minio/vendor/github.com/klauspost/reedsolomon/reedsolomon.go

/**
 * Reed-Solomon Coding over 8-bit values.
 *
 * Copyright 2015, Klaus Post
 * Copyright 2015, Backblaze, Inc.
 */

// Package reedsolomon enables Erasure Coding in Go
//
// For usage and examples, see https://github.com/klauspost/reedsolomon
//
package reedsolomon

import (
	"bytes"
	"errors"
	"io"
	"sync"
)

// Encoder is an interface to encode Reed-Salomon parity sets for your data.
type Encoder interface {
	// Encodes parity for a set of data shards.
	// Input is 'shards' containing data shards followed by parity shards.
	// The number of shards must match the number given to New().
	// Each shard is a byte array, and they must all be the same size.
	// The parity shards will always be overwritten and the data shards
	// will remain the same, so it is safe for you to read from the
	// data shards while this is running.
	Encode(shards [][]byte) error

	// Verify returns true if the parity shards contain correct data.
	// The data is the same format as Encode. No data is modified, so
	// you are allowed to read from data while this is running.
	Verify(shards [][]byte) (bool, error)

	// Reconstruct will recreate the missing shards if possible.
	//
	// Given a list of shards, some of which contain data, fills in the
	// ones that don't have data.
	//
	// The length of the array must be equal to the total number of shards.
	// You indicate that a shard is missing by setting it to nil or zero-length.
	// If a shard is zero-length but has sufficient capacity, that memory will
	// be used, otherwise a new []byte will be allocated.
	//
	// If there are too few shards to reconstruct the missing
	// ones, ErrTooFewShards will be returned.
	//
	// The reconstructed shard set is complete, but integrity is not verified.
	// Use the Verify function to check if data set is ok.
	Reconstruct(shards [][]byte) error

	// ReconstructData will recreate any missing data shards, if possible.
	//
	// Given a list of shards, some of which contain data, fills in the
	// data shards that don't have data.
	//
	// The length of the array must be equal to Shards.
	// You indicate that a shard is missing by setting it to nil or zero-length.
	// If a shard is zero-length but has sufficient capacity, that memory will
	// be used, otherwise a new []byte will be allocated.
	//
	// If there are too few shards to reconstruct the missing
	// ones, ErrTooFewShards will be returned.
	//
	// As the reconstructed shard set may contain missing parity shards,
	// calling the Verify function is likely to fail.
	ReconstructData(shards [][]byte) error

	// Update parity is use for change a few data shards and update it's parity.
	// Input 'newDatashards' containing data shards changed.
	// Input 'shards' containing old data shards (if data shard not changed, it can be nil) and old parity shards.
	// new parity shards will in shards[DataShards:]
	// Update is very useful if  DataShards much larger than ParityShards and changed data shards is few. It will
	// faster than Encode and not need read all data shards to encode.
	Update(shards [][]byte, newDatashards [][]byte) error

	// Split a data slice into the number of shards given to the encoder,
	// and create empty parity shards.
	//
	// The data will be split into equally sized shards.
	// If the data size isn't dividable by the number of shards,
	// the last shard will contain extra zeros.
	//
	// There must be at least 1 byte otherwise ErrShortData will be
	// returned.
	//
	// The data will not be copied, except for the last shard, so you
	// should not modify the data of the input slice afterwards.
	Split(data []byte) ([][]byte, error)

	// Join the shards and write the data segment to dst.
	//
	// Only the data shards are considered.
	// You must supply the exact output size you want.
	// If there are to few shards given, ErrTooFewShards will be returned.
	// If the total data size is less than outSize, ErrShortData will be returned.
	Join(dst io.Writer, shards [][]byte, outSize int) error
}

// reedSolomon contains a matrix for a specific
// distribution of datashards and parity shards.
// Construct if using New()
type reedSolomon struct {
	DataShards   int // Number of data shards, should not be modified.
	ParityShards int // Number of parity shards, should not be modified.
	Shards       int // Total number of shards. Calculated, and should not be modified.
	m            matrix
	tree         inversionTree
	parity       [][]byte
	o            options
}

// ErrInvShardNum will be returned by New, if you attempt to create
// an Encoder where either data or parity shards is zero or less.
var ErrInvShardNum = errors.New("cannot create Encoder with zero or less data/parity shards")

// ErrMaxShardNum will be returned by New, if you attempt to create an
// Encoder where data and parity shards are bigger than the order of
// GF(2^8).
var ErrMaxShardNum = errors.New("cannot create Encoder with more than 256 data+parity shards")

// buildMatrix creates the matrix to use for encoding, given the
// number of data shards and the number of total shards.
//
// The top square of the matrix is guaranteed to be an identity
// matrix, which means that the data shards are unchanged after
// encoding.
func buildMatrix(dataShards, totalShards int) (matrix, error) {
	// Start with a Vandermonde matrix.  This matrix would work,
	// in theory, but doesn't have the property that the data
	// shards are unchanged after encoding.
	vm, err := vandermonde(totalShards, dataShards)
	if err != nil {
		return nil, err
	}

