moonfire-nvr/server/db/testutil.rs

207 lines
8.5 KiB
Rust
Raw Normal View History

// This file is part of Moonfire NVR, a security camera network video recorder.
// Copyright (C) 2016-2020 The Moonfire NVR Authors
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// In addition, as a special exception, the copyright holders give
// permission to link the code of portions of this program with the
// OpenSSL library under certain conditions as described in each
// individual source file, and distribute linked combinations including
// the two.
//
// You must obey the GNU General Public License in all respects for all
// of the code used other than OpenSSL. If you modify file(s) with this
// exception, you may extend this exception to your version of the
// file(s), but you are not obligated to do so. If you do not wish to do
// so, delete this exception statement from your version. If you delete
// this exception statement from all source files in the program, then
// also delete it here.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
use base::clock::Clocks;
use crate::db;
use crate::dir;
use fnv::FnvHashMap;
use mylog;
use rusqlite;
use std::env;
use std::sync::Arc;
use std::thread;
use tempdir::TempDir;
use time;
use uuid::Uuid;
use crate::writer;
static INIT: parking_lot::Once = parking_lot::Once::new();
/// id of the camera created by `TestDb::new` below.
pub const TEST_CAMERA_ID: i32 = 1;
pub const TEST_STREAM_ID: i32 = 1;
pub const TEST_VIDEO_SAMPLE_ENTRY_DATA: &[u8] =
b"\x00\x00\x00\x7D\x61\x76\x63\x31\x00\x00\x00\x00\x00\x00\x00\x01\x00\x00\x00\x00\x00\x00\x00\
\x00\x00\x00\x00\x00\x00\x00\x00\x00\x07\x80\x04\x38\x00\x48\x00\x00\x00\x48\x00\x00\x00\x00\
\x00\x00\x00\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\
\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x18\xFF\xFF\x00\x00\x00\x27\x61\x76\
\x63\x43\x01\x4D\x00\x2A\xFF\xE1\x00\x10\x67\x4D\x00\x2A\x95\xA8\x1E\x00\x89\xF9\x66\xE0\x20\
\x20\x20\x40\x01\x00\x04\x68\xEE\x3C\x80";
/// Performs global initialization for tests.
/// * set up logging. (Note the output can be confusing unless `RUST_TEST_THREADS=1` is set in
/// the program's environment prior to running.)
/// * set `TZ=America/Los_Angeles` so that tests that care about calendar time get the expected
/// results regardless of machine setup.)
/// * use a fast but insecure password hashing format.
pub fn init() {
INIT.call_once(|| {
let h = mylog::Builder::new()
.set_spec(&::std::env::var("MOONFIRE_LOG").unwrap_or("info".to_owned()))
.build();
h.install().unwrap();
env::set_var("TZ", "America/Los_Angeles");
time::tzset();
crate::auth::set_test_config();
Rust rewrite I should have submitted/pushed more incrementally but just played with it on my computer as I was learning the language. The new Rust version more or less matches the functionality of the current C++ version, although there are many caveats listed below. Upgrade notes: when moving from the C++ version, I recommend dropping and recreating the "recording_cover" index in SQLite3 to pick up the addition of the "video_sync_samples" column: $ sudo systemctl stop moonfire-nvr $ sudo -u moonfire-nvr sqlite3 /var/lib/moonfire-nvr/db/db sqlite> drop index recording_cover; sqlite3> create index ...rest of command as in schema.sql...; sqlite3> ^D Some known visible differences from the C++ version: * .mp4 generation queries SQLite3 differently. Before it would just get all video indexes in a single query. Now it leads with a query that should be satisfiable by the covering index (assuming the index has been recreated as noted above), then queries individual recording's indexes as needed to fill a LRU cache. I believe this is roughly similar speed for the initial hit (which generates the moov part of the file) and significantly faster when seeking. I would have done it a while ago with the C++ version but didn't want to track down a lru cache library. It was easier to find with Rust. * On startup, the Rust version cleans up old reserved files. This is as in the design; the C++ version was just missing this code. * The .html recording list output is a little different. It's in ascending order, with the most current segment shorten than an hour rather than the oldest. This is less ergonomic, but it was easy. I could fix it or just wait to obsolete it with some fancier JavaScript UI. * commandline argument parsing and logging have changed formats due to different underlying libraries. * The JSON output isn't quite right (matching the spec / C++ implementation) yet. Additional caveats: * I haven't done any proof-reading of prep.sh + install instructions. * There's a lot of code quality work to do: adding (back) comments and test coverage, developing a good Rust style. * The ffmpeg foreign function interface is particularly sketchy. I'd eventually like to switch to something based on autogenerated bindings. I'd also like to use pure Rust code where practical, but once I do on-NVR motion detection I'll need to existing C/C++ libraries for speed (H.264 decoding + OpenCL-based analysis).
