This is effective both for Chrome's "Save As" dialog and for curl -OJ.
It makes the filename like 20190717135519-driveway-main.mp4 rather than
view.mp4 (Chrome) or view.mp4?s=33-36&ts=true (Curl).
The reqwest one is particularly notable because it means not having two
versions of hyper/http/tokio/futures/bytes. It also drops a number of
transitive deps; with some work I think I could stop depending on regex
now.
This doesn't take much advantage of async fns so far. For example, the
with_{form,json}_body functions are still designed to be used with
future combinators when it'd be more natural to call them from async
fns now. But it's a start.
Similarly, this still uses the old version of reqwest. Small steps.
Requires Rust 1.40 now. (1.39 is a requirement of async, and 1.40 is a
requirement of http-serve 0.2.0.)
The codec -> codecpar move was sufficiently long ago (libavformat
57.5.0 on 2016-04-11) that I think we can just get away with requiring
the new version. Let's try it.
But if someone complains, AVCodecParameters and AVCodecContext look
sufficiently similar we could probably just use one or the other based on
the version we're compiling with.
This addressed a deprecation warning on nightly (will be in Rust 1.38).
Use parking_lot instead, which in theory is faster (although I doubt
it's significant here).
Add a new schema version 5; now 4 means the directory meta may or may
not be upgraded.
Fixes#65: now it's possible to open the directory even if it lies on a
completely full disk.
My dad's "GW-GW4089IP" cameras use separate ports for the main and sub
streams:
rtsp://192.168.1.110:5050/H264?channel=0&subtype=0&unicast=true&proto=Onvif
rtsp://192.168.1.110:5049/H264?channel=0&subtype=1&unicast=true&proto=Onvif
Previously I could get one of the streams to work by including :5050 or
:5049 in the host field of the camera. But not both. Now make the
camera's host field reflect the ONVIF port (which is also non-standard
on these cameras, :85). It's not directly used yet but probably will be
sooner or later. Make each stream know its full URL.
This delegates to the "sqlite3" CLI but has a couple benefits over using
sqlite3 directly:
* safer because it does the same locking as other moonfire-nvr invocations
* more convenient because it takes the same argument format as other
moonfire-nvr subcommands:
* --db-dir rather than full path including /db suffix
* has the --db-dir default value
* --read-only rather than file:...?mode=ro
Use like "moonfire-nvr sql" or "moonfire-nvr sql --read-only".
(I also considered the names "capabilities" and "scopes", but I think
"permissions" is the most widely understood.)
This is increasingly necessary as the web API becomes more capable.
Among other things, it allows:
* non-administrator users who can view but not access camera passwords
or change any state
* workers that update signal state based on cameras' built-in motion
detection or a security system's events but don't need to view videos
* control over what can be done without authenticating
Currently session permissions are just copied from user permissions, but
you can also imagine admin sessions vs not, as a checkbox when signing
in. This would match the standard Unix workflow of using a
non-administrative session most of the time.
Relevant to my current signals work (#28) and to the addition of an
administrative API (#35, including #66).
This is a definite work in progress. In particular,
* there's no src/web.rs support yet so it can't be used,
* the code is surprisingly complex, and there's almost no tests so far.
I want to at least get complete branch coverage.
* I may still go back to time_sec rather than time_90k to save RAM and
flash.
I simplified the approach a bit from the earlier goal in design/api.md.
In particular, there's no longer the separate concept of "observation"
vs "prediction". Now the predictions are just observations that extend a
bit beyond now. They may be flushed prematurely and I'll try living with
that to avoid making things even more complex.
This is mostly untested and useless by itself, but it's a starting
point. In particular:
* there's no way to set up signals or add/remove/update events yet
except by manual changes to the database.
* if you associate a signal with a camera then remove the camera,
hitting /api/ will error out.
My installation recently somehow ended up with a recording with a
duration of 503793844 90,000ths of a second, way over the maximum of 5
minutes. (Looks like the machine was pretty unresponsive at the time
and/or having network problems.)
When this happens, the system really spirals. Every flush afterward (12
per minute with my installation) fails with a CHECK constraint failure
on the recording table. It never gives up on that recording. /var/log
fills pretty quickly as this failure is extremely verbose (a stack
trace, and a line for each byte of video_index). Eventually the sample
file dirs fill up too as it continues writing video samples while GC is
stuck. The video samples are useless anyway; given that they're not
referenced in the database, they'll be deleted on next startup.
This ensures the offending recording is never added to the database, so
we don't get the same persistent problem. Instead, writing to the
recording will fail. The stream will drop and be retried. If the
underlying condition that caused a too-long recording (many
non-key-frames, or the camera returning a crazy duration, or the
monotonic clock jumping forward extremely, or something) has gone away,
the system should recover.
This is so far completely untested, for use by a new UI prototype.
It creates a new URL endpoint which sends one video/mp4 media segment
per key frame, with the dependent frames included. This means there will
be about one key frame interval of latency (typically about a second).
This seems hard to avoid, as mentioned in issue #59.
Use version 1 of the mvhd, tkhd, and mdhd boxes to support 64-bit
durations. 2^32 units / 90,000 units/sec / 60 sec/min / 60 min/hr ~=
13.25 hrs.
Compatibility: looks like Chrome, Firefox, VLC, and ffmepg all support
version 1 with no problem.
Fixes#46. If there are no video_sample_entries, it returns
InvalidArgument, which gets mapped to a HTTP 400. Various other failures
turn into non-500s as well.
There are many places that can & should be using typed errors, but it's
a start.
This is mostly just "cargo fix --edition" + Cargo.toml changes.
There's one fix for upgrading to NLL in db/writer.rs:
Writer::previously_opened wouldn't build with NLL because of a
double-borrow the previous borrow checker somehow didn't catch.
Restructure to avoid it.
I'll put elective NLL changes in a following commit.
Before, this would panic from the reactor thread. After, it returns a
internal server error. Still not ideal, but better.
To return "bad request" as it should, mp4::FileBuilder::build() should
return a new error type that distinguishes "invalid argument" from
"internal" and the like. I'm thinking of using a ErrorKind enum
throughout the program that's similar to grpc::StatusCode.
Apparently with docopt, --require-auth=false doesn't work, so booleans
with a default value of true can't be turned off. Toggle the default to
false to deal with this, for now. I'd prefer the default be true, but
I also would prefer to not use a negative --no-require-auth or
--allow-unauthenticated flag. I think I'll switch from docopt to clap
in the near future; it seems to be what the cool kids use.
The guide is not as quick to follow and amateur-friendly as I'd like. A
few things that might improve matters:
* complete #27 (built-in https+letsencrypt), so that when not sharing
the port, users don't need to use nginx or certbot.
* more ubiquitous IPv6 (out of my control but should happen over
time) to reduce need to share the port
* embed a dynamic DNS client
* support UPnP Internet Gateway Device Control Protocol (if common
routers have this enabled? probably not for security reasons.)
It's progress, though. Enough that I think I'll merge the auth branch
into master shortly.
I initially chose SameSite=Lax because I thought if a user followed a
link to the landing page, the landing page's ajax requests wouldn't send
the cookie. But I just did an experiment, and that's not true. Only the
initial page load (of a .html file) lacks the cookie. All of its
resources and ajax requests send the cookie. I'm not sure about
document.cookie accesses, but my cookie is HttpOnly anyway, so it's
irrelevant. So no reason to be lax.
Scott Lamb