This change adds server-side-encryption support for HEAD, GET and PUT
operations. This PR only addresses single-part PUTs and GETs without
HTTP ranges.
Further this change adds the concept of reserved object metadata which is required
to make encrypted objects tamper-proof and provide API compatibility to AWS S3.
This PR adds the following reserved metadata entries:
- X-Minio-Internal-Server-Side-Encryption-Iv ('guarantees' tamper-proof property)
- X-Minio-Internal-Server-Side-Encryption-Kdf (makes Key-MAC computation negotiable in future)
- X-Minio-Internal-Server-Side-Encryption-Key-Mac (provides AWS S3 API compatibility)
The prefix `X-Minio_Internal` specifies an internal metadata entry which must not
send to clients. All client requests containing a metadata key starting with `X-Minio-Internal`
must also rejected. This is implemented by a generic-handler.
This PR implements SSE-C separated from client-side-encryption (CSE). This cannot decrypt
server-side-encrypted objects on the client-side. However, clients can encrypted the same object
with CSE and SSE-C.
This PR does not address:
- SSE-C Copy and Copy part
- SSE-C GET with HTTP ranges
- SSE-C multipart PUT
- SSE-C Gateway
Each point must be addressed in a separate PR.
Added to vendor dir:
- x/crypto/chacha20poly1305
- x/crypto/poly1305
- github.com/minio/sio
It is possible that x-amz-content-sha256 is set through
the query params in case of presigned PUT calls, make sure
that we validate the incoming x-amz-content-sha256 properly.
Current code simply just allows this without honoring the
set x-amz-content-sha256, fix it.
Previously ID/ETag from backend service is used as is which causes
failure on s3cmd like tools where those tools use ETag as checksum to
validate data. This is fixed by prepending "-1".
Refer minio/mint#193minio/mint#201
When MINIO_TRACE_DIR is provided, create a new log file and store all
HTTP requests + responses data, body are excluded to reduce memory
consumption. MINIO_HTTP_TRACE=1 enables logging. Use non mem
consuming http req/resp recorders, the maximum is about 32k per request.
This logs to STDOUT, body logging is disabled for PutObject PutObjectPart
GetObject.
Verify() was being called by caller after the data
has been successfully read after io.EOF. This disconnection
opens a race under concurrent access to such an object.
Verification is not necessary outside of Read() call,
we can simply just do checksum verification right inside
Read() call at io.EOF.
This approach simplifies the usage.
In some cases, Cache manager returns ErrCacheFull error when creating a
new cache buffer but the code still sends object data to nil cache buffer data.
Dont print the error errFileNotFound, as it is expected that concurrent
complete-multipart-uploads or abort-multipart-uploads would have deleted
the file, and the file may not be found
Fixes: https://github.com/minio/minio/issues/5056
Every so often we get requirements for creating
directories/prefixes and we end up rejecting
such requirements. This PR implements this and
allows empty directories without any new file
addition to backend.
Existing lower APIs themselves are leveraged to provide
this behavior. Only FS backend supports this for
the time being as desired.
s3cmd cli fails when trying to upload a file to azure gateway.
Previous fixes in azure to handle client side encryption alone
did not completely address the problem.
We need to possibilly convert all the x-amz-meta-<name>
, i.e specifically <name> should be converted into a
C# identifier as mentioned in the docs for `put-blob`.
https://docs.microsoft.com/en-us/rest/api/storageservices/put-blob
```
s3cmd put README.md s3://myanis/
upload: 'README.md' -> 's3://myanis/README.md' [1 of 1]
4598 of 4598 100% in 0s 47.24 kB/s done
upload: 'README.md' -> 's3://myanis/README.md' [1 of 1]
4598 of 4598 100% in 0s 50.47 kB/s done
ERROR: S3 error: 400 (InvalidArgument): Your metadata headers are not supported.
```
There is a separate issue with s3cmd after this fix is applied where
the ETag is wronly validated https://github.com/s3tools/s3cmd/issues/880
But that is an upstream s3cmd problem which wrongly interprets ETag
to be md5sum of the content that was uploaded.
This PR addresses a long standing dependency on
`gopkg.in/check.v1` project used for our tests.
All tests are re-written to use the go default
testing framework instead.
There was no reason for us to use an external
package where Go tools are sufficient for this.
This is done to avoid repeated declaration of not-implemented
functions for each gateway. It also avoids a possible bug in go
https://github.com/golang/go/issues/18468 which is triggered on
our multiple PRs already.
- Add release-time conversion helpers
- Split GetCurrentReleaseTime() into two simpler functions.
