perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
// Copyright (c) 2015-2023 MinIO, Inc.
|
|
|
|
//
|
|
|
|
// This file is part of MinIO Object Storage stack
|
|
|
|
//
|
|
|
|
// This program is free software: you can redistribute it and/or modify
|
|
|
|
// it under the terms of the GNU Affero General Public License as published by
|
|
|
|
// the Free Software Foundation, either version 3 of the License, or
|
|
|
|
// (at your option) any later version.
|
|
|
|
//
|
|
|
|
// This program is distributed in the hope that it will be useful
|
|
|
|
// but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
// GNU Affero General Public License for more details.
|
|
|
|
//
|
|
|
|
// You should have received a copy of the GNU Affero General Public License
|
|
|
|
// along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
|
|
|
|
package grid
|
|
|
|
|
|
|
|
import (
|
|
|
|
"bytes"
|
|
|
|
"context"
|
|
|
|
"crypto/tls"
|
|
|
|
"encoding/binary"
|
|
|
|
"errors"
|
|
|
|
"fmt"
|
|
|
|
"io"
|
|
|
|
"math"
|
|
|
|
"math/rand"
|
|
|
|
"net"
|
|
|
|
"net/http"
|
|
|
|
"runtime/debug"
|
|
|
|
"strings"
|
|
|
|
"sync"
|
|
|
|
"sync/atomic"
|
|
|
|
"time"
|
|
|
|
|
|
|
|
"github.com/gobwas/ws"
|
|
|
|
"github.com/gobwas/ws/wsutil"
|
|
|
|
"github.com/google/uuid"
|
|
|
|
"github.com/minio/madmin-go/v3"
|
2024-01-28 13:04:17 -05:00
|
|
|
xioutil "github.com/minio/minio/internal/ioutil"
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
"github.com/minio/minio/internal/logger"
|
|
|
|
"github.com/minio/minio/internal/pubsub"
|
2024-05-24 19:05:23 -04:00
|
|
|
xnet "github.com/minio/pkg/v3/net"
|
2024-03-26 14:12:57 -04:00
|
|
|
"github.com/puzpuzpuz/xsync/v3"
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
"github.com/tinylib/msgp/msgp"
|
|
|
|
"github.com/zeebo/xxh3"
|
|
|
|
)
|
|
|
|
|
2024-04-04 08:04:40 -04:00
|
|
|
func gridLogIf(ctx context.Context, err error, errKind ...interface{}) {
|
|
|
|
logger.LogIf(ctx, "grid", err, errKind...)
|
|
|
|
}
|
|
|
|
|
|
|
|
func gridLogIfNot(ctx context.Context, err error, ignored ...error) {
|
|
|
|
logger.LogIfNot(ctx, "grid", err, ignored...)
|
|
|
|
}
|
|
|
|
|
|
|
|
func gridLogOnceIf(ctx context.Context, err error, id string, errKind ...interface{}) {
|
|
|
|
logger.LogOnceIf(ctx, "grid", err, id, errKind...)
|
|
|
|
}
|
|
|
|
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
// A Connection is a remote connection.
|
|
|
|
// There is no distinction externally whether the connection was initiated from
|
|
|
|
// this server or from the remote.
|
|
|
|
type Connection struct {
|
|
|
|
// NextID is the next ID that can be used (atomic).
|
|
|
|
NextID uint64
|
|
|
|
|
|
|
|
// LastPong is last pong time (atomic)
|
|
|
|
// Only valid when StateConnected.
|
|
|
|
LastPong int64
|
|
|
|
|
|
|
|
// State of the connection (atomic)
|
|
|
|
state State
|
|
|
|
|
|
|
|
// Non-atomic
|
|
|
|
Remote string
|
|
|
|
Local string
|
|
|
|
|
|
|
|
// ID of this connection instance.
|
|
|
|
id uuid.UUID
|
|
|
|
|
|
|
|
// Remote uuid, if we have been connected.
|
2024-01-24 14:49:39 -05:00
|
|
|
remoteID *uuid.UUID
|
|
|
|
reconnectMu sync.Mutex
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
|
|
|
|
// Context for the server.
|
|
|
|
ctx context.Context
|
|
|
|
|
|
|
|
// Active mux connections.
|
2024-03-26 14:12:57 -04:00
|
|
|
outgoing *xsync.MapOf[uint64, *muxClient]
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
|
|
|
|
// Incoming streams
|
2024-03-26 14:12:57 -04:00
|
|
|
inStream *xsync.MapOf[uint64, *muxServer]
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
|
|
|
|
// outQueue is the output queue
|
|
|
|
outQueue chan []byte
|
|
|
|
|
|
|
|
// Client or serverside.
|
|
|
|
side ws.State
|
|
|
|
|
|
|
|
// Transport for outgoing connections.
|
|
|
|
dialer ContextDialer
|
|
|
|
header http.Header
|
|
|
|
|
|
|
|
handleMsgWg sync.WaitGroup
|
|
|
|
|
|
|
|
// connChange will be signaled whenever State has been updated, or at regular intervals.
|
|
|
|
// Holding the lock allows safe reads of State, and guarantees that changes will be detected.
|
|
|
|
connChange *sync.Cond
|
|
|
|
handlers *handlers
|
|
|
|
|
|
|
|
remote *RemoteClient
|
|
|
|
auth AuthFn
|
|
|
|
clientPingInterval time.Duration
|
|
|
|
connPingInterval time.Duration
|
|
|
|
tlsConfig *tls.Config
|
|
|
|
blockConnect chan struct{}
|
|
|
|
|
|
|
|
incomingBytes func(n int64) // Record incoming bytes.
|
|
|
|
outgoingBytes func(n int64) // Record outgoing bytes.
|
|
|
|
trace *tracer // tracer for this connection.
|
|
|
|
baseFlags Flags
|
Add per connection RPC metrics (#19852)
Provides individual and aggregate stats for each RPC connection.
Example:
```
"rpc": {
"collectedAt": "2024-05-31T14:33:29.1373103+02:00",
"connected": 30,
"disconnected": 0,
"outgoingStreams": 69,
"incomingStreams": 0,
"outgoingBytes": 174822796,
"incomingBytes": 175821566,
"outgoingMessages": 768595,
"incomingMessages": 768589,
"outQueue": 0,
"lastPongTime": "2024-05-31T12:33:28Z",
"byDestination": {
"http://127.0.0.1:9001": {
"collectedAt": "2024-05-31T14:33:29.1373103+02:00",
"connected": 5,
"disconnected": 0,
"outgoingStreams": 2,
"incomingStreams": 0,
"outgoingBytes": 38432543,
"incomingBytes": 66604052,
"outgoingMessages": 229496,
"incomingMessages": 229575,
"outQueue": 0,
"lastPongTime": "2024-05-31T12:33:27Z"
},
"http://127.0.0.1:9002": {
"collectedAt": "2024-05-31T14:33:29.1373103+02:00",
"connected": 5,
"disconnected": 0,
"outgoingStreams": 6,
"incomingStreams": 0,
"outgoingBytes": 38215680,
"incomingBytes": 66121283,
"outgoingMessages": 228525,
"incomingMessages": 228510,
"outQueue": 0,
"lastPongTime": "2024-05-31T12:33:27Z"
},
...
```
2024-06-01 01:16:24 -04:00
|
|
|
outBytes atomic.Int64
|
|
|
|
inBytes atomic.Int64
|
|
|
|
inMessages atomic.Int64
|
|
|
|
outMessages atomic.Int64
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
|
|
|
|
// For testing only
|
2024-06-07 11:51:52 -04:00
|
|
|
debugInConn net.Conn
|
|
|
|
debugOutConn net.Conn
|
|
|
|
blockMessages atomic.Pointer[<-chan struct{}]
|
|
|
|
addDeadline time.Duration
|
|
|
|
connMu sync.Mutex
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
}
|
|
|
|
|
|
|
|
// Subroute is a connection subroute that can be used to route to a specific handler with the same handler ID.
|
|
|
|
type Subroute struct {
|
|
|
|
*Connection
|
|
|
|
trace *tracer
|
|
|
|
route string
|
|
|
|
subID subHandlerID
|
|
|
|
}
|
|
|
|
|
|
|
|
// String returns a string representation of the connection.
|
|
|
|
func (c *Connection) String() string {
|
|
|
|
return fmt.Sprintf("%s->%s", c.Local, c.Remote)
|
|
|
|
}
|
|
|
|
|
|
|
|
// StringReverse returns a string representation of the reverse connection.
|
|
|
|
func (c *Connection) StringReverse() string {
|
|
|
|
return fmt.Sprintf("%s->%s", c.Remote, c.Local)
|
|
|
|
}
|
|
|
|
|
|
|
|
// State is a connection state.
|
|
|
|
type State uint32
|
|
|
|
|
|
|
|
// MANUAL go:generate stringer -type=State -output=state_string.go -trimprefix=State $GOFILE
|
|
|
|
|
|
|
|
const (
|
|
|
|
// StateUnconnected is the initial state of a connection.
|
|
|
|
// When the first message is sent it will attempt to connect.
|
|
|
|
StateUnconnected = iota
|
|
|
|
|
|
|
|
// StateConnecting is the state from StateUnconnected while the connection is attempted to be established.
|
|
|
|
// After this connection will be StateConnected or StateConnectionError.
|
|
|
|
StateConnecting
|
|
|
|
|
|
|
|
// StateConnected is the state when the connection has been established and is considered stable.
|
|
|
|
// If the connection is lost, state will switch to StateConnecting.
|
|
|
|
StateConnected
|
|
|
|
|
|
|
|
// StateConnectionError is the state once a connection attempt has been made, and it failed.
|
|
|
|
// The connection will remain in this stat until the connection has been successfully re-established.
|
|
|
|
StateConnectionError
|
|
|
|
|
|
|
|
// StateShutdown is the state when the server has been shut down.
|
|
|
|
// This will not be used under normal operation.
|
|
|
|
StateShutdown
|
|
|
|
|
|
|
|
// MaxDeadline is the maximum deadline allowed,
|
|
|
|
// Approx 49 days.
|
|
|
|
MaxDeadline = time.Duration(math.MaxUint32) * time.Millisecond
|
|
|
|
)
|
|
|
|
|
|
|
|
// ContextDialer is a dialer that can be used to dial a remote.
|
|
|
|
type ContextDialer func(ctx context.Context, network, address string) (net.Conn, error)
|
|
|
|
|
|
|
|
// DialContext implements the Dialer interface.
|
|
|
|
func (c ContextDialer) DialContext(ctx context.Context, network, address string) (net.Conn, error) {
|
|
|
|
return c(ctx, network, address)
|
|
|
|
}
|
|
|
|
|
|
|
|
const (
|
2024-02-28 12:54:52 -05:00
|
|
|
defaultOutQueue = 65535 // kind of close to max open fds per user
|
2024-02-08 14:21:21 -05:00
|
|
|
readBufferSize = 32 << 10 // 32 KiB is the most optimal on Linux
|
|
|
|
writeBufferSize = 32 << 10 // 32 KiB is the most optimal on Linux
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
defaultDialTimeout = 2 * time.Second
|
|
|
|
connPingInterval = 10 * time.Second
|
2024-02-06 16:34:46 -05:00
|
|
|
connWriteTimeout = 3 * time.Second
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
)
|
|
|
|
|
|
|
|
type connectionParams struct {
|
|
|
|
ctx context.Context
|
|
|
|
id uuid.UUID
|
|
|
|
local, remote string
|
|
|
|
dial ContextDialer
|
|
|
|
handlers *handlers
|
|
|
|
auth AuthFn
|
|
|
|
tlsConfig *tls.Config
|
|
|
|
incomingBytes func(n int64) // Record incoming bytes.
|
|
|
|
outgoingBytes func(n int64) // Record outgoing bytes.
|
|
|
|
publisher *pubsub.PubSub[madmin.TraceInfo, madmin.TraceType]
|
|
|
|
|
|
|
|
blockConnect chan struct{}
|
|
|
|
}
|
|
|
|
|
|
|
|
// newConnection will create an unconnected connection to a remote.
|
|
|
|
func newConnection(o connectionParams) *Connection {
|
|
|
|
c := &Connection{
|
|
|
|
state: StateUnconnected,
|
|
|
|
Remote: o.remote,
|
|
|
|
Local: o.local,
|
|
|
|
id: o.id,
|
|
|
|
ctx: o.ctx,
|
2024-03-26 14:12:57 -04:00
|
|
|
outgoing: xsync.NewMapOfPresized[uint64, *muxClient](1000),
|
|
|
|
inStream: xsync.NewMapOfPresized[uint64, *muxServer](1000),
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
outQueue: make(chan []byte, defaultOutQueue),
|
|
|
|
dialer: o.dial,
|
|
|
|
side: ws.StateServerSide,
|
|
|
|
connChange: &sync.Cond{L: &sync.Mutex{}},
|
|
|
|
handlers: o.handlers,
|
|
|
|
auth: o.auth,
|
|
|
|
header: make(http.Header, 1),
|
|
|
|
remote: &RemoteClient{Name: o.remote},
|
|
|
|
clientPingInterval: clientPingInterval,
|
|
|
|
connPingInterval: connPingInterval,
|
|
|
|
tlsConfig: o.tlsConfig,
|
|
|
|
}
|
|
|
|
if debugPrint {
|
|
|
|
// Random Mux ID
|
|
|
|
c.NextID = rand.Uint64()
|
|
|
|
}
|
Add per connection RPC metrics (#19852)
Provides individual and aggregate stats for each RPC connection.
