minio/internal/grid/manager.go

332 lines
9.5 KiB
Go
Raw Normal View History

perf: websocket grid connectivity for all internode communication (#18461) This PR adds a WebSocket grid feature that allows servers to communicate via a single two-way connection. There are two request types: * Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small roundtrips with small payloads. * Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`, which allows for different combinations of full two-way streams with an initial payload. Only a single stream is created between two machines - and there is, as such, no server/client relation since both sides can initiate and handle requests. Which server initiates the request is decided deterministically on the server names. Requests are made through a mux client and server, which handles message passing, congestion, cancelation, timeouts, etc. If a connection is lost, all requests are canceled, and the calling server will try to reconnect. Registered handlers can operate directly on byte slices or use a higher-level generics abstraction. There is no versioning of handlers/clients, and incompatible changes should be handled by adding new handlers. The request path can be changed to a new one for any protocol changes. First, all servers create a "Manager." The manager must know its address as well as all remote addresses. This will manage all connections. To get a connection to any remote, ask the manager to provide it given the remote address using. ``` func (m *Manager) Connection(host string) *Connection ``` All serverside handlers must also be registered on the manager. This will make sure that all incoming requests are served. The number of in-flight requests and responses must also be given for streaming requests. The "Connection" returned manages the mux-clients. Requests issued to the connection will be sent to the remote. * `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)` performs a single request and returns the result. Any deadline provided on the request is forwarded to the server, and canceling the context will make the function return at once. * `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)` will initiate a remote call and send the initial payload. ```Go // A Stream is a two-way stream. // All responses *must* be read by the caller. // If the call is canceled through the context, //The appropriate error will be returned. type Stream struct { // Responses from the remote server. // Channel will be closed after an error or when the remote closes. // All responses *must* be read by the caller until either an error is returned or the channel is closed. // Canceling the context will cause the context cancellation error to be returned. Responses <-chan Response // Requests sent to the server. // If the handler is defined with 0 incoming capacity this will be nil. // Channel *must* be closed to signal the end of the stream. // If the request context is canceled, the stream will no longer process requests. Requests chan<- []byte } type Response struct { Msg []byte Err error } ``` There are generic versions of the server/client handlers that allow the use of type safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
// Copyright (c) 2015-2023 MinIO, Inc.
//
// This file is part of MinIO Object Storage stack
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU Affero General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU Affero General Public License for more details.
//
// You should have received a copy of the GNU Affero General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
package grid
import (
"context"
"crypto/tls"
"fmt"
"net/http"
"runtime/debug"
"strings"
"github.com/gobwas/ws"
"github.com/gobwas/ws/wsutil"
"github.com/google/uuid"
"github.com/minio/madmin-go/v3"
"github.com/minio/minio/internal/pubsub"
"github.com/minio/mux"
)
const (
// apiVersion is a major version of the entire api.
// Bumping this should only be done when overall,
// incompatible changes are made, not when adding a new handler
// or changing an existing handler.
apiVersion = "v1"
// RoutePath is the remote path to connect to.
RoutePath = "/minio/grid/" + apiVersion
)
// Manager will contain all the connections to the grid.
// It also handles incoming requests and routes them to the appropriate connection.
type Manager struct {
// ID is an instance ID, that will change whenever the server restarts.
// This allows remotes to keep track of whether state is preserved.
ID uuid.UUID
// Immutable after creation, so no locks.
targets map[string]*Connection
// serverside handlers.
handlers handlers
// local host name.
local string
// Validate incoming requests.
authRequest func(r *http.Request) error
}
// ManagerOptions are options for creating a new grid manager.
type ManagerOptions struct {
Dialer ContextDialer // Outgoing dialer.
Local string // Local host name.
Hosts []string // All hosts, including local in the grid.
AddAuth AuthFn // Add authentication to the given audience.
AuthRequest func(r *http.Request) error // Validate incoming requests.
TLSConfig *tls.Config // TLS to apply to the connections.
