Previously, we checked if we had a quorum on the DataDir value.
We are removing this check, which allows reading objects with different
DataDir values in a few drives (due to a rebalance-stop race bug)
provided their eTags or ModTimes match.
- optimize writing part.N.meta by writing both part.N
and its meta in sequence without network component.
- remove part.N.meta, part.N which were partially success
ful, in quorum loss situations during renamePart()
- allow for strict read quorum check arbitrated via ETag
for the given part number, this makes it double safer
upon final commit.
- return an appropriate error when read quorum is missing,
instead of returning InvalidPart{}, which is non-retryable
error. This kind of situation can happen when many
nodes are going offline in rotation, an example of such
a restart() behavior is statefulset updates in k8s.
fixes#20091
For a non-tiered object, MinIO requires that EcM (# of data blocks) of
xl.meta agree, corresponding to the number of data blocks needed to
read this object.
OTOH, tiered objects have metadata in the hot tier and data in the
warm tier. The data and its integrity are offloaded to the warm tier. This
allows us to reduce the read quorum from EcM (typically > N/2, where N -
erasure stripe width) to N/2 + 1. The simple majority of metadata
ensures consensus on what the object is and where it is
located.
This change uses the updated ldap library in minio/pkg (bumped
up to v3). A new config parameter is added for LDAP configuration to
specify extra user attributes to load from the LDAP server and to store
them as additional claims for the user.
A test is added in sts_handlers.go that shows how to access the LDAP
attributes as a claim.
This is in preparation for adding SSH pubkey authentication to MinIO's SFTP
integration.
- handle errFileCorrupt properly
- micro-optimization of sending done() response quicker
to close the goroutine.
- fix logger.Event() usage in a couple of places
- handle the rest of the client to return a different error other than
lastErr() when the client is closed.
Since the object is being permanently deleted, the lack of read quorum should not
matter as long as sufficient disks are online to complete the deletion with parity
requirements.
If several pools have the same object with insufficient read quorum, attempt to
delete object from all the pools where it exists
Create new code paths for multiple subsystems in the code. This will
make maintaing this easier later.
Also introduce bugLogIf() for errors that should not happen in the first
place.
Currently, the code relies on object parity to decide whether it is a
delete marker or a regular object. In the case of a delete marker, the
return quorum is half of the disks in the erasure set. However, this
calculation must be corrected with objects with EC = 0, mainly
because EC is not a one-time fixed configuration.
Though all data are correct, the manifested symptom is a 503 with an
EC=0 object. This bug was manifested after we introduced the
fast Get Object feature that does not read all data from all disks in
case of inlined objects
- Use a shared worker pool for all ILM expiry tasks
- Free version cleanup executes in a separate goroutine
- Add a free version only if removing the remote object fails
- Add ILM expiry metrics to the node namespace
- Move tier journal tasks to expiryState
- Remove unused on-disk journal for tiered objects pending deletion
- Distribute expiry tasks across workers such that the expiry of versions of
the same object serialized
- Ability to resize worker pool without server restart
- Make scaling down of expiryState workers' concurrency safe; Thanks
@klauspost
- Add error logs when expiryState and transition state are not
initialized (yet)
* metrics: Add missed tier journal entry tasks
* Initialize the ILM worker pool after the object layer
we should do this to ensure that we focus on
data healing as primary focus, fixing metadata
as part of healing must be done but making
data available is the main focus.
the main reason is metadata inconsistencies can
cause data availability issues, which must be
avoided at all cost.
will be bringing in an additional healing mechanism
that involves "metadata-only" heal, for now we do
not expect to have these checks.
continuation of #19154
Bonus: add a pro-active healthcheck to perform a connection
Each Put, List, Multipart operations heavily rely on making
GetBucketInfo() call to verify if bucket exists or not on
a regular basis. This has a large performance cost when there
are tons of servers involved.