Example:
```
"rpc": {
"collectedAt": "2024-05-31T14:33:29.1373103+02:00",
"connected": 30,
"disconnected": 0,
"outgoingStreams": 69,
"incomingStreams": 0,
"outgoingBytes": 174822796,
"incomingBytes": 175821566,
"outgoingMessages": 768595,
"incomingMessages": 768589,
"outQueue": 0,
"lastPongTime": "2024-05-31T12:33:28Z",
"byDestination": {
"http://127.0.0.1:9001": {
"collectedAt": "2024-05-31T14:33:29.1373103+02:00",
"connected": 5,
"disconnected": 0,
"outgoingStreams": 2,
"incomingStreams": 0,
"outgoingBytes": 38432543,
"incomingBytes": 66604052,
"outgoingMessages": 229496,
"incomingMessages": 229575,
"outQueue": 0,
"lastPongTime": "2024-05-31T12:33:27Z"
},
"http://127.0.0.1:9002": {
"collectedAt": "2024-05-31T14:33:29.1373103+02:00",
"connected": 5,
"disconnected": 0,
"outgoingStreams": 6,
"incomingStreams": 0,
"outgoingBytes": 38215680,
"incomingBytes": 66121283,
"outgoingMessages": 228525,
"incomingMessages": 228510,
"outQueue": 0,
"lastPongTime": "2024-05-31T12:33:27Z"
},
...
```
2024-06-01 01:16:24 -04:00
|
|
|
|
|
|
|
// Record per connection stats.
|
|
|
|
c.outgoingBytes = func(n int64) {
|
|
|
|
if o.outgoingBytes != nil {
|
|
|
|
o.outgoingBytes(n)
|
|
|
|
}
|
|
|
|
c.outBytes.Add(n)
|
|
|
|
}
|
|
|
|
c.incomingBytes = func(n int64) {
|
|
|
|
if o.incomingBytes != nil {
|
|
|
|
o.incomingBytes(n)
|
|
|
|
}
|
|
|
|
c.inBytes.Add(n)
|
|
|
|
}
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
if !strings.HasPrefix(o.remote, "https://") && !strings.HasPrefix(o.remote, "wss://") {
|
|
|
|
c.baseFlags |= FlagCRCxxh3
|
|
|
|
}
|
|
|
|
if !strings.HasPrefix(o.local, "https://") && !strings.HasPrefix(o.local, "wss://") {
|
|
|
|
c.baseFlags |= FlagCRCxxh3
|
|
|
|
}
|
|
|
|
if o.publisher != nil {
|
|
|
|
c.traceRequests(o.publisher)
|
|
|
|
}
|
|
|
|
if o.local == o.remote {
|
|
|
|
panic("equal hosts")
|
|
|
|
}
|
|
|
|
if c.shouldConnect() {
|
|
|
|
c.side = ws.StateClientSide
|
|
|
|
|
|
|
|
go func() {
|
|
|
|
if o.blockConnect != nil {
|
|
|
|
<-o.blockConnect
|
|
|
|
}
|
|
|
|
c.connect()
|
|
|
|
}()
|
|
|
|
}
|
|
|
|
if debugPrint {
|
|
|
|
fmt.Println(c.Local, "->", c.Remote, "Should local connect:", c.shouldConnect(), "side:", c.side)
|
|
|
|
}
|
|
|
|
if debugReqs {
|
|
|
|
fmt.Println("Created connection", c.String())
|
|
|
|
}
|
|
|
|
return c
|
|
|
|
}
|
|
|
|
|
|
|
|
// Subroute returns a static subroute for the connection.
|
|
|
|
func (c *Connection) Subroute(s string) *Subroute {
|
|
|
|
if c == nil {
|
|
|
|
return nil
|
|
|
|
}
|
|
|
|
return &Subroute{
|
|
|
|
Connection: c,
|
|
|
|
route: s,
|
|
|
|
subID: makeSubHandlerID(0, s),
|
|
|
|
trace: c.trace.subroute(s),
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
// Subroute adds a subroute to the subroute.
|
|
|
|
// The subroutes are combined with '/'.
|
|
|
|
func (c *Subroute) Subroute(s string) *Subroute {
|
|
|
|
route := strings.Join([]string{c.route, s}, "/")
|
|
|
|
return &Subroute{
|
|
|
|
Connection: c.Connection,
|
|
|
|
route: route,
|
|
|
|
subID: makeSubHandlerID(0, route),
|
|
|
|
trace: c.trace.subroute(route),
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
// newMuxClient returns a mux client for manual use.
|
|
|
|
func (c *Connection) newMuxClient(ctx context.Context) (*muxClient, error) {
|
|
|
|
client := newMuxClient(ctx, atomic.AddUint64(&c.NextID, 1), c)
|
|
|
|
if dl, ok := ctx.Deadline(); ok {
|
|
|
|
client.deadline = getDeadline(time.Until(dl))
|
|
|
|
if client.deadline == 0 {
|
2024-02-02 18:31:06 -05:00
|
|
|
client.cancelFn(context.DeadlineExceeded)
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
return nil, context.DeadlineExceeded
|
|
|
|
}
|
|
|
|
}
|
|
|
|
for {
|
|
|
|
// Handle the extremely unlikely scenario that we wrapped.
|
|
|
|
if _, loaded := c.outgoing.LoadOrStore(client.MuxID, client); client.MuxID != 0 && !loaded {
|
|
|
|
if debugReqs {
|
|
|
|
_, found := c.outgoing.Load(client.MuxID)
|
|
|
|
fmt.Println(client.MuxID, c.String(), "Connection.newMuxClient: RELOADED MUX. loaded:", loaded, "found:", found)
|
|
|
|
}
|
|
|
|
return client, nil
|
|
|
|
}
|
|
|
|
client.MuxID = atomic.AddUint64(&c.NextID, 1)
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
// newMuxClient returns a mux client for manual use.
|
|
|
|
func (c *Subroute) newMuxClient(ctx context.Context) (*muxClient, error) {
|
|
|
|
cl, err := c.Connection.newMuxClient(ctx)
|
|
|
|
if err != nil {
|
|
|
|
return nil, err
|
|
|
|
}
|
|
|
|
cl.subroute = &c.subID
|
|
|
|
return cl, nil
|
|
|
|
}
|
|
|
|
|
|
|
|
// Request allows to do a single remote request.
|
|
|
|
// 'req' will not be used after the call and caller can reuse.
|
|
|
|
// If no deadline is set on ctx, a 1-minute deadline will be added.
|
|
|
|
func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error) {
|
|
|
|
if !h.valid() {
|
|
|
|
return nil, ErrUnknownHandler
|
|
|
|
}
|
|
|
|
if c.State() != StateConnected {
|
|
|
|
return nil, ErrDisconnected
|
|
|
|
}
|
2023-12-01 03:18:04 -05:00
|
|
|
// Create mux client and call.
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
client, err := c.newMuxClient(ctx)
|
|
|
|
if err != nil {
|
|
|
|
return nil, err
|
|
|
|
}
|
|
|
|
defer func() {
|
|
|
|
if debugReqs {
|
|
|
|
_, ok := c.outgoing.Load(client.MuxID)
|
|
|
|
fmt.Println(client.MuxID, c.String(), "Connection.Request: DELETING MUX. Exists:", ok)
|
|
|
|
}
|
2024-02-02 18:31:06 -05:00
|
|
|
client.cancelFn(context.Canceled)
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
c.outgoing.Delete(client.MuxID)
|
|
|
|
}()
|
2023-11-26 04:32:59 -05:00
|
|
|
return client.traceRoundtrip(ctx, c.trace, h, req)
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
}
|
|
|
|
|
|
|
|
// Request allows to do a single remote request.
|
|
|
|
// 'req' will not be used after the call and caller can reuse.
|
|
|
|
// If no deadline is set on ctx, a 1-minute deadline will be added.
|
|
|
|
func (c *Subroute) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error) {
|
|
|
|
if !h.valid() {
|
|
|
|
return nil, ErrUnknownHandler
|
|
|
|
}
|
|
|
|
if c.State() != StateConnected {
|
|
|
|
return nil, ErrDisconnected
|
|
|
|
}
|
2023-12-01 03:18:04 -05:00
|
|
|
// Create mux client and call.
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
client, err := c.newMuxClient(ctx)
|
|
|
|
if err != nil {
|
|
|
|
return nil, err
|
|
|
|
}
|
|
|
|
client.subroute = &c.subID
|
|
|
|
defer func() {
|
|
|
|
if debugReqs {
|
|
|
|
fmt.Println(client.MuxID, c.String(), "Subroute.Request: DELETING MUX")
|
|
|
|
}
|
2024-02-06 16:35:16 -05:00
|
|
|
client.cancelFn(context.Canceled)
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
c.outgoing.Delete(client.MuxID)
|
|
|
|
}()
|
2023-11-26 04:32:59 -05:00
|
|
|
return client.traceRoundtrip(ctx, c.trace, h, req)
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
}
|
|
|
|
|
|
|
|
// NewStream creates a new stream.
|
|
|
|
// Initial payload can be reused by the caller.
|
|
|
|
func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error) {
|
|
|
|
if !h.valid() {
|
|
|
|
return nil, ErrUnknownHandler
|
|
|
|
}
|
|
|
|
if c.State() != StateConnected {
|
|
|
|
return nil, ErrDisconnected
|
|
|
|
}
|
|
|
|
handler := c.handlers.streams[h]
|
|
|
|
if handler == nil {
|
|
|
|
return nil, ErrUnknownHandler
|
|
|
|
}
|
|
|
|
|
|
|
|
var requests chan []byte
|
|
|
|
var responses chan Response
|
|
|
|
if handler.InCapacity > 0 {
|
|
|
|
requests = make(chan []byte, handler.InCapacity)
|
|
|
|
}
|
|
|
|
if handler.OutCapacity > 0 {
|
|
|
|
responses = make(chan Response, handler.OutCapacity)
|
|
|
|
} else {
|
|
|
|
responses = make(chan Response, 1)
|
|
|
|
}
|
|
|
|
|
|
|
|
cl, err := c.newMuxClient(ctx)
|
|
|
|
if err != nil {
|
|
|
|
return nil, err
|
|
|
|
}
|
|
|
|
|
|
|
|
return cl.RequestStream(h, payload, requests, responses)
|
|
|
|
}
|
|
|
|
|
|
|
|
// NewStream creates a new stream.
|
|
|
|
// Initial payload can be reused by the caller.
