This PR introduces two new features
- AWS STS compatible STS API named AssumeRoleWithClientGrants
```
POST /?Action=AssumeRoleWithClientGrants&Token=<jwt>
```
This API endpoint returns temporary access credentials, access
tokens signature types supported by this API
- RSA keys
- ECDSA keys
Fetches the required public key from the JWKS endpoints, provides
them as rsa or ecdsa public keys.
- External policy engine support, in this case OPA policy engine
- Credentials are stored on disks
The new call combines GetObjectInfo and GetObject, and returns an
object with a ReadCloser interface.
Also adds a number of end-to-end encryption tests at the handler
level.
* Revert "Encrypted reader wrapped in NewGetObjectReader should be closed (#6383)"
This reverts commit 53a0bbeb5b.
* Revert "Change SelectAPI to use new GetObjectNInfo API (#6373)"
This reverts commit 5b05df215a.
* Revert "Implement GetObjectNInfo object layer call (#6290)"
This reverts commit e6d740ce09.
This combines calling GetObjectInfo and GetObject while returning a
io.ReadCloser for the object's body. This allows the two operations to
be under a single lock, fixing a race between getting object info and
reading the object body.
No locks are ever left in memory, we also
have a periodic interval of clearing stale locks
anyways. The lock instrumentation was not complete
and was seldom used.
Deprecate this for now and bring it back later if
it is really needed. This also in-turn seems to improve
performance slightly.
Continuing from PR 157ed65c35
Our posix.go implementation did not handle I/O errors
properly on the disks, this led to situations where
top-level callers such as ListObjects might return early
without even verifying all the available disks.
This commit tries to address this in Kubernetes, drbd/nbd based
persistent volumes which can disconnect under load and
result in the situations with disks return I/O errors.
This commit also simplifies listing operation, listing
never returns any error. We can avoid this since we pretty
much ignore most of the errors anyways. When objects are
accessed directly we return proper errors.
Minio server was preventing itself to start when any notification
target is down and not running. The PR changes the behavior by
avoiding startup abort in that case, so the user will still
be able to access Minio server using mc admin commands after
a restart or set config commands.
This PR simplifies the code to avoid tracking
any running usage events. This PR also brings
in an upper threshold of upto 1 minute suspend
the usage function after which the usage would
proceed without waiting any longer.
disk usage crawling is not needed when a tenant
is not sharing the same disk for multiple other
tenants. This PR adds an optimization when we
see a setup uses entire disk, we simply rely on
statvfs() to give us total usage.
This PR also additionally adds low priority
scheduling for usage check routine, such that
other go-routines blocked will be automatically
unblocked and prioritized before usage.
Minio server returns 403 (access denied) for head requests to prefixes
without trailing "/", this is different from S3 behaviour. S3 returns
404 in such cases.
Fixes#6080
Better support of HEAD and listing of zero sized objects with trailing
slash (a.k.a empty directory). For that, isLeafDir function is added
to indicate if the specified object is an empty directory or not. Each
backend (xl, fs) has the responsibility to store that information.
Currently, in both of XL & FS, an empty directory is represented by
an empty directory in the backend.
isLeafDir() checks if the given path is an empty directory or not,
since dir listing is costly if the latter contains too many objects,
readDirN() is added in this PR to list only N number of entries.
In isLeadDir(), we will only list one entry to check if a directory
is empty or not.
- remove old bucket policy handling
- add new policy handling
- add new policy handling unit tests
This patch brings support to bucket policy to have more control not
limiting to anonymous. Bucket owner controls to allow/deny any rest
API.
For example server side encryption can be controlled by allowing
PUT/GET objects with encryptions including bucket owner.
- getBucketLocation
- headBucket
- deleteBucket
Should return 404 or NoSuchBucket even for invalid bucket names, invalid
bucket names are only validated during MakeBucket operation
This PR introduces ReloadFormat API call at objectlayer
to facilitate this. Previously we repurposed HealFormat
but we never ended up updating our reference format on
peers.
Fixes#5700
This PR adds disk based edge caching support for minio server.
Cache settings can be configured in config.json to take list of disk drives,
cache expiry in days and file patterns to exclude from cache or via environment
variables MINIO_CACHE_DRIVES, MINIO_CACHE_EXCLUDE and MINIO_CACHE_EXPIRY
Design assumes that Atime support is enabled and the list of cache drives is
fixed.
- Objects are cached on both GET and PUT/POST operations.
- Expiry is used as hint to evict older entries from cache, or if 80% of cache
capacity is filled.
- When object storage backend is down, GET, LIST and HEAD operations fetch
object seamlessly from cache.
