listPathRaw() counts errDiskNotFound as a valid error to indicate a
listing stream end. However, storage.WalkDir() is allowed to return
errDiskNotFound anytime since grid.ErrDisconnected is converted to
errDiskNotFound.
This affects fresh disk healing and should affect S3 listing as well.
endpoint: /minio/metrics/v3/system/process
metrics:
- locks_read_total
- locks_write_total
- cpu_total_seconds
- go_routine_total
- io_rchar_bytes
- io_read_bytes
- io_wchar_bytes
- io_write_bytes
- start_time_seconds
- uptime_seconds
- file_descriptor_limit_total
- file_descriptor_open_total
- syscall_read_total
- syscall_write_total
- resident_memory_bytes
- virtual_memory_bytes
- virtual_memory_max_bytes
Since the standard process collector implements only a subset of these
metrics, remove it and implement our own custom process collector that
captures all the process metrics we need.
Since the object is being permanently deleted, the lack of read quorum should not
matter as long as sufficient disks are online to complete the deletion with parity
requirements.
If several pools have the same object with insufficient read quorum, attempt to
delete object from all the pools where it exists
At server startup, LDAP configuration is validated against the LDAP
server. If the LDAP server is down at that point, we need to cleanly
disable LDAP configuration. Previously, LDAP would remain configured but
error out in strange ways because initialization did not complete
without errors.
When importing access keys (i.e. service accounts) for LDAP accounts,
we are requiring groups to exist under one of the configured group base
DNs. This is not correct. This change fixes this by only checking for
existence and storing the normalized form of the group DN - we do not
return an error if the group is not under a base DN.
Test is updated to illustrate an import failure that would happen
without this change.
Existing IAM import logic for LDAP creates new mappings when the
normalized form of the mapping key differs from the existing mapping key
in storage. This change effectively replaces the existing mapping key by
first deleting it and then recreating with the normalized form of the
mapping key.
For e.g. if an older deployment had a policy mapped to a user DN -
`UID=alice1,OU=people,OU=hwengg,DC=min,DC=io`
instead of adding a mapping for the normalized form -
`uid=alice1,ou=people,ou=hwengg,dc=min,dc=io`
we should replace the existing mapping.
This ensures that duplicates mappings won't remain after the import.
Some additional cleanup cases are also covered. If there are multiple
mappings for the name normalized key such as:
`UID=alice1,OU=people,OU=hwengg,DC=min,DC=io`
`uid=alice1,ou=people,ou=hwengg,DC=min,DC=io`
`uid=alice1,ou=people,ou=hwengg,dc=min,dc=io`
we check if the list of policies mapped to all these keys are exactly
the same, and if so remove all of them and create a single mapping with
the normalized key. However, if the policies mapped to such keys differ,
the import operation returns an error as the server cannot automatically
pick the "right" list of policies to map.
`minio_cluster_webhook_queue_length` was wrongly defined as `counter`
where-as it should be `gauge`
Following were wrongly defined as `gauge` when they should actually be
`counter`:
- minio_bucket_replication_sent_bytes
- minio_bucket_replication_received_bytes
- minio_bucket_replication_total_failed_bytes
- minio_bucket_replication_total_failed_count
When LDAP is enabled, previously we were:
- rejecting creation of users and groups via the IAM import functionality
- throwing a `not a valid DN` error when non-LDAP group mappings are present
This change allows for these cases as we need to support situations
where the MinIO server contains users, groups and policy mappings
created before LDAP was enabled.
instead upon any error in renameData(), we still
preserve the existing dataDir in some form for
recoverability in strange situations such as out
of disk space type errors.
Bonus: avoid running list and heal() instead allow
versions disparity to return the actual versions,
uuid to heal. Currently limit this to 100 versions
and lesser disparate objects.
an undo now reverts back the xl.meta from xl.meta.bkp
during overwrites on such flaky setups.
Bonus: Save N depth syscalls via skipping the parents
upon overwrites and versioned updates.
Flaky setup examples are stretch clusters with regular
packet drops etc, we need to add some defensive code
around to avoid dangling objects.
RenameData could start operating on inline data after timing out
and the call returned due to WithDeadline.
This could cause a buffer to write to the inline data being written.
Since no writes are in `RenameData` and the call is canceled,
this doesn't present a corruption issue. But a race is a race and
should be fixed.
Copy inline data to a fresh buffer.
This PR makes a feasible approach to handle all the scenarios
that we must face to avoid returning "panic."
Instead, we must return "errServerNotInitialized" when a
bucketMetadataSys.Get() is called, allowing the caller to
retry their operation and wait.
Bonus fix the way data-usage-cache stores the object.
Instead of storing usage-cache.bin with the bucket as
`.minio.sys/buckets`, the `buckets` must be relative
to the bucket `.minio.sys` as part of the object name.