|
|
|
|
func (c *Subroute) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error) {
|
|
|
|
if !h.valid() {
|
|
|
|
return nil, ErrUnknownHandler
|
|
|
|
}
|
|
|
|
if c.State() != StateConnected {
|
|
|
|
return nil, ErrDisconnected
|
|
|
|
}
|
|
|
|
handler := c.handlers.subStreams[makeZeroSubHandlerID(h)]
|
|
|
|
if handler == nil {
|
|
|
|
if debugPrint {
|
|
|
|
fmt.Println("want", makeZeroSubHandlerID(h), c.route, "got", c.handlers.subStreams)
|
|
|
|
}
|
|
|
|
return nil, ErrUnknownHandler
|
|
|
|
}
|
|
|
|
|
|
|
|
var requests chan []byte
|
|
|
|
var responses chan Response
|
|
|
|
if handler.InCapacity > 0 {
|
|
|
|
requests = make(chan []byte, handler.InCapacity)
|
|
|
|
}
|
|
|
|
if handler.OutCapacity > 0 {
|
|
|
|
responses = make(chan Response, handler.OutCapacity)
|
|
|
|
} else {
|
|
|
|
responses = make(chan Response, 1)
|
|
|
|
}
|
|
|
|
|
|
|
|
cl, err := c.newMuxClient(ctx)
|
|
|
|
if err != nil {
|
|
|
|
return nil, err
|
|
|
|
}
|
|
|
|
cl.subroute = &c.subID
|
|
|
|
|
|
|
|
return cl.RequestStream(h, payload, requests, responses)
|
|
|
|
}
|
|
|
|
|
|
|
|
// WaitForConnect will block until a connection has been established or
|
|
|
|
// the context is canceled, in which case the context error is returned.
|
|
|
|
func (c *Connection) WaitForConnect(ctx context.Context) error {
|
|
|
|
if debugPrint {
|
|
|
|
fmt.Println(c.Local, "->", c.Remote, "WaitForConnect")
|
|
|
|
defer fmt.Println(c.Local, "->", c.Remote, "WaitForConnect done")
|
|
|
|
}
|
|
|
|
c.connChange.L.Lock()
|
|
|
|
if atomic.LoadUint32((*uint32)(&c.state)) == StateConnected {
|
|
|
|
c.connChange.L.Unlock()
|
|
|
|
// Happy path.
|
|
|
|
return nil
|
|
|
|
}
|
|
|
|
ctx, cancel := context.WithCancel(ctx)
|
|
|
|
defer cancel()
|
|
|
|
changed := make(chan State, 1)
|
|
|
|
go func() {
|
2024-01-28 13:04:17 -05:00
|
|
|
defer xioutil.SafeClose(changed)
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
for {
|
|
|
|
c.connChange.Wait()
|
|
|
|
newState := c.State()
|
|
|
|
select {
|
|
|
|
case changed <- newState:
|
|
|
|
if newState == StateConnected || newState == StateShutdown {
|
|
|
|
c.connChange.L.Unlock()
|
|
|
|
return
|
|
|
|
}
|
|
|
|
case <-ctx.Done():
|
|
|
|
c.connChange.L.Unlock()
|
|
|
|
return
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}()
|
|
|
|
|
|
|
|
for {
|
|
|
|
select {
|
|
|
|
case <-ctx.Done():
|
|
|
|
return context.Cause(ctx)
|
|
|
|
case newState := <-changed:
|
|
|
|
if newState == StateConnected {
|
|
|
|
return nil
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
var ErrDone = errors.New("done for now")
|
|
|
|
|
|
|
|
var ErrRemoteRestart = errors.New("remote restarted")
|
|
|
|
|
|
|
|
|
|
|
|
// Stateless connects to the remote handler and return all packets sent back.
|
|
|
|
// If the remote is restarted will return ErrRemoteRestart.
|
|
|
|
// If nil will be returned remote call sent EOF or ErrDone is returned by the callback.
|
|
|
|
// If ErrDone is returned on cb nil will be returned.
|
|
|
|
func (c *Connection) Stateless(ctx context.Context, h HandlerID, req []byte, cb func([]byte) error) error {
|
|
|
|
client, err := c.newMuxClient(ctx)
|
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
defer c.outgoing.Delete(client.MuxID)
|
|
|
|
resp := make(chan Response, 10)
|
|
|
|
client.RequestStateless(h, req, resp)
|
|
|
|
|
|
|
|
for r := range resp {
|
|
|
|
if r.Err != nil {
|
|
|
|
return r.Err
|
|
|
|
}
|
|
|
|
if len(r.Msg) > 0 {
|
|
|
|
err := cb(r.Msg)
|
|
|
|
if err != nil {
|
|
|
|
if errors.Is(err, ErrDone) {
|
|
|
|
break
|
|
|
|
}
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return nil
|
|
|
|
}
|
|
|
|
*/
|
|
|
|
|
|
|
|
// shouldConnect returns a deterministic bool whether the local should initiate the connection.
|
|
|
|
// It should be 50% chance of any host initiating the connection.
|
|
|
|
func (c *Connection) shouldConnect() bool {
|
|
|
|
// The remote should have the opposite result.
|
|
|
|
h0 := xxh3.HashString(c.Local + c.Remote)
|
|
|
|
h1 := xxh3.HashString(c.Remote + c.Local)
|
|
|
|
if h0 == h1 {
|
|
|
|
return c.Local < c.Remote
|
|
|
|
}
|
|
|
|
return h0 < h1
|
|
|
|
}
|
|
|
|
|
2024-02-21 10:49:34 -05:00
|
|
|
func (c *Connection) send(ctx context.Context, msg []byte) error {
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
select {
|
2024-02-21 10:49:34 -05:00
|
|
|
case <-ctx.Done():
|
|
|
|
// Returning error here is too noisy.
|
|
|
|
return nil
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
case c.outQueue <- msg:
|
|
|
|
return nil
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
// queueMsg queues a message, with an optional payload.
|
|
|
|
// sender should not reference msg.Payload
|
|
|
|
func (c *Connection) queueMsg(msg message, payload sender) error {
|
2023-11-28 14:22:29 -05:00
|
|
|
// Add baseflags.
|
|
|
|
msg.Flags.Set(c.baseFlags)
|
|
|
|
// This cannot encode subroute.
|
|
|
|
msg.Flags.Clear(FlagSubroute)
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
if payload != nil {
|
2024-04-01 19:42:09 -04:00
|
|
|
if sz := payload.Msgsize(); cap(msg.Payload) < sz {
|
|
|
|
PutByteBuffer(msg.Payload)
|
|
|
|
msg.Payload = GetByteBufferCap(sz)
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
}
|
|
|
|
var err error
|
|
|
|
msg.Payload, err = payload.MarshalMsg(msg.Payload[:0])
|
|
|
|
msg.Op = payload.Op()
|
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
}
|
|
|
|
defer PutByteBuffer(msg.Payload)
|
2024-04-01 19:42:09 -04:00
|
|
|
dst := GetByteBufferCap(msg.Msgsize())
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
dst, err := msg.MarshalMsg(dst)
|
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
if msg.Flags&FlagCRCxxh3 != 0 {
|
|
|
|
h := xxh3.Hash(dst)
|
|
|
|
dst = binary.LittleEndian.AppendUint32(dst, uint32(h))
|
|
|
|
}
|
2024-02-21 10:49:34 -05:00
|
|
|
return c.send(c.ctx, dst)
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
}
|
|
|
|
|
|
|
|
// sendMsg will send
|
|
|
|
func (c *Connection) sendMsg(conn net.Conn, msg message, payload msgp.MarshalSizer) error {
|
|
|
|
if payload != nil {
|
2024-04-01 19:42:09 -04:00
|
|
|
if sz := payload.Msgsize(); cap(msg.Payload) < sz {
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
PutByteBuffer(msg.Payload)
|
2024-04-01 19:42:09 -04:00
|
|
|
msg.Payload = GetByteBufferCap(sz)[:0]
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
}
|
|
|
|
var err error
|
|
|
|
msg.Payload, err = payload.MarshalMsg(msg.Payload)
|
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
defer PutByteBuffer(msg.Payload)
|
|
|
|
}
|
2024-04-01 19:42:09 -04:00
|
|
|
dst := GetByteBufferCap(msg.Msgsize())
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
dst, err := msg.MarshalMsg(dst)
|
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
if msg.Flags&FlagCRCxxh3 != 0 {
|
|
|
|
h := xxh3.Hash(dst)
|
|
|
|
dst = binary.LittleEndian.AppendUint32(dst, uint32(h))
|
|
|
|
}
|
|
|
|
if debugPrint {
|
|
|
|
fmt.Println(c.Local, "sendMsg: Sending", msg.Op, "as", len(dst), "bytes")
|
|
|
|
}
|
|
|
|
if c.outgoingBytes != nil {
|
|
|
|
c.outgoingBytes(int64(len(dst)))
|
|
|
|
}
|
2024-02-06 16:34:46 -05:00
|
|
|
err = conn.SetWriteDeadline(time.Now().Add(connWriteTimeout))
|
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
return wsutil.WriteMessage(conn, c.side, ws.OpBinary, dst)
|
|
|
|
}
|
|
|
|
|
|
|
|
func (c *Connection) connect() {
|
|
|
|
c.updateState(StateConnecting)
|
|
|
|
rng := rand.New(rand.NewSource(time.Now().UnixNano()))
|
|
|
|
// Runs until the server is shut down.
|
|
|
|
for {
|
|
|
|
if c.State() == StateShutdown {
|
|
|
|
return
|
|
|
|
}
|
|
|
|
toDial := strings.Replace(c.Remote, "http://", "ws://", 1)
|
|
|
|
toDial = strings.Replace(toDial, "https://", "wss://", 1)
|
|
|
|
toDial += RoutePath
|
|
|
|
|
|
|
|
dialer := ws.DefaultDialer
|
|
|
|
dialer.ReadBufferSize = readBufferSize
|
|
|
|
dialer.WriteBufferSize = writeBufferSize
|
|
|
|
dialer.Timeout = defaultDialTimeout
|
|
|
|
if c.dialer != nil {
|
|
|
|
dialer.NetDial = c.dialer.DialContext
|
|
|
|
}
|
|
|
|
if c.header == nil {
|
|
|
|
c.header = make(http.Header, 2)
|
|
|
|
}
|
|
|
|
c.header.Set("Authorization", "Bearer "+c.auth(""))
|
|
|
|
c.header.Set("X-Minio-Time", time.Now().UTC().Format(time.RFC3339))
|
|
|
|
|
|
|
|
if len(c.header) > 0 {
|
|
|
|
dialer.Header = ws.HandshakeHeaderHTTP(c.header)
|
|
|
|
}
|
|
|
|
dialer.TLSConfig = c.tlsConfig
|
|
|
|
dialStarted := time.Now()
|
|
|
|
if debugPrint {
|
|
|
|
fmt.Println(c.Local, "Connecting to ", toDial)
|
|
|
|
}
|
|
|
|
conn, br, _, err := dialer.Dial(c.ctx, toDial)
|
|
|
|
if br != nil {
|
|
|
|
ws.PutReader(br)
|
|
|
|
}
|
|
|
|
c.connMu.Lock()
|
|
|
|
c.debugOutConn = conn
|
|
|
|
c.connMu.Unlock()
|
|
|
|
retry := func(err error) {
|
|
|
|
if debugPrint {
|
|
|
|
fmt.Printf("%v Connecting to %v: %v. Retrying.\n", c.Local, toDial, err)
|
|
|
|
}
|
|
|
|
sleep := defaultDialTimeout + time.Duration(rng.Int63n(int64(defaultDialTimeout)))
|
2024-02-08 14:21:21 -05:00
|
|
|
next := dialStarted.Add(sleep / 2)
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
sleep = time.Until(next).Round(time.Millisecond)
|
|
|
|
if sleep < 0 {
|
|
|
|
sleep = 0
|
|
|
|
}
|
|
|
|
gotState := c.State()
|
|
|
|
if gotState == StateShutdown {
|
|
|
|
return
|
|
|
|
}
|
|
|
|
if gotState != StateConnecting {
|
2024-05-22 19:07:14 -04:00
|
|
|
// Don't print error on first attempt, and after that only once per hour.
