Currently, there is a short time window where the code is allowed
to save the status of a replication resync. Currently, the window is
`now.Sub(st.EndTime) <= resyncTimeInterval`. Also, any failure to
write in the backend disks is not retried.
Refactor the code a little bit to rely on the last timestamp of a
successful write of the resync status of any given bucket in the
backend disks.
When replication is enabled in a particular bucket, the listing will send
objects to bucket replication, but it is also sending prefixes for non
recursive listing which is useless and shows a lot of error logs.
This commit will ignore prefixes.
under some sequence of events following code would
reach an infinite loop.
```
idx1, idx2 := 0, 1
for ; idx2 != idx1; idx2++ {
fmt.Println(idx2)
}
```
fixes#15639
A lot of warning messages are printed in CI/CD failures generated by go
test. Avoid that by requiring at least Error level for logging when
doing go test.
inlined data often is bigger than the allowed
O_DIRECT alignment, so potentially we can write
'xl.meta' without O_DSYNC instead we can rely on
O_DIRECT + fdatasync() instead.
This PR allows O_DIRECT on inlined data that
would gain the benefits of performing O_DIRECT,
eventually performing an fdatasync() at the end.
Performance boost can be observed here for small
objects < 128KiB. The performance boost is mainly
seen on HDD, and marginal on NVMe setups.
When a node finds a change in the other replication cluster and applies
to itself will already notify other peers. No need for all nodes in a
given cluster to do site replication healing, only one node is
sufficient.
This PR improves the replication failure healing by persisting
most recent failures to disk and re-queuing them until the replication
is successful.
While this does not eliminate the need for healing during a full scan,
queuing MRF vastly improves the ETA to keeping replicated buckets
in sync as it does not wait for the scanner visit to detect unreplicated
object versions.
competing calls on the same object on versioned bucket
mutating calls on the same object may unexpected have
higher delays.
This can be reproduced with a replicated bucket
overwriting the same object writes, deletes repeatedly.
For longer locks like scanner keep the 1sec interval
This PR fixes possible leaks that may emanate from not
listening on context cancelation or timeouts.
```
goroutine 60957610 [chan send, 16 minutes]:
github.com/minio/minio/cmd.(*erasureServerPools).Walk.func1.1.1(...)
github.com/minio/minio/cmd/erasure-server-pool.go:1724 +0x368
github.com/minio/minio/cmd.listPathRaw({0x4a9a740, 0xc0666dffc0},...
github.com/minio/minio/cmd/metacache-set.go:1022 +0xfc4
github.com/minio/minio/cmd.(*erasureServerPools).Walk.func1.1()
github.com/minio/minio/cmd/erasure-server-pool.go:1764 +0x528
created by github.com/minio/minio/cmd.(*erasureServerPools).Walk.func1
github.com/minio/minio/cmd/erasure-server-pool.go:1697 +0x1b7
```
The bottom line is delete markers are a nuisance,
most applications are not version aware and this
has simply complicated the version management.
AWS S3 gave an unnecessary complication overhead
for customers, they need to now manage these
markers by applying ILM settings and clean
them up on a regular basis.
To make matters worse all these delete markers
get replicated as well in a replicated setup,
requiring two ILM settings on each site.
This PR is an attempt to address this inferior
implementation by deviating MinIO towards an
idempotent delete marker implementation i.e
MinIO will never create any more than single
consecutive delete markers.
This significantly reduces operational overhead
by making versioning more useful for real data.
This is an S3 spec deviation for pragmatic reasons.
Queue failed/pending replication for healing during listing and GET/HEAD
API calls. This includes healing of existing objects that were never
replicated or those in the middle of a resync operation.
This PR also fixes a bug in ListObjectVersions where lifecycle filtering
should be done.
when object speedtest is running keep writing
previous speedtest result back to client until
we have a new result - this avoids sending back
blank entries in between the speedtest when it
is running in 'autotune' mode.
```
commit 7bdaf9bc50
Author: Aditya Manthramurthy <donatello@users.noreply.github.com>
Date: Wed Jul 24 17:34:23 2019 -0700
Update on-disk storage format for users system (#7949)
```
Bonus: fixes a bug when etcd keys were being re-encrypted.
Currently, the code doesn't check if the user creating a bucket with
locking feature has bucket locking and versioning permissions enabled,
adding it in accordance with S3 spec.
https://docs.aws.amazon.com/AmazonS3/latest/API/API_CreateBucket.html
Object Lock - If ObjectLockEnabledForBucket is set to true in your CreateBucket request,
s3:PutBucketObjectLockConfiguration and s3:PutBucketVersioning permissions are required.
Capture average, p50, p99, p999 response times
and ttfb values. These are needed for latency
measurements and overall understanding of our
speedtest results.
listConfigItems creates a goroutine but sometimes callers will
exit without properly asking listAllIAMConfigItems() to stop sending
results, hence a goroutine leak.
Create a new context and cancel it for each listAllIAMConfigItems
call.
