lockers currently might leave stale lockers,
in unknown ways waiting for downed lockers.
locker check interval is high enough to safely
cleanup stale locks.
This change tracks bandwidth for a bucket and object
- [x] Add Admin API
- [x] Add Peer API
- [x] Add BW throttling
- [x] Admin APIs to set replication limit
- [x] Admin APIs for fetch bandwidth
In almost all scenarios MinIO now is
mostly ready for all sub-systems
independently, safe-mode is not useful
anymore and do not serve its original
intended purpose.
allow server to be fully functional
even with config partially configured,
this is to cater for availability of actual
I/O v/s manually fixing the server.
In k8s like environments it will never make
sense to take pod into safe-mode state,
because there is no real access to perform
any remote operation on them.
- select lockers which are non-local and online to have
affinity towards remote servers for lock contention
- optimize lock retry interval to avoid sending too many
messages during lock contention, reduces average CPU
usage as well
- if bucket is not set, when deleteObject fails make sure
setPutObjHeaders() honors lifecycle only if bucket name
is set.
- fix top locks to list out always the oldest lockers always,
avoid getting bogged down into map's unordered nature.
add a hint on the disk to allow for tracking fresh disk
being healed, to allow for restartable heals, and also
use this as a way to track and remove disks.
There are more pending changes where we should move
all the disk formatting logic to backend drives, this
PR doesn't deal with this refactor instead makes it
easier to track healing in the future.
- Add owner information for expiry, locking, unlocking a resource
- TopLocks returns now locks in quorum by default, provides
a way to capture stale locks as well with `?stale=true`
- Simplify the quorum handling for locks to avoid from storage
class, because there were challenges to make it consistent
across all situations.
- And other tiny simplifications to reset locks.
MaxConnsPerHost can potentially hang a call without any
way to timeout, we do not need this setting for our proxy
and gateway implementations instead IdleConn settings are
good enough.
Also ensure to use NewRequestWithContext and make sure to
take the disks offline only for network errors.
Fixes#10304
This commit refactors the certificate management implementation
in the `certs` package such that multiple certificates can be
specified at the same time. Therefore, the following layout of
the `certs/` directory is expected:
```
certs/
│
├─ public.crt
├─ private.key
├─ CAs/ // CAs directory is ignored
│ │
│ ...
│
├─ example.com/
│ │
│ ├─ public.crt
│ └─ private.key
└─ foobar.org/
│
├─ public.crt
└─ private.key
...
```
However, directory names like `example.com` are just for human
readability/organization and don't have any meaning w.r.t whether
a particular certificate is served or not. This decision is made based
on the SNI sent by the client and the SAN of the certificate.
***
The `Manager` will pick a certificate based on the client trying
to establish a TLS connection. In particular, it looks at the client
hello (i.e. SNI) to determine which host the client tries to access.
If the manager can find a certificate that matches the SNI it
returns this certificate to the client.
However, the client may choose to not send an SNI or tries to access
a server directly via IP (`https://<ip>:<port>`). In this case, we
cannot use the SNI to determine which certificate to serve. However,
we also should not pick "the first" certificate that would be accepted
by the client (based on crypto. parameters - like a signature algorithm)
because it may be an internal certificate that contains internal hostnames.
We would disclose internal infrastructure details doing so.
Therefore, the `Manager` returns the "default" certificate when the
client does not specify an SNI. The default certificate the top-level
`public.crt` - i.e. `certs/public.crt`.
This approach has some consequences:
- It's the operator's responsibility to ensure that the top-level
`public.crt` does not disclose any information (i.e. hostnames)
that are not publicly visible. However, this was the case in the
past already.
- Any other `public.crt` - except for the top-level one - must not
contain any IP SAN. The reason for this restriction is that the
Manager cannot match a SNI to an IP b/c the SNI is the server host
name. The entire purpose of SNI is to indicate which host the client
tries to connect to when multiple hosts run on the same IP. So, a
client will not set the SNI to an IP.
If we would allow IP SANs in a lower-level `public.crt` a user would
expect that it is possible to connect to MinIO directly via IP address
and that the MinIO server would pick "the right" certificate. However,
the MinIO server cannot determine which certificate to serve, and
therefore always picks the "default" one. This may lead to all sorts
of confusing errors like:
"It works if I use `https:instance.minio.local` but not when I use
`https://10.0.2.1`.
These consequences/limitations should be pointed out / explained in our
docs in an appropriate way. However, the support for multiple
certificates should not have any impact on how deployment with a single
certificate function today.