|
|
|
|
gridLogOnceIf(c.ctx, fmt.Errorf("grid: %s re-connecting to %s: %w (%T) Sleeping %v (%v)", c.Local, toDial, err, err, sleep, gotState), toDial)
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
}
|
|
|
|
c.updateState(StateConnectionError)
|
|
|
|
time.Sleep(sleep)
|
|
|
|
}
|
|
|
|
if err != nil {
|
|
|
|
retry(err)
|
|
|
|
continue
|
|
|
|
}
|
|
|
|
// Send connect message.
|
|
|
|
m := message{
|
|
|
|
Op: OpConnect,
|
|
|
|
}
|
|
|
|
req := connectReq{
|
|
|
|
Host: c.Local,
|
|
|
|
ID: c.id,
|
|
|
|
}
|
|
|
|
err = c.sendMsg(conn, m, &req)
|
|
|
|
if err != nil {
|
|
|
|
retry(err)
|
|
|
|
continue
|
|
|
|
}
|
|
|
|
// Wait for response
|
|
|
|
var r connectResp
|
|
|
|
err = c.receive(conn, &r)
|
|
|
|
if err != nil {
|
|
|
|
if debugPrint {
|
|
|
|
fmt.Println(c.Local, "receive err:", err, "side:", c.side)
|
|
|
|
}
|
|
|
|
retry(err)
|
|
|
|
continue
|
|
|
|
}
|
|
|
|
if debugPrint {
|
|
|
|
fmt.Println(c.Local, "Got connectResp:", r)
|
|
|
|
}
|
|
|
|
if !r.Accepted {
|
|
|
|
retry(fmt.Errorf("connection rejected: %s", r.RejectedReason))
|
|
|
|
continue
|
|
|
|
}
|
2024-01-24 14:49:39 -05:00
|
|
|
c.reconnectMu.Lock()
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
remoteUUID := uuid.UUID(r.ID)
|
|
|
|
if c.remoteID != nil {
|
|
|
|
c.reconnected()
|
|
|
|
}
|
|
|
|
c.remoteID = &remoteUUID
|
|
|
|
if debugPrint {
|
|
|
|
fmt.Println(c.Local, "Connected Waiting for Messages")
|
|
|
|
}
|
2024-01-28 11:46:15 -05:00
|
|
|
// Handle messages...
|
|
|
|
c.handleMessages(c.ctx, conn)
|
|
|
|
// Reconnect unless we are shutting down (debug only).
|
|
|
|
if c.State() == StateShutdown {
|
|
|
|
conn.Close()
|
|
|
|
return
|
|
|
|
}
|
|
|
|
if debugPrint {
|
|
|
|
fmt.Println(c.Local, "Disconnected. Attempting to reconnect.")
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
func (c *Connection) disconnected() {
|
|
|
|
c.outgoing.Range(func(key uint64, client *muxClient) bool {
|
|
|
|
if !client.stateless {
|
|
|
|
client.cancelFn(ErrDisconnected)
|
|
|
|
}
|
|
|
|
return true
|
|
|
|
})
|
|
|
|
if debugReqs {
|
|
|
|
fmt.Println(c.String(), "Disconnected. Clearing outgoing.")
|
|
|
|
}
|
|
|
|
c.outgoing.Clear()
|
|
|
|
c.inStream.Range(func(key uint64, client *muxServer) bool {
|
|
|
|
client.cancel()
|
|
|
|
return true
|
|
|
|
})
|
|
|
|
c.inStream.Clear()
|
|
|
|
}
|
|
|
|
|
|
|
|
func (c *Connection) receive(conn net.Conn, r receiver) error {
|
|
|
|
b, op, err := wsutil.ReadData(conn, c.side)
|
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
if op != ws.OpBinary {
|
|
|
|
return fmt.Errorf("unexpected connect response type %v", op)
|
|
|
|
}
|
2024-01-27 03:25:49 -05:00
|
|
|
if c.incomingBytes != nil {
|
|
|
|
c.incomingBytes(int64(len(b)))
|
|
|
|
}
|
|
|
|
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
var m message
|
|
|
|
_, _, err = m.parse(b)
|
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
if m.Op != r.Op() {
|
|
|
|
return fmt.Errorf("unexpected response OP, want %v, got %v", r.Op(), m.Op)
|
|
|
|
}
|
|
|
|
_, err = r.UnmarshalMsg(m.Payload)
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
|
|
|
|
func (c *Connection) handleIncoming(ctx context.Context, conn net.Conn, req connectReq) error {
|
|
|
|
c.connMu.Lock()
|
|
|
|
c.debugInConn = conn
|
|
|
|
c.connMu.Unlock()
|
|
|
|
if c.blockConnect != nil {
|
|
|
|
// Block until we are allowed to connect.
|
|
|
|
<-c.blockConnect
|
|
|
|
}
|
|
|
|
if req.Host != c.Remote {
|
|
|
|
err := fmt.Errorf("expected remote '%s', got '%s'", c.Remote, req.Host)
|
|
|
|
if debugPrint {
|
|
|
|
fmt.Println(err)
|
|
|
|
}
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
if c.shouldConnect() {
|
|
|
|
if debugPrint {
|
|
|
|
fmt.Println("expected to be client side, not server side")
|
|
|
|
}
|
2024-01-19 13:35:24 -05:00
|
|
|
return errors.New("grid: expected to be client side, not server side")
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
}
|
|
|
|
msg := message{
|
|
|
|
Op: OpConnectResponse,
|
|
|
|
}
|
|
|
|
|
|
|
|
resp := connectResp{
|
|
|
|
ID: c.id,
|
|
|
|
Accepted: true,
|
|
|
|
}
|
|
|
|
err := c.sendMsg(conn, msg, &resp)
|
|
|
|
if debugPrint {
|
|
|
|
fmt.Printf("grid: Queued Response %+v Side: %v\n", resp, c.side)
|
|
|
|
}
|
2024-01-24 14:49:39 -05:00
|
|
|
if err != nil {
|
|
|
|
return err
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
}
|
2024-01-24 14:49:39 -05:00
|
|
|
// Signal that we are reconnected, update state and handle messages.
|
|
|
|
// Prevent other connections from connecting while we process.
|
|
|
|
c.reconnectMu.Lock()
|
|
|
|
if c.remoteID != nil {
|
|
|
|
c.reconnected()
|
|
|
|
}
|
|
|
|
rid := uuid.UUID(req.ID)
|
|
|
|
c.remoteID = &rid
|
|
|
|
|
2024-01-28 11:46:15 -05:00
|
|
|
// Handle incoming messages until disconnect.
|
2024-01-24 14:49:39 -05:00
|
|
|
c.handleMessages(ctx, conn)
|
|
|
|
return nil
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
}
|
|
|
|
|
2024-01-24 14:49:39 -05:00
|
|
|
// reconnected signals the connection has been reconnected.
|
|
|
|
// It will close all active requests and streams.
|
|
|
|
// caller *must* hold reconnectMu.
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
func (c *Connection) reconnected() {
|
|
|
|
c.updateState(StateConnectionError)
|
|
|
|
// Close all active requests.
|
|
|
|
if debugReqs {
|
|
|
|
fmt.Println(c.String(), "Reconnected. Clearing outgoing.")
|
|
|
|
}
|
|
|
|
c.outgoing.Range(func(key uint64, client *muxClient) bool {
|
|
|
|
client.close()
|
|
|
|
return true
|
|
|
|
})
|
|
|
|
c.inStream.Range(func(key uint64, value *muxServer) bool {
|
|
|
|
value.close()
|
|
|
|
return true
|
|
|
|
})
|
|
|
|
|
|
|
|
c.inStream.Clear()
|
|
|
|
c.outgoing.Clear()
|
|
|
|
|
|
|
|
// Wait for existing to exit
|
|
|
|
c.handleMsgWg.Wait()
|
|
|
|
}
|
|
|
|
|
|
|
|
func (c *Connection) updateState(s State) {
|
|
|
|
c.connChange.L.Lock()
|
|
|
|
defer c.connChange.L.Unlock()
|
|
|
|
|
|
|
|
// We may have reads that aren't locked, so update atomically.
|
|
|
|
gotState := atomic.LoadUint32((*uint32)(&c.state))
|
|
|
|
if gotState == StateShutdown || State(gotState) == s {
|
|
|
|
return
|
|
|
|
}
|
|
|
|
if s == StateConnected {
|
2024-06-07 11:51:52 -04:00
|
|
|
atomic.StoreInt64(&c.LastPong, time.Now().UnixNano())
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
}
|
|
|
|
atomic.StoreUint32((*uint32)(&c.state), uint32(s))
|
|
|
|
if debugPrint {
|
|
|
|
fmt.Println(c.Local, "updateState:", gotState, "->", s)
|
|
|
|
}
|
|
|
|
c.connChange.Broadcast()
|
|
|
|
}
|
|
|
|
|
2024-01-28 11:46:15 -05:00
|
|
|
// monitorState will monitor the state of the connection and close the net.Conn if it changes.
|
|
|
|
func (c *Connection) monitorState(conn net.Conn, cancel context.CancelCauseFunc) {
|
|
|
|
c.connChange.L.Lock()
|
|
|
|
defer c.connChange.L.Unlock()
|
|
|
|
for {
|
|
|
|
newState := c.State()
|
|
|
|
if newState != StateConnected {
|
|
|
|
conn.Close()
|
|
|
|
cancel(ErrDisconnected)
|
|
|
|
return
|
|
|
|
}
|
|
|
|
// Unlock and wait for state change.
|
|
|
|
c.connChange.Wait()
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2024-01-24 14:49:39 -05:00
|
|
|
// handleMessages will handle incoming messages on conn.
|
|
|
|
// caller *must* hold reconnectMu.
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
func (c *Connection) handleMessages(ctx context.Context, conn net.Conn) {
|
2024-01-28 11:46:15 -05:00
|
|
|
c.updateState(StateConnected)
|
|
|
|
ctx, cancel := context.WithCancelCause(ctx)
|
|
|
|
defer cancel(ErrDisconnected)
|
|
|
|
|
|
|
|
// This will ensure that is something asks to disconnect and we are blocked on reads/writes
|
|
|
|
// the connection will be closed and readers/writers will unblock.
|
|
|
|
go c.monitorState(conn, cancel)
|
|
|
|
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
c.handleMsgWg.Add(2)
|
2024-01-24 14:49:39 -05:00
|
|
|
c.reconnectMu.Unlock()
|
2024-01-28 11:46:15 -05:00
|
|
|
|
2024-01-24 14:49:39 -05:00
|
|
|
// Read goroutine
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
go func() {
|
|
|
|
defer func() {
|
|
|
|
if rec := recover(); rec != nil {
|
2024-04-04 08:04:40 -04:00
|
|
|
gridLogIf(ctx, fmt.Errorf("handleMessages: panic recovered: %v", rec))
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
debug.PrintStack()
|
|
|
|
}
|
|
|
|
c.connChange.L.Lock()
|
|
|
|
if atomic.CompareAndSwapUint32((*uint32)(&c.state), StateConnected, StateConnectionError) {
|
|
|
|
c.connChange.Broadcast()
|
|
|
|
}
|
|
|
|
c.connChange.L.Unlock()
|
|
|
|
conn.Close()
|
|
|
|
c.handleMsgWg.Done()
|
|
|
|
}()
|
|
|
|
|
|
|
|
controlHandler := wsutil.ControlFrameHandler(conn, c.side)
|
|
|
|
wsReader := wsutil.Reader{
|
|
|
|
Source: conn,
|
|
|
|
State: c.side,
|
|
|
|
CheckUTF8: true,
|
|
|
|
SkipHeaderCheck: false,
|
|
|
|
OnIntermediate: controlHandler,
|
|
|
|
}
|
|
|
|
readDataInto := func(dst []byte, rw io.ReadWriter, s ws.State, want ws.OpCode) ([]byte, error) {
|
|
|
|
dst = dst[:0]
|
|
|
|
for {
|
|
|
|
hdr, err := wsReader.NextFrame()
|
|
|
|
if err != nil {
|
|
|
|
return nil, err
|
|
|
|
}
|
|
|
|
if hdr.OpCode.IsControl() {
|
|
|
|
if err := controlHandler(hdr, &wsReader); err != nil {
|
|
|
|
return nil, err
|
|
|
|
}
|
|
|
|
continue
|
|
|
|
}
|
|
|
|
if hdr.OpCode&want == 0 {
|
|
|
|
if err := wsReader.Discard(); err != nil {
|
|
|
|
return nil, err
|
|
|
|
}
|
|
|
|
continue
|
|
|
|
}
|
|
|
|
if int64(cap(dst)) < hdr.Length+1 {
|
|
|
|
dst = make([]byte, 0, hdr.Length+hdr.Length>>3)
|
|
|
|
}
|
|
|
|
return readAllInto(dst[:0], &wsReader)
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
// Keep reusing the same buffer.
