enable linter using golangci-lint across
codebase to run a bunch of linters together,
we shall enable new linters as we fix more
things the codebase.
This PR fixes the first stage of this
cleanup.
The `ioutil.NopCloser(reader)` was hiding nested hash readers.
We make it an `io.Closer` so it can be attached without wrapping
and allows for nesting, by merging the requests.
This PR is to ensure that we call the relevant object
layer APIs for necessary S3 API level functionalities
allowing gateway implementations to return proper
errors as NotImplemented{}
This allows for all our tests in mint to behave
appropriately and can be handled appropriately as
well.
We should allow quorum errors to be send upwards
such that caller can retry while reading bucket
encryption/policy configs when server is starting
up, this allows distributed setups to load the
configuration properly.
Current code didn't facilitate this and would have
never loaded the actual configs during rolling,
server restarts.
This PR allows setting a "hard" or "fifo" quota
restriction at the bucket level. Buckets that
have reached the FIFO quota configured, will
automatically be cleaned up in FIFO manner until
bucket usage drops to configured quota.
If a bucket is configured with a "hard" quota
ceiling, all further writes are disallowed.
it is possible in many screnarios that even
if the divisible value is optimal, we may
end up with uneven distribution due to number
of nodes present in the configuration.
added code allow for affinity towards various
ellipses to figure out optimal value across
ellipses such that we can always reach a
symmetric value automatically.
Fixes#9416
Instead of GlobalContext use a local context for tests.
Most notably this allows stuff created to be shut down
when tests using it is done. After PR #9345 9331 CI is
often running out of memory/time.
- total number of S3 API calls per server
- maximum wait duration for any S3 API call
This implementation is primarily meant for situations
where HDDs are not capable enough to handle the incoming
workload and there is no way to throttle the client.
This feature allows MinIO server to throttle itself
such that we do not overwhelm the HDDs.
- pkg/bucket/encryption provides support for handling bucket
encryption configuration
- changes under cmd/ provide support for AES256 algorithm only
Co-Authored-By: Poorna <poornas@users.noreply.github.com>
Co-authored-by: Harshavardhana <harsha@minio.io>
Fixes scenario where zones are appropriately
handled, along with supporting overriding set
count. The new fix also ensures that we handle
the various setup types properly.
Update documentation to properly indicate the
behavior.
Fixes#8750
Co-authored-by: Nitish Tiwari <nitish@minio.io>
This PR implements locking from a global entity into
a more localized set level entity, allowing for locks
to be held only on the resources which are writing
to a collection of disks rather than a global level.
In this process this PR also removes the top-level
limit of 32 nodes to an unlimited number of nodes. This
is a precursor change before bring in bucket expansion.
This PR refactors object layer handling such
that upon failure in sub-system initialization
server reaches a stage of safe-mode operation
wherein only certain API operations are enabled
and available.
This allows for fixing many scenarios such as
- incorrect configuration in vault, etcd,
notification targets
- missing files, incomplete config migrations
unable to read encrypted content etc
- any other issues related to notification,
policies, lifecycle etc
- Supports migrating only when the credential ENVs are set,
so any FS mode deployments which do not have ENVs set will
continue to remain as is.
- Credential ENVs can be rotated using MINIO_ACCESS_KEY_OLD
and MINIO_SECRET_KEY_OLD envs, in such scenarios it allowed
to rotate the encrypted content to a new admin key.
- This PR allows config KVS to be validated properly
without being affected by ENV overrides, rejects
invalid values during set operation
- Expands unit tests and refactors the error handling
for notification targets, returns error instead of
ignoring targets for invalid KVS
- Does all the prep-work for implementing safe-mode
style operation for MinIO server, introduces a new
global variable to toggle safe mode based operations
NOTE: this PR itself doesn't provide safe mode operations
- adding oauth support to MinIO browser (#8400) by @kanagaraj
- supports multi-line get/set/del for all config fields
- add support for comments, allow toggle
- add extensive validation of config before saving
- support MinIO browser to support proper claims, using STS tokens
- env support for all config parameters, legacy envs are also
supported with all documentation now pointing to latest ENVs
- preserve accessKey/secretKey from FS mode setups
- add history support implements three APIs
- ClearHistory
- RestoreHistory
- ListHistory
- add help command support for each config parameters
- all the bug fixes after migration to KV, and other bug
fixes encountered during testing.