Co-authored-by: Harshavardhana <harsha@minio.io>
- do not fail the healthcheck if heal status
was not obtained from one of the nodes,
if many nodes fail then report this as a
catastrophic error.
- add "x-minio-write-quorum" value to match
the write tolerance supported by server.
- admin info now states if a drive is healing
where madmin.Disk.Healing is set to true
and madmin.Disk.State is "ok"
This commit addresses a maintenance / automation problem when MinIO-KES
is deployed on bare-metal. In orchestrated env. the orchestrator (K8S)
will make sure that `n` KES servers (IPs) are available via the same DNS
name. There it is sufficient to provide just one endpoint.
If DiskInfo calls failed the information returned was used anyway
resulting in no endpoint being set.
This would make the drive be attributed to the local system since
`disk.Endpoint == disk.DrivePath` in that case.
Instead, if the call fails record the endpoint and the error only.
newDynamicTimeout should be allocated once, in-case
of temporary locks in config and IAM we should
have allocated timeout once before the `for loop`
This PR doesn't fix any issue as such, but provides
enough dynamism for the timeout as per expectation.
- admin info node offline check is now quicker
- admin info now doesn't duplicate the code
across doing the same checks for disks
- rely on StorageInfo to return appropriate errors
instead of calling locally.
- diskID checks now return proper errors when
disk not found v/s format.json missing.
- add more disk states for more clarity on the
underlying disk errors.
This commit adds a new admin API for creating master keys.
An admin client can send a POST request to:
```
/minio/admin/v3/kms/key/create?key-id=<keyID>
```
The name / ID of the new key is specified as request
query parameter `key-id=<ID>`.
Creating new master keys requires KES - it does not work with
the native Vault KMS (deprecated) nor with a static master key
(deprecated).
Further, this commit removes the `UpdateKey` method from the `KMS`
interface. This method is not needed and not used anymore.
object KMS is configured with auto-encryption,
there were issues when using docker registry -
this has been left unnoticed for a while.
This PR fixes an issue with compatibility.
Additionally also fix the continuation-token implementation
infinite loop issue which was missed as part of #9939
Also fix the heal token to be generated as a client
facing value instead of what is remembered by the
server, this allows for the server to be stateless
regarding the token's behavior.
When manual healing is triggered, one node in a cluster will
become the authority to heal. mc regularly sends new requests
to fetch the status of the ongoing healing process, but a load
balancer could land the healing request to a node that is not
doing the healing request.
This PR will redirect a request to the node based on the node
index found described as part of the client token. A similar
technique is also used to proxy ListObjectsV2 requests
by encoding this information in continuation-token
Bonus fix during versioning merge one of the PR was missing
the offline/online disk count fix from #9801 port it correctly
over to the master branch from release.
Additionally, add versionID support for MRF
Fixes#9910Fixes#9931
- Implement a new xl.json 2.0.0 format to support,
this moves the entire marshaling logic to POSIX
layer, top layer always consumes a common FileInfo
construct which simplifies the metadata reads.
- Implement list object versions
- Migrate to siphash from crchash for new deployments
for object placements.
Fixes#2111
Bonus fixes in quota enforcement to use the
new datastructure and use timedValue to cache
a value/reload automatically avoids one less
global variable.
this is a major overhaul by migrating off all
bucket metadata related configs into a single
object '.metadata.bin' this allows us for faster
bootups across 1000's of buckets and as well
as keeps the code simple enough for future
work and additions.
Additionally also fixes#9396, #9394
enable linter using golangci-lint across
codebase to run a bunch of linters together,
we shall enable new linters as we fix more
things the codebase.
This PR fixes the first stage of this
cleanup.
- elasticsearch client should rely on the SDK helpers
instead of pure HTTP calls.
- webhook shouldn't need to check for IsActive() for
all notifications, failure should be delayed.
- Remove DialHTTP as its never used properly
Fixes#9460
This PR fixes couple of behaviors with service accounts
- not need to have session token for service accounts
- service accounts can be generated by any user for themselves
implicitly, with a valid signature.
- policy input for AddNewServiceAccount API is not fully typed
allowing for validation before it is sent to the server.
- also bring in additional context for admin API errors if any
when replying back to client.
- deprecate GetServiceAccount API as we do not need to reply
back session tokens
- Introduced a function `FetchRegisteredTargets` which will return
a complete set of registered targets irrespective to their states,
if the `returnOnTargetError` flag is set to `False`
- Refactor NewTarget functions to return non-nil targets
- Refactor GetARNList() to return a complete list of configured targets
- Removes PerfInfo admin API as its not OBDInfo
- Keep the drive path without the metaBucket in OBD
global latency map.
