disk tokens usage is not necessary anymore with the implementation
of deadlines for storage calls and active monitoring of the drive
for I/O timeouts.
Functionality kicking off a bad drive is still supported, it's just that
we do not have to serialize I/O in the manner tokens would do.
Recycle would always be called on the dummy value `any(newRT())` instead of the actual value given to the recycle function.
Caught by race tests, but mostly harmless, except for reduced perf.
Other minor cleanups. Introduced in #18940 (unreleased)
Allow internal types to support a `Recycler` interface, which will allow for sharing of common types across handlers.
This means that all `grid.MSS` (and similar) objects are shared across in a common pool instead of a per-handler pool.
Add internal request reuse of internal types. Add for safe (pointerless) types explicitly.
Only log params for internal types. Doing Sprint(obj) is just a bit too messy.
Do not rely on `connChange` to do reconnects.
Instead, you can block while the connection is running and reconnect
when handleMessages returns.
Add fully async monitoring instead of monitoring on the main goroutine
and keep this to avoid full network lockup.
- Move RenameFile to websockets
- Move ReadAll that is primarily is used
for reading 'format.json' to to websockets
- Optimize DiskInfo calls, and provide a way
to make a NoOp DiskInfo call.
Add separate reconnection mutex
Give more safety around reconnects and make sure a state change isn't missed.
Tested with several runs of `λ go test -race -v -count=500`
Adds separate mutex and doesn't mix in the testing mutex.
AlmosAll uses of NewDeadlineWorker, which relied on secondary values, were used in a racy fashion,
which could lead to inconsistent errors/data being returned. It also propagates the deadline downstream.
Rewrite all these to use a generic WithDeadline caller that can return an error alongside a value.
Remove the stateful aspect of DeadlineWorker - it was racy if used - but it wasn't AFAICT.
Fixes races like:
```
WARNING: DATA RACE
Read at 0x00c130b29d10 by goroutine 470237:
github.com/minio/minio/cmd.(*xlStorageDiskIDCheck).ReadVersion()
github.com/minio/minio/cmd/xl-storage-disk-id-check.go:702 +0x611
github.com/minio/minio/cmd.readFileInfo()
github.com/minio/minio/cmd/erasure-metadata-utils.go:160 +0x122
github.com/minio/minio/cmd.erasureObjects.getObjectFileInfo.func1.1()
github.com/minio/minio/cmd/erasure-object.go:809 +0x27a
github.com/minio/minio/cmd.erasureObjects.getObjectFileInfo.func1.2()
github.com/minio/minio/cmd/erasure-object.go:828 +0x61
Previous write at 0x00c130b29d10 by goroutine 470298:
github.com/minio/minio/cmd.(*xlStorageDiskIDCheck).ReadVersion.func1()
github.com/minio/minio/cmd/xl-storage-disk-id-check.go:698 +0x244
github.com/minio/minio/internal/ioutil.(*DeadlineWorker).Run.func1()
github.com/minio/minio/internal/ioutil/ioutil.go:141 +0x33
WARNING: DATA RACE
Write at 0x00c0ba6e6c00 by goroutine 94507:
github.com/minio/minio/cmd.(*xlStorageDiskIDCheck).StatVol.func1()
github.com/minio/minio/cmd/xl-storage-disk-id-check.go:419 +0x104
github.com/minio/minio/internal/ioutil.(*DeadlineWorker).Run.func1()
github.com/minio/minio/internal/ioutil/ioutil.go:141 +0x33
Previous read at 0x00c0ba6e6c00 by goroutine 94463:
github.com/minio/minio/cmd.(*xlStorageDiskIDCheck).StatVol()
github.com/minio/minio/cmd/xl-storage-disk-id-check.go:422 +0x47e
github.com/minio/minio/cmd.getBucketInfoLocal.func1()
github.com/minio/minio/cmd/peer-s3-server.go:275 +0x122
github.com/minio/pkg/v2/sync/errgroup.(*Group).Go.func1()
```
Probably back from #17701
Race checks would occasionally show race on handleMsgWg WaitGroup by debug messages (used in test only).