2016-11-25 17:34:00 -05:00
});
}
pub struct TestDb<C: Clocks + Clone> {
pub db: Arc<db::Database<C>>,
pub dirs_by_stream_id: Arc<FnvHashMap<i32, Arc<dir::SampleFileDir>>>,
pub syncer_channel: writer::SyncerChannel<::std::fs::File>,
pub syncer_join: thread::JoinHandle<()>,
pub tmpdir: TempDir,
pub test_camera_uuid: Uuid,
}
impl<C: Clocks + Clone> TestDb<C> {
/// Creates a test database with one camera.
pub fn new(clocks: C) -> Self {
Self::new_with_flush_if_sec(clocks, 0)
}
pub(crate) fn new_with_flush_if_sec(clocks: C, flush_if_sec: i64) -> Self {
let tmpdir = TempDir::new("moonfire-nvr-test").unwrap();
let mut conn = rusqlite::Connection::open_in_memory().unwrap();
db::init(&mut conn).unwrap();
2018-03-09 20:41:53 -05:00
let db = Arc::new(db::Database::new(clocks, conn, true).unwrap());
let (test_camera_uuid, sample_file_dir_id);
let path = tmpdir.path().to_str().unwrap().to_owned();
let dir;
{
let mut l = db.lock();
sample_file_dir_id = l.add_sample_file_dir(path.to_owned()).unwrap();
assert_eq!(TEST_CAMERA_ID, l.add_camera(db::CameraChange {
short_name: "test camera".to_owned(),
description: "".to_owned(),
onvif_host: "test-camera".to_owned(),
username: "foo".to_owned(),
password: "bar".to_owned(),
streams: [
db::StreamChange {
sample_file_dir_id: Some(sample_file_dir_id),
rtsp_url: "rtsp://test-camera/main".to_owned(),
record: true,
flush_if_sec,
},
Default::default(),
],
}).unwrap());
test_camera_uuid = l.cameras_by_id().get(&TEST_CAMERA_ID).unwrap().uuid;
l.update_retention(&[db::RetentionChange {
stream_id: TEST_STREAM_ID,
new_record: true,
new_limit: 1048576,
}]).unwrap();
dir = l.sample_file_dirs_by_id().get(&sample_file_dir_id).unwrap().get().unwrap();
}
let mut dirs_by_stream_id = FnvHashMap::default();
dirs_by_stream_id.insert(TEST_STREAM_ID, dir.clone());
let (syncer_channel, syncer_join) =
writer::start_syncer(db.clone(), sample_file_dir_id).unwrap();
TestDb {
db,
dirs_by_stream_id: Arc::new(dirs_by_stream_id),
syncer_channel,
syncer_join,
tmpdir,
test_camera_uuid,
}
}
/// Creates a recording with a fresh `RecordingToInsert` row which has been touched only by
/// a `SampleIndexEncoder`. Fills in a video sample entry id and such to make it valid.
/// There will no backing sample file, so it won't be possible to generate a full `.mp4`.
pub fn insert_recording_from_encoder(&self, r: db::RecordingToInsert)
-> db::ListRecordingsRow {
use crate::recording::{self, TIME_UNITS_PER_SEC};
let mut db = self.db.lock();
let video_sample_entry_id = db.insert_video_sample_entry(db::VideoSampleEntryToInsert {
width: 1920,
height: 1080,
pasp_h_spacing: 1,
pasp_v_spacing: 1,
data: [0u8; 100].to_vec(),
rfc6381_codec: "avc1.000000".to_owned(),
}).unwrap();
let (id, _) = db.add_recording(TEST_STREAM_ID, db::RecordingToInsert {
start: recording::Time(1430006400i64 * TIME_UNITS_PER_SEC),
video_sample_entry_id,
wall_duration_90k: r.media_duration_90k,
..r
}).unwrap();
db.mark_synced(id).unwrap();
db.flush("create_recording_from_encoder").unwrap();
let mut row = None;
db.list_recordings_by_id(TEST_STREAM_ID, id.recording() .. id.recording()+1,
&mut |r| { row = Some(r); Ok(()) }).unwrap();
row.unwrap()
}
}
// For benchmarking
#[cfg(feature="nightly")]
pub fn add_dummy_recordings_to_db(db: &db::Database, num: usize) {
use crate::recording::{self, TIME_UNITS_PER_SEC};
let mut data = Vec::new();
data.extend_from_slice(include_bytes!("testdata/video_sample_index.bin"));
let mut db = db.lock();
let video_sample_entry_id = db.insert_video_sample_entry(db::VideoSampleEntryToInsert {
width: 1920,
height: 1080,
pasp_h_spacing: 1,
pasp_v_spacing: 1,
data: [0u8; 100].to_vec(),
rfc6381_codec: "avc1.000000".to_owned(),
}).unwrap();
let mut recording = db::RecordingToInsert {
sample_file_bytes: 30104460,
start: recording::Time(1430006400i64 * TIME_UNITS_PER_SEC),
media_duration_90k: 5399985,
wall_duration_90k: 5399985,
video_samples: 1800,
video_sync_samples: 60,
video_sample_entry_id: video_sample_entry_id,
video_index: data,
run_offset: 0,
..Default::default()
};
for _ in 0..num {
let (id, _) = db.add_recording(TEST_STREAM_ID, recording.clone()).unwrap();
recording.start += recording::Duration(recording.wall_duration_90k as i64);
recording.run_offset += 1;
db.mark_synced(id).unwrap();
}
db.flush("add_dummy_recordings_to_db").unwrap();
}