I did a full `cargo upgrade` and fixed what it broke:
* a couple things for the latest protobuf 3.0 alphas
(note alphas don't promise API stability)
* new minimum supported Rust version
This should have some other nice effects: parking_lot now uses inline
assembler, tokio has gotten faster, etc.
1c9a556 started depending on arrays implementing IntoIterator. I keep
forgetting that 1.52 doesn't support this. There's really no compelling
reason to keep building on 1.52, so don't.
SelectView::set_selection doesn't seem to be working properly. The
symptom is editing an existing camera will clear the sample file dir,
and thus hitting edit without making any changes will fail.
After a frustrating search for a suitable channel to use for shutdown
(tokio::sync:⌚:Receiver and
futures::future::Shared<tokio::sync::oneshot::Receiver> didn't look
quite right) in which I rethought my life decisions, I finally just made
my own (server/base/shutdown.rs). We can easily poll it or wait for it
in async or sync contexts. Most importantly, it's convenient; not that
it really matters here, but it's also efficient.
We now do a slightly better job of propagating a "graceful" shutdown
signal, and this channel will give us tools to improve it over time.
* Shut down even when writer or syncer operations are stuck. Fixes#117
* Not done yet: streamers should instantly shut down without waiting for
a connection attempt or frame or something. I'll probably
implement that when removing --rtsp-library=ffmpeg. The code should be
cleaner then.
* Not done yet: fix a couple places that sleep for up to a second when
they could shut down immediately. I just need to do the plumbing for
mock clocks to work.
I also implemented an immediate shutdown mode, activated by a second
signal. I think this will mitigate the streamer wait situation.
* prefix docker/nvr commands with sudo (fixes#142).
I was just going to link to the docker documentation on setting
up non-root access, but that's kind of a personal preference.
I included a `<details>` about it instead and made all the commands
work with sudo.
* take better advantage of github markdown's code block syntax
highlighting. Use "console" for shell session stuff, put the
"nvr" wrapper script in its own block with "bash".
* add some comments to nvr wrapper script where people need to
make changes and/or will be confused.
* add a `<details>` that talks about shutting down and restarting
the session around `nvr config` (see #151). Still not user-friendly
but at least it's better documented now.
* add the command to create `/usr/local/lib/moonfire-nvr`, necessary
the first time
* have the files owned by root and use world-readable permissions, even
if the building user has a restrictive umask set
* run node 12, 14, and 16 (next to be supported) on CI. This will catch
node version-specific problems like that solved in dad9bdc.
* mention 12 and 14 in build instructions and link to instructions for
installing that version.
* follow this in Dockerfile, installing version 14. This addresses
a "Cannot find module 'worker_threads'" error introduced in
39a63e0, which (inadvisedly) upgraded gzipper 4->5 in addition to
the material-ui upgrade.
* use utf-8 encoding rather than ascii in live part parser. Those
builds apparently don't support ascii. iThey must use "small-icu" or
have ICU disabled, as described here:
https://nodejs.org/api/util.html#util_encodings_supported_when_node_js_is_built_with_the_small_icu_option
Reading from the mmap()ed region in the tokio threads could cause
them to stall:
* That could affect UI serving when there were concurrent
UI requests (i.e., not just requests that needed the reads in
question anyway).
* If there's a faulty disk, it could cause the UI to totally hang.
Better to not mix disks between threads.
* Soon, I want to handle RTSP from the tokio threads (#37). Similarly,
we don't want RTSP streaming to block on operations from unrelated
disks.
I went with just one thread per disk which I think is sufficient.
But it'd be possible to do a fixed-size pool instead which might improve
latency when some pages are already cached.
I also dropped the memmap dependency. I had to compute the page
alignment anyway to get mremap to work, and Moonfire NVR already is
Unix-specific, so there wasn't much value from the memmap or memmap2
crates.
Fixes#88
* Use the standard UUID syntax for /etc/fstab
* Added instruction to create sample directory
* Update install.md
* Change sample ownership instead of perms
In particular, this was happening out of the box on Raspberry Pi OS Lite
20210304, as reported by ironoxidizer@gmail.com here:
https://groups.google.com/g/moonfire-nvr-users/c/2j9LvfFl2u8/m/tJcNS2WfCQAJ
* adjust main.rs to make the problem more obvious
* mention it in the troubleshooting guide
* sidestep it in the nvr docker wrapper script
also just use --networking=host rather than --publish (avoiding a proxy
process). I'm using Docker to simplify the build and deployment process,
not as a security boundary, so just do the simpler thing.
As noted in mylog's 2b1085c:
Looks like both the GNU tools' --color argument and cargo's
CARGO_TERM_COLOR expect always/never rather than on/off. Match that.
Might as well understand off/no/false and on/yes/true also.