Use the `connMu` mutex to protect this against concurrent Wait/Add.
Fixes#18827
When rejecting incoming grid requests fill out the rejection reason and log it once.
This will give more context when startup is failing. Already logged after a retry on caller.
support proxying of tagging requests in active-active replication
Note: even if proxying is successful, PutObjectTagging/DeleteObjectTagging
will continue to report a 404 since the object is not present locally.
Add a hidden configuration under the scanner sub section to configure if
the scanner should sleep between two objects scan. The configuration has
only effect when there is no drive activity related to s3 requests or
healing.
By default, the code will keep the current behavior which is doing
sleep between objects.
To forcefully enable the full scan speed in idle mode, you can do this:
`mc admin config set myminio scanner idle_speed=full`
NOTE: This feature is not retro-active; it will not cater to previous transactions
on existing setups.
To enable this feature, please set ` _MINIO_DRIVE_QUORUM=on` environment
variable as part of systemd service or k8s configmap.
Once this has been enabled, you need to also set `list_quorum`.
```
~ mc admin config set alias/ api list_quorum=auto`
```
A new debugging tool is available to check for any missing counters.
Following policies if present
```
"Condition": {
"IpAddress": {
"aws:SourceIp": [
"54.240.143.0/24",
"2001:DB8:1234:5678::/64"
]
}
}
```
And client is making a request to MinIO via IPv6 can
potentially crash the server.
Workarounds are turn-off IPv6 and use only IPv4
This PR also increases per node bpool memory from 1024 entries
to 2048 entries; along with that, it also moves the byte pool
centrally instead of being per pool.
`(*xlStorageDiskIDCheck).CreateFile` wraps the incoming reader in `xioutil.NewDeadlineReader`.
The wrapped reader is handed to `(*xlStorage).CreateFile`. This performs a Read call via `writeAllDirect`,
which reads into an `ODirectPool` buffer.
`(*DeadlineReader).Read` spawns an async read into the buffer. If a timeout is hit while reading,
the read operation returns to `writeAllDirect`. The operation returns an error and the buffer is reused.
However, if the async `Read` call unblocks, it will write to the now recycled buffer.
Fix: Remove the `DeadlineReader` - it is inherently unsafe. Instead, rely on the network timeouts.
This is not a disk timeout, anyway.
Regression in https://github.com/minio/minio/pull/17745
This patch adds the targetID to the existing notification target metrics
and deprecates the current target metrics which points to the overall
event notification subsystem
use memory for async events when necessary and dequeue them as
needed, for all synchronous events customers must enable
```
MINIO_API_SYNC_EVENTS=on
```
Async events can be lost but is upto to the admin to
decide what they want, we will not create run-away number
of goroutines per event instead we will queue them properly.
Currently the max async workers is set to runtime.GOMAXPROCS(0)
which is more than sufficient in general, but it can be made
configurable in future but may not be needed.
`OpMuxConnectError` was not handled correctly.
Remove local checks for single request handlers so they can
run before being registered locally.
Bonus: Only log IAM bootstrap on startup.
When minio runs with MINIO_CI_CD=on, it is expected to communicate
with the locally running SUBNET. This is happening in the case of MinIO
via call home functionality. However, the subnet-related functionality inside the
console continues to talk to the SUBNET production URL. Because of this,
the console cannot be tested with a locally running SUBNET.
Set the env variable CONSOLE_SUBNET_URL correctly in such cases.
(The console already has code to use the value of this variable
as the subnet URL)
Optionally allows customers to enable
- Enable an external cache to catch GET/HEAD responses
- Enable skipping disks that are slow to respond in GET/HEAD
when we have already achieved a quorum
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
Currently, once the audit becomes offline, there is no code that tries
to reconnect to the audit, at the same time Send() quickly returns with
an error without really trying to send a message the audit endpoint; so
the audit endpoint will never be online again.