- Remove all the unused code related to PerfInfo API
- Do not redefined global mib,gib constants use
humanize.MiByte and humanize.GiByte instead always
- Implement a graph algorithm to test network bandwidth from every
node to every other node
- Saturate any network bandwidth adaptively, accounting for slow
and fast network capacity
- Implement parallel drive OBD tests
- Implement a paging mechanism for OBD test to provide periodic updates to client
- Implement Sys, Process, Host, Mem OBD Infos
- Add conservative timeouts upto 3 minutes
for internode communication
- Add aggressive timeouts of 30 seconds
for gateway communication
Fixes#9105Fixes#8732Fixes#8881Fixes#8376Fixes#9028
This is to improve responsiveness for all
admin API operations and allowing callers
to cancel any on-going admin operations,
if they happen to be waiting too long.
- avoid setting last heal activity when starting self-healing
This can be confusing to users thinking that the self healing
cycle was already performed.
- add info about the next background healing round
Metrics used to have its own code to calculate offline disks.
StorageInfo() was avoided because it is an expensive operation
by sending calls to all nodes.
To make metrics & server info share the same code, a new
argument `local` is added to StorageInfo() so it will only
query local disks when needed.
Metrics now calls StorageInfo() as server info handler does
but with the local flag set to false.
Co-authored-by: Praveen raj Mani <praveen@minio.io>
Co-authored-by: Harshavardhana <harsha@minio.io>
This commit fixes typos in the displayed server info
w.r.t. the KMS and removes the update status.
For more information about why the update status
is removed see: PR #8943
This commit removes the `Update` functionality
from the admin API. While this is technically
a breaking change I think this will not cause
any harm because:
- The KMS admin API is not complete, yet.
At the moment only the status can be fetched.
- The `mc` integration hasn't been merged yet.
So no `mc` client could have used this API
in the past.
The `Update`/`Rewrap` status is not useful anymore.
It provided a way to migrate from one master key version
to another. However, KES does not support the concept of
key versions. Instead, key migration should be implemented
as migration from one master key to another.
Basically, the `Update` functionality has been implemented just
for Vault.
The server info handler makes a http connection to other
nodes to check if they are up but does not load the custom
CAs in ~/.minio/certs/CAs.
This commit fix it.
Co-authored-by: Harshavardhana <harsha@minio.io>
On every restart of the server, usage was being
calculated which is not useful instead wait for
sufficient time to start the crawling routine.
This PR also avoids lots of double allocations
through strings, optimizes usage of string builders
and also avoids crawling through symbolic links.
Fixes#8844
- Stop spawning store replay routines when testing the notification targets
- Properly honor the target.Close() to clean the resources used
Fixes#8707
Co-authored-by: Harshavardhana <harsha@minio.io>
In existing functionality we simply return a generic
error such as "MalformedPolicy" which indicates just
a generic string "invalid resource" which is not very
meaningful when there might be multiple types of errors
during policy parsing. This PR ensures that we send
these errors back to client to indicate the actual
error, brings in two concrete types such as
- iampolicy.Error
- policy.Error
Refer #8202
Admin data usage info API returns the following
(Only FS & XL, for now)
- Number of buckets
- Number of objects
- The total size of objects
- Objects histogram
- Bucket sizes
This PR adds support below metrics
- Cache Hit Count
- Cache Miss Count
- Data served from Cache (in Bytes)
- Bytes received from AWS S3
- Bytes sent to AWS S3
- Number of requests sent to AWS S3
Fixes#8549
This PR implements locking from a global entity into
a more localized set level entity, allowing for locks
to be held only on the resources which are writing
to a collection of disks rather than a global level.
In this process this PR also removes the top-level
limit of 32 nodes to an unlimited number of nodes. This
is a precursor change before bring in bucket expansion.
This PR refactors object layer handling such
that upon failure in sub-system initialization
server reaches a stage of safe-mode operation
wherein only certain API operations are enabled
and available.
This allows for fixing many scenarios such as
- incorrect configuration in vault, etcd,
notification targets
- missing files, incomplete config migrations
unable to read encrypted content etc
- any other issues related to notification,
policies, lifecycle etc
This PR adds code to appropriately handle versioning issues
that come up quite constantly across our API changes. Currently
we were also routing our requests wrong which sort of made it
harder to write a consistent error handling code to appropriately
reject or honor requests.
This PR potentially fixes issues
- old mc is used against new minio release which is incompatible
returns an appropriate for client action.