|
|
|
|
var msg []byte
|
|
|
|
for {
|
|
|
|
if atomic.LoadUint32((*uint32)(&c.state)) != StateConnected {
|
|
|
|
cancel(ErrDisconnected)
|
|
|
|
return
|
|
|
|
}
|
2024-02-08 14:21:21 -05:00
|
|
|
if cap(msg) > readBufferSize*4 {
|
2024-01-17 14:47:42 -05:00
|
|
|
// Don't keep too much memory around.
|
|
|
|
msg = nil
|
|
|
|
}
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
|
|
|
|
var err error
|
|
|
|
msg, err = readDataInto(msg, conn, c.side, ws.OpBinary)
|
|
|
|
if err != nil {
|
|
|
|
cancel(ErrDisconnected)
|
2024-05-22 19:07:14 -04:00
|
|
|
if !xnet.IsNetworkOrHostDown(err, true) {
|
|
|
|
gridLogIfNot(ctx, fmt.Errorf("ws read: %w", err), net.ErrClosed, io.EOF)
|
|
|
|
}
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
return
|
|
|
|
}
|
2024-06-07 11:51:52 -04:00
|
|
|
block := c.blockMessages.Load()
|
|
|
|
if block != nil && *block != nil {
|
|
|
|
<-*block
|
|
|
|
}
|
|
|
|
|
2024-01-28 17:35:53 -05:00
|
|
|
if c.incomingBytes != nil {
|
|
|
|
c.incomingBytes(int64(len(msg)))
|
|
|
|
}
|
|
|
|
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
// Parse the received message
|
|
|
|
var m message
|
|
|
|
subID, remain, err := m.parse(msg)
|
|
|
|
if err != nil {
|
2024-05-22 19:07:14 -04:00
|
|
|
if !xnet.IsNetworkOrHostDown(err, true) {
|
|
|
|
gridLogIf(ctx, fmt.Errorf("ws parse package: %w", err))
|
|
|
|
}
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
cancel(ErrDisconnected)
|
|
|
|
return
|
|
|
|
}
|
|
|
|
if debugPrint {
|
|
|
|
fmt.Printf("%s Got msg: %v\n", c.Local, m)
|
|
|
|
}
|
|
|
|
if m.Op != OpMerged {
|
Add per connection RPC metrics (#19852)
Provides individual and aggregate stats for each RPC connection.
Example:
```
"rpc": {
"collectedAt": "2024-05-31T14:33:29.1373103+02:00",
"connected": 30,
"disconnected": 0,
"outgoingStreams": 69,
"incomingStreams": 0,
"outgoingBytes": 174822796,
"incomingBytes": 175821566,
"outgoingMessages": 768595,
"incomingMessages": 768589,
"outQueue": 0,
"lastPongTime": "2024-05-31T12:33:28Z",
"byDestination": {
"http://127.0.0.1:9001": {
"collectedAt": "2024-05-31T14:33:29.1373103+02:00",
"connected": 5,
"disconnected": 0,
"outgoingStreams": 2,
"incomingStreams": 0,
"outgoingBytes": 38432543,
"incomingBytes": 66604052,
"outgoingMessages": 229496,
"incomingMessages": 229575,
"outQueue": 0,
"lastPongTime": "2024-05-31T12:33:27Z"
},
"http://127.0.0.1:9002": {
"collectedAt": "2024-05-31T14:33:29.1373103+02:00",
"connected": 5,
"disconnected": 0,
"outgoingStreams": 6,
"incomingStreams": 0,
"outgoingBytes": 38215680,
"incomingBytes": 66121283,
"outgoingMessages": 228525,
"incomingMessages": 228510,
"outQueue": 0,
"lastPongTime": "2024-05-31T12:33:27Z"
},
...
```
2024-06-01 01:16:24 -04:00
|
|
|
c.inMessages.Add(1)
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
c.handleMsg(ctx, m, subID)
|
|
|
|
continue
|
|
|
|
}
|
|
|
|
// Handle merged messages.
|
|
|
|
messages := int(m.Seq)
|
Add per connection RPC metrics (#19852)
Provides individual and aggregate stats for each RPC connection.
Example:
```
"rpc": {
"collectedAt": "2024-05-31T14:33:29.1373103+02:00",
"connected": 30,
"disconnected": 0,
"outgoingStreams": 69,
"incomingStreams": 0,
"outgoingBytes": 174822796,
"incomingBytes": 175821566,
"outgoingMessages": 768595,
"incomingMessages": 768589,
"outQueue": 0,
"lastPongTime": "2024-05-31T12:33:28Z",
"byDestination": {
"http://127.0.0.1:9001": {
"collectedAt": "2024-05-31T14:33:29.1373103+02:00",
"connected": 5,
"disconnected": 0,
"outgoingStreams": 2,
"incomingStreams": 0,
"outgoingBytes": 38432543,
"incomingBytes": 66604052,
"outgoingMessages": 229496,
"incomingMessages": 229575,
"outQueue": 0,
"lastPongTime": "2024-05-31T12:33:27Z"
},
"http://127.0.0.1:9002": {
"collectedAt": "2024-05-31T14:33:29.1373103+02:00",
"connected": 5,
"disconnected": 0,
"outgoingStreams": 6,
"incomingStreams": 0,
"outgoingBytes": 38215680,
"incomingBytes": 66121283,
"outgoingMessages": 228525,
"incomingMessages": 228510,
"outQueue": 0,
"lastPongTime": "2024-05-31T12:33:27Z"
},
...
```
2024-06-01 01:16:24 -04:00
|
|
|
c.inMessages.Add(int64(messages))
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
for i := 0; i < messages; i++ {
|
|
|
|
if atomic.LoadUint32((*uint32)(&c.state)) != StateConnected {
|
|
|
|
cancel(ErrDisconnected)
|
|
|
|
return
|
|
|
|
}
|
|
|
|
var next []byte
|
|
|
|
next, remain, err = msgp.ReadBytesZC(remain)
|
|
|
|
if err != nil {
|
2024-05-22 19:07:14 -04:00
|
|
|
if !xnet.IsNetworkOrHostDown(err, true) {
|
|
|
|
gridLogIf(ctx, fmt.Errorf("ws read merged: %w", err))
|
|
|
|
}
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
cancel(ErrDisconnected)
|
|
|
|
return
|
|
|
|
}
|
|
|
|
|
|
|
|
m.Payload = nil
|
|
|
|
subID, _, err = m.parse(next)
|
|
|
|
if err != nil {
|
2024-05-22 19:07:14 -04:00
|
|
|
if !xnet.IsNetworkOrHostDown(err, true) {
|
|
|
|
gridLogIf(ctx, fmt.Errorf("ws parse merged: %w", err))
|
|
|
|
}
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
cancel(ErrDisconnected)
|
|
|
|
return
|
|
|
|
}
|
|
|
|
c.handleMsg(ctx, m, subID)
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}()
|
|
|
|
|
|
|
|
// Write function.
|
|
|
|
defer func() {
|
|
|
|
if rec := recover(); rec != nil {
|
2024-04-04 08:04:40 -04:00
|
|
|
gridLogIf(ctx, fmt.Errorf("handleMessages: panic recovered: %v", rec))
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
debug.PrintStack()
|
|
|
|
}
|
|
|
|
if debugPrint {
|
|
|
|
fmt.Println("handleMessages: write goroutine exited")
|
|
|
|
}
|
|
|
|
cancel(ErrDisconnected)
|
|
|
|
c.connChange.L.Lock()
|
|
|
|
if atomic.CompareAndSwapUint32((*uint32)(&c.state), StateConnected, StateConnectionError) {
|
|
|
|
c.connChange.Broadcast()
|
|
|
|
}
|
|
|
|
c.disconnected()
|
|
|
|
c.connChange.L.Unlock()
|
|
|
|
|
|
|
|
conn.Close()
|
|
|
|
c.handleMsgWg.Done()
|
|
|
|
}()
|
|
|
|
|
|
|
|
c.connMu.Lock()
|
|
|
|
connPingInterval := c.connPingInterval
|
|
|
|
c.connMu.Unlock()
|
|
|
|
ping := time.NewTicker(connPingInterval)
|
|
|
|
pingFrame := message{
|
|
|
|
Op: OpPing,
|
|
|
|
DeadlineMS: 5000,
|
|
|
|
}
|
|
|
|
|
|
|
|
defer ping.Stop()
|
|
|
|
queue := make([][]byte, 0, maxMergeMessages)
|
|
|
|
merged := make([]byte, 0, writeBufferSize)
|
|
|
|
var queueSize int
|
|
|
|
var buf bytes.Buffer
|
|
|
|
var wsw wsWriter
|
|
|
|
for {
|
|
|
|
var toSend []byte
|
|
|
|
select {
|
|
|
|
case <-ctx.Done():
|
|
|
|
return
|
|
|
|
case <-ping.C:
|
|
|
|
if c.State() != StateConnected {
|
|
|
|
continue
|
|
|
|
}
|
|
|
|
lastPong := atomic.LoadInt64(&c.LastPong)
|
|
|
|
if lastPong > 0 {
|
2024-06-07 11:51:52 -04:00
|
|
|
lastPongTime := time.Unix(0, lastPong)
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
if d := time.Since(lastPongTime); d > connPingInterval*2 {
|
2024-04-04 08:04:40 -04:00
|
|
|
gridLogIf(ctx, fmt.Errorf("host %s last pong too old (%v); disconnecting", c.Remote, d.Round(time.Millisecond)))
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
return
|
|
|
|
}
|
|
|
|
}
|
|
|
|
var err error
|
|
|
|
toSend, err = pingFrame.MarshalMsg(GetByteBuffer()[:0])
|
|
|
|
if err != nil {
|
2024-04-04 08:04:40 -04:00
|
|
|
gridLogIf(ctx, err)
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
// Fake it...
|
2024-06-07 11:51:52 -04:00
|
|
|
atomic.StoreInt64(&c.LastPong, time.Now().UnixNano())
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
continue
|
|
|
|
}
|
|
|
|
case toSend = <-c.outQueue:
|
|
|
|
if len(toSend) == 0 {
|
|
|
|
continue
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if len(queue) < maxMergeMessages && queueSize+len(toSend) < writeBufferSize-1024 && len(c.outQueue) > 0 {
|
|
|
|
queue = append(queue, toSend)
|
|
|
|
queueSize += len(toSend)
|
|
|
|
continue
|
|
|
|
}
|
Add per connection RPC metrics (#19852)
Provides individual and aggregate stats for each RPC connection.
Example:
```
"rpc": {
"collectedAt": "2024-05-31T14:33:29.1373103+02:00",
"connected": 30,
"disconnected": 0,
"outgoingStreams": 69,
"incomingStreams": 0,
"outgoingBytes": 174822796,
"incomingBytes": 175821566,
"outgoingMessages": 768595,
"incomingMessages": 768589,
"outQueue": 0,
"lastPongTime": "2024-05-31T12:33:28Z",
"byDestination": {
"http://127.0.0.1:9001": {
"collectedAt": "2024-05-31T14:33:29.1373103+02:00",
"connected": 5,
"disconnected": 0,
"outgoingStreams": 2,
"incomingStreams": 0,
"outgoingBytes": 38432543,
"incomingBytes": 66604052,
"outgoingMessages": 229496,
"incomingMessages": 229575,
"outQueue": 0,
"lastPongTime": "2024-05-31T12:33:27Z"
},
"http://127.0.0.1:9002": {
"collectedAt": "2024-05-31T14:33:29.1373103+02:00",
"connected": 5,
"disconnected": 0,
"outgoingStreams": 6,
"incomingStreams": 0,
"outgoingBytes": 38215680,
"incomingBytes": 66121283,
"outgoingMessages": 228525,
"incomingMessages": 228510,
"outQueue": 0,
"lastPongTime": "2024-05-31T12:33:27Z"
},
...