Otherwise, there is no way to decommission entries at
`.minio.sys/buckets` and their final erasure set positions.
A bucket must never have a `/` in it. Adds code to read()
from existing data-usage.bin upon upgrade.
This PR fixes a few things
- FIPS support for missing for remote transports, causing
MinIO could end up using non-FIPS Ciphers in FIPS mode
- Avoids too many transports, they all do the same thing
to make connection pooling work properly re-use them.
- globalTCPOptions must be set before setting transport
to make sure the client conn deadlines are honored properly.
- GCS warm tier must re-use our transport
- Re-enable trailing headers support.
This reverts commit 928c0181bf.
This change was not correct, reverting.
We track 3 states with the ProxyRequest header - if replication process wants
to know if object is already replicated with a HEAD, it shouldn't proxy back
- Poorna
AWS S3 trailing header support was recently enabled on the warm tier
client connection to MinIO type remote tiers. With this enabled, we are
seeing the following error message at http transport layer.
> Unsolicited response received on idle HTTP channel starting with "HTTP/1.1 400 Bad Request\r\nContent-Type: text/plain; charset=utf-8\r\nConnection: close\r\n\r\n400 Bad Request"; err=<nil>
This is an interim fix until we identify the root cause for this behaviour in the
minio-go client package.
Keep the EC in header, so it can be retrieved easily for dynamic quorum calculations.
To not force a full metadata decode on every read the value will be 0/0 for data written in previous versions.
Size is expected to increase by 2 bytes per version, since all valid values can be represented with 1 byte each.
Example:
```
λ xl-meta xl.meta
{
"Versions": [
{
"Header": {
"EcM": 4,
"EcN": 8,
"Flags": 6,
"ModTime": "2024-04-17T11:46:25.325613+02:00",
"Signature": "0a409875",
"Type": 1,
"VersionID": "8e03504e11234957b2727bc53eda0d55"
},
...
```
Not used for operations yet.
Follow up for #19528
If there are multiple existing DN mappings for the same normalized DN,
if they all have the same policy mapping value, we pick one of them of
them instead of returning an import error.
This is a change to IAM export/import functionality. For LDAP enabled
setups, it performs additional validations:
- for policy mappings on LDAP users and groups, it ensures that the
corresponding user or group DN exists and if so uses a normalized form
of these DNs for storage
- for access keys (service accounts), it updates (i.e. validates
existence and normalizes) the internally stored parent user DN and group
DNs.
This allows for a migration path for setups in which LDAP mappings have
been stored in previous versions of the server, where the name of the
mapping file stored on drives is not in a normalized form.
An administrator needs to execute:
`mc admin iam export ALIAS`
followed by
`mc admin iam import ALIAS /path/to/export/file`
The validations are more strict and returns errors when multiple
mappings are found for the same user/group DN. This is to ensure the
mappings stored by the server are unambiguous and to reduce the
potential for confusion.
Bonus **bug fix**: IAM export of access keys (service accounts) did not
export key name, description and expiration. This is fixed in this
change too.
Reading the list metacache is not protected by a lock; the code retries when it fails
to read the metacache object, however, it forgot to re-read the metacache object
from the drives, which is necessary, especially if the metacache object is inlined.
This commit will ensure that we always re-read the metacache object from the drives
when it is retrying.
When resuming a versioned listing where `version-id-marker=null`, the `null` object would
always be returned, causing duplicate entries to be returned.
Add check against empty version
unlinking() at two different locations on a disk when there
are lots to purge, this can lead to huge IOwaits, instead
rely on rename() to .trash to avoid running multiple unlinks()
in parallel.
since mid 2018 we do not have any deployments
without deployment-id, it is time to put this
code to rest, this PR removes this old code as
its no longer valuable.
on setups with 1000's of drives these are all
quite expensive operations.
The rest of the peer clients were not consistent across nodes. So, meta cache requests
would not go to the same server if a continuation happens on a different node.
When no results match or another error occurs, add an error to the stream. Keep the "inspect-input.txt" as the only thing in the zip for reference.
Example:
```
λ mc support inspect --airgap myminio/testbucket/fjghfjh/**
mc: Using public key from C:\Users\klaus\mc\support_public.pem
File data successfully downloaded as inspect-data.enc
λ inspect inspect-data.enc
Using private key from support_private.pem
output written to inspect-data.zip
2024/04/11 14:10:51 next stream: GetRawData: No files matched the given pattern
λ unzip -l inspect-data.zip
Archive: inspect-data.zip
Length Date Time Name
--------- ---------- ----- ----
222 2024-04-11 14:10 inspect-input.txt
--------- -------
222 1 file
λ
```
Modifies inspect to read until end of stream to report the error.