This commit adds support for automatically reloading
the MinIO client certificate for authentication to KES.
The client certificate will now be reloaded:
- when the private key / certificate file changes
- when a SIGHUP signal is received
- every 15 minutes
Fixes#14869
Signed-off-by: Andreas Auernhammer <hi@aead.dev>
The path is marked dirty automatically when healObject() is called, which is
wrong. HealObject() is called during self-healing and this will lead to
an increase in the false positive result of the bloom filter.
Also move NSUpdated() from renameData() and call it directly in
CompleteMultipart and PutObject, this is not a functional change but
it will make it less prone to errors in the future.
smaller setups may have less drives per server choosing
the concurrency based on number of local drives, and let
the MinIO server change the overall concurrency as
necessary.
It is possible for anyone with admin access to relatively
to get any content of any random OS location by simply
providing the file with 'mc admin update alias/ /etc/passwd`.
Workaround is to disable 'admin:ServiceUpdate' action. Everyone
is advised to upgrade to this patch.
Thanks to @alevsk for finding this bug.
this has been observed in multiple environments
where the setups are small `speedtest` naturally
fails with default '10s' and the concurrency
of '32' is big for such clusters.
choose a smaller value i.e equal to number of
drives in such clusters and let 'autotune'
increase the concurrency instead.
fixes#15334
- re-use net/url parsed value for http.Request{}
- remove gosimple, structcheck and unusued due to https://github.com/golangci/golangci-lint/issues/2649
- unwrapErrs upto leafErr to ensure that we store exactly the correct errors
"consoleAdmin" was used as the policy for root derived accounts, but this
lead to unexpected bugs when an administrator modified the consoleAdmin
policy
This change avoids evaluating a policy for root derived accounts as by
default no policy is mapped to the root user. If a session policy is
attached to a root derived account, it will be evaluated as expected.
This PR changes the handling of bucket deletes for site
replicated setups to hold on to deleted bucket state until
it syncs to all the clusters participating in site replication.
Currently, if one server in a distributed setup fails to upgrade
due to any reasons, it is not possible to upgrade again unless
nodes are restarted.
To fix this, split the upgrade process into two steps :
- download the new binary on all servers
- If successful, overwrite the old binary with the new one
This commit replaces `ioutil.TempDir` with `t.TempDir` in tests. The
directory created by `t.TempDir` is automatically removed when the test
and all its subtests complete.
Prior to this commit, temporary directory created using `ioutil.TempDir`
needs to be removed manually by calling `os.RemoveAll`, which is omitted
in some tests. The error handling boilerplate e.g.
defer func() {
if err := os.RemoveAll(dir); err != nil {
t.Fatal(err)
}
}
is also tedious, but `t.TempDir` handles this for us nicely.
Reference: https://pkg.go.dev/testing#T.TempDir
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Add cluster info to inspect and profiling archive.
In addition to the existing data generation for both inspect and profiling,
cluster.info file is added. This latter contains some info of the cluster.
The generation of cluster.info is is done as the last step and it can fail
if it exceed 10 seconds.
a/b/c/d/ where `a/b/c/` exists results in additional syscalls
such as an Lstat() call to verify if the `a/b/c/` exists
and its a directory.
We do not need to do this on MinIO since the parent prefixes
if exist, we can simply return success without spending
additional syscalls.
Also this implementation attempts to simply use Access() calls
to avoid os.Stat() calls since the latter does memory allocation
for things we do not need to use.
Access() is simpler since we have a predictable structure on
the backend and we know exactly how our path structures are.
A huge number of goroutines would build up from various monitors
When creating test filesystems provide a context so they can shut down when no longer needed.
Do completely independent multipart uploads.
In distributed mode, a lock was held to merge each multipart
upload as it was added. This lock was highly contested and
retries are expensive (timewise) in distributed mode.
Instead, each part adds its metadata information uniquely.
This eliminates the per object lock required for each to merge.
The metadata is read back and merged by "CompleteMultipartUpload"
without locks when constructing final object.
Co-authored-by: Harshavardhana <harsha@minio.io>
This commit adds a `context.Context` to the
the KMS `{Stat, CreateKey, GenerateKey}` API
calls.
The context will be used to terminate external calls
as soon as the client requests gets canceled.
A follow-up PR will add a `context.Context` to
the remaining `DecryptKey` API call.
Signed-off-by: Andreas Auernhammer <hi@aead.dev>
Uploading a part object can leave an inconsistent state inside
.minio.sys/multipart where data are uploaded but xl.meta is not
committed yet.
Do not list upload-ids that have this state in the multipart listing.
Add up to 256 bytes of padding for compressed+encrypted files.
This will obscure the obvious cases of extremely compressible content
and leave a similar output size for a very wide variety of inputs.
This does *not* mean the compression ratio doesn't leak information
about the content, but the outcome space is much smaller,
so often *less* information is leaked.
Make bucket requests sent after decommissioning is started are not
created in a suspended pool. Therefore listing buckets should avoid
suspended pools as well.