Current Limitations
- Bucket policies are not cached, so anonymous operations are not supported in
offline mode.
- Objects are distributed using deterministic hashing among list of cache
drives specified.If one or more drives go offline, or cache drive
configuration is altered - performance could degrade to linear lookup.
Fixes#4026
This is a trival fix to support server level WORM. The feature comes
with an environment variable `MINIO_WORM`.
Usage:
```
$ export MINIO_WORM=on
$ minio server endpoint
```
Current code didn't implement the logic to support
decrypting encrypted multiple parts, this PR fixes
by supporting copying encrypted multipart objects.
*) Add Put/Get support of multipart in encryption
*) Add GET Range support for encryption
*) Add CopyPart encrypted support
*) Support decrypting of large single PUT object
Refactor such that metadata and etag are
combined to a single argument `srcInfo`.
This is a precursor change for #5544 making
it easier for us to provide encryption/decryption
functions.
This PR implements an object layer which
combines input erasure sets of XL layers
into a unified namespace.
This object layer extends the existing
erasure coded implementation, it is assumed
in this design that providing > 16 disks is
a static configuration as well i.e if you started
the setup with 32 disks with 4 sets 8 disks per
pack then you would need to provide 4 sets always.
Some design details and restrictions:
- Objects are distributed using consistent ordering
to a unique erasure coded layer.
- Each pack has its own dsync so locks are synchronized
properly at pack (erasure layer).
- Each pack still has a maximum of 16 disks
requirement, you can start with multiple
such sets statically.
- Static sets set of disks and cannot be
changed, there is no elastic expansion allowed.
- Static sets set of disks and cannot be
changed, there is no elastic removal allowed.
- ListObjects() across sets can be noticeably
slower since List happens on all servers,
and is merged at this sets layer.
Fixes#5465Fixes#5464Fixes#5461Fixes#5460Fixes#5459Fixes#5458Fixes#5460Fixes#5488Fixes#5489Fixes#5497Fixes#5496
- Changes related to moving admin APIs
- admin APIs now have an endpoint under /minio/admin
- admin APIs are now versioned - a new API to server the version is
added at "GET /minio/admin/version" and all API operations have the
path prefix /minio/admin/v1/<operation>
- new service stop API added
- credentials change API is moved to /minio/admin/v1/config/credential
- credentials change API and configuration get/set API now require TLS
so that credentials are protected
- all API requests now receive JSON
- heal APIs are disabled as they will be changed substantially
- Heal API changes
Heal API is now provided at a single endpoint with the ability for a
client to start a heal sequence on all the data in the server, a
single bucket, or under a prefix within a bucket.
When a heal sequence is started, the server returns a unique token
that needs to be used for subsequent 'status' requests to fetch heal
results.
On each status request from the client, the server returns heal result
records that it has accumulated since the previous status request. The
server accumulates upto 1000 records and pauses healing further
objects until the client requests for status. If the client does not
request any further records for a long time, the server aborts the
heal sequence automatically.
A heal result record is returned for each entity healed on the server,
such as system metadata, object metadata, buckets and objects, and has
information about the before and after states on each disk.
A client may request to force restart a heal sequence - this causes
the running heal sequence to be aborted at the next safe spot and
starts a new heal sequence.
Under any concurrent removeObjects in progress
might have removed the parents of the same prefix
for which there is an ongoing putObject request.
An inconsistent situation may arise as explained
below even under sufficient locking.
PutObject is almost successful at the last stage when
a temporary file is renamed to its actual namespace
at `a/b/c/object1`. Concurrently a RemoveObject is
also in progress at the same prefix for an `a/b/c/object2`.
To create the object1 at location `a/b/c` PutObject has
to create all the parents recursively.
```
a/b/c - os.MkdirAll loops through has now created
'a/' and 'b/' about to create 'c/'
a/b/c/object2 - at this point 'c/' and 'object2'
are deleted about to delete b/
```
Now for os.MkdirAll loop the expected situation is
that top level parent 'a/b/' exists which it created
, such that it can create 'c/' - since removeObject
and putObject do not compete for lock due to holding
locks at different resources. removeObject proceeds
to delete parent 'b/' since 'c/' is not yet present,
once deleted 'os.MkdirAll' would receive an error as
syscall.ENOENT which would fail the putObject request.
This PR tries to address this issue by implementing
a safer/guarded approach where we would retry an operation
such as `os.MkdirAll` and `os.Rename` if both operations
observe syscall.ENOENT.
Fixes#5254
Apache Spark sends getObject requests with trailing "/".
This PR updates the getObjectInfo to stat for files
even if they are sent with trailing "/".