Current master repeatedly calls ListBuckets() during
initialization of multiple sub-systems
Use single ListBuckets() call for each sub-system as
follows
- LifeCycle
- Policy
- Notification
Add LDAP based users-groups system
This change adds support to integrate an LDAP server for user
authentication. This works via a custom STS API for LDAP. Each user
accessing the MinIO who can be authenticated via LDAP receives
temporary credentials to access the MinIO server.
LDAP is enabled only over TLS.
User groups are also supported via LDAP. The administrator may
configure an LDAP search query to find the group attribute of a user -
this may correspond to any attribute in the LDAP tree (that the user
has access to view). One or more groups may be returned by such a
query.
A group is mapped to an IAM policy in the usual way, and the server
enforces a policy corresponding to all the groups and the user's own
mapped policy.
When LDAP is configured, the internal MinIO users system is disabled.
When a peer client which higher version sends a request to a peer
server with lower version, the returned status code is 200 OK instead
of 405 code. The reason is that the peer client request reaches the
browser handler, which registers itself by '/minio' route but without
any other constraints. Adding filtering by user agent header to the
browser route so internal requests to old endpoints versions return
405 error code.
This PR is based off @sinhaashish's PR for object lifecycle
management, which includes support only for,
- Expiration of object
- Filter using object prefix (_not_ object tags)
N B the code for actual expiration of objects will be included in a
subsequent PR.
This commit relaxes the restriction that the MinIO gateway
does not accept SSE-KMS headers. Now, the S3 gateway allows
SSE-KMS headers for PUT and MULTIPART PUT requests and forwards them
to the S3 gateway backend (AWS). This is considered SSE pass-through
mode.
Fixes#7753
- Background Heal routine receives heal requests from a channel, either to
heal format, buckets or objects
- Daily sweeper lists all objects in all buckets, these objects
don't necessarly have read quorum so they can be removed if
these objects are unhealable
- Heal daily ops receives objects from the daily sweeper
and send them to the heal routine.
IsTruncated should not be set to true if there is no further
possible entries beyond maxKeys.
This commit will also move wide testing on object API from xl
to xl sets.
Bulk delete at storage level in Multiple Delete Objects API
In order to accelerate bulk delete in Multiple Delete objects API,
a new bulk delete is introduced in storage layer, which will accept
a list of objects to delete rather than only one. Consequently,
a new API is also need to be added to Object API.
- [x] Support bucket and regular object operations
- [x] Supports Select API on HDFS
- [x] Implement multipart API support
- [x] Completion of ListObjects support
Most hadoop distributions hortonworks, cloudera all
depend on aws-sdk-java 1.7.x to 1.10.x - the releases
which have bugs related case sensitive check for
ETag header. Go changes the case of the headers set
to be canonical but only preserves them when set
through a direct map.
This fixes most compatibility issues we have had
in the past supporting older hadoop distributions.
This change allows indefinitely running go-routines to cleanup
gracefully.
This channel is now closed at the beginning of each test so that
long-running go-routines quit and a new one is assigned.
Different gateway implementations due to different backend
API errors, might return different unsupported errors at
our handler layer. Current code posed a problem for us because
this information was lost and we would convert it to InternalError
in this situation all S3 clients end up retrying the request.
To avoid this unexpected situation implement a way to support
this cleanly such that the underlying information is not lost
which is returned by gateway.
This PR adds pass-through, single encryption at gateway and double
encryption support (gateway encryption with pass through of SSE
headers to backend).
If KMS is set up (either with Vault as KMS or using
MINIO_SSE_MASTER_KEY),gateway will automatically perform
single encryption. If MINIO_GATEWAY_SSE is set up in addition to
Vault KMS, double encryption is performed.When neither KMS nor
MINIO_GATEWAY_SSE is set, do a pass through to backend.
When double encryption is specified, MINIO_GATEWAY_SSE can be set to
"C" for SSE-C encryption at gateway and backend, "S3" for SSE-S3
encryption at gateway/backend or both to support more than one option.
Fixes#6323, #6696
To conform with AWS S3 Spec on ETag for SSE-S3 encrypted objects,
encrypt client sent MD5Sum and store it on backend as ETag.Extend
this behavior to SSE-C encrypted objects.
In many situations, while testing we encounter
ErrInternalError, to reduce logging we have
removed logging from quite a few places which
is acceptable but when ErrInternalError occurs
we should have a facility to log the corresponding
error, this helps to debug Minio server.
This PR introduces two new features
- AWS STS compatible STS API named AssumeRoleWithClientGrants
```
POST /?Action=AssumeRoleWithClientGrants&Token=<jwt>
```
This API endpoint returns temporary access credentials, access
tokens signature types supported by this API
- RSA keys
- ECDSA keys
Fetches the required public key from the JWKS endpoints, provides
them as rsa or ecdsa public keys.