Fixing this behavior; the current downside is that we miss printing some
logs when the audit becomes offline; however this information is
available in prometheus
Later, we can refactor internal/logger so the http endpoint can send errors to
console target.
sendfile implementation to perform DMA on all platforms
Go stdlib already supports sendfile/splice implementations
for
- Linux
- Windows
- *BSD
- Solaris
Along with this change however O_DIRECT for reads() must be
removed as well since we need to use sendfile() implementation
The main reason to add O_DIRECT for reads was to reduce the
chances of page-cache causing OOMs for MinIO, however it would
seem that avoiding buffer copies from user-space to kernel space
this issue is not a problem anymore.
There is no Go based memory allocation required, and neither
the page-cache is referenced back to MinIO. This page-
cache reference is fully owned by kernel at this point, this
essentially should solve the problem of page-cache build up.
With this now we also support SG - when NIC supports Scatter/Gather
https://en.wikipedia.org/wiki/Gather/scatter_(vector_addressing)
replace io.Discard usage to fix NUMA copy() latencies
On NUMA systems copying from 8K buffer allocated via
io.Discard leads to large latency build-up for every
```
copy(new8kbuf, largebuf)
```
can in-cur upto 1ms worth of latencies on NUMA systems
due to memory sharding across NUMA nodes.
`GetParityForSC` has a value receiver, so Config is copied before the lock is obtained.
Make it pointer receiver.
Fixes:
```
WARNING: DATA RACE
Read at 0x0000079cdd10 by goroutine 190:
github.com/minio/minio/cmd.(*erasureServerPools).BackendInfo()
github.com/minio/minio/cmd/erasure-server-pool.go:579 +0x6f
github.com/minio/minio/cmd.(*erasureServerPools).LocalStorageInfo()
github.com/minio/minio/cmd/erasure-server-pool.go:614 +0x3c6
github.com/minio/minio/cmd.(*peerRESTServer).LocalStorageInfoHandler()
github.com/minio/minio/cmd/peer-rest-server.go:347 +0x4ea
github.com/minio/minio/cmd.(*peerRESTServer).LocalStorageInfoHandler-fm()
...
WARNING: DATA RACE
Read at 0x0000079cdd10 by goroutine 190:
github.com/minio/minio/cmd.(*erasureServerPools).BackendInfo()
github.com/minio/minio/cmd/erasure-server-pool.go:579 +0x6f
github.com/minio/minio/cmd.(*erasureServerPools).LocalStorageInfo()
github.com/minio/minio/cmd/erasure-server-pool.go:614 +0x3c6
github.com/minio/minio/cmd.(*peerRESTServer).LocalStorageInfoHandler()
github.com/minio/minio/cmd/peer-rest-server.go:347 +0x4ea
github.com/minio/minio/cmd.(*peerRESTServer).LocalStorageInfoHandler-fm()
```
If target went offline while MinIO was down, error once
while trying to send message. If target goes offline during
MinIO server running, it already comes through ping() call
and errors out if target offline.
Signed-off-by: Shubhendu Ram Tripathi <shubhendu@minio.io>
all retries must not be counted as failed messages,
a failed message is a single counter not for all
retries, this PR fixes this.
Also we do not need to retry 10-times, instead we should
retry at max 3 times with some jitter to deliver the
messages.
- we already have MRF for most recent failures
- we trigger healing during HEAD/GET operation
These are enough, also change the default max wait
from 5sec to 1sec for default scanner speed.
configs from 2020 server throws an
error due to deprecation of the keys
however an attempt is made to parse
them, we should have chosen existing
defaults - this PR fixes that.
Fix drive rotational calculation status
If a MinIO drive path is mounted to a partition and not a real disk,
getting the rotational status would fail because Linux does not expose
that status to partition; In other words,
/sys/block/drive-partition-name/queue/rotational does not exist;
To fix the issue, the code will search for the rotational status of the
disk that hosts the partition, and this can be calculated from the
real path of /sys/class/block/<drive-partition-name>
Keys are helpful to ensure the strict ordering of messages, however currently the
code uses a random request id for every log, hence using the request-id
as a Kafka key is not serve any purpose;
This commit removes the usage of the key, to also fix the audit issue from
internal subsystem that does not have a request ID.