Fixes#2965
Verify() was being called by caller after the data
has been successfully read after io.EOF. This disconnection
opens a race under concurrent access to such an object.
Verification is not necessary outside of Read() call,
we can simply just do checksum verification right inside
Read() call at io.EOF.
This approach simplifies the usage.
Every so often we get requirements for creating
directories/prefixes and we end up rejecting
such requirements. This PR implements this and
allows empty directories without any new file
addition to backend.
Existing lower APIs themselves are leveraged to provide
this behavior. Only FS backend supports this for
the time being as desired.
Amazon S3 API expects all incoming stream has a content-length
set it was superflous for us to support object layer which supports
unknown sized stream as well, this PR removes such requirements
and explicitly error out if input stream is less than zero.
It can happen that an incoming PutObject() request might
have inputs of following form eg:-
- bucketName is 'testbucket'
- objectName is '/'
bucketName exists and was previously created but there
are no other objects in this bucket. In a situation like
this parentDirIsObject() goes into an infinite loop.
Verifying that if '/' is an object fails on both backends
but the resulting `path.Dir('/')` returns `'/'` this causes
the closure to loop onto itself.
Fixes#4940
This change refactor the ObjectLayer PutObject and PutObjectPart
functions. Instead of passing an io.Reader and a size to PUT operations
ObejectLayer expects an HashReader.
A HashReader verifies the MD5 sum (and SHA256 sum if required) of the object.
This change updates all all PutObject(Part) calls and removes unnecessary code
in all ObjectLayer implementations.
Fixes#4923
Current code was just using io.ReadAll() on an fd()
which might have moved underneath due to a concurrent
read operation. Subsequent read will result in EOF
We should always seek back and read again. pread()
is allowed on all platforms use io.SectionReader to
read from the beginning of the file.
Fixes#4842
Since go1.8 os.RemoveAll and os.MkdirAll both support long
path names i.e UNC path on windows. The code we are carrying
was directly borrowed from `pkg/os` package and doesn't need
to be in our repo anymore. As a side affect this also
addresses our codecoverage issue.
Refer #4658
Under the call flow
```
Readdir
+
|
|
| path-entry
|
|
v
StatDir
```
Existing code was written in a manner where say
a bucket/top-level directory was indeed deleted
between Readdir() and before StatDir() we would
ignore certain errors. This is not a plausible
situation and might not happen in almost all
practical cases. We do not have to look for
or interpret these errors returned by StatDir()
instead we can just collect the successful
values and return back to the client. We do not
need to pre-maturely decide on bucket access
we just let filesystem decide subsequently for
real I/O operations.
Refer #4658
Looks like if we follow pattern such as
```
_ = rlk
```
Go can potentially kick in GC and close the fd when
the reference is lost, only speculation is that
the cause here is `SetFinalizer` which is set on
`os.close()` internally in `os` stdlib.
This is unexpected and unsual endeavour for Go, but
we have to make sure the reference is never lost
and always dies with the server.
Fixes#4530
This patch also reverts previous changes which were
merged for migration to the newer disk format. We will
be bringing these changes in subsequent releases. But
we wish to add protection in this release such that
future release migrations are protected.
Revert "fs: Migration should handle bucketConfigs as regular objects. (#4482)"
This reverts commit 976870a391.
Revert "fs: Migrate object metadata to objects directory. (#4195)"
This reverts commit 76f4f20609.
Current code failed to anticipate the existence of files
which could have been created to corrupt the namespace such
as `policy.json` file created at the bucket top level.
In the current release creating such as file conflicts
with the namespace for future bucket policy operations.
We implemented migration of backend format to avoid situations
such as these.
This PR handles this situation, makes sure that the
erroneous files should have been moved properly.
Fixes#4478
Currently even when bucket doesn't exist we wrongly
return success, when an object is a directory prefix with
'/' as suffix and is of size 0.
This PR fixes this behavior.
This PR also does backend format change to 1.0.1
from 1.0.0. Backward compatible changes are still
kept to read the 'md5Sum' key. But all new objects
will be stored with the same details under 'etag'.
Fixes#4312
This change adopts the upstream fix in this regard at
https://go-review.googlesource.com/#/c/41834/ for Minio's
purposes.
Go's current os.Stat() lacks support for lot of strange
windows files such as
- share symlinks on SMB2
- symlinks on docker nanoserver
- de-duplicated files on NTFS de-duplicated volume.
This PR attempts to incorporate the change mentioned here
https://blogs.msdn.microsoft.com/oldnewthing/20100212-00/?p=14963/
The article suggests to use Windows I/O manager to
dereference the symbolic link.