Bonus: Add legacy commandline params
Add following metrics:
- used_inodes
- total_inodes
- healing
- online
- reads_per_sec
- reads_kb_per_sec
- reads_await
- writes_per_sec
- writes_kb_per_sec
- writes_await
- perc_util
To be able to calculate the `per_sec` values, we capture the IOStats-related
data in the beginning (along with the time at which they were captured),
and compare them against the current values subsequently. This is because
dividing by "time since server uptime." doesn't work in k8s environments.
the disk location never changes in the lifetime of a
MinIO cluster, even if it did validate this close to the
disk instead at the higher layer.
Return appropriate errors indicating an invalid drive, so
that the drive is not recognized as part of a valid
drive.
we have had numerous reports on some config
values not having default values, causing
features misbehaving and not having default
values set properly.
This PR tries to address all these concerns
once and for all.
Each new sub-system that gets added
- must check for invalid keys
- must have default values set
- must not "return err" when being saved into
a global state() instead collate as part of
other subsystem errors allow other sub-systems
to independently initialize.
* Allow specifying the local server, with env variable _MINIO_SERVER_LOCAL, in systems where the hostname cannot be resolved to local IP
* Limit scope of the _MINIO_SERVER_LOCAL solution to only containerized implementations
Return an error when the user specifies endpoints for both source
and target. This can generate many type of errors as the code considers
a deployment remote if its endpoint is specified.
HealObject() does not return an error in some cases, for example, when
an object is successfully reconstructed in one disk but fails with other
disks, another case is when a disk does not have the object is temporarily
disconnected
Add the After heal drives result in the audit output for better
analysis.
Set object's modTime when being restored
restored here refers to making a temporary local copy in the hot tier
for a tiered object using the RestoreObject API
we have been using an LRU caching for internode
auth tokens, migrate to using a typed implementation
and also do not cache auth tokens when its an error.
This fixes a regression from #19358 which prevents policy mappings
created in the latest release from being displayed in policy entity
listing APIs.
This is due to the possibility that the base DNs in the LDAP config are
not in a normalized form and #19358 introduced normalized of mapping
keys (user DNs and group DNs). When listing, we check if the policy
mappings are on entities that parse as valid DNs that are descendants of
the base DNs in the config.
Test added that demonstrates a failure without this fix.
Create new code paths for multiple subsystems in the code. This will
make maintaing this easier later.
Also introduce bugLogIf() for errors that should not happen in the first
place.
This commit replaces the `KMS.Stat` API call with a
`KMS.GenerateKey` call. This approach is more reliable
since data key generation also works when the KMS backend
is unavailable (temp. offline), but KES has cached the
key. Ref: KES offline caching.
With this change, it is less likely that MinIO readiness
checks fail in cases where the KMS backend is offline.
Signed-off-by: Andreas Auernhammer <github@aead.dev>
Make sure to pass a nil pointer as a Transport to minio-go when the API config
is not initialized, this will make sure that we do not pass an interface
with a known type but a nil value.
This will also fix the update of the API remote_transport_deadline
configuration without requiring the cluster restart.
Use `ODirectPoolSmall` buffers for inline data in PutObject.
Add a separate call for inline data that will fetch a buffer for the inline data before unmarshal.
This fixes a bug where STS Accounts map accumulates accounts in memory
and never removes expired accounts and the STS Policy mappings were not
being refreshed.
The STS purge routine now runs with every IAM credentials load instead
of every 4th time.
The listing of IAM files is now cached on every IAM load operation to
prevent re-listing for STS accounts purging/reload.
Additionally this change makes each server pick a time for IAM loading
that is randomly distributed from a 10 minute interval - this is to
prevent server from thundering while performing the IAM load.
On average, IAM loading will happen between every 5-15min after the
previous IAM load operation completes.
If site replication enabled across sites, replicate the SSE-C
objects as well. These objects could be read from target sites
using the same client encryption keys.
Signed-off-by: Shubhendu Ram Tripathi <shubhendu@minio.io>
Instead of relying on user input values, we use the DN value returned by
the LDAP server.
This handles cases like when a mapping is set on a DN value
`uid=svc.algorithm,OU=swengg,DC=min,DC=io` with a user input value (with
unicode variation) of `uid=svc﹒algorithm,OU=swengg,DC=min,DC=io`. The
LDAP server on lookup of this DN returns the normalized value where the
unicode dot character `SMALL FULL STOP` (in the user input), gets
replaced with regular full stop.
Bonus: remove persistent md5sum calculation, turn-off
sha256 as well. Instead we always enable crc32c which
is enough for payload verification also support for
trailing headers checksum.
Fix races in IAM cache
Fixes#19344
On the top level we only grab a read lock, but we write to the cache if we manage to fetch it.
a03dac41eb/cmd/iam-store.go (L446) is also flipped to what it should be AFAICT.