- External policy engine support, in this case OPA policy engine
- Credentials are stored on disks
The new call combines GetObjectInfo and GetObject, and returns an
object with a ReadCloser interface.
Also adds a number of end-to-end encryption tests at the handler
level.
This PR adds two new admin APIs in Minio server and madmin package:
- GetConfigKeys(keys []string) ([]byte, error)
- SetConfigKeys(params map[string]string) (err error)
A key is a path in Minio configuration file, (e.g. notify.webhook.1)
The user will always send a string value when setting it in the config file,
the API will know how to convert the value to the appropriate type. The user
is also able to set a raw json.
Before setting a new config, Minio will validate all fields and try to connect
to notification targets if available.
One typo introduced in a recent commit miscalculates if worm and browser
are enabled or not. A simple test is also added to detect this issue
in the future if it ever happens again.
This PR is the first set of changes to move the config
to the backend, the changes use the existing `config.json`
allows it to be migrated such that we can save it in on
backend disks.
In future releases, we will slowly migrate out of the
current architecture.
Fixes#6182
Currently, requestid field in logEntry is not populated, as the
requestid field gets set at the very end.
It is now set before regular handler functions. This is also
useful in setting it as part of the XML error response.
Travis build for ppc64le has been quite inconsistent and stays queued
for most of the time. Removing this build as part of Travis.yml for
the time being.
Minio server was preventing itself to start when any notification
target is down and not running. The PR changes the behavior by
avoiding startup abort in that case, so the user will still
be able to access Minio server using mc admin commands after
a restart or set config commands.
Added support for new RPC support using HTTP POST. RPC's
arguments and reply are Gob encoded and sent as HTTP
request/response body.
This patch also removes Go RPC based implementation.
- remove old bucket policy handling
- add new policy handling
- add new policy handling unit tests
This patch brings support to bucket policy to have more control not
limiting to anonymous. Bucket owner controls to allow/deny any rest
API.
For example server side encryption can be controlled by allowing
PUT/GET objects with encryptions including bucket owner.
This PR adds disk based edge caching support for minio server.
Cache settings can be configured in config.json to take list of disk drives,
cache expiry in days and file patterns to exclude from cache or via environment
variables MINIO_CACHE_DRIVES, MINIO_CACHE_EXCLUDE and MINIO_CACHE_EXPIRY
Design assumes that Atime support is enabled and the list of cache drives is
fixed.
- Objects are cached on both GET and PUT/POST operations.
- Expiry is used as hint to evict older entries from cache, or if 80% of cache
capacity is filled.
- When object storage backend is down, GET, LIST and HEAD operations fetch
object seamlessly from cache.
Current Limitations
- Bucket policies are not cached, so anonymous operations are not supported in
offline mode.
- Objects are distributed using deterministic hashing among list of cache
drives specified.If one or more drives go offline, or cache drive
configuration is altered - performance could degrade to linear lookup.
Fixes#4026
With following changes
- Add SSE and refactor encryption API (#942) <Andreas Auernhammer>
- add copyObject test changing metadata and preserving etag (#944) <Harshavardhana>
- Add SSE-C tests for multipart, copy, get range operations (#941) <Harshavardhana>
- Removing conditional check for notificationInfoCh in api-notication (#940) <Matthew Magaldi>
- Honor prefix parameter in ListBucketPolicies API (#929) <kannappanr>
- test for empty objects uploaded with SSE-C headers (#927) <kannappanr>
- Encryption headers should also be set during initMultipart (#930) <Harshavardhana>
- Add support for Content-Language metadata header (#928) <kannappanr>
- Fix check for duplicate notification configuration entries (#917) <kannappanr>
- allow OS to cleanup sockets in TIME_WAIT (#925) <Harshavardhana>
- Sign V2: Fix signature calculation in virtual host style (#921) <A. Elleuch>
- bucket policy: Support json string in Principal field (#919) <A. Elleuch>
- Fix copyobject failure for empty files (#918) <kannappanr>
- Add new constructor NewWithOptions to SDK (#915) <poornas>
- Support redirect headers to sign again with new Host header. (#829) <Harshavardhana>
- Fail in PutObject if invalid user metadata is passed <Harshavadhana>
- PutObjectOptions Header: Don't include invalid header <Isaac Hess>
- increase max retry count to 10 (#913) <poornas>
- Add new regions for Paris and China west. (#905) <Harshavardhana>
- fix s3signer to use req.Host header (#899) <Bartłomiej Nogaś>
This PR implements an object layer which
combines input erasure sets of XL layers
into a unified namespace.