Rename Trigger -> Event to be a more appropriate
name for the audit event.
Bonus: fixes a bug in AddMRFWorker() it did not
cancel the waitgroup, leading to waitgroup leaks.
There is no point in compressing very small files.
Typically the effective size on disk will be the same due to disk blocks.
So don't waste resources on extremely small files.
We don't check on multipart. 1) because we don't know and 2) this is very likely a big object anyway.
This commit adds a minimal set of KMS-related metrics:
```
# HELP minio_cluster_kms_online Reports whether the KMS is online (1) or offline (0)
# TYPE minio_cluster_kms_online gauge
minio_cluster_kms_online{server="127.0.0.1:9000"} 1
# HELP minio_cluster_kms_request_error Number of KMS requests that failed with a well-defined error
# TYPE minio_cluster_kms_request_error counter
minio_cluster_kms_request_error{server="127.0.0.1:9000"} 16790
# HELP minio_cluster_kms_request_success Number of KMS requests that succeeded
# TYPE minio_cluster_kms_request_success counter
minio_cluster_kms_request_success{server="127.0.0.1:9000"} 348031
```
Currently, we report whether the KMS is available and how many requests
succeeded/failed. However, KES exposes much more metrics that can be
exposed if necessary. See: https://pkg.go.dev/github.com/minio/kes#Metric
Signed-off-by: Andreas Auernhammer <hi@aead.dev>
If more than 1M folders (objects or prefixes) are found at the top level in a bucket allow it to be compacted.
While very suboptimal structure we should limit memory usage at some point.
GetDiskInfo() uses timedValue to cache the disk info for one second.
timedValue behavior was recently changed to return an old cached value
when calculating a new value returns an error.
When a mount point is empty, GetDiskInfo() will return errUnformattedDisk,
timedValue will return cached disk info with unexpected IsRootDisk value,
e.g. false if the mount point belongs to a root disk. Therefore, the mount
point will be considered a valid disk and will be formatted as well.
This commit will also add more defensive code when marking root disks:
always mark a disk offline for any GetDiskInfo() error except
errUnformattedDisk. The server will try anyway to reconnect to those
disks every 10 seconds.
it is not safe to pass around sync.Map
through pointers, as it may be concurrently
updated by different callers.
this PR simplifies by avoiding sync.Map
altogether, we do not need sync.Map
to keep object->erasureMap association.
This PR fixes a crash when concurrently
using this value when audit logs are
configured.
```
fatal error: concurrent map iteration and map write
goroutine 247651580 [running]:
runtime.throw({0x277a6c1?, 0xc002381400?})
runtime/panic.go:992 +0x71 fp=0xc004d29b20 sp=0xc004d29af0 pc=0x438671
runtime.mapiternext(0xc0d6e87f18?)
runtime/map.go:871 +0x4eb fp=0xc004d29b90 sp=0xc004d29b20 pc=0x41002b
```
The current code uses approximation using a ratio. The approximation
can skew if we have multiple pools with different disk capacities.
Replace the algorithm with a simpler one which counts data
disks and ignore parity disks.
fix: allow certain mutation on objects during decommission
currently by mistake deletion of objects was skipped,
if the object resided on the pool being decommissioned.
delete's are okay to be allowed since decommission is
designed to run on a cluster with active I/O.
Small uploads spend a significant amount of time (~5%) fetching disk info metrics. Also maps are allocated for each call.
Add a 100ms cache to disk metrics.
versioned buckets were not creating the delete markers
present in the versioned stack of an object, this essentially
would stop decommission to succeed.
This PR fixes creating such delete markers properly during
a decommissioning process, adds tests as well.
Current code incorrectly passed the
config asset object name while decommissioning,
make sure that we pass the right object name
to be hashed on the newer set of pools.
This PR fixes situations after a successful
decommission, the users and policies might go
missing due to wrong hashed set.
also use designated names for internal
calls
- storageREST calls are storageR
- lockREST calls are lockR
- peerREST calls are just peer
Named in this fashion to facilitate wildcard matches
by having prefixes of the same name.
Additionally, also enable funcNames for generic handlers
that return errors, currently we disable '<unknown>'
In a replicated setup, when an object is updated in one cluster but
still waiting to be replicated to the other cluster, GET requests with
if-match, and range headers will likely fail. It is better to proxy
requests instead.
Also, this commit avoids printing verbose logs about precondition &
range errors.
fix: change timedvalue to return previous cached value
caller can interpret the underlying error and decide
accordingly, places where we do not interpret the
errors upon timedValue.Get() - we should simply use
the previously cached value instead of returning "empty".
Bonus: remove some unused code
Add a generic handler that adds a new tracing context to the request if
tracing is enabled. Other handlers are free to modify the tracing
context to update information on the fly, such as, func name, enable
body logging etc..
With this commit, requests like this
```
curl -H "Host: ::1:3000" http://localhost:9000/
```
will be traced as well.
Directories markers are not healed when healing a new fresh disk. A
a proper fix would be moving object names encoding/decoding to erasure
object level but it is too late now since the object to set distribution is
calculated at a higher level.