```
2024-06-01 01:16:24 -04:00
|
|
|
c.outMessages.Add(int64(len(queue) + 1))
|
|
|
|
if c.outgoingBytes != nil {
|
|
|
|
c.outgoingBytes(int64(len(toSend) + queueSize))
|
|
|
|
}
|
|
|
|
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
c.connChange.L.Lock()
|
|
|
|
for {
|
|
|
|
state := c.State()
|
|
|
|
if state == StateConnected {
|
|
|
|
break
|
|
|
|
}
|
|
|
|
if debugPrint {
|
|
|
|
fmt.Println(c.Local, "Waiting for connection ->", c.Remote, "state: ", state)
|
|
|
|
}
|
|
|
|
if state == StateShutdown || state == StateConnectionError {
|
|
|
|
c.connChange.L.Unlock()
|
|
|
|
return
|
|
|
|
}
|
|
|
|
c.connChange.Wait()
|
|
|
|
select {
|
|
|
|
case <-ctx.Done():
|
|
|
|
c.connChange.L.Unlock()
|
|
|
|
return
|
|
|
|
default:
|
|
|
|
}
|
|
|
|
}
|
|
|
|
c.connChange.L.Unlock()
|
|
|
|
if len(queue) == 0 {
|
|
|
|
// Combine writes.
|
|
|
|
buf.Reset()
|
|
|
|
err := wsw.writeMessage(&buf, c.side, ws.OpBinary, toSend)
|
|
|
|
if err != nil {
|
2024-05-22 19:07:14 -04:00
|
|
|
if !xnet.IsNetworkOrHostDown(err, true) {
|
|
|
|
gridLogIf(ctx, fmt.Errorf("ws writeMessage: %w", err))
|
|
|
|
}
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
return
|
|
|
|
}
|
|
|
|
PutByteBuffer(toSend)
|
2024-05-22 19:07:14 -04:00
|
|
|
|
2024-02-06 16:34:46 -05:00
|
|
|
err = conn.SetWriteDeadline(time.Now().Add(connWriteTimeout))
|
|
|
|
if err != nil {
|
2024-04-04 08:04:40 -04:00
|
|
|
gridLogIf(ctx, fmt.Errorf("conn.SetWriteDeadline: %w", err))
|
2024-02-06 16:34:46 -05:00
|
|
|
return
|
|
|
|
}
|
2024-05-22 19:07:14 -04:00
|
|
|
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
_, err = buf.WriteTo(conn)
|
|
|
|
if err != nil {
|
2024-05-22 19:07:14 -04:00
|
|
|
if !xnet.IsNetworkOrHostDown(err, true) {
|
|
|
|
gridLogIf(ctx, fmt.Errorf("ws write: %w", err))
|
|
|
|
}
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
return
|
|
|
|
}
|
|
|
|
continue
|
|
|
|
}
|
|
|
|
|
|
|
|
// Merge entries and send
|
|
|
|
queue = append(queue, toSend)
|
|
|
|
if debugPrint {
|
|
|
|
fmt.Println("Merging", len(queue), "messages")
|
|
|
|
}
|
|
|
|
|
|
|
|
toSend = merged[:0]
|
|
|
|
m := message{Op: OpMerged, Seq: uint32(len(queue))}
|
|
|
|
var err error
|
|
|
|
toSend, err = m.MarshalMsg(toSend)
|
|
|
|
if err != nil {
|
2024-04-04 08:04:40 -04:00
|
|
|
gridLogIf(ctx, fmt.Errorf("msg.MarshalMsg: %w", err))
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
return
|
|
|
|
}
|
|
|
|
// Append as byte slices.
|
|
|
|
for _, q := range queue {
|
|
|
|
toSend = msgp.AppendBytes(toSend, q)
|
|
|
|
PutByteBuffer(q)
|
|
|
|
}
|
|
|
|
queue = queue[:0]
|
|
|
|
queueSize = 0
|
|
|
|
|
|
|
|
// Combine writes.
|
|
|
|
// Consider avoiding buffer copy.
|
|
|
|
buf.Reset()
|
|
|
|
err = wsw.writeMessage(&buf, c.side, ws.OpBinary, toSend)
|
|
|
|
if err != nil {
|
2024-05-22 19:07:14 -04:00
|
|
|
if !xnet.IsNetworkOrHostDown(err, true) {
|
|
|
|
gridLogIf(ctx, fmt.Errorf("ws writeMessage: %w", err))
|
|
|
|
}
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
return
|
|
|
|
}
|
2024-05-22 19:07:14 -04:00
|
|
|
|
2024-02-06 16:34:46 -05:00
|
|
|
err = conn.SetWriteDeadline(time.Now().Add(connWriteTimeout))
|
|
|
|
if err != nil {
|
2024-04-04 08:04:40 -04:00
|
|
|
gridLogIf(ctx, fmt.Errorf("conn.SetWriteDeadline: %w", err))
|
2024-02-06 16:34:46 -05:00
|
|
|
return
|
|
|
|
}
|
2024-05-22 19:07:14 -04:00
|
|
|
|
|
|
|
// buf is our local buffer, so we can reuse it.
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
_, err = buf.WriteTo(conn)
|
|
|
|
if err != nil {
|
2024-05-22 19:07:14 -04:00
|
|
|
if !xnet.IsNetworkOrHostDown(err, true) {
|
|
|
|
gridLogIf(ctx, fmt.Errorf("ws write: %w", err))
|
|
|
|
}
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
return
|
|
|
|
}
|
|
|
|
|
|
|
|
if buf.Cap() > writeBufferSize*4 {
|
|
|
|
// Reset buffer if it gets too big, so we don't keep it around.
|
|
|
|
buf = bytes.Buffer{}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
func (c *Connection) handleMsg(ctx context.Context, m message, subID *subHandlerID) {
|
|
|
|
switch m.Op {
|
|
|
|
case OpMuxServerMsg:
|
|
|
|
c.handleMuxServerMsg(ctx, m)
|
|
|
|
case OpResponse:
|
|
|
|
c.handleResponse(m)
|
|
|
|
case OpMuxClientMsg:
|
|
|
|
c.handleMuxClientMsg(ctx, m)
|
|
|
|
case OpUnblockSrvMux:
|
|
|
|
c.handleUnblockSrvMux(m)
|
|
|
|
case OpUnblockClMux:
|
|
|
|
c.handleUnblockClMux(m)
|
|
|
|
case OpDisconnectServerMux:
|
|
|
|
c.handleDisconnectServerMux(m)
|
|
|
|
case OpDisconnectClientMux:
|
|
|
|
c.handleDisconnectClientMux(m)
|
|
|
|
case OpPing:
|
|
|
|
c.handlePing(ctx, m)
|
|
|
|
case OpPong:
|
|
|
|
c.handlePong(ctx, m)
|
|
|
|
case OpRequest:
|
|
|
|
c.handleRequest(ctx, m, subID)
|
|
|
|
case OpAckMux:
|
|
|
|
c.handleAckMux(ctx, m)
|
|
|
|
case OpConnectMux:
|
|
|
|
c.handleConnectMux(ctx, m, subID)
|
2023-12-01 03:18:04 -05:00
|
|
|
case OpMuxConnectError:
|
|
|
|
c.handleConnectMuxError(ctx, m)
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
default:
|
2024-04-04 08:04:40 -04:00
|
|
|
gridLogIf(ctx, fmt.Errorf("unknown message type: %v", m.Op))
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
func (c *Connection) handleConnectMux(ctx context.Context, m message, subID *subHandlerID) {
|
|
|
|
// Stateless stream:
|
|
|
|
if m.Flags&FlagStateless != 0 {
|
|
|
|
// Reject for now, so we can safely add it later.
|
|
|
|
if true {
|
2024-04-04 08:04:40 -04:00
|
|
|
gridLogIf(ctx, c.queueMsg(m, muxConnectError{Error: "Stateless streams not supported"}))
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
return
|
|
|
|
}
|
|
|
|
|
|
|
|
var handler *StatelessHandler
|
|
|
|
if subID == nil {
|
|
|
|
handler = c.handlers.stateless[m.Handler]
|
|
|
|
} else {
|
|
|
|
handler = c.handlers.subStateless[*subID]
|
|
|
|
}
|
|
|
|
if handler == nil {
|
2024-04-04 08:04:40 -04:00
|
|
|
gridLogIf(ctx, c.queueMsg(m, muxConnectError{Error: "Invalid Handler for type"}))
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
return
|
|
|
|
}
|
|
|
|
_, _ = c.inStream.LoadOrCompute(m.MuxID, func() *muxServer {
|
|
|
|
return newMuxStateless(ctx, m, c, *handler)
|
|
|
|
})
|
|
|
|
} else {
|
|
|
|
// Stream:
|
|
|
|
var handler *StreamHandler
|
|
|
|
if subID == nil {
|
|
|
|
if !m.Handler.valid() {
|
2024-04-04 08:04:40 -04:00
|
|
|
gridLogIf(ctx, c.queueMsg(m, muxConnectError{Error: "Invalid Handler"}))
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
return
|
|
|
|
}
|
|
|
|
handler = c.handlers.streams[m.Handler]
|
|
|
|
} else {
|
|
|
|
handler = c.handlers.subStreams[*subID]
|
|
|
|
}
|
|
|
|
if handler == nil {
|
2024-04-04 08:04:40 -04:00
|
|
|
gridLogIf(ctx, c.queueMsg(m, muxConnectError{Error: "Invalid Handler for type"}))
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
return
|
|
|
|
}
|
|
|
|
|
|
|
|
// Start a new server handler if none exists.
|
|
|
|
_, _ = c.inStream.LoadOrCompute(m.MuxID, func() *muxServer {
|
|
|
|
return newMuxStream(ctx, m, c, *handler)
|
|
|
|
})
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2023-12-01 03:18:04 -05:00
|
|
|
// handleConnectMuxError when mux connect was rejected.
|
|
|
|
func (c *Connection) handleConnectMuxError(ctx context.Context, m message) {
|
|
|
|
if v, ok := c.outgoing.Load(m.MuxID); ok {
|
|
|
|
var cErr muxConnectError
|
|
|
|
_, err := cErr.UnmarshalMsg(m.Payload)
|
2024-04-04 08:04:40 -04:00
|
|
|
gridLogIf(ctx, err)
|
2023-12-01 03:18:04 -05:00
|
|
|
v.error(RemoteErr(cErr.Error))
|
|
|
|
return
|
|
|
|
}
|
|
|
|
PutByteBuffer(m.Payload)
|
|
|
|
}
|
|
|
|
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
func (c *Connection) handleAckMux(ctx context.Context, m message) {
|
|
|
|
PutByteBuffer(m.Payload)
|
|
|
|
v, ok := c.outgoing.Load(m.MuxID)
|
|
|
|
if !ok {
|
|
|
|
if m.Flags&FlagEOF == 0 {
|
2024-04-04 08:04:40 -04:00
|
|
|
gridLogIf(ctx, c.queueMsg(message{Op: OpDisconnectClientMux, MuxID: m.MuxID}, nil))
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
}
|
|
|
|
return
|
|
|
|
}
|
|
|
|
if debugPrint {
|
|
|
|
fmt.Println(c.Local, "Mux", m.MuxID, "Acknowledged")
|
|
|
|
}
|
|
|
|
v.ack(m.Seq)
|
|
|
|
}
|
|
|
|
|
|
|
|
func (c *Connection) handleRequest(ctx context.Context, m message, subID *subHandlerID) {
|
|
|
|
if !m.Handler.valid() {
|
2024-04-04 08:04:40 -04:00
|
|
|
gridLogIf(ctx, c.queueMsg(m, muxConnectError{Error: "Invalid Handler"}))
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
return
|
|
|
|
}
|
|
|
|
if debugReqs {
|
|
|
|
fmt.Println(m.MuxID, c.StringReverse(), "INCOMING")
|
|
|
|
}
|
|
|
|
// Singleshot message
|
|
|
|
var handler SingleHandlerFn
|
|
|
|
if subID == nil {
|
|
|
|
handler = c.handlers.single[m.Handler]
|
|
|
|
} else {
|
|
|
|
handler = c.handlers.subSingle[*subID]
|
|
|
|
}
|
|
|
|
if handler == nil {
|
2024-04-04 08:04:40 -04:00
|
|
|
gridLogIf(ctx, c.queueMsg(m, muxConnectError{Error: "Invalid Handler for type"}))
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
return
|
|
|
|
}
|
|
|
|
|
|
|
|
// TODO: This causes allocations, but escape analysis doesn't really show the cause.