This commit updates the minio/kes-go dependency
to v0.2.0 and updates the existing code to work
with the new KES APIs.
The `SetPolicy` handler got removed since it
may not get implemented by KES at all and could
not have been used in the past since stateless KES
is read-only w.r.t. policies and identities.
Signed-off-by: Andreas Auernhammer <hi@aead.dev>
Two fields in lifecycles made GOB encoding consistently fail with `gob: type lifecycle.Prefix has no exported fields`.
This meant that in distributed systems listings would never be able to continue and would restart on every call.
Fix issues and be sure to log these errors at least once per bucket. We may see some connectivity errors here, but we shouldn't hide them.
Bonus:
- avoid calling DiskInfo() calls when missing blocks
instead heal the object using MRF operation.
- change the max_sleep to 250ms beyond that we will
not stop healing.
Send() is synchronous and can affect the latency of S3 requests when the
logger buffer is full.
Avoid checking if the HTTP target is online or not and increase the
workers anyway since the buffer is already full.
Also, avoid logs flooding when the audit target is down.
slower drives get knocked off because they are too slow via
active monitoring, we do not need to block calls arbitrarily.
Serializing adds latencies for already slow calls, remove
it for SSDs/NVMEs
Also, add a selection with context when writing to `out <-`
channel, to avoid any potential blocks.
Now it would list details of all KMS instances with additional
attributes `endpoint` and `version`. In the case of k8s-based
deployment the list would consist of a single entry.
Signed-off-by: Shubhendu Ram Tripathi <shubhendu@minio.io>
Also shutdown poll add jitter, to verify if the shutdown
sequence can finish before 500ms, this reduces the overall
time taken during "restart" of the service.
Provides speedup for `mc admin service restart` during
active I/O, also ensures that systemd doesn't treat the
returned 'error' as a failure, certain configurations in
systemd can cause it to 'auto-restart' the process by-itself
which can interfere with `mc admin service restart`.
It can be observed how now restarting the service is
much snappier.
DNS refresh() in-case of MinIO can safely re-use
the previous values on bare-metal setups, since
bare-metal arrangements do not change DNS in any
manner commonly.
This PR simplifies that, we only ever need DNS caching
on bare-metal setups.
- On containerized setups do not enable DNS
caching at all, as it may have adverse effects on
the overall effectiveness of k8s DNS systems.
k8s DNS systems are dynamic and expect applications
to avoid managing DNS caching themselves, instead
provide a cleaner container native caching
implementations that must be used.
- update IsDocker() detection, including podman runtime
- move to minio/dnscache fork for a simpler package
Following extension allows users to specify immediate purge of
all versions as soon as the latest version of this object has
expired.
```
<LifecycleConfiguration>
<Rule>
<ID>ClassADocRule</ID>
<Filter>
<Prefix>classA/</Prefix>
</Filter>
<Status>Enabled</Status>
<Expiration>
<Days>3650</Days>
<ExpiredObjectAllVersions>true</ExpiredObjectAllVersions>
</Expiration>
</Rule>
...
```
This change adds a `Secret` property to `HelpKV` to identify secrets
like passwords and auth tokens that should not be revealed by the server
in its configuration fetching APIs. Configuration reporting APIs now do
not return secrets.
With the current asynchronous behaviour in sending notification events
to the targets, we can't provide guaranteed delivery as the systems
might go for restarts.
For such event-driven use-cases, we can provide an option to enable
synchronous events where the APIs wait until the event is successfully
sent or persisted.
This commit adds 'MINIO_API_SYNC_EVENTS' env which when set to 'on'
will enable sending/persisting events to targets synchronously.
- lifecycle must return InvalidArgument for rule errors
- do not return `null` versionId in HTTP header
- reject mixed SSE uploads with correct error message