Change the internal cache structure to a concurrency safe implementation.
Bonus: Also switch grid implementation.
we must attempt to convert all errors at storage-rest-client
into StorageErr() regardless of what functionality is being
called in, this PR fixes this for multiple callers including
some internally used functions.
- old version was unable to retain messages during config reload
- old version could not go from memory to disk during reload
- new version can batch disk queue entries to single for to reduce I/O load
- error logging has been improved, previous version would miss certain errors.
- logic for spawning/despawning additional workers has been adjusted to trigger when half capacity is reached, instead of when the log queue becomes full.
- old version would json marshall x2 and unmarshal 1x for every log item. Now we only do marshal x1 and then we GetRaw from the store and send it without having to re-marshal.
panic seen due to premature closing of slow channel while listing is still sending or
list has already closed on the sender's side:
```
panic: close of closed channel
goroutine 13666 [running]:
github.com/minio/minio/internal/ioutil.SafeClose[...](0x101ff51e4?)
/Users/kp/code/src/github.com/minio/minio/internal/ioutil/ioutil.go:425 +0x24
github.com/minio/minio/cmd.(*erasureServerPools).Walk.func1()
/Users/kp/code/src/github.com/minio/minio/cmd/erasure-server-pool.go:2142 +0x170
created by github.com/minio/minio/cmd.(*erasureServerPools).Walk in goroutine 1189
/Users/kp/code/src/github.com/minio/minio/cmd/erasure-server-pool.go:1985 +0x228
```
Object names of directory objects qualified for ExpiredObjectAllVersions
must be encoded appropriately before calling on deletePrefix on their
erasure set.
e.g., a directory object and regular objects with overlapping prefixes
could lead to the expiration of regular objects, which is not the
intention of ILM.
```
bucket/dir/ ---> directory object
bucket/dir/obj-1
```
When `bucket/dir/` qualifies for expiration, the current implementation would
remove regular objects under the prefix `bucket/dir/`, in this case,
`bucket/dir/obj-1`.
In handlers related to health diagnostics e.g. CPU, Network, Partitions,
etc, globalMinioHost was being passed as the addr, resulting in empty
value for the same in the health report.
Using globalLocalNodeName instead fixes the issue.
IAM loading is a lazy operation, allow these
fallbacks to be in place when we cannot find
in-memory state().
this allows us to honor the request even if pay
a small price for lookup and populating the data.
When objects have more versions than their ILM policy expects to retain
via NewerNoncurrentVersions, but they don't qualify for expiry due to
NoncurrentDays are configured in that rule.
In this case, applyNewerNoncurrentVersionsLimit method was enqueuing empty
tasks, which lead to a panic (panic: runtime error: index out of range [0] with
length 0) in newerNoncurrentTask.OpHash method, which assumes the task
to contain at least one version to expire.
When returning the status of a decommissioned pool, a pool with zero
time StartedTime will be considered an active pool, which is unexpected.
This commit will always ensure that a pool's canceled/failed/completed
status is returned.
we were prematurely not writing 4k pages while we
could have due to the fact that most buffers would
be multiples of 4k upto some number and there shall
be some remainder.
We only need to write the remainder without O_DIRECT.
at scale customers might start with failed drives,
causing skew in the overall usage ratio per EC set.
make this configurable such that customers can turn
this off as needed depending on how comfortable they
are.
Currently, the code relies on object parity to decide whether it is a
delete marker or a regular object. In the case of a delete marker, the
return quorum is half of the disks in the erasure set. However, this
calculation must be corrected with objects with EC = 0, mainly
because EC is not a one-time fixed configuration.
Though all data are correct, the manifested symptom is a 503 with an
EC=0 object. This bug was manifested after we introduced the
fast Get Object feature that does not read all data from all disks in
case of inlined objects
Metrics v3 is mainly a reorganization of metrics into smaller groups of
metrics and the removal of internal aggregation of metrics received from
peer nodes in a MinIO cluster.
This change adds the endpoint `/minio/metrics/v3` as the top-level metrics
endpoint and under this, various sub-endpoints are implemented. These
are currently documented in `docs/metrics/v3.md`
The handler will serve metrics at any path
`/minio/metrics/v3/PATH`, as follows:
when PATH is a sub-endpoint listed above => serves the group of
metrics under that path; or when PATH is a (non-empty) parent
directory of the sub-endpoints listed above => serves metrics
from each child sub-endpoint of PATH. otherwise, returns a no
resource found error
All available metrics are listed in the `docs/metrics/v3.md`. More will
be added subsequently.
Merging same-object - multiple versions from different pools would not always result in correct ordering.
When merging keep inputs separate.