It is observed in a local 8 drive system the CPU seems to be
bottlenecked at
```
(pprof) top
Showing nodes accounting for 1385.31s, 88.47% of 1565.88s total
Dropped 1304 nodes (cum <= 7.83s)
Showing top 10 nodes out of 159
flat flat% sum% cum cum%
724s 46.24% 46.24% 724s 46.24% crypto/sha256.block
219.04s 13.99% 60.22% 226.63s 14.47% syscall.Syscall
158.04s 10.09% 70.32% 158.04s 10.09% runtime.memmove
127.58s 8.15% 78.46% 127.58s 8.15% crypto/md5.block
58.67s 3.75% 82.21% 58.67s 3.75% github.com/minio/highwayhash.updateAVX2
40.07s 2.56% 84.77% 40.07s 2.56% runtime.epollwait
33.76s 2.16% 86.93% 33.76s 2.16% github.com/klauspost/reedsolomon._galMulAVX512Parallel84
8.88s 0.57% 87.49% 11.56s 0.74% runtime.step
7.84s 0.5% 87.99% 7.84s 0.5% runtime.memclrNoHeapPointers
7.43s 0.47% 88.47% 22.18s 1.42% runtime.pcvalue
```
Bonus changes:
- re-use transport for bucket replication clients, also site replication clients.
- use 32KiB buffer for all read and writes at transport layer seems to help
TLS read connections.
- Do not have 'MaxConnsPerHost' this is problematic to be used with net/http
connection pooling 'MaxIdleConnsPerHost' is enough.
- Always reformat all disks when a new disk is detected, this will
ensure new uploads to be written in new fresh disks
- Always heal all buckets first when an erasure set started to be healed
- Use a lock to prevent two disks belonging to different nodes but in
the same erasure set to be healed in parallel
- Heal different sets in parallel
Bonus:
- Avoid logging errUnformattedDisk when a new fresh disk is inserted but
not detected by healing mechanism yet (10 seconds lag)
site replication errors were printed at
various random locations, repeatedly - this
PR attempts to remove double logging and
capture all of them at a common place.
This PR also enhances the code to show
partial success and errors as well.
`mc admin heal -r <alias>` in a multi setup pools returns incorrectly
grey objects. The reason is that erasure-server-pools.HealObject() runs
HealObject in all pools and returns the result of the first nil
error. However, in the lower erasureObject level, HealObject() returns
nil if an object does not exist + missing error in each disk of the object
in that pool, therefore confusing mc.
Make erasureObject.HealObject() to return not found error in the lower
level, so at least erasureServerPools will know what pools to ignore.
`config.ResolveConfigParam` returns the value of a configuration for any
subsystem based on checking env, config store, and default value. Also returns info
about which config source returned the value.
This is useful to return info about config params overridden via env in the user
APIs. Currently implemented only for OpenID subsystem, but will be extended for
others subsequently.
If sending a white space during a long S3 handler call fails,
the whitespace goroutine forgets to return a result to the caller.
Therefore, the complete multipart handler will be blocked.
Remember to send the header written result to the caller
or/and close the channel.
- currently subnet health check was freezing and calling
locks at multiple locations, avoid them.
- throw errors if first attempt itself fails with no results
Erasure SD DeleteObjects() is only inheriting bucket versioning status
from the handler layer.
Add the missing versioning prefix evaluation for each object that will
deleted.
PR #15052 caused a regression, add the missing metrics back.
Bonus:
- internode information should be only for distributed setups
- update the dashboard to include 4xx and 5xx error panels.
this allows for customers to use `mc admin service restart`
directly even when performing RPM, DEB upgrades. Upon such 'restart'
after upgrade MinIO will re-read the /etc/default/minio for any
newer environment variables.
As long as `MINIO_CONFIG_ENV_FILE=/etc/default/minio` is set, this
is honored.
Currently minio_s3_requests_errors_total covers 4xx and
5xx S3 responses which can be confusing when s3 applications
sent a lot of HEAD requests with obvious 404 responses or
when the replication is enabled.
Add
- minio_s3_requests_4xx_errors_total
- minio_s3_requests_5xx_errors_total
to help users monitor 4xx and 5xx HTTP status codes separately.
peerOnlineCounter was making NxN calls to many peers, this
can be really long and tedious if there are random servers
that are going down.
Instead we should calculate online peers from the point of
view of "self" and return those online and offline appropriately
by performing a healthcheck.
* Add periodic callhome functionality
Periodically (every 24hrs by default), fetch callhome information and
upload it to SUBNET.