perf: websocket grid connectivity for all internode communication (#18461) This PR adds a WebSocket grid feature that allows servers to communicate via a single two-way connection. There are two request types: * Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small roundtrips with small payloads. * Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`, which allows for different combinations of full two-way streams with an initial payload. Only a single stream is created between two machines - and there is, as such, no server/client relation since both sides can initiate and handle requests. Which server initiates the request is decided deterministically on the server names. Requests are made through a mux client and server, which handles message passing, congestion, cancelation, timeouts, etc. If a connection is lost, all requests are canceled, and the calling server will try to reconnect. Registered handlers can operate directly on byte slices or use a higher-level generics abstraction. There is no versioning of handlers/clients, and incompatible changes should be handled by adding new handlers. The request path can be changed to a new one for any protocol changes. First, all servers create a "Manager." The manager must know its address as well as all remote addresses. This will manage all connections. To get a connection to any remote, ask the manager to provide it given the remote address using. ``` func (m *Manager) Connection(host string) *Connection ``` All serverside handlers must also be registered on the manager. This will make sure that all incoming requests are served. The number of in-flight requests and responses must also be given for streaming requests. The "Connection" returned manages the mux-clients. Requests issued to the connection will be sent to the remote. * `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)` performs a single request and returns the result. Any deadline provided on the request is forwarded to the server, and canceling the context will make the function return at once. * `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)` will initiate a remote call and send the initial payload. ```Go // A Stream is a two-way stream. // All responses *must* be read by the caller. // If the call is canceled through the context, //The appropriate error will be returned. type Stream struct { // Responses from the remote server. // Channel will be closed after an error or when the remote closes. // All responses *must* be read by the caller until either an error is returned or the channel is closed. // Canceling the context will cause the context cancellation error to be returned. Responses <-chan Response // Requests sent to the server. // If the handler is defined with 0 incoming capacity this will be nil. // Channel *must* be closed to signal the end of the stream. // If the request context is canceled, the stream will no longer process requests. Requests chan<- []byte } type Response struct { Msg []byte Err error } ``` There are generic versions of the server/client handlers that allow the use of type safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
Incoming func(n int64) // Record incoming bytes.
Outgoing func(n int64) // Record outgoing bytes.
BlockConnect chan struct{} // If set, incoming and outgoing connections will be blocked until closed.
TraceTo *pubsub.PubSub[madmin.TraceInfo, madmin.TraceType]
}
// NewManager creates a new grid manager
func NewManager(ctx context.Context, o ManagerOptions) (*Manager, error) {
found := false
if o.AuthRequest == nil {
return nil, fmt.Errorf("grid: AuthRequest must be set")
}
m := &Manager{
ID: uuid.New(),
targets: make(map[string]*Connection, len(o.Hosts)),
local: o.Local,
authRequest: o.AuthRequest,
}
m.handlers.init()
if ctx == nil {
ctx = context.Background()
}
for _, host := range o.Hosts {
if host == o.Local {
if found {
return nil, fmt.Errorf("grid: local host found multiple times")
}
found = true
// No connection to local.
continue
}
m.targets[host] = newConnection(connectionParams{
ctx: ctx,
id: m.ID,
local: o.Local,
remote: host,
dial: o.Dialer,
handlers: &m.handlers,
auth: o.AddAuth,
blockConnect: o.BlockConnect,
tlsConfig: o.TLSConfig,
publisher: o.TraceTo,
incomingBytes: o.Incoming,
outgoingBytes: o.Outgoing,
perf: websocket grid connectivity for all internode communication (#18461) This PR adds a WebSocket grid feature that allows servers to communicate via a single two-way connection. There are two request types: * Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small roundtrips with small payloads. * Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`, which allows for different combinations of full two-way streams with an initial payload. Only a single stream is created between two machines - and there is, as such, no server/client relation since both sides can initiate and handle requests. Which server initiates the request is decided deterministically on the server names. Requests are made through a mux client and server, which handles message passing, congestion, cancelation, timeouts, etc. If a connection is lost, all requests are canceled, and the calling server will try to reconnect. Registered handlers can operate directly on byte slices or use a higher-level generics abstraction. There is no versioning of handlers/clients, and incompatible changes should be handled by adding new handlers. The request path can be changed to a new one for any protocol changes. First, all servers create a "Manager." The manager must know its address as well as all remote addresses. This will manage all connections. To get a connection to any remote, ask the manager to provide it given the remote address using. ``` func (m *Manager) Connection(host string) *Connection ``` All serverside handlers must also be registered on the manager. This will make sure that all incoming requests are served. The number of in-flight requests and responses must also be given for streaming requests. The "Connection" returned manages the mux-clients. Requests issued to the connection will be sent to the remote. * `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)` performs a single request and returns the result. Any deadline provided on the request is forwarded to the server, and canceling the context will make the function return at once. * `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)` will initiate a remote call and send the initial payload. ```Go // A Stream is a two-way stream. // All responses *must* be read by the caller. // If the call is canceled through the context, //The appropriate error will be returned. type Stream struct { // Responses from the remote server. // Channel will be closed after an error or when the remote closes. // All responses *must* be read by the caller until either an error is returned or the channel is closed. // Canceling the context will cause the context cancellation error to be returned. Responses <-chan Response // Requests sent to the server. // If the handler is defined with 0 incoming capacity this will be nil. // Channel *must* be closed to signal the end of the stream. // If the request context is canceled, the stream will no longer process requests. Requests chan<- []byte } type Response struct { Msg []byte Err error } ``` There are generic versions of the server/client handlers that allow the use of type safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
})
}
if !found {
return nil, fmt.Errorf("grid: local host not found")
}
return m, nil
}
// AddToMux will add the grid manager to the given mux.
func (m *Manager) AddToMux(router *mux.Router) {
router.Handle(RoutePath, m.Handler())
}
// Handler returns a handler that can be used to serve grid requests.
