We can reduce this further in the future, but this is a good
value to keep around. With the advent of continuous healing,
we can be assured that namespace will eventually be
consistent so we are okay to avoid the necessity to
a list across all drives on all sets.
Bonus Pop()'s in parallel seem to have the potential to
wait too on large drive setups and cause more slowness
instead of gaining any performance remove it for now.
Also, implement load balanced reply for local disks,
ensuring that local disks have an affinity for
- cleanupStaleMultipartUploads()
adds a feature where we can fetch the MinIO
command-line remotely, this
is primarily meant to add some stateless
nature to the MinIO deployment in k8s
environments, MinIO operator would run a
webhook service endpoint
which can be used to fetch any environment
value in a generalized approach.
with the merge of https://github.com/etcd-io/etcd/pull/11823
etcd v3.5.0 will now have a properly imported versioned path
this fixes our pending migration to newer repo
Readiness as no reasoning to be cluster scope
because that is not how the k8s networking works
for pods, all the pods to a deployment are not
sharing the network in a singleton. Instead they
are run as local scopes to themselves, with
readiness failures the pod is potentially taken
out of the network to be resolvable - this
affects the distributed setup in myriad of
different ways.
Instead readiness should behave like liveness
with local scope alone, and should be a dummy
implementation.
This PR all the startup times and overal k8s
startup time dramatically improves.
Added another handler called as `/minio/health/cluster`
to understand the cluster scope health.
The default behavior is to cache each range requested
to cache drive. Add an environment variable
`MINIO_RANGE_CACHE` - when set to off, it disables
range caching and instead downloads entire object
in the background.
Fixes#9870
This PR has the following changes
- Removing duplicate lookupConfigs() calls.
- Deprecate admin config APIs for NAS gateways. This will avoid repeated reloads of the config from the disk.
- WatchConfigNASDisk will be removed
- Migration guide for NAS gateways users to migrate to ENV settings.
NOTE: THIS PR HAS A BREAKING CHANGE
Fixes#9875
Co-authored-by: Harshavardhana <harsha@minio.io>
This PR adds a new configuration parameter which allows readiness
check to respond within 10secs, this can be reduced to a lower value
if necessary using
```
mc admin config set api ready_deadline=5s
```
or
```
export MINIO_API_READY_DEADLINE=5s
```
enable linter using golangci-lint across
codebase to run a bunch of linters together,
we shall enable new linters as we fix more
things the codebase.
This PR fixes the first stage of this
cleanup.
New value defaults to 100K events by default,
but users can tune this value upto any value
they seem necessary.
* increase the limit to maxint64 while validating
Add two new configuration entries, api.requests-max and
api.requests-deadline which have the same role of
MINIO_API_REQUESTS_MAX and MINIO_API_REQUESTS_DEADLINE.
- Introduced a function `FetchRegisteredTargets` which will return
a complete set of registered targets irrespective to their states,
if the `returnOnTargetError` flag is set to `False`
- Refactor NewTarget functions to return non-nil targets
- Refactor GetARNList() to return a complete list of configured targets
Continuing from previous PR #9304, comment
is a special key is not present in the
default KV list. Add it explicitly when
tokenizing fields as it may be possible that
some clients might try to set comments.
This PR adds context-based `k=v` splits based
on the sub-system which was obtained, if the
keys are not provided an error will be thrown
during parsing, if keys are provided with wrong
values an error will be thrown. Keys can now
have values which are of a much more complex
form such as `k="v=v"` or `k=" v = v"`
and other variations.
additionally, deprecate unnecessary postgres/mysql
configuration styles, support only
- connection_string for Postgres
- dsn_string for MySQL
All other parameters are removed.
- total number of S3 API calls per server
- maximum wait duration for any S3 API call
This implementation is primarily meant for situations
where HDDs are not capable enough to handle the incoming
workload and there is no way to throttle the client.
This feature allows MinIO server to throttle itself
such that we do not overwhelm the HDDs.
To allow better control the cache eviction process.
Introduce MINIO_CACHE_WATERMARK_LOW and
MINIO_CACHE_WATERMARK_HIGH env. variables to specify
when to stop/start cache eviction process.
Deprecate MINIO_CACHE_EXPIRY environment variable. Cache
gc sweeps at 30 minute intervals whenever high watermark is
reached to clear least recently accessed entries in the cache
until sufficient space is cleared to reach the low watermark.
Garbage collection uses an adaptive file scoring approach based
on last access time, with greater weights assigned to larger
objects and those with more hits to find the candidates for eviction.
Thanks to @klauspost for this file scoring algorithm
Co-authored-by: Klaus Post <klauspost@minio.io>
RegisterNotificationTargets() cleans up all connections
that it makes to notification targets when an error occurs
during its execution.
However there is a typo in the code that makes the function to always
try to access to a nil pointer in the defer code since the function
in question will always return nil in the case of any error.
This commit fixes the typo in the code.
A new key was added in identity_openid recently
required explicitly for client to set the optional
value without that it would be empty, handle this
appropriately.
Fixes#8787
- Stop spawning store replay routines when testing the notification targets
- Properly honor the target.Close() to clean the resources used
Fixes#8707
Co-authored-by: Harshavardhana <harsha@minio.io>
In certain organizations policy claim names
can be not just 'policy' but also things like
'roles', the value of this field might also
be *string* or *[]string* support this as well
In this PR we are still not supporting multiple
policies per STS account which will require a
more comprehensive change.
minio server /data{1..4} shows an error about inability to bind a port, though
the real problem is /data{1..4} cannot be created because of the lack of
permissions.
