I initially chose SameSite=Lax because I thought if a user followed a
link to the landing page, the landing page's ajax requests wouldn't send
the cookie. But I just did an experiment, and that's not true. Only the
initial page load (of a .html file) lacks the cookie. All of its
resources and ajax requests send the cookie. I'm not sure about
document.cookie accesses, but my cookie is HttpOnly anyway, so it's
irrelevant. So no reason to be lax.
newTimeFormat didn't handle newTimeZone not having been called well.
Restore the prior behavior of having called newTimeZone(null), which was
apparently good enough.
I just ran a "cargo test" on this after a round of tweaks, not
"cargo test --all", so I missed compile errors in the db crate,
and a Javascript lint config error. travis-ci caught these.
Some caveats:
* it doesn't record the peer IP yet, which makes it harder to verify
sessions are valid. This is a little annoying to do in hyper now
(see hyperium/hyper#1410). The direct peer might not be what we want
right now anyway because there's no TLS support yet (see #27). In
the meantime, the sane way to expose Moonfire NVR to the Internet is
via a proxy server, and recording the proxy's IP is not useful.
Maybe better to interpret a RFC 7239 Forwarded header (and/or
the older X-Forwarded-{For,Proto} headers).
* it doesn't ever use Secure (https-only) cookies, for a similar reason.
It's not safe to use even with a tls proxy until this is fixed.
* there's no "moonfire-nvr config" support for inspecting/invalidating
sessions yet.
* in debug builds, logging in is crazy slow. See libpasta/libpasta#9.
Some notes:
* I removed the Javascript "no-use-before-defined" lint, as some of
the functions form a cycle.
* Fixed#20 along the way. I needed to add support for properly
returning non-OK HTTP statuses to signal unauthorized and such.
* I removed the Access-Control-Allow-Origin header support, which was
at odds with the "SameSite=lax" in the cookie header. The "yarn
start" method for running a local proxy server accomplishes the same
thing as the Access-Control-Allow-Origin support in a more secure
manner.
Fixes#62
* added travis config for latest node as well as 8.
* ran "yarn upgrade -P webpack-dev-server", which caused the upath
dependency to be upgraded. I arrived at this by inspecting yarn.lock
for the things depending on upack, along with some trial and error.
("yarn upgrade -P chokidar" was less successful.)
Fixes#60
The reqwest dependency is significant because the old version required
an old version of openssl, complicating compilation on newer platforms.
reqwest also pulled in old/duplicate versions of hyper, tokio, etc.
Nice to drop a lot of that cruft.
I left rusqlite and uuid alone because they had breaking changes I
didn't want to mess with at the moment.
Bumped the minimum Rust version to 1.30.0, as required by the
new encoding_rs crate (and perhaps other things).
1.26 doesn't work with the updated rusqlite:
error[E0658]: use of unstable library feature 'duration_extras' (see issue #46507)
--> /home/travis/.cargo/registry/src/github.com-1ecc6299db9ec823/rusqlite-0.14.0/src/busy.rs:26:49
|
26 | .and_then(|t| t.checked_add(timeout.subsec_millis().into()))
| ^^^^^^^^^^^^^
1.25 also fails with the upgraded reffers because u128 isn't stable:
error[E0658]: 128-bit type is unstable (see issue #35118)
--> /home/travis/.cargo/git/checkouts/reffers-rs-0d00fc7f893338b3/49a4d75/src/rc_bitmask.rs:194:34
|
194 | rc_bit_mask_internal!(primitive, u128, 42, 42, 42);
| ^^^^
travis-ci pointed out that building with 1.21 broke with a recent dep
upgrade (8c52c36). reffers now uses nested groups of imports, which is a
feature introduced with Rust 1.25. Prior to 1.25, it fails as follows:
error: expected one of `,` or `as`, found `::`
--> /home/travis/.cargo/git/checkouts/reffers-rs-0d00fc7f893338b3/49a4d75/src/arc.rs:6:46
|
6 | use std::sync::atomic::{AtomicUsize, Ordering::SeqCst};
| ^^ expected one of `,` or `as` here
* install.md, install-manual.md, and easy-install.md had a lot of
redundancy. Rework them so the common prefix and suffix are in
install.md and it's clear when to navigate back and forth. This
removes from very stale references to prep.sh and cameras.sql in
install-manual.md (which never should have mentioned these scripts
anyway).
* remove all the SAMPLE_MEDIA_DIR, SAMPLE_FILE_DIR, and
SAMPLE_FILE_PATH stuff from the scripts. This was too complicated
(one variable will suffice) and inconsistent in terminology (a
couple "samples dir" occurrences slipped through review; they
should have been "sample file dir"). It also wasn't really useful
enough because the procedure for a mount point is manual anyway,
and because some installs will have multiple sample file dirs
anyway.
* in the mount point procedure, fix the paths to be consistent. Also
describe the "nofail" and "Requires=" config I have on my machine.
* fix some incorrect info about how to use "moonfire-nvr config" and
describe "flush_if_sec".
This is a minor code size reduction - instead of being monomorphized
into four variants (according to "cargo llvm-lines"), it's now
monomorphized into two. The stripped release binary on macOS is about
8kB smaller (0.15%). Not a huge improvement but better than nothing.
Benchmarks seem unchanged (though they have a lot of variance).
There was a race condition here because it wasn't waiting for the db
flush to complete. This made write_path_retries sometimes not reflect
the consequence of the flush, causing an assertion failure. I assume it
was also responsible for gc_path_retries timeouts under travis-ci.
* upgrade min required rust to 1.21; crossbeam-deque requires the
ord_max_min feature, apparently stabilized in this version.
* use "make --jobs=2" to build ffmpeg so it goes faster.
https://docs.travis-ci.com/user/reference/overview/ says there are 2
cores available.
* upgrade minimum required Rust from 1.17 to 1.20; reffers 0.4.2
apparently uses std::mem::ManuallyDrop, introduced in 1.20
* install ffmpeg from source (requiring sudo access) rather than using
the ancient one from Ubuntu Trusty to meet the minimum version
requirements specified in ffmpeg/build.rs.
* add back in button.css (broken with f5aa008)
* remove a redundant .png file-loader which apparently caused the .png
asset to not load properly (broken with f5aa008)
The Rust portions of the merge are straightforward, but the Javascript
is not. The new-schema branch is based on my hacky prototype UI; the
master branch is based on Dolf's rewrite. I attempted to match the
new-schema changes in Dolf's new structure.
I want to use hyper::server::Request::bytes_mut(), so an update is
needed. Update everything at once. Most notably, the http-serve update
starts using the http crate types for some things. (More to come.)
* A little more UI refactor, cleanup, eslint more strict
* Split out imports for jQuery components and put them where needed.
* No longer do all of it in application module.
* Prepares better for code splitting.
* Split out video player dialog
* Simplifies jquery-ui dependencies for code splitting
* Simplifies code
* Configure to generate more, but smaller bundles.
* Setup some more strict eslint settings
* Fix css to import rather than require
* Change settings to correctly support tree shaking in production build
Signed-off-by: Dolf Starreveld <dolf@starreveld.com>
* Remove “old” code from TimeFormatter
* Accidentally left behind due to overlapping PRs
Signed-off-by: Dolf Starreveld <dolf@starreveld.com>
* Dockerfile which allows full build on ubuntu
* No cross-compile yet
* Fixed build scripts bug found with docker
Signed-off-by: Dolf Starreveld <dolf@starreveld.com>
