Depending on when the context cancelation is picked up the handler may return and close the channel before `SubscribeJSON` returns, causing:
```
Feb 05 17:12:00 s3-us-node11 minio[3973657]: panic: send on closed channel
Feb 05 17:12:00 s3-us-node11 minio[3973657]: goroutine 378007076 [running]:
Feb 05 17:12:00 s3-us-node11 minio[3973657]: github.com/minio/minio/internal/pubsub.(*PubSub[...]).SubscribeJSON.func1()
Feb 05 17:12:00 s3-us-node11 minio[3973657]: github.com/minio/minio/internal/pubsub/pubsub.go:139 +0x12d
Feb 05 17:12:00 s3-us-node11 minio[3973657]: created by github.com/minio/minio/internal/pubsub.(*PubSub[...]).SubscribeJSON in goroutine 378010884
Feb 05 17:12:00 s3-us-node11 minio[3973657]: github.com/minio/minio/internal/pubsub/pubsub.go:124 +0x352
```
Wait explicitly for the goroutine to exit.
Bonus: Listen for doneCh when sending to not risk getting blocked there is channel isn't being emptied.
disk tokens usage is not necessary anymore with the implementation
of deadlines for storage calls and active monitoring of the drive
for I/O timeouts.
Functionality kicking off a bad drive is still supported, it's just that
we do not have to serialize I/O in the manner tokens would do.
Recycle would always be called on the dummy value `any(newRT())` instead of the actual value given to the recycle function.
Caught by race tests, but mostly harmless, except for reduced perf.
Other minor cleanups. Introduced in #18940 (unreleased)
Allow internal types to support a `Recycler` interface, which will allow for sharing of common types across handlers.
This means that all `grid.MSS` (and similar) objects are shared across in a common pool instead of a per-handler pool.
Add internal request reuse of internal types. Add for safe (pointerless) types explicitly.
Only log params for internal types. Doing Sprint(obj) is just a bit too messy.
Do not rely on `connChange` to do reconnects.
Instead, you can block while the connection is running and reconnect
when handleMessages returns.
Add fully async monitoring instead of monitoring on the main goroutine
and keep this to avoid full network lockup.
- Move RenameFile to websockets
- Move ReadAll that is primarily is used
for reading 'format.json' to to websockets
- Optimize DiskInfo calls, and provide a way
to make a NoOp DiskInfo call.
Add separate reconnection mutex
Give more safety around reconnects and make sure a state change isn't missed.
Tested with several runs of `λ go test -race -v -count=500`
Adds separate mutex and doesn't mix in the testing mutex.
AlmosAll uses of NewDeadlineWorker, which relied on secondary values, were used in a racy fashion,
which could lead to inconsistent errors/data being returned. It also propagates the deadline downstream.
Rewrite all these to use a generic WithDeadline caller that can return an error alongside a value.
Remove the stateful aspect of DeadlineWorker - it was racy if used - but it wasn't AFAICT.