New config keys under the `callhome` subsystem:
enable - Set to `on` for enabling callhome. Default `off`
frequency - Interval between callhome cycles. Default `24h`
* Improvements based on review comments
- Update `enableCallhome` safely
- Rename pctx to ctx
- Block during execution of callhome
- Store parsed proxy URL in global subnet config
- Store callhome URL(s) in constants
- Use existing global transport
- Pass auth token to subnetPostReq
- Use `config.EnableOn` instead of `"on"`
* Use atomic package instead of lock
* Use uber atomic package
* Use `Cancel` instead of `cancel`
Co-authored-by: Harshavardhana <harsha@minio.io>
Co-authored-by: Harshavardhana <harsha@minio.io>
Co-authored-by: Aditya Manthramurthy <donatello@users.noreply.github.com>
PR #15041 fixed replicating 'null' version however
due to a regression from #14994 caused the target
versions for these 'null' versioned objects to have
different 'versions', this may cause confusion with
bi-directional replication and cause double replication.
This PR fixes this properly by making sure we replicate
the correct versions on the objects.
mergeEntryChannels has the potential to perpetually
wait on the results channel, context might be closed
and we did not honor the caller context canceling.
The S3 service can be frozen indefinitely if a client or mc asks for object
perf API but quits early or has some networking issues. The reason is
that partialWrite() can block indefinitely.
This commit makes partialWrite() listens to context cancellation as well. It
also renames deadlinedCtx to healthCtx since it covers handler context
cancellation and not only not only the speedtest deadline.
In a streaming response, the client knows the size of a streamed
message but never checks the message size. Add the check to error
out if the response message is truncated.
Indexed streams would be decoded by the legacy loader if there
was an error loading it. Return an error when the stream is indexed
and it cannot be loaded.
Fixes "unknown minor metadata version" on corrupted xl.meta files and
returns an actual error.
We need to make sure if we cannot read bucket metadata
for some reason, and bucket metadata is not missing and
returning corrupted information we should panic such
handlers to disallow I/O to protect the overall state
on the system.
In-case of such corruption we have a mechanism now
to force recreate the metadata on the bucket, using
`x-minio-force-create` header with `PUT /bucket` API
call.
Additionally fix the versioning config updated state
to be set properly for the site replication healing
to trigger correctly.
readAllXL would return inlined data for outdated disks
causing "read" to return incorrect content to the client,
this PR fixes this behavior by making sure we skip such
outdated disks appropriately based on the latest ModTime
on the disk.
Main motivation is move towards a common backend format
for all different types of modes in MinIO, allowing for
a simpler code and predictable behavior across all features.
This PR also brings features such as versioning, replication,
transitioning to single drive setups.
Following code can reproduce an unending go-routine buildup,
while keeping connections established due to lack of client
not closing the connections.
https://gist.github.com/harshavardhana/2d00e6f909054d2d2524c71485ad02e1
Without this PR all MinIO deployments can be put into
denial of service attacks, causing entire service to be
unavailable.
We bring in two timeouts at this stage to control such
go-routine build ups, new change
- IdleTimeout (to kill off idle connections)
- ReadHeaderTimeout (to kill off connections that are too slow)
This new change also brings two hidden options to make any
additional relevant changes if desired in some setups.
It would seem like the PR #11623 had chewed more
than it wanted to, non-fips build shouldn't really
be forced to use slower crypto/sha256 even for
presumed "non-performance" codepaths. In MinIO
there are really no "non-performance" codepaths.
This assumption seems to have had an adverse
effect in certain areas of CPU usage.
This PR ensures that we stick to sha256-simd
on all non-FIPS builds, our most common build
to ensure we get the best out of the CPU at
any given point in time.
- Adds an STS API `AssumeRoleWithCustomToken` that can be used to
authenticate via the Id. Mgmt. Plugin.
- Adds a sample identity manager plugin implementation
- Add doc for plugin and STS API
- Add an example program using go SDK for AssumeRoleWithCustomToken
this PR also fixes a situation where incorrect
partsMetadata slice was used where fi.Data was
re-used from a single drive causing duplication
of the shards across all drives.
This happens for situations where shouldHeal()
returns true for all drives > parityBlocks.
To avoid this we should never attempt to heal on all
drives > parityBlocks, unless we are doing metadata
migration from xl.json -> xl.meta
If one or more pools reach 85% usage in a set, we will only
use pools that have more free space.
In case all pools are above 85% we allow all of them to be used
with the regular distribution.
When a server pool with a different number of sets is added they are
not compensated when choosing a destination pool for new objects.
This leads to the unbalanced placement of objects with smaller pools
getting a bigger number of objects since we only compare the destination
sets directly.
This change will compensate for differences in set sizes when choosing
the destination pool.
Different set sizes are already compensated by fewer disks.
updating metadata with CopyObject on a versioned bucket
causes the latest version to be not readable, this PR fixes
this properly by handling the inline data bug fix introduced
in PR #14780.
This bug affects only inlined data.
* Do not use inline data size in xl.meta quorum calculation
Data shards of one object can different inline/not-inline decision
in multiple disks. This happens with outdated disks when inline
decision changes. For example, enabling bucket versioning configuration
will change the small file threshold.
When the parity of an object becomes low, GET object can return 503
because it is not unable to calculate the xl.meta quorum, just because
some xl.meta has inline data and other are not.