- Avoid appending strings when assembling user-agent string.
- Reorder release info URLs to check the newer URLs earlier.
- Remove trivial low-level functions created solely for the purpose of
writing tests.
- Remove some unnecessary tests.
Amazon S3 API expects all incoming stream has a content-length
set it was superflous for us to support object layer which supports
unknown sized stream as well, this PR removes such requirements
and explicitly error out if input stream is less than zero.
* Enable ListMultipartUploads and ListObjectParts for FS.
Previously we had disabled ListMultipartUploads and ListObjectParts
to see if any clients break. Docker registry broke. This patch
enables ListMultipartUploads and ListObjectParts, however
ListMultipartUploads with prefix based listing is not
supported (which is not used by docker registry anyway).
i.e ListMultipartUploads will need exact object name.
Gateway implementation of ListObjectsV1 does not validate maxKeys range.
Raise an InvalidArgument when maxKeys is negative so that ListObjects
call is compatible with S3 on all gateways.
Gateway interface implementations of GetBucketInfo() under
azure and s3 gateway did not perform any bucketname input
validation resulting in incorrect responses when the tests
are expecting InvalidBucketName.
Fixes#4983
When running `make test` in docker, two test cases cause hanging.
This Patch fixes the problem by removing those test cases.
Thanks to @ws141 for identifying the problem.
The reedsolomon library now avoids allocations during reconstruction.
This change exploits that to reduce memory allocs and GC preasure during
healing and reading.
Previously we were wrongly adding `?` as part
of the resource name, add a test case to check
if this is handled properly.
Thanks to @kannappanr for reproducing this.
Without this change presigned URL generated with following
command would fail with signature mismatch.
```
aws s3 presign s3://testbucket/functional-tests.sh
```
It can happen that an incoming PutObject() request might
have inputs of following form eg:-
- bucketName is 'testbucket'
- objectName is '/'
bucketName exists and was previously created but there
are no other objects in this bucket. In a situation like
this parentDirIsObject() goes into an infinite loop.
Verifying that if '/' is an object fails on both backends
but the resulting `path.Dir('/')` returns `'/'` this causes
the closure to loop onto itself.
Fixes#4940
This change removes the ReadFileWithVerify function from the
StorageAPI. The ReadFile was basically a redirection to ReadFileWithVerify.
This change removes the redirection and moves the logic of
ReadFileWithVerify directly into ReadFile.
This removes a lot of unnecessary code in all StorageAPI implementations.
Fixes#4946
* review: fix doc and typos
Previously init multipart upload stores metadata of an object which is
used for complete multipart. This patch makes azure gateway to store
metadata information of init multipart object in azure in the name of
'minio.sys.tmp/multipart/v1/<UPLOAD-ID>/meta.json' and uses this
information on complete multipart.
This change refactor the ObjectLayer PutObject and PutObjectPart
functions. Instead of passing an io.Reader and a size to PUT operations
ObejectLayer expects an HashReader.
A HashReader verifies the MD5 sum (and SHA256 sum if required) of the object.
This change updates all all PutObject(Part) calls and removes unnecessary code
in all ObjectLayer implementations.
Fixes#4923
This is an improvement upon existing implementation
by avoiding transfer of access and secret keys over
the network. This change only exchanges JWT tokens
generated by an rpc client. Even if the JWT can be
traced over the network on a non-TLS connection, this
change makes sure that we never really expose the
secret key over the network.
Previously minio gateway returns invalid bucket name error for invalid
meta data. This is fixed by returning BadRequest with 'Unsupported
metadata' in response.
Fixes#4891
When servers are started simultaneously across multiple
nodes or simulating a local setup, it can happen such
that one of the servers in setup reaches a following
situation where it observes
- Some servers are formatted
- Some servers are unformatted
- Some servers are offline
Current state machine doesn't handle this correctly, to fix
this situation where we have unformatted, formatted and
disks offline we do not decisively know the course of
action. So we wait for the offline disks to change their state.
Once the offline disks change their state to either one of these
states we can decisively move forward.
- nil (formatted disk)
- errUnformattedDisk
- Or any other error such as errCorruptedDisk.
Fixes#4903
The default timeout of 30secs is not enough for high latency
environments, change these values to use 15 minutes instead.
With 30secs I/O timeouts seem to be quite common, this leads
to pretty much most SDKs and clients reconnect. This in-turn
causes significant performance problems. On a low latency
interconnect this can be quite challenging to transfer large
amounts of data. Setting this value to 15minutes covers
pretty much all known cases.