```
λ mc ls --versions local/testbucket
------ before ------
[2024-03-05 20:17:19 CET] 228B STANDARD 1f163718-9bc5-4b01-bff7-5d8cf09caf10 v3 PUT hosts
[2024-03-05 20:19:56 CET] 19KiB STANDARD null v2 PUT hosts
[2024-03-05 20:17:15 CET] 228B STANDARD 73c9f651-f023-4566-b012-cc537fdb7ce2 v1 PUT hosts
------ after ------
λ mc ls --versions local/testbucket
[2024-03-05 20:19:56 CET] 19KiB STANDARD null v3 PUT hosts
[2024-03-05 20:17:19 CET] 228B STANDARD 1f163718-9bc5-4b01-bff7-5d8cf09caf10 v2 PUT hosts
[2024-03-05 20:17:15 CET] 228B STANDARD 73c9f651-f023-4566-b012-cc537fdb7ce2 v1 PUT hosts
```
Currently, the progress of the batch job is saved in inside the job
request object, which is normally not supported by MinIO. Though there
is no apparent bug, it is better to fix this now.
Batch progress is saved in .minio.sys/batch-jobs/reports/
Co-authored-by: Anis Eleuch <anis@min.io>
our PoolNumber calculation was costly,
while we already had this information per
endpoint, we needed to deduce it appropriately.
This PR addresses this by assigning PoolNumbers
field that carries all the pool numbers that
belong to a server.
properties.PoolNumber still carries a valid value
only when len(properties.PoolNumbers) == 1, otherwise
properties.PoolNumber is set to math.MaxInt (indicating
that this value is undefined) and then one must rely
on properties.PoolNumbers for server participation
in multiple pools.
addresses the issue originating from #11327
there can be a sudden spike in tiny allocations,
due to too much auditing being done, also don't hang
on the
```
h.logCh <- entry
```
after initializing workers if you do not have a way to
dequeue for some reason.
This commits adds support for using the `--endpoint` arg when creating a
tier of type `azure`. This is needed to connect to Azure's Gov Cloud
instance. For example,
```
mc ilm tier add azure TARGET TIER_NAME \
--account-name ACCOUNT \
--account-key KEY \
--bucket CONTAINER \
--endpoint https://ACCOUNT.blob.core.usgovcloudapi.net
--prefix PREFIX \
--storage-class STORAGE_CLASS
```
Prior to this, the endpoint was hardcoded to `https://ACCOUNT.blob.core.windows.net`.
The docs were even explicit about this, stating that `--endpoint` is:
"Required for `s3` or `minio` tier types. This option has no effect for any
other value of `TIER_TYPE`."
Now, if the endpoint arg is present it will be used. If not, it will
fall back to the same default behavior of `ACCOUNT.blob.core.windows.net`.
Remove api.expiration_workers config setting which was inadvertently left behind. Per review comment
https://github.com/minio/minio/pull/18926, expiration_workers can be configured via ilm.expiration_workers.
ext4, xfs support this behavior however
btrfs, nfs may not support it properly.
in-case when we see Nlink < 2 then we know
that we need to fallback on readdir()
fixes a regression from #19100fixes#19181
The middleware sets up tracing, throttling, gzipped responses and
collecting API stats.
Additionally, this change updates the names of handler functions in
metric labels to be the same as the name derived from Go lang reflection
on the handler name.
The metric api labels are now stored in memory the same as the handler
name - they will be camelcased, e.g. `GetObject` instead of `getobject`.
For compatibility, we lowercase the metric api label values when emitting the metrics.
- Use a shared worker pool for all ILM expiry tasks
- Free version cleanup executes in a separate goroutine
- Add a free version only if removing the remote object fails
- Add ILM expiry metrics to the node namespace
- Move tier journal tasks to expiryState
- Remove unused on-disk journal for tiered objects pending deletion
- Distribute expiry tasks across workers such that the expiry of versions of
the same object serialized
- Ability to resize worker pool without server restart
- Make scaling down of expiryState workers' concurrency safe; Thanks
@klauspost
- Add error logs when expiryState and transition state are not
initialized (yet)
* metrics: Add missed tier journal entry tasks
* Initialize the ILM worker pool after the object layer
With this commit, MinIO generates root credentials automatically
and deterministically if:
- No root credentials have been set.
- A KMS (KES) is configured.
- API access for the root credentials is disabled (lockdown mode).
Before, MinIO defaults to `minioadmin` for both the access and
secret keys. Now, MinIO generates unique root credentials
automatically on startup using the KMS.
Therefore, it uses the KMS HMAC function to generate pseudo-random
values. These values never change as long as the KMS key remains
the same, and the KMS key must continue to exist since all IAM data
is encrypted with it.
Backward compatibility:
This commit should not cause existing deployments to break. It only
changes the root credentials of deployments that have a KMS configured
(KES, not a static key) but have not set any admin credentials. Such
implementations should be rare or not exist at all.