// This should be connected on RoutePath to the main server.
func (m *Manager) Handler() http.HandlerFunc {
return func(w http.ResponseWriter, req *http.Request) {
defer func() {
if debugPrint {
fmt.Printf("grid: Handler returning from: %v %v\n", req.Method, req.URL)
}
if r := recover(); r != nil {
debug.PrintStack()
err := fmt.Errorf("grid: panic: %v\n", r)
gridLogIf(context.Background(), err, err.Error())
perf: websocket grid connectivity for all internode communication (#18461) This PR adds a WebSocket grid feature that allows servers to communicate via a single two-way connection. There are two request types: * Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small roundtrips with small payloads. * Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`, which allows for different combinations of full two-way streams with an initial payload. Only a single stream is created between two machines - and there is, as such, no server/client relation since both sides can initiate and handle requests. Which server initiates the request is decided deterministically on the server names. Requests are made through a mux client and server, which handles message passing, congestion, cancelation, timeouts, etc. If a connection is lost, all requests are canceled, and the calling server will try to reconnect. Registered handlers can operate directly on byte slices or use a higher-level generics abstraction. There is no versioning of handlers/clients, and incompatible changes should be handled by adding new handlers. The request path can be changed to a new one for any protocol changes. First, all servers create a "Manager." The manager must know its address as well as all remote addresses. This will manage all connections. To get a connection to any remote, ask the manager to provide it given the remote address using. ``` func (m *Manager) Connection(host string) *Connection ``` All serverside handlers must also be registered on the manager. This will make sure that all incoming requests are served. The number of in-flight requests and responses must also be given for streaming requests. The "Connection" returned manages the mux-clients. Requests issued to the connection will be sent to the remote. * `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)` performs a single request and returns the result. Any deadline provided on the request is forwarded to the server, and canceling the context will make the function return at once. * `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)` will initiate a remote call and send the initial payload. ```Go // A Stream is a two-way stream. // All responses *must* be read by the caller. // If the call is canceled through the context, //The appropriate error will be returned. type Stream struct { // Responses from the remote server. // Channel will be closed after an error or when the remote closes. // All responses *must* be read by the caller until either an error is returned or the channel is closed. // Canceling the context will cause the context cancellation error to be returned. Responses <-chan Response // Requests sent to the server. // If the handler is defined with 0 incoming capacity this will be nil. // Channel *must* be closed to signal the end of the stream. // If the request context is canceled, the stream will no longer process requests. Requests chan<- []byte } type Response struct { Msg []byte Err error } ``` There are generic versions of the server/client handlers that allow the use of type safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
w.WriteHeader(http.StatusInternalServerError)
}
}()
if debugPrint {
fmt.Printf("grid: Got a %s request for: %v\n", req.Method, req.URL)
}
ctx := req.Context()
if err := m.authRequest(req); err != nil {
gridLogOnceIf(ctx, fmt.Errorf("auth %s: %w", req.RemoteAddr, err), req.RemoteAddr+err.Error())
perf: websocket grid connectivity for all internode communication (#18461) This PR adds a WebSocket grid feature that allows servers to communicate via a single two-way connection. There are two request types: * Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small roundtrips with small payloads. * Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`, which allows for different combinations of full two-way streams with an initial payload. Only a single stream is created between two machines - and there is, as such, no server/client relation since both sides can initiate and handle requests. Which server initiates the request is decided deterministically on the server names. Requests are made through a mux client and server, which handles message passing, congestion, cancelation, timeouts, etc. If a connection is lost, all requests are canceled, and the calling server will try to reconnect. Registered handlers can operate directly on byte slices or use a higher-level generics abstraction. There is no versioning of handlers/clients, and incompatible changes should be handled by adding new handlers. The request path can be changed to a new one for any protocol changes. First, all servers create a "Manager." The manager must know its address as well as all remote addresses. This will manage all connections. To get a connection to any remote, ask the manager to provide it given the remote address using. ``` func (m *Manager) Connection(host string) *Connection ``` All serverside handlers must also be registered on the manager. This will make sure that all incoming requests are served. The number of in-flight requests and responses must also be given for streaming requests. The "Connection" returned manages the mux-clients. Requests issued to the connection will be sent to the remote. * `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)` performs a single request and returns the result. Any deadline provided on the request is forwarded to the server, and canceling the context will make the function return at once. * `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)` will initiate a remote call and send the initial payload. ```Go // A Stream is a two-way stream. // All responses *must* be read by the caller. // If the call is canceled through the context, //The appropriate error will be returned. type Stream struct { // Responses from the remote server. // Channel will be closed after an error or when the remote closes. // All responses *must* be read by the caller until either an error is returned or the channel is closed. // Canceling the context will cause the context cancellation error to be returned. Responses <-chan Response // Requests sent to the server. // If the handler is defined with 0 incoming capacity this will be nil. // Channel *must* be closed to signal the end of the stream. // If the request context is canceled, the stream will no longer process requests. Requests chan<- []byte } type Response struct { Msg []byte Err error } ``` There are generic versions of the server/client handlers that allow the use of type safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
w.WriteHeader(http.StatusForbidden)
return
}
conn, _, _, err := ws.UpgradeHTTP(req, w)
if err != nil {
if debugPrint {
fmt.Printf("grid: Unable to upgrade: %v. http.ResponseWriter is type %T\n", err, w)
}
w.WriteHeader(http.StatusUpgradeRequired)
return
}
// will write an OpConnectResponse message to the remote and log it once locally.