- any older servers talking to each other, report appropriate error
- incompatible peer servers should report error and reject the calls
with appropriate error
This commit replaces the returned error message by
the hardware info handler from `Method-Not-Allowed`
to `Bad-Request` since the current HTTP error is not
correct according to the HTTP spec.
In particular:
```
The origin server MUST generate an Allow header field
in a 405 response containing a list of the target
resource's currently supported methods.
```
From: https://tools.ietf.org/html/rfc7231#section-6.5.5
- This PR allows config KVS to be validated properly
without being affected by ENV overrides, rejects
invalid values during set operation
- Expands unit tests and refactors the error handling
for notification targets, returns error instead of
ignoring targets for invalid KVS
- Does all the prep-work for implementing safe-mode
style operation for MinIO server, introduces a new
global variable to toggle safe mode based operations
NOTE: this PR itself doesn't provide safe mode operations
- adding oauth support to MinIO browser (#8400) by @kanagaraj
- supports multi-line get/set/del for all config fields
- add support for comments, allow toggle
- add extensive validation of config before saving
- support MinIO browser to support proper claims, using STS tokens
- env support for all config parameters, legacy envs are also
supported with all documentation now pointing to latest ENVs
- preserve accessKey/secretKey from FS mode setups
- add history support implements three APIs
- ClearHistory
- RestoreHistory
- ListHistory
- add help command support for each config parameters
- all the bug fixes after migration to KV, and other bug
fixes encountered during testing.
The measures are consolidated to the following metrics
- `disk_storage_used` : Disk space used by the disk.
- `disk_storage_available`: Available disk space left on the disk.
- `disk_storage_total`: Total disk space on the disk.
- `disks_offline`: Total number of offline disks in current MinIO instance.
- `disks_total`: Total number of disks in current MinIO instance.
- `s3_requests_total`: Total number of s3 requests in current MinIO instance.
- `s3_errors_total`: Total number of errors in s3 requests in current MinIO instance.
- `s3_requests_current`: Total number of active s3 requests in current MinIO instance.
- `internode_rx_bytes_total`: Total number of internode bytes received by current MinIO server instance.
- `internode_tx_bytes_total`: Total number of bytes sent to the other nodes by current MinIO server instance.
- `s3_rx_bytes_total`: Total number of s3 bytes received by current MinIO server instance.
- `s3_tx_bytes_total`: Total number of s3 bytes sent by current MinIO server instance.
- `minio_version_info`: Current MinIO version with commit-id.
- `s3_ttfb_seconds_bucket`: Histogram that holds the latency information of the requests.
And this PR also modifies the current StorageInfo queries
- Decouples StorageInfo from ServerInfo .
- StorageInfo is enhanced to give endpoint information.
NOTE: ADMIN API VERSION IS BUMPED UP IN THIS PR
Fixes#7873
specific errors, `application` errors or `all` by default.
console logging on server by default lists all logs -
enhance admin console API to accept `type` as query parameter to
subscribe to application/minio logs.
endpoint.IsLocal will not have .Host entries so
using them to skip double entries will never work.
change the code such that we look for endpoint.Host
outside of endpoint.IsLocal logic to skip double
hosts appropriately.
Move these functions to their appropriate file.
Add LDAP based users-groups system
This change adds support to integrate an LDAP server for user
authentication. This works via a custom STS API for LDAP. Each user
accessing the MinIO who can be authenticated via LDAP receives
temporary credentials to access the MinIO server.
LDAP is enabled only over TLS.
User groups are also supported via LDAP. The administrator may
configure an LDAP search query to find the group attribute of a user -
this may correspond to any attribute in the LDAP tree (that the user
has access to view). One or more groups may be returned by such a
query.
A group is mapped to an IAM policy in the usual way, and the server
enforces a policy corresponding to all the groups and the user's own
mapped policy.
When LDAP is configured, the internal MinIO users system is disabled.
It looks like from implementation point of view fastjson
parser pool doesn't behave the same way as expected
when dealing many `xl.json` from multiple disks.
The fastjson parser pool usage ends up returning incorrect
xl.json entries for checksums, with references pointing
to older entries. This led to the subtle bug where checksum
info is duplicated from a previous xl.json read of a different
file from different disk.
This commit adds an admin API route and handler for
requesting status information about a KMS key.
Therefore, the client specifies the KMS key ID (when
empty / not set the server takes the currently configured
default key-ID) and the server tries to perform a dummy encryption,
re-wrap and decryption operation. If all three succeed we know that
the server can access the KMS and has permissions to generate, re-wrap
and decrypt data keys (policy is set correctly).