So this commit will be disable taking the size of the inline data into
consideration when calculating the xl.meta quorum.
* Add tests for simulatenous inline/notinline object
Co-authored-by: Anis Elleuch <anis@min.io>
current implementation relied on recursively calling one bucket
at a time across all peers, this would be very slow and chatty
when there are 100's of buckets which would mean 100*peerCount
amount of network operations.
This PR attempts to reduce this entire call into `peerCount`
amount of network calls only. This functionality addresses also a
concern where the Prometheus metrics would significantly slow
down when one of the peers is offline.
Fix fallback hot loop
fd was never refreshed, leading to an infinite hot loop if a disk failed and the fallback disk fails as well.
Fix & simplify retry loop.
Fixes#14960
One usee reported having mc admin heal status output ETA increasing
by time. It turned out it is MRF that is not clearing its data due to a
bug in the code.
pendingItems is increased when an object is queued to be healed but
never decreasd when there is a healing error. This commit will decrease
pendingItems and pendingBytes even when there is an error to give
accurate reporting.
If LDAP is enabled, STS security token policy is evaluated using a
different code path and expects ldapUser claim to exist in the security
token. This means other STS temporary accounts generated by any Assume
Role function, such as AssumeRoleWithCertificate, won't be allowed to do any
operation as these accounts do not have LDAP user claim.
Since IsAllowedLDAPSTS() is similar to IsAllowedSTS(), this commit will
merge both.
Non harmful changes:
- IsAllowed for LDAP will start supporting RoleARN claim
- IsAllowed for LDAP will not check for parent claim anymore. This check doesn't
seem to be useful since all STS login compare access/secret/security-token
with the one saved in the disk.
- LDAP will support $username condition in policy documents.
Co-authored-by: Anis Elleuch <anis@min.io>
Co-authored-by: Aditya Manthramurthy <donatello@users.noreply.github.com>
.Reset() documentation states:
For a Timer created with NewTimer, Reset should be invoked only on stopped
or expired timers with drained channels.
This change is just to comply with this requirement as there might be some
runtime dependent situation that might lead to unexpected behavior.
it seems in some places we have been wrongly using the
timer.Reset() function, nicely exposed by an example
shared by @donatello https://go.dev/play/p/qoF71_D1oXD
this PR fixes all the usage comprehensively
anything that is stuck on the disk today can cause latency
spikes for all incoming S3 I/O, we need to have this
de-coupled so that we can make sure that latency in loading
credentials are not reflected back to the S3 API calls.
The approach this PR takes is by checking if the calls were
updated just in case when the IAM load was in progress,
so that we can use merge instead of "replacement" to avoid
missing state.
The test expects from DeleteFile to return errDiskNotFound when the disk
is not available. It calls os.RemoveAll() to remove one disk after XL storage
initialization. However, this latter contains some goroutines which can
race with os.RemoveAll() and then the test fails sporadically with
returning random errors.
The commit will tweak the initialization routine of the XL storage to
only run deletion of temporary and metacache data in the background,
so TestXLStorageDeleteFile won't fail anymore.
currently, we allowed buckets to be listed from the
API call if and when the user has ListObject()
permission at the global level, this is okay to be
extended to GetBucketLocation() as well since
GetBucketLocation() is a "read" call and allowing "reads"
on a bucket has an implicit assumption that ListBuckets()
should be allowed.
This makes discoverability of access for read-only users
becomes easier or users with specific restrictions on their
policies.
This PR simplifies few things by splitting
the locks between audit, logger targets to
avoid potential contention between them.
any failures inside audit/logger HTTP
targets must only log to console instead
of other targets to avoid cyclical dependency.
avoids unneeded atomic variables instead
uses RWLock to differentiate a more common
read phase v/s lock phase.
- This change renames the OPA integration as Access Management Plugin - there is
nothing specific to OPA in the integration, it is just a webhook.
- OPA configuration is automatically migrated to Access Management Plugin and
OPA specific configuration is marked as deprecated.
- OPA doc is updated and moved.
In case of multi-pools setup, GetObjectNInfo returns a GetObjectReader
but it unlocks the read lock when quitting GetObjectNInfo. This should
not happen, unlock should only happen when GetObjectReader is closed.
- do not need to restrict prefix exclusions that do not
have `/` as suffix, relax this requirement as spark may
have staging folders with other autogenerated characters
, so we are better off doing full prefix March and skip.
- multiple delete objects was incorrectly creating a
null delete marker on a versioned bucket instead of
creating a proper versioned delete marker.
- do not suspend paths on the excluded prefixes during
delete operations to avoid creating `null` delete markers,
honor suspension of versioning only at bucket level for
delete markers.
PR #14828 introduced prefix-level exclusion of versioning
and replication - however our site replication implementation
since it defaults versioning on all buckets did not allow
changing versioning configuration once the bucket was created.
This PR changes this and ensures that such changes are honored
and also propagated/healed across sites appropriately.
Spark/Hadoop workloads which use Hadoop MR
Committer v1/v2 algorithm upload objects to a
temporary prefix in a bucket. These objects are
'renamed' to a different prefix on Job commit.