writeErr := func(err error) {
if err == nil {
return
}
gridLogOnceIf(ctx, err, err.Error())
resp := connectResp{
ID: m.ID,
Accepted: false,
RejectedReason: err.Error(),
}
if b, err := resp.MarshalMsg(nil); err == nil {
msg := message{
Op: OpConnectResponse,
Payload: b,
}
if b, err := msg.MarshalMsg(nil); err == nil {
wsutil.WriteMessage(conn, ws.StateServerSide, ws.OpBinary, b)
}
}
}
perf: websocket grid connectivity for all internode communication (#18461) This PR adds a WebSocket grid feature that allows servers to communicate via a single two-way connection. There are two request types: * Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small roundtrips with small payloads. * Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`, which allows for different combinations of full two-way streams with an initial payload. Only a single stream is created between two machines - and there is, as such, no server/client relation since both sides can initiate and handle requests. Which server initiates the request is decided deterministically on the server names. Requests are made through a mux client and server, which handles message passing, congestion, cancelation, timeouts, etc. If a connection is lost, all requests are canceled, and the calling server will try to reconnect. Registered handlers can operate directly on byte slices or use a higher-level generics abstraction. There is no versioning of handlers/clients, and incompatible changes should be handled by adding new handlers. The request path can be changed to a new one for any protocol changes. First, all servers create a "Manager." The manager must know its address as well as all remote addresses. This will manage all connections. To get a connection to any remote, ask the manager to provide it given the remote address using. ``` func (m *Manager) Connection(host string) *Connection ``` All serverside handlers must also be registered on the manager. This will make sure that all incoming requests are served. The number of in-flight requests and responses must also be given for streaming requests. The "Connection" returned manages the mux-clients. Requests issued to the connection will be sent to the remote. * `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)` performs a single request and returns the result. Any deadline provided on the request is forwarded to the server, and canceling the context will make the function return at once. * `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)` will initiate a remote call and send the initial payload. ```Go // A Stream is a two-way stream. // All responses *must* be read by the caller. // If the call is canceled through the context, //The appropriate error will be returned. type Stream struct { // Responses from the remote server. // Channel will be closed after an error or when the remote closes. // All responses *must* be read by the caller until either an error is returned or the channel is closed. // Canceling the context will cause the context cancellation error to be returned. Responses <-chan Response // Requests sent to the server. // If the handler is defined with 0 incoming capacity this will be nil. // Channel *must* be closed to signal the end of the stream. // If the request context is canceled, the stream will no longer process requests. Requests chan<- []byte } type Response struct { Msg []byte Err error } ``` There are generic versions of the server/client handlers that allow the use of type safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
defer conn.Close()
if debugPrint {
fmt.Printf("grid: Upgraded request: %v\n", req.URL)
}
msg, _, err := wsutil.ReadClientData(conn)
if err != nil {
writeErr(fmt.Errorf("reading connect: %w", err))
w.WriteHeader(http.StatusForbidden)
perf: websocket grid connectivity for all internode communication (#18461) This PR adds a WebSocket grid feature that allows servers to communicate via a single two-way connection. There are two request types: * Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small roundtrips with small payloads. * Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`, which allows for different combinations of full two-way streams with an initial payload. Only a single stream is created between two machines - and there is, as such, no server/client relation since both sides can initiate and handle requests. Which server initiates the request is decided deterministically on the server names. Requests are made through a mux client and server, which handles message passing, congestion, cancelation, timeouts, etc. If a connection is lost, all requests are canceled, and the calling server will try to reconnect. Registered handlers can operate directly on byte slices or use a higher-level generics abstraction. There is no versioning of handlers/clients, and incompatible changes should be handled by adding new handlers. The request path can be changed to a new one for any protocol changes. First, all servers create a "Manager." The manager must know its address as well as all remote addresses. This will manage all connections. To get a connection to any remote, ask the manager to provide it given the remote address using. ``` func (m *Manager) Connection(host string) *Connection ``` All serverside handlers must also be registered on the manager. This will make sure that all incoming requests are served. The number of in-flight requests and responses must also be given for streaming requests. The "Connection" returned manages the mux-clients. Requests issued to the connection will be sent to the remote. * `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)` performs a single request and returns the result. Any deadline provided on the request is forwarded to the server, and canceling the context will make the function return at once. * `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)` will initiate a remote call and send the initial payload. ```Go // A Stream is a two-way stream. // All responses *must* be read by the caller. // If the call is canceled through the context, //The appropriate error will be returned. type Stream struct { // Responses from the remote server. // Channel will be closed after an error or when the remote closes. // All responses *must* be read by the caller until either an error is returned or the channel is closed. // Canceling the context will cause the context cancellation error to be returned. Responses <-chan Response // Requests sent to the server. // If the handler is defined with 0 incoming capacity this will be nil. // Channel *must* be closed to signal the end of the stream. // If the request context is canceled, the stream will no longer process requests. Requests chan<- []byte } type Response struct { Msg []byte Err error } ``` There are generic versions of the server/client handlers that allow the use of type safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