This object layer extends the existing
erasure coded implementation, it is assumed
in this design that providing > 16 disks is
a static configuration as well i.e if you started
the setup with 32 disks with 4 sets 8 disks per
pack then you would need to provide 4 sets always.
Some design details and restrictions:
- Objects are distributed using consistent ordering
to a unique erasure coded layer.
- Each pack has its own dsync so locks are synchronized
properly at pack (erasure layer).
- Each pack still has a maximum of 16 disks
requirement, you can start with multiple
such sets statically.
- Static sets set of disks and cannot be
changed, there is no elastic expansion allowed.
- Static sets set of disks and cannot be
changed, there is no elastic removal allowed.
- ListObjects() across sets can be noticeably
slower since List happens on all servers,
and is merged at this sets layer.
Fixes#5465Fixes#5464Fixes#5461Fixes#5460Fixes#5459Fixes#5458Fixes#5460Fixes#5488Fixes#5489Fixes#5497Fixes#5496
in-memory caching cannot be cleanly implemented
without the access to GC which Go doesn't naturally
provide. At times we have seen that object caching
is more of an hindrance rather than a boon for
our use cases.
Removing it completely from our implementation
related to #5160 and #5182
- Changes related to moving admin APIs
- admin APIs now have an endpoint under /minio/admin
- admin APIs are now versioned - a new API to server the version is
added at "GET /minio/admin/version" and all API operations have the
path prefix /minio/admin/v1/<operation>
- new service stop API added
- credentials change API is moved to /minio/admin/v1/config/credential
- credentials change API and configuration get/set API now require TLS
so that credentials are protected
- all API requests now receive JSON
- heal APIs are disabled as they will be changed substantially
- Heal API changes
Heal API is now provided at a single endpoint with the ability for a
client to start a heal sequence on all the data in the server, a
single bucket, or under a prefix within a bucket.
When a heal sequence is started, the server returns a unique token
that needs to be used for subsequent 'status' requests to fetch heal
results.
On each status request from the client, the server returns heal result
records that it has accumulated since the previous status request. The
server accumulates upto 1000 records and pauses healing further
objects until the client requests for status. If the client does not
request any further records for a long time, the server aborts the
heal sequence automatically.
A heal result record is returned for each entity healed on the server,
such as system metadata, object metadata, buckets and objects, and has
information about the before and after states on each disk.
A client may request to force restart a heal sequence - this causes
the running heal sequence to be aborted at the next safe spot and
starts a new heal sequence.
This fix removes logrus package dependency and refactors the console
logging as the only logging mechanism by removing file logging support.
It rearranges the log message format and adds stack trace information
whenever trace information is not available in the error structure.
It also adds `--json` flag support for server logging.
When minio server is started with `--json` flag, all log messages are
displayed in json format, with no start-up and informational log
messages.
Fixes#5265#5220#5197
This adds configurable data and parity options on a per object
basis. To use variable parity
- Users can set environment variables to cofigure variable
parity
- Then add header x-amz-storage-class to putobject requests
with relevant storage class values
Fixes#4997
This change introduces following simplified steps to follow
during config migration.
```
// Steps to move from version N to version N+1
// 1. Add new struct serverConfigVN+1 in config-versions.go
// 2. Set configCurrentVersion to "N+1"
// 3. Set serverConfigCurrent to serverConfigVN+1
// 4. Add new migration function (ex. func migrateVNToVN+1()) in config-migrate.go
// 5. Call migrateVNToVN+1() from migrateConfig() in config-migrate.go
// 6. Make changes in config-current_test.go for any test change
```
Verify() was being called by caller after the data
has been successfully read after io.EOF. This disconnection
opens a race under concurrent access to such an object.
Verification is not necessary outside of Read() call,
we can simply just do checksum verification right inside
Read() call at io.EOF.
This approach simplifies the usage.
This PR addresses a long standing dependency on
`gopkg.in/check.v1` project used for our tests.
All tests are re-written to use the go default
testing framework instead.
There was no reason for us to use an external
package where Go tools are sufficient for this.
This is done to avoid repeated declaration of not-implemented
functions for each gateway. It also avoids a possible bug in go
https://github.com/golang/go/issues/18468 which is triggered on
our multiple PRs already.
Previously we were wrongly adding `?` as part
of the resource name, add a test case to check
if this is handled properly.