This PR was tested with `wondershaper <NIC> 20000 20000` by
limiting the network bandwidth to 20Mbit/sec. Default timeout
caused a significant amount of I/O timeouts, leading to
constant retires from the client. This seems to be more common
with tools like rclone, restic which have high concurrency set
by default. Once the value was fixed to 15minutes i/o timeouts
stopped and client could steadily upload data to the server
even while saturating the network.
Fixes#4670
Previously if any multipart part size > 100MiB is uploaded, azure
gateway returns error.
This patch fixes the issue by creating sub parts sizing each 100MiB of
given multipart part. On complete multipart, it fetches all uploaded
azure block ids for each parts and performs completion.
Fixes#4868
- Region handling can now use region endpoints directly.
- All uploads are streaming no more large buffer needed.
- Major API overhaul for CopyObject(dst, src)
- Fixes bugs present in existing code for copying
- metadata replace directive CopyObject
- PutObjectPart doesn't require md5Sum and sha256
All `net/rpc` requests go to `/minio`, so the existing
generic handler for reserved bucket check would essentially
erroneously send errors leading to distributed setups to
wait infinitely.
For `net/rpc` requests alone we should skip this check and
allow resource bucket names to be from `/minio` .
Current code was just using io.ReadAll() on an fd()
which might have moved underneath due to a concurrent
read operation. Subsequent read will result in EOF
We should always seek back and read again. pread()
is allowed on all platforms use io.SectionReader to
read from the beginning of the file.
Fixes#4842
Bcrypt is not neccessary and not used properly. This change
replace the whole bcrypt hash computation through a constant time
compare and removes bcrypt from the code base.
Fixes#4813
If a TopicConfiguration element or CloudFunction element is found in
configuration submitted to PutBucketNotification API, an BadRequest
error is returned.
S3 only allows http headers with a size of 8 KB and user-defined metadata
with a size of 2 KB. This change adds a new API error and returns this
error to clients which sends to large http requests.
Fixes#4634
We don't need to typecast identifiers from
their base to type to same type again. This
is not a bug and compiler is fine to skip
it but it is better to avoid if not needed.
This change provides new implementations of the XL backend operations:
- create file
- read file
- heal file
Further this change adds table based tests for all three operations.
This affects also the bitrot algorithm integration. Algorithms are now
integrated in an idiomatic way (like crypto.Hash).
Fixes#4696Fixes#4649Fixes#4359
Wait for remote hosts to resolve instead of failing on first host
resolution error, when running in Kubernetes or Docker environment.
Note that
- Waiting is based on exponential back-off mechanism
- If run as a binary, server fails if remote host is not resolvable
This is needed because in orchestration platforms like Kubernetes, remote
hosts are started sequentially and all the hosts are not up initially,
though they are expected to come up in a short time frame
It is difficult to identify a cap on the waiting time due to
non-deterministic nature of infrastructure platforms, so the server waits
infinitely for the hosts to come up, while logging the error messages to
the console.
Fixes: https://github.com/minio/minio/issues/4669
Since go1.8 os.RemoveAll and os.MkdirAll both support long
path names i.e UNC path on windows. The code we are carrying
was directly borrowed from `pkg/os` package and doesn't need
to be in our repo anymore. As a side affect this also
addresses our codecoverage issue.
Refer #4658
* Prevent unnecessary verification of parity blocks while reading erasure
coded file.
* Update klauspost/reedsolomon and just only reconstruct data blocks while
reading (prevent unnecessary parity block reconstruction)
* Remove Verification of (all) reconstructed Data and Parity blocks since
in our case we are protected by bit rot protection. And even if the
verification would fail (essentially impossible) there is no way to
definitively say whether the data is still correct or not, so this call
make no sense for our use case.
Implement an offline mode for remote storage to cache the
offline status of a node in order to prevent network calls
that are bound to fail. After a time interval an attempt
will be made to restore the connection and mark the node
as online if successful.
Fixes#4183
It is possible at times due to a typo when distributed mode was intended
a user might end up starting standalone erasure mode causing confusion.
Add code to check this based on some standard heuristic guess work and
report an error to the user.
Fixes#4686
Under the call flow
```
Readdir
+
|
|
| path-entry
|
|
v
StatDir
```
Existing code was written in a manner where say
a bucket/top-level directory was indeed deleted
between Readdir() and before StatDir() we would
ignore certain errors. This is not a plausible
situation and might not happen in almost all
practical cases. We do not have to look for
or interpret these errors returned by StatDir()
instead we can just collect the successful
values and return back to the client. We do not
need to pre-maturely decide on bucket access
we just let filesystem decide subsequently for
real I/O operations.