return
}
if debugPrint {
fmt.Printf("%s handler: Got message, length %v\n", m.local, len(msg))
}
var message message
_, _, err = message.parse(msg)
if err != nil {
writeErr(fmt.Errorf("error parsing grid connect: %w", err))
perf: websocket grid connectivity for all internode communication (#18461) This PR adds a WebSocket grid feature that allows servers to communicate via a single two-way connection. There are two request types: * Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small roundtrips with small payloads. * Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`, which allows for different combinations of full two-way streams with an initial payload. Only a single stream is created between two machines - and there is, as such, no server/client relation since both sides can initiate and handle requests. Which server initiates the request is decided deterministically on the server names. Requests are made through a mux client and server, which handles message passing, congestion, cancelation, timeouts, etc. If a connection is lost, all requests are canceled, and the calling server will try to reconnect. Registered handlers can operate directly on byte slices or use a higher-level generics abstraction. There is no versioning of handlers/clients, and incompatible changes should be handled by adding new handlers. The request path can be changed to a new one for any protocol changes. First, all servers create a "Manager." The manager must know its address as well as all remote addresses. This will manage all connections. To get a connection to any remote, ask the manager to provide it given the remote address using. ``` func (m *Manager) Connection(host string) *Connection ``` All serverside handlers must also be registered on the manager. This will make sure that all incoming requests are served. The number of in-flight requests and responses must also be given for streaming requests. The "Connection" returned manages the mux-clients. Requests issued to the connection will be sent to the remote. * `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)` performs a single request and returns the result. Any deadline provided on the request is forwarded to the server, and canceling the context will make the function return at once. * `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)` will initiate a remote call and send the initial payload. ```Go // A Stream is a two-way stream. // All responses *must* be read by the caller. // If the call is canceled through the context, //The appropriate error will be returned. type Stream struct { // Responses from the remote server. // Channel will be closed after an error or when the remote closes. // All responses *must* be read by the caller until either an error is returned or the channel is closed. // Canceling the context will cause the context cancellation error to be returned. Responses <-chan Response // Requests sent to the server. // If the handler is defined with 0 incoming capacity this will be nil. // Channel *must* be closed to signal the end of the stream. // If the request context is canceled, the stream will no longer process requests. Requests chan<- []byte } type Response struct { Msg []byte Err error } ``` There are generic versions of the server/client handlers that allow the use of type safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
return
}
if message.Op != OpConnect {
writeErr(fmt.Errorf("unexpected connect op: %v", message.Op))
perf: websocket grid connectivity for all internode communication (#18461) This PR adds a WebSocket grid feature that allows servers to communicate via a single two-way connection. There are two request types: * Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small roundtrips with small payloads. * Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`, which allows for different combinations of full two-way streams with an initial payload. Only a single stream is created between two machines - and there is, as such, no server/client relation since both sides can initiate and handle requests. Which server initiates the request is decided deterministically on the server names. Requests are made through a mux client and server, which handles message passing, congestion, cancelation, timeouts, etc. If a connection is lost, all requests are canceled, and the calling server will try to reconnect. Registered handlers can operate directly on byte slices or use a higher-level generics abstraction. There is no versioning of handlers/clients, and incompatible changes should be handled by adding new handlers. The request path can be changed to a new one for any protocol changes. First, all servers create a "Manager." The manager must know its address as well as all remote addresses. This will manage all connections. To get a connection to any remote, ask the manager to provide it given the remote address using. ``` func (m *Manager) Connection(host string) *Connection ``` All serverside handlers must also be registered on the manager. This will make sure that all incoming requests are served. The number of in-flight requests and responses must also be given for streaming requests. The "Connection" returned manages the mux-clients. Requests issued to the connection will be sent to the remote. * `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)` performs a single request and returns the result. Any deadline provided on the request is forwarded to the server, and canceling the context will make the function return at once. * `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)` will initiate a remote call and send the initial payload. ```Go // A Stream is a two-way stream. // All responses *must* be read by the caller. // If the call is canceled through the context, //The appropriate error will be returned. type Stream struct { // Responses from the remote server. // Channel will be closed after an error or when the remote closes. // All responses *must* be read by the caller until either an error is returned or the channel is closed. // Canceling the context will cause the context cancellation error to be returned. Responses <-chan Response // Requests sent to the server. // If the handler is defined with 0 incoming capacity this will be nil. // Channel *must* be closed to signal the end of the stream. // If the request context is canceled, the stream will no longer process requests. Requests chan<- []byte } type Response struct { Msg []byte Err error } ``` There are generic versions of the server/client handlers that allow the use of type safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