* add more description to the troubleshooting guide
* adjust the log format to match more recent glog
* include a config for the lnav tool, which will help colorize,
browse, and search the logs.
Next up: install an ffmpeg log callback for consistency.
This eases build setup. Where Yarn requires a separate package
repository, npm is available in the standard one.
yarn's package repository signature was recently expired, and apparently
will expire again in a year. Avoid dealing with that.
Fixes#110.
Inspired by the poor error message here:
https://github.com/scottlamb/moonfire-nvr/issues/107#issuecomment-777587727
* print the friendlier Display version of the error rather than Debug.
Eg, "EROFS: Read-only filesystem" rather than "Sys(EROFS)". Do this
everywhere: on command exit, on syncer retries, and on stream
retries.
* print the most immediate problem and additional lines for each
cause.
* print the backtrace or an advertisement for RUST_BACKTRACE=1 if it's
unavailable.
* also mention RUST_BACKTRACE=1 in the troubleshooting guide.
* add context in various places, including pathnames. There are surely
many places more it'd be helpful, but this is a start.
* allow subcommands to return failure without an Error.
In particular, "moonfire-nvr check" does its own error printing
because it wants to print all the errors it finds. Printing "see
earlier errors" with a meaningless stack trace seems like it'd just
confuse. But I also want to get rid of the misleading "Success" at
the end and 0 return to the OS.
* give a rule of thumb for update time in the documentation
* log the SQLite3 version, which can affect performance
* do the vacuum in non-WAL mode, to correctly set the page size and to
avoid very slow behavior on older SQLite3 versions. Larger page sizes
are generally faster (including subsequent vacuum operations).
This won't help much for the first vacuum after this change, but it
will help afterward.
* likewise, set the page size properly on "moonfire-nvr init".
Besides being more clear about what belongs to which, this helps with
docker caching. The server and ui parts are only rebuilt when their
respective subdirectories change.
Extend this a bit further by making the webpack build not depend on
the target architecture. And adding cache dirs so parts of the server
and ui build process can be reused when layer-wide caching fails.
This brings most things reasonably up-to-date. libpasta's deps are
dragging a bit, keeping us on an older ring to avoid duplication,
and causing us to use three versions of base64. And I need to update
a few of my companion crates' parking_lot dep to match tokio.
This splits the schema and playback path. The recording path still
adjusts the frame durations and always says the wall and media durations
are the same. I expect to change that in a following commit. I wouldn't
be surprised if that shakes out some bugs in this portion.
This is useful for a combo scrub bar-based UI (#32) + live view UI (#59)
in a non-obvious way. When constructing a HTML Media Source Extensions
API SourceBuffer, the caller can specify a "mode" of either "segments"
or "sequence":
In "sequence" mode, playback assumes segments are added sequentially.
This is good enough for a live view-only UI (#59) but not for a scrub
bar UI in which you may want to seek backward to a segment you've never
seen before. You will then need to insert a segment out-of-sequence.
Imagine what happens when the user goes forward again until the end of
the segment inserted immediately before it. The user should see the
chronologically next segment or a pause for loading if it's unavailable.
The best approximation of this is to track the mapping of timestamps to
segments and insert a VTTCue with an enter/exit handler that seeks to
the right position. But seeking isn't instantaneous; the user will
likely briefly see first the segment they seeked to before. That's
janky. Additionally, the "canplaythrough" event will behave strangely.
In "segments" mode, playback respects the timestamps we set:
* The obvious choice is to use wall clock timestamps. This is fine if
they're known to be fixed and correct. They're not. The
currently-recording segment may be "unanchored", meaning its start
timestamp is not yet fixed. Older timestamps may overlap if the system
clock was stepped between runs. The latter isn't /too/ bad from a user
perspective, though it's confusing as a developer. We probably will
only end up showing the more recent recording for a given
timestamp anyway. But the former is quite annoying. It means we have
to throw away part of the SourceBuffer that we may want to seek back
(causing UI pauses when that happens) or keep our own spare copy of it
(memory bloat). I'd like to avoid the whole mess.
* Another approach is to use timestamps that are guaranteed to be in
the correct order but that may have gaps. In particular, a timestamp
of (recording_id * max_recording_duration) + time_within_recording.
But again seeking isn't instantaneous. In my experiments, there's a
visible pause between segments that drives me nuts.
* Finally, the approach that led me to this schema change. Use
timestamps that place each segment after the one before, possibly with
an intentional gap between runs (to force a wait where we have an
actual gap). This should make the browser's natural playback behavior
work properly: it never goes to an incorrect place, and it only waits
when/if we want it to. We have to maintain a mapping between its
timestamps and segment ids but that's doable.
This commit is only the schema change; the new data aren't exposed in
the API yet, much less used by a UI.
Note that stream.next_recording_id became stream.cum_recordings. I made
a slight definition change in the process: recording ids for new streams
start at 0 rather than 1. Various tests changed accordingly.
