### SNMPWALK HELP ####
snmpwalk -v2c -c rouser987 ip_hostname
snmpwalk -v3  -l authPriv -u rouser987 -a SHA -A "pass1"  -x AES -X "pass2" ip_hostname

# IF USING CENTOS
yum install -y net-snmp

# IF USING DEBIAN
apt install -y snmpd

systemctl start snmpd
systemctl stop snmpd
systemctl enable snmpd

cp /etc/snmp/snmpd.conf /etc/snmp/snmpd.conf.orig
echo "" > /etc/snmp/snmpd.conf
curl -o /etc/snmp/distro https://raw.githubusercontent.com/librenms/librenms-agent/master/snmp/distro
chmod +x /etc/snmp/distro
nano /etc/snmp/snmpd.conf


# IF SERVER REMOTE #
agentaddress udp:16161

rouser rouser987

syslocation VMENV | LOCATION
syscontact EMAIL
sysname CHANGENAMEHERE

#Distro Detection
extend .1.3.6.1.4.1.2021.7890.1 distro /etc/snmp/distro
#Hardware Detection (uncomment to enable)
extend .1.3.6.1.4.1.2021.7890.2 hardware '/bin/cat /sys/devices/virtual/dmi/id/product_name'
extend .1.3.6.1.4.1.2021.7890.3 manufacturer '/bin/cat /sys/devices/virtual/dmi/id/sys_vendor'
#extend .1.3.6.1.4.1.2021.7890.4 serial '/bin/cat /sys/devices/virtual/dmi/id/product_serial'
# END REMOTE

# IF SERVER LOCAL #
agentaddress udp:161

rouser rouser987

syslocation VMENV | LOCATION
syscontact EMAIL
sysname CHANGENAMEHERE

#Distro Detection
extend .1.3.6.1.4.1.2021.7890.1 distro /etc/snmp/distro
#Hardware Detection (uncomment to enable)
extend .1.3.6.1.4.1.2021.7890.2 hardware '/bin/cat /sys/devices/virtual/dmi/id/product_name'
extend .1.3.6.1.4.1.2021.7890.3 manufacturer '/bin/cat /sys/devices/virtual/dmi/id/sys_vendor'
#extend .1.3.6.1.4.1.2021.7890.4 serial '/bin/cat /sys/devices/virtual/dmi/id/product_serial'
# END LOCAL


# no longer needed, replaced with the below
## nano /var/lib/net-snmp/snmpd.conf

# no longer needed, replaced with the below
## createUser rouser987 SHA "rd1" AES "password2"

# IF USING CENTOS This creates a random password1 and password 2. I like to log the output somewhere that way I have the info if I need it later #
echo "createUser rouser987 SHA \""$(tr -cd '[:alnum:]' < /dev/urandom | fold -w50 | head -n1)"\" AES \""$(tr -cd '[:alnum:]' < /dev/urandom | fold -w50 | head -n1)"\"" | tee -a /var/lib/net-snmp/snmpd.conf

# IF USING DEBIAN This creates a random password1 and password 2. I like to log the output somewhere that way I have the info if I need it later #
echo "createUser rouser987 SHA \""$(tr -cd '[:alnum:]' < /dev/urandom | fold -w50 | head -n1)"\" AES \""$(tr -cd '[:alnum:]' < /dev/urandom | fold -w50 | head -n1)"\"" | tee -a /var/lib/snmp/snmpd.conf
systemctl start snmpd

#### IF THERE'S FIREWALL-CMD ####
# IF IT'S A LOCAL SERVER #
nano /etc/firewalld/services/snmp.xml 

# Paste the below in the file


  SNMP
  SNMP protocol
  


firewall-cmd --reload

firewall-cmd --zone=public --add-service snmp --permanent

# IF IT'S A REMOTE SERVER #
firewall-cmd --permanent --zone=public --add-rich-rule='
  rule family="ipv4"
  source address="LOCALIP"
  port protocol="udp" port="16161" accept'

# ON LOCAL AND REMOTE #
firewall-cmd --reload

#### IF THERE'S IPTABLES ####
# IF IT'S LOCAL
iptables -A INPUT -p udp --dport 161 -j ACCEPT
# Then save the rules however you would do it

# IF IT'S REMOTE
iptables -A INPUT -p udp -s LOCALIP --dport 16161 -j ACCEPT
# Then save the rules however you would do it