return
}
var cReq connectReq
_, err = cReq.UnmarshalMsg(message.Payload)
if err != nil {
writeErr(fmt.Errorf("error parsing connectReq: %w", err))
perf: websocket grid connectivity for all internode communication (#18461) This PR adds a WebSocket grid feature that allows servers to communicate via a single two-way connection. There are two request types: * Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small roundtrips with small payloads. * Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`, which allows for different combinations of full two-way streams with an initial payload. Only a single stream is created between two machines - and there is, as such, no server/client relation since both sides can initiate and handle requests. Which server initiates the request is decided deterministically on the server names. Requests are made through a mux client and server, which handles message passing, congestion, cancelation, timeouts, etc. If a connection is lost, all requests are canceled, and the calling server will try to reconnect. Registered handlers can operate directly on byte slices or use a higher-level generics abstraction. There is no versioning of handlers/clients, and incompatible changes should be handled by adding new handlers. The request path can be changed to a new one for any protocol changes. First, all servers create a "Manager." The manager must know its address as well as all remote addresses. This will manage all connections. To get a connection to any remote, ask the manager to provide it given the remote address using. ``` func (m *Manager) Connection(host string) *Connection ``` All serverside handlers must also be registered on the manager. This will make sure that all incoming requests are served. The number of in-flight requests and responses must also be given for streaming requests. The "Connection" returned manages the mux-clients. Requests issued to the connection will be sent to the remote. * `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)` performs a single request and returns the result. Any deadline provided on the request is forwarded to the server, and canceling the context will make the function return at once. * `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)` will initiate a remote call and send the initial payload. ```Go // A Stream is a two-way stream. // All responses *must* be read by the caller. // If the call is canceled through the context, //The appropriate error will be returned. type Stream struct { // Responses from the remote server. // Channel will be closed after an error or when the remote closes. // All responses *must* be read by the caller until either an error is returned or the channel is closed. // Canceling the context will cause the context cancellation error to be returned. Responses <-chan Response // Requests sent to the server. // If the handler is defined with 0 incoming capacity this will be nil. // Channel *must* be closed to signal the end of the stream. // If the request context is canceled, the stream will no longer process requests. Requests chan<- []byte } type Response struct { Msg []byte Err error } ``` There are generic versions of the server/client handlers that allow the use of type safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
return
}
remote := m.targets[cReq.Host]
if remote == nil {
writeErr(fmt.Errorf("unknown incoming host: %v", cReq.Host))
perf: websocket grid connectivity for all internode communication (#18461) This PR adds a WebSocket grid feature that allows servers to communicate via a single two-way connection. There are two request types: * Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small roundtrips with small payloads. * Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`, which allows for different combinations of full two-way streams with an initial payload. Only a single stream is created between two machines - and there is, as such, no server/client relation since both sides can initiate and handle requests. Which server initiates the request is decided deterministically on the server names. Requests are made through a mux client and server, which handles message passing, congestion, cancelation, timeouts, etc. If a connection is lost, all requests are canceled, and the calling server will try to reconnect. Registered handlers can operate directly on byte slices or use a higher-level generics abstraction. There is no versioning of handlers/clients, and incompatible changes should be handled by adding new handlers. The request path can be changed to a new one for any protocol changes. First, all servers create a "Manager." The manager must know its address as well as all remote addresses. This will manage all connections. To get a connection to any remote, ask the manager to provide it given the remote address using. ``` func (m *Manager) Connection(host string) *Connection ``` All serverside handlers must also be registered on the manager. This will make sure that all incoming requests are served. The number of in-flight requests and responses must also be given for streaming requests. The "Connection" returned manages the mux-clients. Requests issued to the connection will be sent to the remote. * `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)` performs a single request and returns the result. Any deadline provided on the request is forwarded to the server, and canceling the context will make the function return at once. * `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)` will initiate a remote call and send the initial payload. ```Go // A Stream is a two-way stream. // All responses *must* be read by the caller. // If the call is canceled through the context, //The appropriate error will be returned. type Stream struct { // Responses from the remote server. // Channel will be closed after an error or when the remote closes. // All responses *must* be read by the caller until either an error is returned or the channel is closed. // Canceling the context will cause the context cancellation error to be returned. Responses <-chan Response // Requests sent to the server. // If the handler is defined with 0 incoming capacity this will be nil. // Channel *must* be closed to signal the end of the stream. // If the request context is canceled, the stream will no longer process requests. Requests chan<- []byte } type Response struct { Msg []byte Err error } ``` There are generic versions of the server/client handlers that allow the use of type safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