The upgrade process makes a best effort to backfill these new fields,
but of course it doesn't know the total duration or number of runs of
previously deleted rows. That's good enough.
Benefits:
* Blake3 is faster. This is most noticeable for the hashing of the
sample file data.
* we no longer need OpenSSL, which helps with shrinking the binary size
(#70). sha1 basically forced OpenSSL usage; ring deliberately doesn't
support this old algorithm, and the pure-Rust sha1 crate is painfully
slow. OpenSSL might still be a better choice than ring/rustls for TLS
but it's nice to have the option.
For the video sample entries, I decided we don't need to hash at all. I
think the id number is sufficiently stable, and it's okay---perhaps even
desirable---if an existing init segment changes for fixes like e5b83c2.
* simplify it. Go from six checked-in config files + one local one to
three checked-in configs + commandline options. I find it less
confusing to have the options plumbed through fewer layers.
* support developing against a https production server, as described in
guide/developing-ui.md.
* fix the source map. The sourceMap parameter in prod.config.js as far
as I can tell evaluated to false when run with production config, and
anyway UglifyJS seems to be incompatible with the specified
cheap-module-source-map. Use source-map instead.
The multipart stream / hanging GET approach worked in a prototype for a
single stream, but Chrome has a per-host limit of six connections. If I
try streaming all my cameras at once, I hit that limit. I can't open all
the streams, much less additional connections to load init segments and
such. Websockets apparently has a much higher limit of 256.
This doesn't take much advantage of async fns so far. For example, the
with_{form,json}_body functions are still designed to be used with
future combinators when it'd be more natural to call them from async
fns now. But it's a start.
Similarly, this still uses the old version of reqwest. Small steps.
Requires Rust 1.40 now. (1.39 is a requirement of async, and 1.40 is a
requirement of http-serve 0.2.0.)
* in markdown files, use code fences rather than indented blocks.
This is harder to screw up (one of them was off by a space so didn't
render properly) and allows me to add info strings.
* uniformly use "useradd" to create the user and group in all three
places (install-manual.md, script-functions.sh, Dockerfile) rather
than addgroup + adduser. Create a full home dir, which I suspect was
the problem in #67. Don't allow customizing group name; it's always
the same as the user.
* install the sqlite3 package so that the "moonfire-nvr sql" command
works properly.
* remove "setup_db" function, which was out of place. Since the
creation of the "moonfire-nvr init" command, this has to happen
after installation of the binary. install.md gives instructions on
this part anyway so remove it from the script.
* give a proper command to create the db dir. It was creating it
within the current directory, not within /var/lib/moonfire-nvr.
Don't bother creating sample directory; "moonfire-nvr config"
will do this.
* when setting owners on a newly created directory, use a single
"install -d" command rather than "mkdir" + "chown".
* address confusion about whether sample file dirs need to be
precreated. (Only when Moonfire NVR doesn't have write permissions
on the parent.)
* always just install the packaged version of ffmpeg rather than
building our own. This has been usable since Debian/Raspbian 9
Stretch; Debian/Raspbian 10 Buster is out now so there's no excuse
for still running Debian/Raspbian 8 Jessie.
* don't chown the UI directory; it can be owned by root as with
the binary.
* in scripts/install.sh, don't enable/start the service yet. It hasn't
been configured.
Add a new schema version 5; now 4 means the directory meta may or may
not be upgraded.
Fixes#65: now it's possible to open the directory even if it lies on a
completely full disk.
(I also considered the names "capabilities" and "scopes", but I think
"permissions" is the most widely understood.)
This is increasingly necessary as the web API becomes more capable.
Among other things, it allows:
* non-administrator users who can view but not access camera passwords
or change any state
* workers that update signal state based on cameras' built-in motion
detection or a security system's events but don't need to view videos
* control over what can be done without authenticating
Currently session permissions are just copied from user permissions, but
you can also imagine admin sessions vs not, as a checkbox when signing
in. This would match the standard Unix workflow of using a
non-administrative session most of the time.
Relevant to my current signals work (#28) and to the addition of an
administrative API (#35, including #66).
travis-ci pointed out that the dependency bump broke 1.31:
Compiling docopt v1.1.0
error[E0658]: imports can only refer to extern crate names passed with `--extern` on stable channel (see issue #53130)
--> /home/travis/.cargo/registry/src/github.com-1ecc6299db9ec823/docopt-1.1.0/src/parse.rs:48:5
|
48 | use regex;
| ^^^^^
|
Looks like uniform_paths was stabilized in 1.32, and I verified locally that
version builds.
The 091217b workaround of telling ffmpeg to only request the video
stream works perfectly fine for now. I'll revisit when adding audio
support (#34).
Fixes#36
Scott Lamb
John Poole
Iron Oxidizer
Jack Challen