|
|
|
|
// If another faithful engineer wants to take a stab, feel free.
|
|
|
|
go func(m message) {
|
|
|
|
var start time.Time
|
|
|
|
if m.DeadlineMS > 0 {
|
|
|
|
start = time.Now()
|
|
|
|
}
|
|
|
|
var b []byte
|
|
|
|
var err *RemoteErr
|
|
|
|
func() {
|
|
|
|
defer func() {
|
|
|
|
if rec := recover(); rec != nil {
|
|
|
|
err = NewRemoteErrString(fmt.Sprintf("handleMessages: panic recovered: %v", rec))
|
|
|
|
debug.PrintStack()
|
2024-04-04 08:04:40 -04:00
|
|
|
gridLogIf(ctx, err)
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
}
|
|
|
|
}()
|
|
|
|
b, err = handler(m.Payload)
|
|
|
|
if debugPrint {
|
|
|
|
fmt.Println(c.Local, "Handler returned payload:", bytesOrLength(b), "err:", err)
|
|
|
|
}
|
|
|
|
}()
|
|
|
|
|
|
|
|
if m.DeadlineMS > 0 && time.Since(start).Milliseconds()+c.addDeadline.Milliseconds() > int64(m.DeadlineMS) {
|
|
|
|
if debugReqs {
|
|
|
|
fmt.Println(m.MuxID, c.StringReverse(), "DEADLINE EXCEEDED")
|
|
|
|
}
|
|
|
|
// No need to return result
|
|
|
|
PutByteBuffer(b)
|
|
|
|
return
|
|
|
|
}
|
|
|
|
if debugReqs {
|
|
|
|
fmt.Println(m.MuxID, c.StringReverse(), "RESPONDING")
|
|
|
|
}
|
|
|
|
m = message{
|
|
|
|
MuxID: m.MuxID,
|
|
|
|
Seq: m.Seq,
|
|
|
|
Op: OpResponse,
|
|
|
|
Flags: FlagEOF,
|
|
|
|
}
|
|
|
|
if err != nil {
|
|
|
|
m.Flags |= FlagPayloadIsErr
|
|
|
|
m.Payload = []byte(*err)
|
|
|
|
} else {
|
|
|
|
m.Payload = b
|
|
|
|
m.setZeroPayloadFlag()
|
|
|
|
}
|
2024-04-04 08:04:40 -04:00
|
|
|
gridLogIf(ctx, c.queueMsg(m, nil))
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
}(m)
|
|
|
|
}
|
|
|
|
|
|
|
|
func (c *Connection) handlePong(ctx context.Context, m message) {
|
2024-06-07 11:51:52 -04:00
|
|
|
if m.MuxID == 0 && m.Payload == nil {
|
|
|
|
atomic.StoreInt64(&c.LastPong, time.Now().UnixNano())
|
|
|
|
return
|
|
|
|
}
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
var pong pongMsg
|
|
|
|
_, err := pong.UnmarshalMsg(m.Payload)
|
|
|
|
PutByteBuffer(m.Payload)
|
2024-04-04 08:04:40 -04:00
|
|
|
gridLogIf(ctx, err)
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
if m.MuxID == 0 {
|
2024-06-07 11:51:52 -04:00
|
|
|
atomic.StoreInt64(&c.LastPong, time.Now().UnixNano())
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
return
|
|
|
|
}
|
|
|
|
if v, ok := c.outgoing.Load(m.MuxID); ok {
|
|
|
|
v.pong(pong)
|
|
|
|
} else {
|
|
|
|
// We don't care if the client was removed in the meantime,
|
|
|
|
// but we send a disconnect message to the server just in case.
|
2024-04-04 08:04:40 -04:00
|
|
|
gridLogIf(ctx, c.queueMsg(message{Op: OpDisconnectClientMux, MuxID: m.MuxID}, nil))
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
func (c *Connection) handlePing(ctx context.Context, m message) {
|
|
|
|
if m.MuxID == 0 {
|
2024-06-07 11:51:52 -04:00
|
|
|
m.Flags.Clear(FlagPayloadIsZero)
|
|
|
|
m.Op = OpPong
|
|
|
|
gridLogIf(ctx, c.queueMsg(m, nil))
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
return
|
|
|
|
}
|
|
|
|
// Single calls do not support pinging.
|
|
|
|
if v, ok := c.inStream.Load(m.MuxID); ok {
|
|
|
|
pong := v.ping(m.Seq)
|
2024-04-04 08:04:40 -04:00
|
|
|
gridLogIf(ctx, c.queueMsg(m, &pong))
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
} else {
|
|
|
|
pong := pongMsg{NotFound: true}
|
2024-04-04 08:04:40 -04:00
|
|
|
gridLogIf(ctx, c.queueMsg(m, &pong))
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
}
|
|
|
|
return
|
|
|
|
}
|
|
|
|
|
|
|
|
func (c *Connection) handleDisconnectClientMux(m message) {
|
|
|
|
if v, ok := c.outgoing.Load(m.MuxID); ok {
|
|
|
|
if m.Flags&FlagPayloadIsErr != 0 {
|
|
|
|
v.error(RemoteErr(m.Payload))
|
|
|
|
} else {
|
2024-02-03 04:04:33 -05:00
|
|
|
v.error(ErrDisconnected)
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
}
|
|
|
|
return
|
|
|
|
}
|
|
|
|
PutByteBuffer(m.Payload)
|
|
|
|
}
|
|
|
|
|
|
|
|
func (c *Connection) handleDisconnectServerMux(m message) {
|
|
|
|
if debugPrint {
|
|
|
|
fmt.Println(c.Local, "Disconnect server mux:", m.MuxID)
|
|
|
|
}
|
|
|
|
PutByteBuffer(m.Payload)
|
|
|
|
m.Payload = nil
|
|
|
|
if v, ok := c.inStream.Load(m.MuxID); ok {
|
|
|
|
v.close()
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
func (c *Connection) handleUnblockClMux(m message) {
|
|
|
|
PutByteBuffer(m.Payload)
|
|
|
|
m.Payload = nil
|
|
|
|
v, ok := c.outgoing.Load(m.MuxID)
|
|
|
|
if !ok {
|
|
|
|
if debugPrint {
|
|
|
|
fmt.Println(c.Local, "Unblock: Unknown Mux:", m.MuxID)
|
|
|
|
}
|
|
|
|
// We can expect to receive unblocks for closed muxes
|
|
|
|
return
|
|
|
|
}
|
|
|
|
v.unblockSend(m.Seq)
|
|
|
|
}
|
|
|
|
|
|
|
|
func (c *Connection) handleUnblockSrvMux(m message) {
|
|
|
|
if m.Payload != nil {
|
|
|
|
PutByteBuffer(m.Payload)
|
|
|
|
}
|
|
|
|
m.Payload = nil
|
|
|
|
if v, ok := c.inStream.Load(m.MuxID); ok {
|
|
|
|
v.unblockSend(m.Seq)
|
|
|
|
return
|
|
|
|
}
|
|
|
|
// We can expect to receive unblocks for closed muxes
|
|
|
|
if debugPrint {
|
|
|
|
fmt.Println(c.Local, "Unblock: Unknown Mux:", m.MuxID)
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
func (c *Connection) handleMuxClientMsg(ctx context.Context, m message) {
|
|
|
|
v, ok := c.inStream.Load(m.MuxID)
|
|
|
|
if !ok {
|
|
|
|
if debugPrint {
|
|
|
|
fmt.Println(c.Local, "OpMuxClientMsg: Unknown Mux:", m.MuxID)
|
|
|
|
}
|
2024-04-04 08:04:40 -04:00
|
|
|
gridLogIf(ctx, c.queueMsg(message{Op: OpDisconnectClientMux, MuxID: m.MuxID}, nil))
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
PutByteBuffer(m.Payload)
|
|
|
|
return
|
|
|
|
}
|
|
|
|
v.message(m)
|
|
|
|
}
|
|
|
|
|
|
|
|
func (c *Connection) handleResponse(m message) {
|
|
|
|
if debugPrint {
|
|
|
|
fmt.Printf("%s Got mux response: %v\n", c.Local, m)
|
|
|
|
}
|
|
|
|
v, ok := c.outgoing.Load(m.MuxID)
|
|
|
|
if !ok {
|
|
|
|
if debugReqs {
|
|
|
|
fmt.Println(m.MuxID, c.String(), "Got response for unknown mux")
|
|
|
|
}
|
|
|
|
PutByteBuffer(m.Payload)
|
|
|
|
return
|
|
|
|
}
|
|
|
|
if m.Flags&FlagPayloadIsErr != 0 {
|
|
|
|
v.response(m.Seq, Response{
|
|
|
|
Msg: nil,
|
|
|
|
Err: RemoteErr(m.Payload),
|
|
|
|
})
|
|
|
|
PutByteBuffer(m.Payload)
|
|
|
|
} else {
|
|
|
|
v.response(m.Seq, Response{
|
|
|
|
Msg: m.Payload,
|
|
|
|
Err: nil,
|
|
|
|
})
|
|
|
|
}
|
|
|
|
v.close()
|
|
|
|
if debugReqs {
|
|
|
|
fmt.Println(m.MuxID, c.String(), "handleResponse: closing mux")
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
func (c *Connection) handleMuxServerMsg(ctx context.Context, m message) {
|
|
|
|
if debugPrint {
|
|
|
|
fmt.Printf("%s Got mux msg: %v\n", c.Local, m)
|
|
|
|
}
|
|
|
|
v, ok := c.outgoing.Load(m.MuxID)
|
|
|
|
if !ok {
|
|
|
|
if m.Flags&FlagEOF == 0 {
|
2024-04-04 08:04:40 -04:00
|
|
|
gridLogIf(ctx, c.queueMsg(message{Op: OpDisconnectClientMux, MuxID: m.MuxID}, nil))
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
}
|
|
|
|
PutByteBuffer(m.Payload)
|
|
|
|
return
|
|
|
|
}
|
|
|
|
if m.Flags&FlagPayloadIsErr != 0 {
|
|
|
|
v.response(m.Seq, Response{
|
|
|
|
Msg: nil,
|
|
|
|
Err: RemoteErr(m.Payload),
|
|
|
|
})
|
|
|
|
PutByteBuffer(m.Payload)
|
|
|
|
} else if m.Payload != nil {
|
|
|
|
v.response(m.Seq, Response{
|
|
|
|
Msg: m.Payload,
|
|
|
|
Err: nil,
|
|
|
|
})
|
|
|
|
}
|
|
|
|
if m.Flags&FlagEOF != 0 {
|
2024-02-28 13:05:18 -05:00
|
|
|
if v.cancelFn != nil && m.Flags&FlagPayloadIsErr == 0 {
|
2024-06-07 11:51:52 -04:00
|
|
|
// We must obtain the lock before calling cancelFn
|
|
|
|
// Otherwise others may pick up the error before close is called.
|
|
|
|
v.respMu.Lock()
|
2024-02-28 13:05:18 -05:00
|
|
|
v.cancelFn(errStreamEOF)
|
2024-06-07 11:51:52 -04:00
|
|
|
v.closeLocked()
|
|
|
|
v.respMu.Unlock()
|
|
|
|
} else {
|
|
|
|
v.close()
|
2024-02-28 13:05:18 -05:00
|
|
|
}
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
if debugReqs {
|
|
|
|
fmt.Println(m.MuxID, c.String(), "handleMuxServerMsg: DELETING MUX")
|
|
|
|
}
|
|
|
|
c.outgoing.Delete(m.MuxID)
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
func (c *Connection) deleteMux(incoming bool, muxID uint64) {
|
|
|
|
if incoming {
|
|
|
|
if debugPrint {
|
|
|
|
fmt.Println("deleteMux: disconnect incoming mux", muxID)
|
|
|
|
}
|
|
|
|
v, loaded := c.inStream.LoadAndDelete(muxID)
|
|
|
|
if loaded && v != nil {
|
2024-04-04 08:04:40 -04:00
|
|
|
gridLogIf(c.ctx, c.queueMsg(message{Op: OpDisconnectClientMux, MuxID: muxID}, nil))
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
v.close()
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
if debugPrint {
|
|
|
|
fmt.Println("deleteMux: disconnect outgoing mux", muxID)
|
|
|
|
}
|
|
|
|
v, loaded := c.outgoing.LoadAndDelete(muxID)
|
|
|
|
if loaded && v != nil {
|
|
|
|
if debugReqs {
|
|
|
|
fmt.Println(muxID, c.String(), "deleteMux: DELETING MUX")
|
|
|
|
}
|
|
|
|
v.close()
|
2024-04-04 08:04:40 -04:00
|
|
|
gridLogIf(c.ctx, c.queueMsg(message{Op: OpDisconnectServerMux, MuxID: muxID}, nil))
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
// State returns the current connection status.
|
|
|
|
func (c *Connection) State() State {
|
|
|
|
return State(atomic.LoadUint32((*uint32)(&c.state)))
|
|
|
|
}
|
|
|
|
|
|
|
|
// Stats returns the current connection stats.
|
Add per connection RPC metrics (#19852)
Provides individual and aggregate stats for each RPC connection.