Even if the worst case would be updating root credentials in mc
or other clients used to administer the cluster. Root credentials
are anyway not intended for regular S3 operations.
Signed-off-by: Andreas Auernhammer <github@aead.dev>
just like client-conn-read-deadline, added a new flag that does
client-conn-write-deadline as well.
Both are not configured by default, since we do not yet know
what is the right value. Allow this to be configurable if needed.
we should do this to ensure that we focus on
data healing as primary focus, fixing metadata
as part of healing must be done but making
data available is the main focus.
the main reason is metadata inconsistencies can
cause data availability issues, which must be
avoided at all cost.
will be bringing in an additional healing mechanism
that involves "metadata-only" heal, for now we do
not expect to have these checks.
continuation of #19154
Bonus: add a pro-active healthcheck to perform a connection
This change makes the label names consistent with the handler names.
This is in preparation to use reflection based API handler function
names for the api labels so they will be the same as tracing, auditing
and logging names for these API calls.
in k8s things really do come online very asynchronously,
we need to use implementation that allows this randomness.
To facilitate this move WriteAll() as part of the
websocket layer instead.
Bonus: avoid instances of dnscache usage on k8s
New disk healing code skips/expires objects that ILM supposed to expire.
Add more visibility to the user about this activity by calculating those
objects and print it at the end of healing activity.
This PR fixes a bug that perhaps has been long introduced,
with no visible workarounds. In any deployment, if an entire
erasure set is deleted, there is no way the cluster recovers.
This change is to decouple need for root credentials to match between
site replication deployments.
Also ensuring site replication config initialization is re-tried until
it succeeds, this deoendency is critical to STS flow in site replication
scenario.
Currently, we read from `/proc/diskstats` which is found to be
un-reliable in k8s environments. We can read from `sysfs` instead.
Also, cache the latest drive io stats to find the diff and update
the metrics.
* Remove lock for cached operations.
* Rename "Relax" to `ReturnLastGood`.
* Add `CacheError` to allow caching values even on errors.
* Add NoWait that will return current value with async fetching if within 2xTTL.
* Make benchmark somewhat representative.
```
Before: BenchmarkCache-12 16408370 63.12 ns/op 0 B/op
After: BenchmarkCache-12 428282187 2.789 ns/op 0 B/op
```
* Remove `storageRESTClient.scanning`. Nonsensical - RPC clients will not have any idea about scanning.
* Always fetch remote diskinfo metrics and cache them. Seems most calls are requesting metrics.
* Do async fetching of usage caches.
It also fixes a long-standing bug in expiring transitioned objects.
The expiration action was deleting the current version in the case'
of tiered objects instead of adding a delete marker.
only enable md5sum if explicitly asked by the client, otherwise
its not necessary to compute md5sum when SSE-KMS/SSE-C is enabled.
this is continuation of #17958
data-dir not being present is okay, however we can still
rely on the `rename()` atomic call instead of relying on
write xl.meta write which may truncate the io.EOF.
Add a new function logger.Event() to send the log to Console and
http/kafka log webhooks. This will include some internal events such as
disk healing and rebalance/decommissioning
the PR in #16541 was incorrect and hand wrong assumptions
about the overall setup, revert this since this expectation
to have offline servers is wrong and we can end up with a
bigger chicken and egg problem.
This reverts commit 5996c8c4d5.
Bonus:
- preserve disk in globalLocalDrives properly upon connectDisks()
- do not return 'nil' from newXLStorage(), getting it ready for
the next set of changes for 'format.json' loading.
The previous logic of calculating per second values for disk io stats
divides the stats by the host uptime. This doesn't work in k8s
environment as the uptime is of the pod, but the stats (from
/proc/diskstats) are from the host.
Fix this by storing the initial values of uptime and the stats at the
timme of server startup, and using the difference between current and
initial values when calculating the per second values.
globalLocalDrives seem to be not updated during the
HealFormat() leads to a requirement where the server
needs to be restarted for the healing to continue.
a/prefix
a/prefix/1.txt
where `a/prefix` is an object which does not have `/` at the end,
we do not have to aggressively recursively delete all the sub-folders
as well. Instead convert the call into self contained to deleting
'xl.meta' and then subsequently attempting to Remove the parent.
Bonus: enable audit alerts for object versions
beyond the configured value, default is '100'
versions per object beyond which scanner will
alert for each such objects.
when we expand via pools, there is no reason to stick
with the same distributionAlgo as the rest. Since the
algo only makes sense with-in a pool not across pools.
This allows for newer pools to use newer codepaths to
avoid legacy file lookups when they have a pre-existing
deployment from 2019, they can expand their new pool
to be of a newer distribution format, allowing the
pool to be more performant.