Fixes races like:
```
WARNING: DATA RACE
Read at 0x00c130b29d10 by goroutine 470237:
github.com/minio/minio/cmd.(*xlStorageDiskIDCheck).ReadVersion()
github.com/minio/minio/cmd/xl-storage-disk-id-check.go:702 +0x611
github.com/minio/minio/cmd.readFileInfo()
github.com/minio/minio/cmd/erasure-metadata-utils.go:160 +0x122
github.com/minio/minio/cmd.erasureObjects.getObjectFileInfo.func1.1()
github.com/minio/minio/cmd/erasure-object.go:809 +0x27a
github.com/minio/minio/cmd.erasureObjects.getObjectFileInfo.func1.2()
github.com/minio/minio/cmd/erasure-object.go:828 +0x61
Previous write at 0x00c130b29d10 by goroutine 470298:
github.com/minio/minio/cmd.(*xlStorageDiskIDCheck).ReadVersion.func1()
github.com/minio/minio/cmd/xl-storage-disk-id-check.go:698 +0x244
github.com/minio/minio/internal/ioutil.(*DeadlineWorker).Run.func1()
github.com/minio/minio/internal/ioutil/ioutil.go:141 +0x33
WARNING: DATA RACE
Write at 0x00c0ba6e6c00 by goroutine 94507:
github.com/minio/minio/cmd.(*xlStorageDiskIDCheck).StatVol.func1()
github.com/minio/minio/cmd/xl-storage-disk-id-check.go:419 +0x104
github.com/minio/minio/internal/ioutil.(*DeadlineWorker).Run.func1()
github.com/minio/minio/internal/ioutil/ioutil.go:141 +0x33
Previous read at 0x00c0ba6e6c00 by goroutine 94463:
github.com/minio/minio/cmd.(*xlStorageDiskIDCheck).StatVol()
github.com/minio/minio/cmd/xl-storage-disk-id-check.go:422 +0x47e
github.com/minio/minio/cmd.getBucketInfoLocal.func1()
github.com/minio/minio/cmd/peer-s3-server.go:275 +0x122
github.com/minio/pkg/v2/sync/errgroup.(*Group).Go.func1()
```
Probably back from #17701
Race checks would occasionally show race on handleMsgWg WaitGroup by debug messages (used in test only).
Use the `connMu` mutex to protect this against concurrent Wait/Add.
Fixes#18827
When rejecting incoming grid requests fill out the rejection reason and log it once.
This will give more context when startup is failing. Already logged after a retry on caller.
support proxying of tagging requests in active-active replication
Note: even if proxying is successful, PutObjectTagging/DeleteObjectTagging
will continue to report a 404 since the object is not present locally.
Add a hidden configuration under the scanner sub section to configure if
the scanner should sleep between two objects scan. The configuration has
only effect when there is no drive activity related to s3 requests or
healing.
By default, the code will keep the current behavior which is doing
sleep between objects.
To forcefully enable the full scan speed in idle mode, you can do this:
`mc admin config set myminio scanner idle_speed=full`
NOTE: This feature is not retro-active; it will not cater to previous transactions
on existing setups.
To enable this feature, please set ` _MINIO_DRIVE_QUORUM=on` environment
variable as part of systemd service or k8s configmap.
Once this has been enabled, you need to also set `list_quorum`.
```
~ mc admin config set alias/ api list_quorum=auto`
```
A new debugging tool is available to check for any missing counters.
Following policies if present
```
"Condition": {
"IpAddress": {
"aws:SourceIp": [
"54.240.143.0/24",
"2001:DB8:1234:5678::/64"
]
}
}
```
And client is making a request to MinIO via IPv6 can
potentially crash the server.
Workarounds are turn-off IPv6 and use only IPv4
This PR also increases per node bpool memory from 1024 entries
to 2048 entries; along with that, it also moves the byte pool
centrally instead of being per pool.
`(*xlStorageDiskIDCheck).CreateFile` wraps the incoming reader in `xioutil.NewDeadlineReader`.
The wrapped reader is handed to `(*xlStorage).CreateFile`. This performs a Read call via `writeAllDirect`,
which reads into an `ODirectPool` buffer.
`(*DeadlineReader).Read` spawns an async read into the buffer. If a timeout is hit while reading,
the read operation returns to `writeAllDirect`. The operation returns an error and the buffer is reused.
However, if the async `Read` call unblocks, it will write to the now recycled buffer.
Fix: Remove the `DeadlineReader` - it is inherently unsafe. Instead, rely on the network timeouts.
This is not a disk timeout, anyway.
Regression in https://github.com/minio/minio/pull/17745
This patch adds the targetID to the existing notification target metrics
and deprecates the current target metrics which points to the overall
event notification subsystem
Klaus Post
Harshavardhana
Anis Eleuch
Frank Wessels
Praveen raj Mani
Poorna
jiuker
Sveinn
Pedro Juarez
Aditya Manthramurthy