Thanks to @kannappanr for reproducing this.
Without this change presigned URL generated with following
command would fail with signature mismatch.
```
aws s3 presign s3://testbucket/functional-tests.sh
```
Since go1.8 os.RemoveAll and os.MkdirAll both support long
path names i.e UNC path on windows. The code we are carrying
was directly borrowed from `pkg/os` package and doesn't need
to be in our repo anymore. As a side affect this also
addresses our codecoverage issue.
Refer #4658
This is to comply with S3 behavior, we previously removed
reading `fs.json` for optimization reasons but we have a
reason to believe that providing ETag and using gjson
provides needed benefit of not having to deal with
unmarshalling overhead of golang stdlib.
Fixes#4028
We can't use Content-Encoding to verify if `aws-chunked` is set
or not. Just use 'streaming' signature header instead.
While this is considered mandatory, on the contrary aws-sdk-java
doesn't set this value
http://docs.aws.amazon.com/AmazonS3/latest/API/sigv4-streaming.html
```
Set the value to aws-chunked.
```
We will relax it and behave appropriately. Also this PR supports
saving custom encoding after trimming off the `aws-chunked`
parameter.
Fixes#3983
This is to keep the portability and also avoid errors that
might occur using the functions written for URL resource name
Since query param values have different escaping requirements.
Also changes the behavior of `secretKeyHash` which is
not necessary to be sent over the network, each node
has its own secretKeyHash to validate.
Fixes#3696
Partial(fix) #3700 (More changes needed with some code cleanup)
* Implement heal format REST API handler
* Implement admin peer rpc handler to re-initialize storage
* Implement HealFormat API in pkg/madmin
* Update pkg/madmin API.md to incl. HealFormat
* Added unit tests for ReInitDisks rpc handler and HealFormatHandler
This is a consolidation effort, avoiding usage
of naked strings in codebase. Whenever possible
use constants which can be repurposed elsewhere.
This also fixes `goconst ./...` reported issues.
* Rename GenericArgs to AuthRPCArgs
* Rename GenericReply to AuthRPCReply
* Remove authConfig.loginMethod and add authConfig.ServiceName
* Rename loginServer to AuthRPCServer
* Rename RPCLoginArgs to LoginRPCArgs
* Rename RPCLoginReply to LoginRPCReply
* Version and RequestTime are added to LoginRPCArgs and verified by
server side, not client side.
* Fix data race in lockMaintainence loop.
This patch uses a technique where in a retryable storage
before object layer initialization has a higher delay
and waits for longer period upto 4 times with time unit
of seconds.
And uses another set of configuration after the disks
have been formatted, i.e use a lower retry backoff rate
and retrying only once per 5 millisecond.
Network IO error count is reduced to a lower value i.e 256
before we reject the disk completely. This is done so that
combination of retry logic and total error count roughly
come to around 2.5secs which is when we basically take the
disk offline completely.
NOTE: This patch doesn't fix the issue of what if the disk
is completely dead and comes back again after the initialization.
Such a mutating state requires a change in our startup sequence
which will be done subsequently. This is an interim fix to alleviate
users from these issues.
Attempt a reconnect also if disk not found.
This is needed since any network operation error
is converted to disk not found but we also need
to make sure if disk is really not available.
Additionally we also need to retry more than
once because the server might be in startup
sequence which would render other servers to
wrongly think that the server is offline.
This change brings in changes at multiple places
- Reuse buffers at almost all locations ranging
from rpc, fs, xl, checksum etc.
- Change caching behavior to disable itself
under low memory conditions i.e < 8GB of RAM.
- Only objects cached are of size 1/10th the size
of the cache for example if 4GB is the cache size
the maximum object size which will be cached
is going to be 400MB. This change is an
optimization to cache more objects rather
than few larger objects.
- If object cache is enabled default GC
percent has been reduced to 20% in lieu
with newly found behavior of GC. If the cache
utilization reaches 75% of the maximum value
GC percent is reduced to 10% to make GC
more aggressive.
- Do not use *bytes.Buffer* due to its growth
requirements. For every allocation *bytes.Buffer*
allocates an additional buffer for its internal
purposes. This is undesirable for us, so
implemented a new cappedWriter which is capped to a
desired size, beyond this all writes rejected.
Possible fix for #3403.
This is needed to validate if the `format.json` indeed exists
when a fresh node is brought online.
This wrapped implementation also connects to the remote node
by attempting a re-login. Subsequently after a successful
connect `format.json` is validated as well.
Fixes#3207
