
- Migrate legacy objects to the latest object format before transitioning
- Fix restore to particular version if specified
- Extend SharedDataDirCount to handle transitioned and restored objects
- Restore-object should accept version-id for version-suspended bucket (#12091)
- Check if remote tier creds have sufficient permissions
- Bonus minor fixes to existing error messages
Co-authored-by: Poorna Krishnamoorthy <poorna@minio.io>
Co-authored-by: Krishna Srinivas <krishna@minio.io>
Signed-off-by: Harshavardhana <harsha@minio.io>
This commit introduces a new package `pkg/fips`
that bundles functionality to handle and configure
cryptographic protocols in case of FIPS 140.
If it is compiled with `--tags=fips` it assumes
that a FIPS 140-2 cryptographic module is used
to implement all FIPS compliant cryptographic
primitives - like AES, SHA-256, ...
In "FIPS mode" it excludes all non-FIPS compliant
cryptographic primitives from the protocol parameters.
only in case of S3 gateway we have a case where we
need to allow for SSE-S3 headers as passthrough,
If SSE-C headers are passed then they are rejected
if KMS is not configured.
This commit fixes a bug in the put-part
implementation. The SSE headers should be
set as specified by AWS - See:
https://docs.aws.amazon.com/AmazonS3/latest/API/API_UploadPart.html
Now, the MinIO server should set SSE-C headers,
like `x-amz-server-side-encryption-customer-algorithm`.
Fixes#11991
Current implementation heavily relies on readAllFileInfo
but with the advent of xl.meta inlined with data, we cannot
easily avoid reading data when we are only interested is
updating metadata, this leads to invariably write
amplification during metadata updates, repeatedly reading
data when we are only interested in updating metadata.
This PR ensures that we implement a metadata only update
API at storage layer, that handles updates to metadata alone
for any given version - given the version is valid and
present.
This helps reduce the chattiness for following calls..
- PutObjectTags
- DeleteObjectTags
- PutObjectLegalHold
- PutObjectRetention
- ReplicateObject (updates metadata on replication status)
- collect real time replication metrics for prometheus.
- add pending_count, failed_count metric for total pending/failed replication operations.
- add API to get replication metrics
- add MRF worker to handle spill-over replication operations
- multiple issues found with replication
- fixes an issue when client sends a bucket
name with `/` at the end from SetRemoteTarget
API call make sure to trim the bucket name to
avoid any extra `/`.
- hold write locks in GetObjectNInfo during replication
to ensure that object version stack is not overwritten
while reading the content.
- add additional protection during WriteMetadata() to
ensure that we always write a valid FileInfo{} and avoid
ever writing empty FileInfo{} to the lowest layers.
Co-authored-by: Poorna Krishnamoorthy <poorna@minio.io>
Co-authored-by: Harshavardhana <harsha@minio.io>
replication didn't work as expected when deletion of
delete markers was requested in DeleteMultipleObjects
API, this is due to incorrect lookup elements being
used to look for delete markers.
Harshavardhana
Klaus Post
Poorna
Andreas Auernhammer
Minio Trusted
Anis Elleuch
Krishnan Parthasarathi
Aditya Manthramurthy
Andreas Auernhammer
ebozduman
sgandon