- bucket metadata does not need to look for legacy things
anymore if b.Created is non-zero
- stagger bucket metadata loads across lots of nodes to
avoid the current thundering herd problem.
- Remove deadlines for RenameData, RenameFile - these
calls should not ever be timed out and should wait
until completion or wait for client timeout. Do not
choose timeouts for applications during the WRITE phase.
- increase R/W buffer size, increase maxMergeMessages to 30
Depending on when the context cancelation is picked up the handler may return and close the channel before `SubscribeJSON` returns, causing:
```
Feb 05 17:12:00 s3-us-node11 minio[3973657]: panic: send on closed channel
Feb 05 17:12:00 s3-us-node11 minio[3973657]: goroutine 378007076 [running]:
Feb 05 17:12:00 s3-us-node11 minio[3973657]: github.com/minio/minio/internal/pubsub.(*PubSub[...]).SubscribeJSON.func1()
Feb 05 17:12:00 s3-us-node11 minio[3973657]: github.com/minio/minio/internal/pubsub/pubsub.go:139 +0x12d
Feb 05 17:12:00 s3-us-node11 minio[3973657]: created by github.com/minio/minio/internal/pubsub.(*PubSub[...]).SubscribeJSON in goroutine 378010884
Feb 05 17:12:00 s3-us-node11 minio[3973657]: github.com/minio/minio/internal/pubsub/pubsub.go:124 +0x352
```
Wait explicitly for the goroutine to exit.
Bonus: Listen for doneCh when sending to not risk getting blocked there is channel isn't being emptied.
this fixes rare bugs we have seen but never really found a
reproducer for
- PutObjectRetention() returning 503s
- PutObjectTags() returning 503s
- PutObjectMetadata() updates during replication returning 503s
These calls return errors, and this perpetuates with
no apparent fix.
This PR fixes with correct quorum requirement.
To force limit the duration of STS accounts, the user can create a new
policy, like the following:
{
"Version": "2012-10-17",
"Statement": [{
"Effect": "Allow",
"Action": ["sts:AssumeRoleWithWebIdentity"],
"Condition": {"NumericLessThanEquals": {"sts:DurationSeconds": "300"}}
}]
}
And force binding the policy to all OpenID users, whether using a claim name or role
ARN.
disk tokens usage is not necessary anymore with the implementation
of deadlines for storage calls and active monitoring of the drive
for I/O timeouts.
Functionality kicking off a bad drive is still supported, it's just that
we do not have to serialize I/O in the manner tokens would do.
Interpret `null` inline policy for access keys as inheriting parent
policy. Since MinIO Console currently sends this value, we need to honor it
for now. A larger fix in Console and in the server are required.
Fixes#18939.
Allow internal types to support a `Recycler` interface, which will allow for sharing of common types across handlers.
This means that all `grid.MSS` (and similar) objects are shared across in a common pool instead of a per-handler pool.
Add internal request reuse of internal types. Add for safe (pointerless) types explicitly.
Only log params for internal types. Doing Sprint(obj) is just a bit too messy.
With this change, only a user with `UpdateServiceAccountAdminAction`
permission is able to edit access keys.
We would like to let a user edit their own access keys, however the
feature needs to be re-designed for better security and integration with
external systems like AD/LDAP and OpenID.
This change prevents privilege escalation via service accounts.
for actionable, inspections we have `mc support inspect`
we do not need double logging, healing will report relevant
errors if any, in terms of quorum lost etc.
Each Put, List, Multipart operations heavily rely on making
GetBucketInfo() call to verify if bucket exists or not on
a regular basis. This has a large performance cost when there
are tons of servers involved.
We did optimize this part by vectorizing the bucket calls,
however its not enough, beyond 100 nodes and this becomes
fairly visible in terms of performance.
- healing must not set the write xattr
because that is the job of active healing
to update. what we need to preserve is
permanent deletes.
- remove older env for drive monitoring and
enable it accordingly, as a global value.
local disk metrics were polluting cluster metrics
Please remove them instead of adding relevant ones.
- batch job metrics were incorrectly kept at bucket
metrics endpoint, move it to cluster metrics.
- add tier metrics to cluster peer metrics from the node.
- fix missing set level cluster health metrics
it is entirely possible that a rebalance process which was running
when it was asked to "stop" it failed to write its last statistics
to the disk.
After this a pool expansion can cause disruption and all S3 API
calls would fail at IsPoolRebalancing() function.
This PRs makes sure that we update rebalance.bin under such
conditions to avoid any runtime crashes.
add new update v2 that updates per node, allows idempotent behavior
new API ensures that
- binary is correct and can be downloaded checksummed verified
- committed to actual path
- restart returns back the relevant waiting drives
do not need to be defensive in our approach,
we should simply override anything everything
in import process, do not care about what
currently exists on the disk - backup is the
source of truth.