Refer #4658
This is in preparation for updated admin heal API.
* Improve case analysis of healFormatXL() - fixes a case where disks
could have unhandled errors.
* Simplify healFormatXLFreshDisks() and healFormatXLCorruptedDisks()
to share more code and handle fewer cases for improved simplicity
and reduced code repetition.
* Fix test cases.
This commit changes posix's deleteFile() to not upstream errors from
removing parent directories. This fixes a race condition.
The race condition occurs when multiple deleteFile()s are called on the
same parent directory, but different child files. Because deleteFile()
recursively removes parent directories if they are empty, but
deleteFile() errors if the selected deletePath does not exist, there was
an opportunity for a race condition. The two processes would remove the
child directories successfully, then depend on the parent directory
still existing. In some cases this is an invalid assumption, because
other processes can remove the parent directory beforehand. This commit
changes deleteFile() to not upstream an error if one occurs, because the
only required error should be from the immediate deletePath, not from a
parent path.
In the specific bug report, multiple CompleteMultipartUpload requests
would launch multiple deleteFile() requests. Because they chain up on
parent directories, ultimately at the end, there would be multiple
remove files for the ultimate parent directory,
.minio.sys/multipart/{bucket}. Because only one will succeed and one
will fail, an error would be upstreamed saying that the file does not
exist, and the CompleteMultipartUpload code interpreted this as
NoSuchKey, or that the object/part id doesn't exist. This was faulty
behavior and is now fixed.
The added test fails before this change and passes after this change.
Fixes: https://github.com/minio/minio/issues/4727
This commit adds a new test for isDirEmpty (for code coverage) and
changes around the error conditional. Previously, there was a `return
nil` statement that would only be triggered under a race condition and
would trip up our test coverage for no real reason. With this new error
conditional, there's no awkward 'else'-esque condition, which means test
coverage will not change between runs for no reason in this specific
test. It's also a cleaner read.
This commit makes fsDeleteFile() simply call deleteFile() after calling
the relevant path length checking functions. This DRYs the code base.
This commit removes the Stat() call from deleteFile(). This improves
performance and removes any possibility of a race condition.
This additionally adds tests and a benchmark for said function. The
results aren't very consistent, although I'd expect this commit to make
it faster.
This commit fixes a potential security issue, whereby a full-access
token to the server would be available in the GET URL of a download
request. This fixes that issue by introducing short-expiry tokens, which
are only valid for one minute, and are regenerated for every download
request.
This commit specifically introduces the short-lived tokens, adds tests
for the tokens, adds an RPC call for generating a token given a
full-access token, updates the browser to use the new tokens for
requests where the token is passed as a GET parameter, and adds some
tests with the new temporary tokens.
Refs: https://github.com/minio/minio/pull/4673
This PR fixes the issue of cleaning up in-memory state
properly. Without this PR we can lead to security
situations where new bucket would inherit wrong
permissions on bucket and expose objects erroneously.
Fixes#4714
* Refactor HTTP server to address bugs
* Remove unnecessary goroutine to start multiple TCP listeners.
* HTTP server waits for shutdown to maximum of Server.ShutdownTimeout
than per serverShutdownPoll.
* Handles new connection errors properly.
* Handles read and write timeout properly.
* Handles error on start of HTTP server properly by exiting minio
process.
Fixes#4494#4476 & fixed review comments
This PR serves to fix following things in GCS gateway.
- fixes leaks in object reader and writer, not getting closed
under certain situations. This led to go-routine leaks.
- apparent confusing issue in case of complete multipart upload,
where it is currently possible for an entirely different
object name to concatenate parts of a different object name
if you happen to know the upload-id and parts of the object.
This is a very rare scenario but it is possible.
- succint usage of certain parts of code base and re-use.
Fixed header-to-metadat extraction. The extractMetadataFromHeader function should return an error if the http.Header contains a non-canonicalized key. The reason is that the keys can be manually set (through a map access) which can lead to ugly bugs.
Also fixed header-to-metadata extraction. Return a InternalError if a non-canonicalized key is found in a http.Header. Also log the error.
This is needed to avoid proxies buffering the connection
this is also a HTTP standard way to handle this situation
where server is sending back events in asynchronously.
For more details read https://goo.gl/RCML9f
Fixes - https://github.com/minio/minio-go/issues/731
When the browser asks for a GET presigned url, this latter is not
encoded and can be confusing when the user copies-pastes it somewhere,
especially when the path contains a space.