return
}
if debugPrint {
fmt.Printf("handler: Got Connect Req %+v\n", cReq)
}
writeErr(remote.handleIncoming(ctx, conn, cReq))
perf: websocket grid connectivity for all internode communication (#18461) This PR adds a WebSocket grid feature that allows servers to communicate via a single two-way connection. There are two request types: * Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small roundtrips with small payloads. * Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`, which allows for different combinations of full two-way streams with an initial payload. Only a single stream is created between two machines - and there is, as such, no server/client relation since both sides can initiate and handle requests. Which server initiates the request is decided deterministically on the server names. Requests are made through a mux client and server, which handles message passing, congestion, cancelation, timeouts, etc. If a connection is lost, all requests are canceled, and the calling server will try to reconnect. Registered handlers can operate directly on byte slices or use a higher-level generics abstraction. There is no versioning of handlers/clients, and incompatible changes should be handled by adding new handlers. The request path can be changed to a new one for any protocol changes. First, all servers create a "Manager." The manager must know its address as well as all remote addresses. This will manage all connections. To get a connection to any remote, ask the manager to provide it given the remote address using. ``` func (m *Manager) Connection(host string) *Connection ``` All serverside handlers must also be registered on the manager. This will make sure that all incoming requests are served. The number of in-flight requests and responses must also be given for streaming requests. The "Connection" returned manages the mux-clients. Requests issued to the connection will be sent to the remote. * `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)` performs a single request and returns the result. Any deadline provided on the request is forwarded to the server, and canceling the context will make the function return at once. * `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)` will initiate a remote call and send the initial payload. ```Go // A Stream is a two-way stream. // All responses *must* be read by the caller. // If the call is canceled through the context, //The appropriate error will be returned. type Stream struct { // Responses from the remote server. // Channel will be closed after an error or when the remote closes. // All responses *must* be read by the caller until either an error is returned or the channel is closed. // Canceling the context will cause the context cancellation error to be returned. Responses <-chan Response // Requests sent to the server. // If the handler is defined with 0 incoming capacity this will be nil. // Channel *must* be closed to signal the end of the stream. // If the request context is canceled, the stream will no longer process requests. Requests chan<- []byte } type Response struct { Msg []byte Err error } ``` There are generic versions of the server/client handlers that allow the use of type safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
}
}
// AuthFn should provide an authentication string for the given aud.
type AuthFn func(aud string) string
// Connection will return the connection for the specified host.
// If the host does not exist nil will be returned.
func (m *Manager) Connection(host string) *Connection {
return m.targets[host]
}
// RegisterSingleHandler will register a stateless handler that serves
// []byte -> ([]byte, error) requests.
// subroutes are joined with "/" to a single subroute.
func (m *Manager) RegisterSingleHandler(id HandlerID, h SingleHandlerFn, subroute ...string) error {
if !id.valid() {
return ErrUnknownHandler
}
s := strings.Join(subroute, "/")
if debugPrint {
fmt.Println("RegisterSingleHandler: ", id.String(), "subroute:", s)
}
if len(subroute) == 0 {
if m.handlers.hasAny(id) && !id.isTestHandler() {
return fmt.Errorf("handler %v: %w", id.String(), ErrHandlerAlreadyExists)
perf: websocket grid connectivity for all internode communication (#18461) This PR adds a WebSocket grid feature that allows servers to communicate via a single two-way connection. There are two request types: * Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small roundtrips with small payloads. * Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`, which allows for different combinations of full two-way streams with an initial payload. Only a single stream is created between two machines - and there is, as such, no server/client relation since both sides can initiate and handle requests. Which server initiates the request is decided deterministically on the server names. Requests are made through a mux client and server, which handles message passing, congestion, cancelation, timeouts, etc. If a connection is lost, all requests are canceled, and the calling server will try to reconnect. Registered handlers can operate directly on byte slices or use a higher-level generics abstraction. There is no versioning of handlers/clients, and incompatible changes should be handled by adding new handlers. The request path can be changed to a new one for any protocol changes. First, all servers create a "Manager." The manager must know its address as well as all remote addresses. This will manage all connections. To get a connection to any remote, ask the manager to provide it given the remote address using. ``` func (m *Manager) Connection(host string) *Connection ``` All serverside handlers must also be registered on the manager. This will make sure that all incoming requests are served. The number of in-flight requests and responses must also be given for streaming requests. The "Connection" returned manages the mux-clients. Requests issued to the connection will be sent to