Object storage admins are forced to configure
separate ILM policies to expire these objects
and their versions to reclaim space.
Our solution:
This can be avoided by simply marking objects
under these prefixes to be excluded from versioning,
as shown below. Consequently, these objects are
excluded from replication, and don't require ILM
policies to prune unnecessary versions.
- MinIO Extension to Bucket Version Configuration
```xml
<VersioningConfiguration xmlns="http://s3.amazonaws.com/doc/2006-03-01/">
<Status>Enabled</Status>
<ExcludeFolders>true</ExcludeFolders>
<ExcludedPrefixes>
<Prefix>app1-jobs/*/_temporary/</Prefix>
</ExcludedPrefixes>
<ExcludedPrefixes>
<Prefix>app2-jobs/*/__magic/</Prefix>
</ExcludedPrefixes>
<!-- .. up to 10 prefixes in all -->
</VersioningConfiguration>
```
Note: `ExcludeFolders` excludes all folders in a bucket
from versioning. This is required to prevent the parent
folders from accumulating delete markers, especially
those which are shared across spark workloads
spanning projects/teams.
- To enable version exclusion on a list of prefixes
```
mc version enable --excluded-prefixes "app1-jobs/*/_temporary/,app2-jobs/*/_magic," --exclude-prefix-marker myminio/test
```
when the site is being removed is missing replication config. This can
happen when a new deployment is brought in place of a site that
is lost/destroyed and needs to delink old deployment from site
replication.
console logging peer API was broken as it would
timeout after 15minutes, this never really worked
beyond this value and basically failed to provide
the streaming "log" functionality that was expected
from this implementation.
also fix convoluted channel handling by keeping things
simple, this is rewritten.
do not modify opts.UserDefined after object-handler
has set all the necessary values, any mutation needed
should be done on a copy of this value not directly.
As there are other pieces of code that access opts.UserDefined
concurrently this becomes challenging.
fixes#14856
When a decommission task is successfully completed, failed, or canceled,
this commit allows restarting the decommission again. Restarting is not
allowed when there is an ongoing decommission task.
this PR introduces a few changes such as
- sessionPolicyName is not reused in an extracted manner
to apply policies for incoming authenticated calls,
instead uses a different key to designate this
information for the callers.
- this differentiation is needed to ensure that service
account updates do not accidentally store JSON representation
instead of base64 equivalent on the disk.
- relax requirements for Deleting a service account, allow
deleting a service account that might be unreadable, i.e
a situation where the user might have removed session policy
which now carries a JSON representation, making it unparsable.
- introduce some constants to reuse instead of strings.
fixes#14784
If an invalid status code is generated from an error we risk panicking. Even if there
are no potential problems at the moment we should prevent this in the future.
Add safeguards against this.
Sample trace:
```
May 02 06:41:39 minio[52806]: panic: "GET /20180401230655.PDF": invalid WriteHeader code 0
May 02 06:41:39 minio[52806]: goroutine 16040430822 [running]:
May 02 06:41:39 minio[52806]: runtime/debug.Stack(0xc01fff7c20, 0x25c4b00, 0xc0490e4080)
May 02 06:41:39 minio[52806]: runtime/debug/stack.go:24 +0x9f
May 02 06:41:39 minio[52806]: github.com/minio/minio/cmd.setCriticalErrorHandler.func1.1(0xc022048800, 0x4f38ab0, 0xc0406e0fc0)
May 02 06:41:39 minio[52806]: github.com/minio/minio/cmd/generic-handlers.go:469 +0x85
May 02 06:41:39 minio[52806]: panic(0x25c4b00, 0xc0490e4080)
May 02 06:41:39 minio[52806]: runtime/panic.go:965 +0x1b9
May 02 06:41:39 minio[52806]: net/http.checkWriteHeaderCode(...)
May 02 06:41:39 minio[52806]: net/http/server.go:1092
May 02 06:41:39 minio[52806]: net/http.(*response).WriteHeader(0xc0406e0fc0, 0x0)
May 02 06:41:39 minio[52806]: net/http/server.go:1126 +0x718
May 02 06:41:39 minio[52806]: github.com/minio/minio/internal/logger.(*ResponseWriter).WriteHeader(0xc032fa3ea0, 0x0)
May 02 06:41:39 minio[52806]: github.com/minio/minio/internal/logger/audit.go:116 +0xb1
May 02 06:41:39 minio[52806]: github.com/minio/minio/internal/logger.(*ResponseWriter).WriteHeader(0xc032fa3f40, 0x0)
May 02 06:41:39 minio[52806]: github.com/minio/minio/internal/logger/audit.go:116 +0xb1
May 02 06:41:39 minio[52806]: github.com/minio/minio/internal/logger.(*ResponseWriter).WriteHeader(0xc002ce8000, 0x0)
May 02 06:41:39 minio[52806]: github.com/minio/minio/internal/logger/audit.go:116 +0xb1
May 02 06:41:39 minio[52806]: github.com/minio/minio/cmd.writeResponse(0x4f364a0, 0xc002ce8000, 0x0, 0xc0443b86c0, 0x1cb, 0x224, 0x2a9651e, 0xf)
May 02 06:41:39 minio[52806]: github.com/minio/minio/cmd/api-response.go:736 +0x18d
May 02 06:41:39 minio[52806]: github.com/minio/minio/cmd.writeErrorResponse(0x4f44218, 0xc069086ae0, 0x4f364a0, 0xc002ce8000, 0x0, 0x0, 0x0, 0x0, 0x0, 0xc00656afc0)
May 02 06:41:39 minio[52806]: github.com/minio/minio/cmd/api-response.go:798 +0x306
May 02 06:41:39 minio[52806]: github.com/minio/minio/cmd.objectAPIHandlers.getObjectHandler(0x4b73768, 0x4b73730, 0x4f44218, 0xc069086ae0, 0x4f82090, 0xc002d80620, 0xc040e03885, 0xe, 0xc040e03894, 0x61, ...)