This commit fix the behavior.
We had messy cyclical dependency problem with `mc`
due to dependencies in pkg/console, moved the pkg/console
to minio for more control and also to avoid any further
cyclical dependencies of `mc` clobbering up the
dependencies on server.
Fixes#8659
If two distinct clusters are started with different domains
along with single common domain, this situation was leading
to conflicting buckets getting created on different clusters
To avoid this do not prematurely error out if the key has no
entries, let the caller decide on which entry matches and
which entry is valid. This allows support for MINIO_DOMAIN
with one common domain, but each cluster may have their own
domains.
Fixes#8705
The approach is that now safe mode is only invoked when
we cannot read the config or under some catastrophic
situations, but not under situations when config entries
are invalid or unreachable. This allows for maximum
availability for MinIO and not fail on our users unlike
most of our historical releases.
This commit adds support for the minio/kes KMS.
See: https://github.com/minio/kes
In particular you can configure it as KMS by:
- `export MINIO_KMS_KES_ENDPOINT=` // Server URL
- `export MINIO_KMS_KES_KEY_FILE=` // TLS client private key
- `export MINIO_KMS_KES_CERT_FILE=` // TLS client certificate
- `export MINIO_KMS_KES_CA_PATH=` // Root CAs issuing server cert
- `export MINIO_KMS_KES_KEY_NAME=` // The name of the (default)
master key
Final update to all messages across sub-systems
after final review, the only change here is that
NATS now has TLS and TLSSkipVerify to be consistent
for all other notification targets.
Currently, we use the top-level prefix "config/"
for all our IAM assets, instead of to provide
tenant-level separation bring 'path_prefix'
to namespace the access properly.
Fixes#8567
- added ability to specify CA for self-signed certificates
- added option to authenticate using client certificates
- added unit tests for nats connections
- Migrate and save only settings which are enabled
- Rename logger_http to logger_webhook and
logger_http_audit to audit_webhook
- No more pretty printing comments, comment
is a key=value pair now.
- Avoid quotes on values which do not have space in them
- `state="on"` is implicit for all SetConfigKV unless
specified explicitly as `state="off"`
- Disabled IAM users should be disabled always
This PR also fixes issues related to
- Add proper newline for `mc admin config get` output
for more than one targets
- Fixes issue of temporary user credentials to have
consistent output
- Fixes a crash when setting a key with empty values
- Fixes a parsing issue with `mc admin config history`
- Fixes gateway ENV handling for etcd server and gateway
This PR fixes issues found in config migration
- StorageClass migration error when rrs is empty
- Plain-text migration of older config
- Do not run in safe mode with incorrect credentials
- Update logger_http documentation for _STATE env
Refer more reported issues at #8434
This PR refactors object layer handling such
that upon failure in sub-system initialization
server reaches a stage of safe-mode operation
wherein only certain API operations are enabled
and available.
This allows for fixing many scenarios such as
- incorrect configuration in vault, etcd,
notification targets
- missing files, incomplete config migrations
unable to read encrypted content etc
- any other issues related to notification,
policies, lifecycle etc
This PR brings support for `history` list to
list in the following agreed format
```
~ mc admin config history list -n 2 myminio
RestoreId: df0ebb1e-69b0-4043-b9dd-ab54508f2897
Date: Mon, 04 Nov 2019 17:27:27 GMT
region name="us-east-1" state="on"
region name="us-east-1" state="on"
region name="us-east-1" state="on"
region name="us-east-1" state="on"
RestoreId: ecc6873a-0ed3-41f9-b03e-a2a1bab48b5f
Date: Mon, 04 Nov 2019 17:28:23 GMT
region name=us-east-1 state=off
```
This PR also moves the help templating and coloring to
fully `mc` side instead than `madmin` API.
- Supports migrating only when the credential ENVs are set,
so any FS mode deployments which do not have ENVs set will
continue to remain as is.
- Credential ENVs can be rotated using MINIO_ACCESS_KEY_OLD
and MINIO_SECRET_KEY_OLD envs, in such scenarios it allowed
to rotate the encrypted content to a new admin key.
- This PR allows config KVS to be validated properly
without being affected by ENV overrides, rejects
invalid values during set operation
- Expands unit tests and refactors the error handling
for notification targets, returns error instead of
ignoring targets for invalid KVS
- Does all the prep-work for implementing safe-mode
style operation for MinIO server, introduces a new
global variable to toggle safe mode based operations
NOTE: this PR itself doesn't provide safe mode operations
- adding oauth support to MinIO browser (#8400) by @kanagaraj
- supports multi-line get/set/del for all config fields
- add support for comments, allow toggle
- add extensive validation of config before saving
- support MinIO browser to support proper claims, using STS tokens
- env support for all config parameters, legacy envs are also
supported with all documentation now pointing to latest ENVs
- preserve accessKey/secretKey from FS mode setups
- add history support implements three APIs
- ClearHistory
- RestoreHistory
- ListHistory
- add help command support for each config parameters
- all the bug fixes after migration to KV, and other bug
fixes encountered during testing.
This change is related to larger config migration PR
change, this is a first stage change to move our
configs to `cmd/config/` - divided into its subsystems
Harshavardhana
Praveen raj Mani
Anis Elleuch
poornas
Krishna Srinivas
remche
Taras Parkhomenko
ebozduman
Stephen N
Nitish Tiwari
Klaus Post
Andreas Auernhammer
Aleksandr Petruhin
svistoi
Ville Skyttä
Kanagaraj M