the remote. * `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)` performs a single request and returns the result. Any deadline provided on the request is forwarded to the server, and canceling the context will make the function return at once. * `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)` will initiate a remote call and send the initial payload. ```Go // A Stream is a two-way stream. // All responses *must* be read by the caller. // If the call is canceled through the context, //The appropriate error will be returned. type Stream struct { // Responses from the remote server. // Channel will be closed after an error or when the remote closes. // All responses *must* be read by the caller until either an error is returned or the channel is closed. // Canceling the context will cause the context cancellation error to be returned. Responses <-chan Response // Requests sent to the server. // If the handler is defined with 0 incoming capacity this will be nil. // Channel *must* be closed to signal the end of the stream. // If the request context is canceled, the stream will no longer process requests. Requests chan<- []byte } type Response struct { Msg []byte Err error } ``` There are generic versions of the server/client handlers that allow the use of type safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
}
m.handlers.single[id] = h
return nil
}
subID := makeSubHandlerID(id, s)
if m.handlers.hasSubhandler(subID) && !id.isTestHandler() {
return fmt.Errorf("handler %v, subroute:%v: %w", id.String(), s, ErrHandlerAlreadyExists)
perf: websocket grid connectivity for all internode communication (#18461) This PR adds a WebSocket grid feature that allows servers to communicate via a single two-way connection. There are two request types: * Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small roundtrips with small payloads. * Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`, which allows for different combinations of full two-way streams with an initial payload. Only a single stream is created between two machines - and there is, as such, no server/client relation since both sides can initiate and handle requests. Which server initiates the request is decided deterministically on the server names. Requests are made through a mux client and server, which handles message passing, congestion, cancelation, timeouts, etc. If a connection is lost, all requests are canceled, and the calling server will try to reconnect. Registered handlers can operate directly on byte slices or use a higher-level generics abstraction. There is no versioning of handlers/clients, and incompatible changes should be handled by adding new handlers. The request path can be changed to a new one for any protocol changes. First, all servers create a "Manager." The manager must know its address as well as all remote addresses. This will manage all connections. To get a connection to any remote, ask the manager to provide it given the remote address using. ``` func (m *Manager) Connection(host string) *Connection ``` All serverside handlers must also be registered on the manager. This will make sure that all incoming requests are served. The number of in-flight requests and responses must also be given for streaming requests. The "Connection" returned manages the mux-clients. Requests issued to the connection will be sent to the remote. * `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)` performs a single request and returns the result. Any deadline provided on the request is forwarded to the server, and canceling the context will make the function return at once. * `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)` will initiate a remote call and send the initial payload. ```Go // A Stream is a two-way stream. // All responses *must* be read by the caller. // If the call is canceled through the context, //The appropriate error will be returned. type Stream struct { // Responses from the remote server. // Channel will be closed after an error or when the remote closes. // All responses *must* be read by the caller until either an error is returned or the channel is closed. // Canceling the context will cause the context cancellation error to be returned. Responses <-chan Response // Requests sent to the server. // If the handler is defined with 0 incoming capacity this will be nil. // Channel *must* be closed to signal the end of the stream. // If the request context is canceled, the stream will no longer process requests. Requests chan<- []byte } type Response struct { Msg []byte Err error } ``` There are generic versions of the server/client handlers that allow the use of type safe implementations for data types that support msgpack marshal/unmarshal.
2023-11-20 20:09:35 -05:00
}
m.handlers.subSingle[subID] = h
// Copy so clients can also pick it up for other subpaths.
m.handlers.subSingle[makeZeroSubHandlerID(id)] = h
return nil
}
/*
// RegisterStateless will register a stateless handler that serves
// []byte -> stream of ([]byte, error) requests.
func (m *Manager) RegisterStateless(id HandlerID, h StatelessHandler) error {
if !id.valid() {
return ErrUnknownHandler
}
if m.handlers.hasAny(id) && !id.isTestHandler() {
return ErrHandlerAlreadyExists
}
m.handlers.stateless[id] = &h
return nil
}
*/
// RegisterStreamingHandler will register a stateless handler that serves
// two-way streaming requests.
func (m *Manager) RegisterStreamingHandler(id HandlerID, h StreamHandler) error {
if !id.valid() {
return ErrUnknownHandler
}
if debugPrint {
fmt.Println("RegisterStreamingHandler: subroute:", h.Subroute)
}
if h.Subroute == "" {
if m.handlers.hasAny(id) && !id.isTestHandler() {
return ErrHandlerAlreadyExists
}
m.handlers.streams[id] = &h
return nil
}
subID := makeSubHandlerID(id, h.Subroute)
if m.handlers.hasSubhandler(subID) && !id.isTestHandler() {
return ErrHandlerAlreadyExists
}
m.handlers.subStreams[subID] = &h
// Copy so clients can also pick it up for other subpaths.
m.handlers.subStreams[makeZeroSubHandlerID(id)] = &h
return nil
}
// HostName returns the name of the local host.
func (m *Manager) HostName() string {
return m.local
}
// Targets returns the names of all remote targets.
func (m *Manager) Targets() []string {
var res []string
for k := range m.targets {
res = append(res, k)
}
return res
}
// debugMsg should *only* be used by tests.
//
//lint:ignore U1000 This is used by tests.
func (m *Manager) debugMsg(d debugMsg, args ...any) {
for _, c := range m.targets {
c.debugMsg(d, args...)
}
}