May 02 06:41:39 minio[52806]: github.com/minio/minio/cmd/object-handlers.go:456 +0x252c
```
space characters at the beginning or at the end can lead to
confusion under various UI elements in differentiating the
actual name of "policy, user or group" - to avoid this behavior
this PR onwards we shall reject such inputs for newer entries.
existing saved entries will behave as is and are going to be
operable until they are removed/renamed to something more
meaningful.
- When using multiple providers, claim-based providers are not allowed. All
providers must use role policies.
- Update markdown config to allow `details` HTML element
this is allowed as long as order is preserved as is
on an existing setup, the new command line is updated
in `pool.bin` to facilitate future decommission's on
these pools.
introduce x-minio-force-create environment variable
to force create a bucket and its metadata as required,
it is useful in some situations when bucket metadata
needs recovery.
improvements in this PR include
- decommission objects that have __XLDIR__ suffix
- decommission objects that have `null` version on
a versioned bucket.
- make sure to look for any "decom" failures to ensure
that we do not wrong conclude decom as complete without
all files getting copied over.
- break out eagerly upon first error for objects with
multiple versions, leave the object as is for support
debugging and analysis.
heal bucket metadata and IAM entries for
sites participating in site replication from
the site with the most updated entry.
Co-authored-by: Harshavardhana <harsha@minio.io>
Co-authored-by: Aditya Manthramurthy <aditya@minio.io>
The site replication status call was using a loop iteration variable sent
directly into go-routines instead of being passed as an argument. As the
variable is being updated in the loop, previously launched go routines do not
necessarily use the value at the time they were launched.
This PR fixes two issues
- The first fix is a regression from #14555, the fix itself in #14555
is correct but the interpretation of that information by the
object layer code for "replication" was not correct. This PR
tries to fix this situation by making sure the "Delete" replication
works as expected when "VersionPurgeStatus" is already set.
Without this fix, there is a DELETE marker created incorrectly on
the source where the "DELETE" was triggered.
- The second fix is perhaps an older problem started since we inlined-data
on the disk for small objects, CopyObject() incorrectly inline's
a non-inlined data. This is due to the fact that we have code where
we read the `part.1` under certain conditions where the size of the
`part.1` is less than the specific "threshold".
This eventually causes problems when we are "deleting" the data that
is only inlined, which means dataDir is ignored leaving such
dataDir on the disk, that looks like an inconsistent content on
the namespace.
fixes#14767
It is wasteful to allow parallel upgrades of MinIO server. This also generates
weird error invoked by selfupdate module when it happens such as:
'rename /opt/bin/.minio.old /opt/bin/..minio.old.old'
currently filterPefix was never used and set
that would filter out entries when needed
when `prefix` doesn't end with `/` - this
often leads to objects getting Walked(), Healed()
that were never requested by the caller.
without this wait there is a potential for some objects
that are in actively being decommissioned would cancel,
however the decommission status might wrongly conclude
this as "Complete".
To avoid this make sure to add waitgroups on the parallel
workers, allowing parallel copies to complete fully before
we return.
In previous releases, mc admin user list would return the list of users
that have policies mapped in IAM database. However, this was removed but
this commit will bring it back until we revamp this.
- This change switches to a new parquet library
- SelectObjectContent now takes a single lock at the beginning and holds it
during the operation. Previously the operation took a lock every time the
parquet library performed a Seek on the underlying object stream.
- Add basic support for LogicalType annotations for timestamps.
Harshavardhana
Anis Elleuch
Klaus Post
Abirdcfly
Krishnan Parthasarathi
Poorna
Febriananda Wida Pramudita
Aditya Manthramurthy
Shireesh Anjal
ebozduman
Andreas Auernhammer
Cesar Celis Hernandez
Eng Zer Jun
jiuker
Minio Trusted
LHHDZ
Praveen raj Mani
haslersn
sota
Krishna Srinivas
Daniel Valdivia
polaris-megrez