Example:
```
"rpc": {
"collectedAt": "2024-05-31T14:33:29.1373103+02:00",
"connected": 30,
"disconnected": 0,
"outgoingStreams": 69,
"incomingStreams": 0,
"outgoingBytes": 174822796,
"incomingBytes": 175821566,
"outgoingMessages": 768595,
"incomingMessages": 768589,
"outQueue": 0,
"lastPongTime": "2024-05-31T12:33:28Z",
"byDestination": {
"http://127.0.0.1:9001": {
"collectedAt": "2024-05-31T14:33:29.1373103+02:00",
"connected": 5,
"disconnected": 0,
"outgoingStreams": 2,
"incomingStreams": 0,
"outgoingBytes": 38432543,
"incomingBytes": 66604052,
"outgoingMessages": 229496,
"incomingMessages": 229575,
"outQueue": 0,
"lastPongTime": "2024-05-31T12:33:27Z"
},
"http://127.0.0.1:9002": {
"collectedAt": "2024-05-31T14:33:29.1373103+02:00",
"connected": 5,
"disconnected": 0,
"outgoingStreams": 6,
"incomingStreams": 0,
"outgoingBytes": 38215680,
"incomingBytes": 66121283,
"outgoingMessages": 228525,
"incomingMessages": 228510,
"outQueue": 0,
"lastPongTime": "2024-05-31T12:33:27Z"
},
...
```
2024-06-01 01:16:24 -04:00
|
|
|
func (c *Connection) Stats() madmin.RPCMetrics {
|
|
|
|
conn := 0
|
|
|
|
if c.State() == StateConnected {
|
|
|
|
conn++
|
|
|
|
}
|
|
|
|
m := madmin.RPCMetrics{
|
|
|
|
CollectedAt: time.Now(),
|
|
|
|
Connected: conn,
|
|
|
|
Disconnected: 1 - conn,
|
|
|
|
IncomingStreams: c.inStream.Size(),
|
|
|
|
OutgoingStreams: c.outgoing.Size(),
|
|
|
|
IncomingBytes: c.inBytes.Load(),
|
|
|
|
OutgoingBytes: c.outBytes.Load(),
|
|
|
|
IncomingMessages: c.inMessages.Load(),
|
|
|
|
OutgoingMessages: c.outMessages.Load(),
|
|
|
|
OutQueue: len(c.outQueue),
|
2024-06-07 11:51:52 -04:00
|
|
|
LastPongTime: time.Unix(0, c.LastPong).UTC(),
|
Add per connection RPC metrics (#19852)
Provides individual and aggregate stats for each RPC connection.
Example:
```
"rpc": {
"collectedAt": "2024-05-31T14:33:29.1373103+02:00",
"connected": 30,
"disconnected": 0,
"outgoingStreams": 69,
"incomingStreams": 0,
"outgoingBytes": 174822796,
"incomingBytes": 175821566,
"outgoingMessages": 768595,
"incomingMessages": 768589,
"outQueue": 0,
"lastPongTime": "2024-05-31T12:33:28Z",
"byDestination": {
"http://127.0.0.1:9001": {
"collectedAt": "2024-05-31T14:33:29.1373103+02:00",
"connected": 5,
"disconnected": 0,
"outgoingStreams": 2,
"incomingStreams": 0,
"outgoingBytes": 38432543,
"incomingBytes": 66604052,
"outgoingMessages": 229496,
"incomingMessages": 229575,
"outQueue": 0,
"lastPongTime": "2024-05-31T12:33:27Z"
},
"http://127.0.0.1:9002": {
"collectedAt": "2024-05-31T14:33:29.1373103+02:00",
"connected": 5,
"disconnected": 0,
"outgoingStreams": 6,
"incomingStreams": 0,
"outgoingBytes": 38215680,
"incomingBytes": 66121283,
"outgoingMessages": 228525,
"incomingMessages": 228510,
"outQueue": 0,
"lastPongTime": "2024-05-31T12:33:27Z"
},
...
```
2024-06-01 01:16:24 -04:00
|
|
|
}
|
|
|
|
m.ByDestination = map[string]madmin.RPCMetrics{
|
|
|
|
c.Remote: m,
|
|
|
|
}
|
|
|
|
return m
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
}
|
|
|
|
|
|
|
|
func (c *Connection) debugMsg(d debugMsg, args ...any) {
|
|
|
|
if debugPrint {
|
|
|
|
fmt.Println("debug: sending message", d, args)
|
|
|
|
}
|
|
|
|
|
|
|
|
switch d {
|
|
|
|
case debugShutdown:
|
|
|
|
c.updateState(StateShutdown)
|
|
|
|
case debugKillInbound:
|
|
|
|
c.connMu.Lock()
|
|
|
|
defer c.connMu.Unlock()
|
|
|
|
if c.debugInConn != nil {
|
|
|
|
if debugPrint {
|
|
|
|
fmt.Println("debug: closing inbound connection")
|
|
|
|
}
|
|
|
|
c.debugInConn.Close()
|
|
|
|
}
|
|
|
|
case debugKillOutbound:
|
|
|
|
c.connMu.Lock()
|
|
|
|
defer c.connMu.Unlock()
|
|
|
|
if c.debugInConn != nil {
|
|
|
|
if debugPrint {
|
|
|
|
fmt.Println("debug: closing outgoing connection")
|
|
|
|
}
|
|
|
|
c.debugInConn.Close()
|
|
|
|
}
|
|
|
|
case debugWaitForExit:
|
2024-01-24 14:49:39 -05:00
|
|
|
c.reconnectMu.Lock()
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
c.handleMsgWg.Wait()
|
2024-01-24 14:49:39 -05:00
|
|
|
c.reconnectMu.Unlock()
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
case debugSetConnPingDuration:
|
|
|
|
c.connMu.Lock()
|
|
|
|
defer c.connMu.Unlock()
|
|
|
|
c.connPingInterval = args[0].(time.Duration)
|
2024-06-07 11:51:52 -04:00
|
|
|
if c.connPingInterval < time.Second {
|
|
|
|
panic("CONN ping interval too low")
|
|
|
|
}
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
case debugSetClientPingDuration:
|
2024-06-07 11:51:52 -04:00
|
|
|
c.connMu.Lock()
|
|
|
|
defer c.connMu.Unlock()
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
c.clientPingInterval = args[0].(time.Duration)
|
|
|
|
case debugAddToDeadline:
|
|
|
|
c.addDeadline = args[0].(time.Duration)
|
2024-02-08 13:15:27 -05:00
|
|
|
case debugIsOutgoingClosed:
|
|
|
|
// params: muxID uint64, isClosed func(bool)
|
|
|
|
muxID := args[0].(uint64)
|
|
|
|
resp := args[1].(func(b bool))
|
|
|
|
mid, ok := c.outgoing.Load(muxID)
|
|
|
|
if !ok || mid == nil {
|
|
|
|
resp(true)
|
|
|
|
return
|
|
|
|
}
|
|
|
|
mid.respMu.Lock()
|
|
|
|
resp(mid.closed)
|
|
|
|
mid.respMu.Unlock()
|
2024-06-07 11:51:52 -04:00
|
|
|
case debugBlockInboundMessages:
|
|
|
|
c.connMu.Lock()
|
|
|
|
block := (<-chan struct{})(args[0].(chan struct{}))
|
|
|
|
c.blockMessages.Store(&block)
|
|
|
|
c.connMu.Unlock()
|
perf: websocket grid connectivity for all internode communication (#18461)
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
// wsWriter writes websocket messages.
|
|
|
|
type wsWriter struct {
|
|
|
|
tmp [ws.MaxHeaderSize]byte
|
|
|
|
}
|
|
|
|
|
|
|
|
// writeMessage writes a message to w without allocations.
|
|
|
|
func (ww *wsWriter) writeMessage(w io.Writer, s ws.State, op ws.OpCode, p []byte) error {
|
|
|
|
const fin = true
|
|
|
|
var frame ws.Frame
|
|
|
|
if s.ClientSide() {
|
|
|
|
// We do not need to copy the payload, since we own it.
|
|
|
|
payload := p
|
|
|
|
|
|
|
|
frame = ws.NewFrame(op, fin, payload)
|
|
|
|
frame = ws.MaskFrameInPlace(frame)
|
|
|
|
} else {
|
|
|
|
frame = ws.NewFrame(op, fin, p)
|
|
|
|
}
|
|
|
|
|
|
|
|
return ww.writeFrame(w, frame)
|
|
|
|
}
|
|
|
|
|
|
|
|
// writeFrame writes frame binary representation into w.
|
|
|
|
func (ww *wsWriter) writeFrame(w io.Writer, f ws.Frame) error {
|
|
|
|
const (
|
|
|
|
bit0 = 0x80
|
|
|
|
len7 = int64(125)
|
|
|
|
len16 = int64(^(uint16(0)))
|
|
|
|
len64 = int64(^(uint64(0)) >> 1)
|
|
|
|
)
|
|
|
|
|
|
|
|
bts := ww.tmp[:]
|
|
|
|
if f.Header.Fin {
|
|
|
|
bts[0] |= bit0
|
|
|
|
}
|
|
|
|
bts[0] |= f.Header.Rsv << 4
|
|
|
|
bts[0] |= byte(f.Header.OpCode)
|
|
|
|
|
|
|
|
var n int
|
|
|
|
switch {
|
|
|
|
case f.Header.Length <= len7:
|
|
|
|
bts[1] = byte(f.Header.Length)
|
|
|
|
n = 2
|
|
|
|
|
|
|
|
case f.Header.Length <= len16:
|
|
|
|
bts[1] = 126
|
|
|
|
binary.BigEndian.PutUint16(bts[2:4], uint16(f.Header.Length))
|
|
|
|
n = 4
|
|
|
|
|
|
|
|
case f.Header.Length <= len64:
|
|
|
|
bts[1] = 127
|
|
|
|
binary.BigEndian.PutUint64(bts[2:10], uint64(f.Header.Length))
|
|
|
|
n = 10
|
|
|
|
|
|
|
|
default:
|
|
|
|
return ws.ErrHeaderLengthUnexpected
|
|
|
|
}
|
|
|
|
|
|
|
|
if f.Header.Masked {
|
|
|
|
bts[1] |= bit0
|
|
|
|
n += copy(bts[n:], f.Header.Mask[:])
|
|
|
|
}
|
|
|
|
|
|
|
|
if _, err := w.Write(bts[:n]); err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
|
|
|
|
_, err := w.Write(f.Payload)
|
|
|
|
return err
|
|
|
|
}
|