Right now the format.json is excluded if anything within `.minio.sys` is requested.
I assume the check was meant to exclude only if it was actually requesting it.
- Move RenameFile to websockets
- Move ReadAll that is primarily is used
for reading 'format.json' to to websockets
- Optimize DiskInfo calls, and provide a way
to make a NoOp DiskInfo call.
AlmosAll uses of NewDeadlineWorker, which relied on secondary values, were used in a racy fashion,
which could lead to inconsistent errors/data being returned. It also propagates the deadline downstream.
Rewrite all these to use a generic WithDeadline caller that can return an error alongside a value.
Remove the stateful aspect of DeadlineWorker - it was racy if used - but it wasn't AFAICT.
Fixes races like:
```
WARNING: DATA RACE
Read at 0x00c130b29d10 by goroutine 470237:
github.com/minio/minio/cmd.(*xlStorageDiskIDCheck).ReadVersion()
github.com/minio/minio/cmd/xl-storage-disk-id-check.go:702 +0x611
github.com/minio/minio/cmd.readFileInfo()
github.com/minio/minio/cmd/erasure-metadata-utils.go:160 +0x122
github.com/minio/minio/cmd.erasureObjects.getObjectFileInfo.func1.1()
github.com/minio/minio/cmd/erasure-object.go:809 +0x27a
github.com/minio/minio/cmd.erasureObjects.getObjectFileInfo.func1.2()
github.com/minio/minio/cmd/erasure-object.go:828 +0x61
Previous write at 0x00c130b29d10 by goroutine 470298:
github.com/minio/minio/cmd.(*xlStorageDiskIDCheck).ReadVersion.func1()
github.com/minio/minio/cmd/xl-storage-disk-id-check.go:698 +0x244
github.com/minio/minio/internal/ioutil.(*DeadlineWorker).Run.func1()
github.com/minio/minio/internal/ioutil/ioutil.go:141 +0x33
WARNING: DATA RACE
Write at 0x00c0ba6e6c00 by goroutine 94507:
github.com/minio/minio/cmd.(*xlStorageDiskIDCheck).StatVol.func1()
github.com/minio/minio/cmd/xl-storage-disk-id-check.go:419 +0x104
github.com/minio/minio/internal/ioutil.(*DeadlineWorker).Run.func1()
github.com/minio/minio/internal/ioutil/ioutil.go:141 +0x33
Previous read at 0x00c0ba6e6c00 by goroutine 94463:
github.com/minio/minio/cmd.(*xlStorageDiskIDCheck).StatVol()
github.com/minio/minio/cmd/xl-storage-disk-id-check.go:422 +0x47e
github.com/minio/minio/cmd.getBucketInfoLocal.func1()
github.com/minio/minio/cmd/peer-s3-server.go:275 +0x122
github.com/minio/pkg/v2/sync/errgroup.(*Group).Go.func1()
```
Probably back from #17701
protection was in place. However, it covered only some
areas, so we re-arranged the code to ensure we could hold
locks properly.
Along with this, remove the DataShardFix code altogether,
in deployments with many drive replacements, this can affect
and lead to quorum loss.
Also limit the amount of concurrency when sending
binary updates to peers, avoid high network over
TX that can cause disconnection events for the
node sending updates.
If site replication is enabled, we should still show the size and
version distribution histogram metrics at bucket level.
Signed-off-by: Shubhendu Ram Tripathi <shubhendu@minio.io>
New API now verifies any hung disks before restart/stop,
provides a 'per node' break down of the restart/stop results.
Provides also how many blocked syscalls are present on the
drives and what users must do about them.
Adds options to do pre-flight checks to provide information
to the user regarding any hung disks. Provides 'force' option
to forcibly attempt a restart() even with waiting syscalls
on the drives.
On a policy detach operation, if there are no policies remaining
attached to the user/group, remove the policy mapping file, instead of
leaving a file containing an empty list of policies.
Healing dangling buckets is conservative, and it is a typical use case to
fail to remove a dangling bucket because it contains some data because
healing danging bucket code is not allowed to remove data: only healing
the dangling object is allowed to do so.
reference format is constant for any lifetime of
a minio cluster, we do not have to ever replace
it during HealFormat() as it will never change.
additionally we should simply reject reference
formats that we do not understand early on.
Poorna
Anis Eleuch
Praveen raj Mani
Shireesh Anjal
Harshavardhana
Aditya Manthramurthy
Ramon de Klein
jiuker
Bala FA
Seiya
Klaus Post
Krishnan Parthasarathi
Robert Lützner
Sveinn
Allan Roger Reid
Shubhendu
Minio Trusted
Taran Pelkey
Andreas Auernhammer
Kaan Kabalak
alingse
Dennis Marttinen
huajin tong
Justin Griffin
Taran Pelkey
Frank Wessels
chienguo