Current state-machine didn't honor a situation
which can arise when there is a combination of
- formatted
- unformatted
- corrupted
disks - this combination invariably goes into a
mode where all servers are waiting perpetually
forever thinking we will get quorum in future.
At this point there is a distant possibility of
ever getting a quorum since we don't even have
quorum number of disks offline.
We should exit and print a proper message per disk
to indicate what went wrong and what was detected
by the server.
Refer #4477
The ETag is constructed from md5 atttribute of object attributes
returned by the vendor's Composer. The md5 attribute comes back
as nil for large uploads. Instead the CRC32C should be used.
Refer to https://cloud.google.com/storage/docs/hashes-etagsFixes#4397
This implementation is similar to AMQP notifications:
* Notifications are published on a single topic as a JSON feed
* Topic is configurable, as is the QoS. Uses the paho.mqtt.golang
library for the mqtt connection, and supports connections over tcp
and websockets, with optional secure tls support.
* Additionally the minio server configuration has been bumped up
so mqtt configuration can be added.
* Configuration migration code is added with tests.
MQTT is an ISO standard M2M/IoT messaging protocol and was
originally designed for applications for limited bandwidth
networks. Today it's use is growing in the IoT space.
xl.storageDisks is sometimes passed to some low-level XL functions. Some disks in
xl.storageDisks are set to nil when they encounter some errors. This means all
elements in xl.storageDisks will be nil after some time which lead to an unusable XL.
Looks like if we follow pattern such as
```
_ = rlk
```
Go can potentially kick in GC and close the fd when
the reference is lost, only speculation is that
the cause here is `SetFinalizer` which is set on
`os.close()` internally in `os` stdlib.
This is unexpected and unsual endeavour for Go, but
we have to make sure the reference is never lost
and always dies with the server.
Fixes#4530
This patch also reverts previous changes which were
merged for migration to the newer disk format. We will
be bringing these changes in subsequent releases. But
we wish to add protection in this release such that
future release migrations are protected.
Revert "fs: Migration should handle bucketConfigs as regular objects. (#4482)"
This reverts commit 976870a391.
Revert "fs: Migrate object metadata to objects directory. (#4195)"
This reverts commit 76f4f20609.
isDocker was currently reading from `/proc/cgroup` file. But
this file alone is rather not conclusive evidence. Docker
internally has `.dockerenv` as a special file which we should
use instead.
Fixes#4456
Current code failed to anticipate the existence of files
which could have been created to corrupt the namespace such
as `policy.json` file created at the bucket top level.
In the current release creating such as file conflicts
with the namespace for future bucket policy operations.
We implemented migration of backend format to avoid situations
such as these.
This PR handles this situation, makes sure that the
erroneous files should have been moved properly.
Fixes#4478
Current code allowed it wrongly to generate secret key upto 100
we should only use 100 as a value to validate but for generating
it should be 40.
Fixes#4470
This makes lock RPCs similar to other RPCs where requests to the local
server bypass the network. Requests to the local lock-subsystem may
bypass the network layer and directly access the locking
data-structures.
This incidentally fixes#4451.
Currently redirection doesn't work in following scenarios
- server started with port ":80" and TLS is configured
client requested insecure request on port "80"
gets redirected to port 443 and fails.
The following commit f44f2e341c
fix was incomplete and we still had presigned URLs printing
in query strings in wrong fashion.
This PR fixes this properly. Avoid double encoding
percent encoded strings such as
`s3%!!(MISSING)A(MISSING)`
Print properly as json encoded.
`s3%3AObjectCreated%3A%2A`
Currently even when bucket doesn't exist we wrongly
return success, when an object is a directory prefix with
'/' as suffix and is of size 0.
This PR fixes this behavior.
Sending envVars along with access and secret
exposes the entire minio server's sensitive
information. This will be an unexpected
situation for all users.
If at all we need to look for things like if
credentials are set through env, we should
only have access to only this information
not the entire set of system envs.
Andreas Auernhammer
Krishna Srinivas
Krishnan Parthasarathi
Harshavardhana
kannappanr
Bala FA
Timon Wong
Frank Wessels
Aditya Manthramurthy
Julien Maitrehenry
A. Elleuch
Nitish Tiwari
poornas
fangyuxiang
ebozduman
Andrej Pregl
Justin Clift
wd256
Nitish Tiwari
Dee Koder
Aditya Manthramurthy
Aaron Walker
Brendan Ashworth
Remco Verhoef
Anis Elleuch
Nitish Tiwari
splinter98
Daniel Lind
samkevich
luomeiqin