We did optimize this part by vectorizing the bucket calls,
however its not enough, beyond 100 nodes and this becomes
fairly visible in terms of performance.
protection was in place. However, it covered only some
areas, so we re-arranged the code to ensure we could hold
locks properly.
Along with this, remove the DataShardFix code altogether,
in deployments with many drive replacements, this can affect
and lead to quorum loss.
GetActualSize() was heavily relying on o.Parts()
to be non-empty to figure out if the object is multipart or not,
However, we have many indicators of whether an object is multipart
or not.
Blindly assuming that o.Parts == nil is not a multipart, is an
incorrect expectation instead, multipart must be obtained via
- Stored metadata value indicating this is a multipart encrypted object.
- Rely on <meta>-actual-size metadata to get the object's actual size.
This value is preserved for additional reasons such as these.
- ETag != 32 length
Optionally allows customers to enable
- Enable an external cache to catch GET/HEAD responses
- Enable skipping disks that are slow to respond in GET/HEAD
when we have already achieved a quorum
- this PR avoids sending a large ChecksumInfo slice
when its not needed
- also for a file with XLV2 format there is no reason
to allocate Checksum slice while reading
replicationTimestamp might differ if there were retries
in replication and the retried attempt overwrote in
quorum but enough shards with newer timestamp causing
the existing timestamps on xl.meta to be invalid, we
do not rely on this value for anything external.
this is purely a hint for debugging purposes, but there
is no real value in it considering the object itself
is in-tact we do not have to spend time healing this
situation.
we may consider healing this situation in future but
that needs to be decoupled to make sure that we do not
over calculate how much we have to heal.
This reverts commit bf3901342c.
This is to fix a regression caused when there are inconsistent
versions, but one version is in quorum. SuccessorModTime issue
must be fixed differently.
on unversioned buckets its possible that 0-byte objects
might lose quorum on flaky systems, allow them to be same
as DELETE markers. Since practically speak they have no
content.
on "unversioned" buckets there are situations
when successive concurrent I/O can lead to
an inconsistent state() with mtime while the
etag might be the same for the object on disk.
in such a scenario it is possible for us to
allow reading of the object since etag matches
and if etag matches we are guaranteed that we
have enough copies the object will be readable
and same.
This PR allows fallback in such scenarios.
We need to make sure if we cannot read bucket metadata
for some reason, and bucket metadata is not missing and
returning corrupted information we should panic such
handlers to disallow I/O to protect the overall state
on the system.
In-case of such corruption we have a mechanism now
to force recreate the metadata on the bucket, using
`x-minio-force-create` header with `PUT /bucket` API
call.
Additionally fix the versioning config updated state
to be set properly for the site replication healing
to trigger correctly.
Main motivation is move towards a common backend format
for all different types of modes in MinIO, allowing for
a simpler code and predictable behavior across all features.
This PR also brings features such as versioning, replication,
transitioning to single drive setups.
It would seem like the PR #11623 had chewed more
than it wanted to, non-fips build shouldn't really
be forced to use slower crypto/sha256 even for
presumed "non-performance" codepaths. In MinIO
there are really no "non-performance" codepaths.
This assumption seems to have had an adverse
effect in certain areas of CPU usage.
This PR ensures that we stick to sha256-simd
on all non-FIPS builds, our most common build
to ensure we get the best out of the CPU at
any given point in time.
* Do not use inline data size in xl.meta quorum calculation
Data shards of one object can different inline/not-inline decision
in multiple disks. This happens with outdated disks when inline
decision changes. For example, enabling bucket versioning configuration
will change the small file threshold.
When the parity of an object becomes low, GET object can return 503
because it is not unable to calculate the xl.meta quorum, just because
some xl.meta has inline data and other are not.
So this commit will be disable taking the size of the inline data into
consideration when calculating the xl.meta quorum.
* Add tests for simulatenous inline/notinline object
Co-authored-by: Anis Elleuch <anis@min.io>