Fixes#4122
This is to comply with S3 behavior, we previously removed
reading `fs.json` for optimization reasons but we have a
reason to believe that providing ETag and using gjson
provides needed benefit of not having to deal with
unmarshalling overhead of golang stdlib.
Fixes#4028
`disksUnavailable` healStatus constant indicates that a given object
needs healing but one or more of disks requiring heal are offline. This
can be used by admin heal API consumers to distinguish between a
successful heal and a no-op since the outdated disks were offline.
HEAD Object for FS and XL was returning invalid object name when
an object name has a trailing slash separator, this PR changes the
behavior and will always return 404 object not found, this guarantees
a better compatibility with S3 spec.
* fs: Rename tempObjPath variable in fsCreateFile()
* fs/posix: Factor checkDiskFree() function
* fs: Add disk free check in fsCreateFile()
* posix: Move free disk check to createFile()
* xl: Relax free disk check in POSIX initialization
* fs: checkDiskFree checks for space to store data
This PR is for readability cleanup
- getOrderedDisks as shuffleDisks
- getOrderedPartsMetadata as shufflePartsMetadata
Distribution is now a second argument instead being the
primary input argument for brevity.
Also change the usage of type casted int64(0), instead
rely on direct type reference as `var variable int64` everywhere.
Make sure to skip reserved bucket names in `ListBuckets()`
current code didn't skip this properly and also generalize
this behavior for both XL and FS.
This is a consolidation effort, avoiding usage
of naked strings in codebase. Whenever possible
use constants which can be repurposed elsewhere.
This also fixes `goconst ./...` reported issues.
This is written so that to simplify our handler code
and provide a way to only update metadata instead of
the data when source and destination in CopyObject
request are same.
Fixes#3316
ObjectLayer GetObject() now returns the entire object
if starting offset is 0 and length is negative. This
also allows to simplify handler layer code where
we always had to use GetObjectInfo() before proceeding
to read bucket metadata files examples `policy.json`.
This also reduces one additional call overhead.
This is implemented so that the issues like in the
following flow don't affect the behavior of operation.
```
GetObjectInfo()
.... --> Time window for mutation (no lock held)
.... --> Time window for mutation (no lock held)
GetObject()
```
This happens when two simultaneous uploads are made
to the same object the object has returned wrong
info to the client.
Another classic example is "CopyObject" API itself
which reads from a source object and copies to
destination object.
Fixes#3370Fixes#2912
Current code always appends to a file only if 1byte or
more was sent on the wire was affecting both PutObject
and PutObjectPart uploads.
This patch fixes such a situation and resolves#3385
Ref #3229
After review with @abperiasamy we decided to remove all the unnecessary options
- MINIO_BROWSER (Implemented as a security feature but now deemed obsolete
since even if blocking access to MINIO_BROWSER, s3 API port is open)
- MINIO_CACHE_EXPIRY (Defaults to 72h)
- MINIO_MAXCONN (No one used this option and we don't test this)
- MINIO_ENABLE_FSMETA (Enable FSMETA all the time)
Remove --ignore-disks option - this option was implemented when XL layer
would initialize the backend disks and heal them automatically to disallow
XL accidentally using the root partition itself this option was introduced.
This behavior has been changed XL no longer automatically initializes
`format.json` a HEAL is controlled activity, so ignore-disks is not
useful anymore. This change also addresses the problems of our documentation
going forward and keeps things simple. This patch brings in reduction of
options and defaulting them to a valid known inputs. This patch also
serves as a guideline of limiting many ways to do the same thing.
- abstract out instrumentation information.
- use separate lockInstance type that encapsulates the nsMutex, volume,
path and opsID as the frontend or top-level lock object.
In a distributed setup that the server should not perform any operation
on the storage layer after it is exported via RPC. e.g, cleaning up of
temporary directories under .minio.sys/tmp may interfere with ongoing
PUT objects being served by the distributed setup.
* Refactor streaming signatureV4 w/ state machine
- Used state machine to make transitions between reading chunk header,
chunk data and trailer explicit.
* debug: add print/panic statements to gather more info on CI failure
* Persist lastChunk status between Read() on ChunkReader
... remove panic() which was added as interim aid for debugging.
* Add unit-tests to cover v4 streaming signature
These messages based on our prep stage during XL
and prints more informative message regarding
drive information.
This change also does a much needed refactoring.
- Fix distributed branch to be able to run FS version.
- Fix distributed branch to be able to run XL local disks.
- Ignore initialization failures of notification and bucket
policies, the codepath should load whatever is possible.
From the S3 layer after PutObject we were calling GetObjectInfo for bucket notification. This can
be avoided if PutObjectInfo returns ObjectInfo.
fixes#2567