	// Multiply by the inverse of the top square of the matrix.
	// This will make the top square be the identity matrix, but
	// preserve the property that any square subset of rows is
	// invertible.
	top, err := vm.SubMatrix(0, 0, dataShards, dataShards)
	if err != nil {
		return nil, err
	}

	topInv, err := top.Invert()
	if err != nil {
		return nil, err
	}

	return vm.Multiply(topInv)
}

// buildMatrixPAR1 creates the matrix to use for encoding according to
// the PARv1 spec, given the number of data shards and the number of
// total shards. Note that the method they use is buggy, and may lead
// to cases where recovery is impossible, even if there are enough
// parity shards.
//
// The top square of the matrix is guaranteed to be an identity
// matrix, which means that the data shards are unchanged after
// encoding.
func buildMatrixPAR1(dataShards, totalShards int) (matrix, error) {
	result, err := newMatrix(totalShards, dataShards)
	if err != nil {
		return nil, err
	}

	for r, row := range result {
		// The top portion of the matrix is the identity
		// matrix, and the bottom is a transposed Vandermonde
		// matrix starting at 1 instead of 0.
		if r < dataShards {
			result[r][r] = 1
		} else {
			for c := range row {
				result[r][c] = galExp(byte(c+1), r-dataShards)
			}
		}
	}
	return result, nil
}

func buildMatrixCauchy(dataShards, totalShards int) (matrix, error) {
	result, err := newMatrix(totalShards, dataShards)
	if err != nil {
		return nil, err
	}

	for r, row := range result {
		// The top portion of the matrix is the identity
		// matrix, and the bottom is a transposed Cauchy matrix.
		if r < dataShards {
			result[r][r] = 1
		} else {
			for c := range row {
				result[r][c] = invTable[(byte(r ^ c))]
			}
		}
	}
	return result, nil
}

// New creates a new encoder and initializes it to
// the number of data shards and parity shards that
// you want to use. You can reuse this encoder.
// Note that the maximum number of total shards is 256.
// If no options are supplied, default options are used.
func New(dataShards, parityShards int, opts ...Option) (Encoder, error) {
	r := reedSolomon{
		DataShards:   dataShards,
		ParityShards: parityShards,
		Shards:       dataShards + parityShards,
		o:            defaultOptions,
	}

	for _, opt := range opts {
		opt(&r.o)
	}
	if dataShards <= 0 || parityShards <= 0 {
		return nil, ErrInvShardNum
	}

	if dataShards+parityShards > 256 {
		return nil, ErrMaxShardNum
	}

	var err error
	switch {
	case r.o.useCauchy:
		r.m, err = buildMatrixCauchy(dataShards, r.Shards)
	case r.o.usePAR1Matrix:
		r.m, err = buildMatrixPAR1(dataShards, r.Shards)
	default:
		r.m, err = buildMatrix(dataShards, r.Shards)
	}
	if err != nil {
		return nil, err
	}

	// Inverted matrices are cached in a tree keyed by the indices
	// of the invalid rows of the data to reconstruct.
	// The inversion root node will have the identity matrix as
	// its inversion matrix because it implies there are no errors
	// with the original data.
	r.tree = newInversionTree(dataShards, parityShards)

	r.parity = make([][]byte, parityShards)
	for i := range r.parity {
		r.parity[i] = r.m[dataShards+i]
	}

	return &r, err
}

// ErrTooFewShards is returned if too few shards where given to
// Encode/Verify/Reconstruct/Update. It will also be returned from Reconstruct
// if there were too few shards to reconstruct the missing data.
var ErrTooFewShards = errors.New("too few shards given")

// Encodes parity for a set of data shards.
// An array 'shards' containing data shards followed by parity shards.
// The number of shards must match the number given to New.
// Each shard is a byte array, and they must all be the same size.
// The parity shards will always be overwritten and the data shards
// will remain the same.
func (r reedSolomon) Encode(shards [][]byte) error {
	if len(shards) != r.Shards {
		return ErrTooFewShards
	}

	err := checkShards(shards, false)
	if err != nil {
		return err
	}

	// Get the slice of output buffers.
	output := shards[r.DataShards:]

	// Do the coding.
	r.codeSomeShards(r.parity, shards[0:r.DataShards], output, r.ParityShards, len(shards[0]))
	return nil
}

// ErrInvalidInput is returned if invalid input parameter of Update.
var ErrInvalidInput = errors.New("invalid input")

func (r reedSolomon) Update(shards [][]byte, newDatashards [][]byte) error {
	if len(shards) != r.Shards {
		return ErrTooFewShards
	}

	if len(newDatashards) != r.DataShards {
		return ErrTooFewShards
	}

	err := checkShards(shards, true)
	if err != nil {
		return err
	}

	err = checkShards(newDatashards, true)
	if err != nil {
		return err
	}

	for i := range newDatashards {
		if newDatashards[i] != nil && shards[i] == nil {
			return ErrInvalidInput
		}
	}
	for _, p := range shards[r.DataShards:] {
		if p == nil {
			return ErrInvalidInput
		}
	}

	shardSize := shardSize(shards)

	// Get the slice of output buffers.
	output := shards[r.DataShards:]

	// Do the coding.
	r.updateParityShards(r.parity, shards[0:r.DataShards], newDatashards[0:r.DataShards], output, r.ParityShards, shardSize)
	return nil
}

func (r reedSolomon) updateParityShards(matrixRows, oldinputs, newinputs, outputs [][]byte, outputCount, byteCount int) {
	if r.o.maxGoroutines > 1 && byteCount > r.o.minSplitSize {
		r.updateParityShardsP(matrixRows, oldinputs, newinputs, outputs, outputCount, byteCount)
		return
	}

	for c := 0; c < r.DataShards; c++ {
		in := newinputs[c]
		if in == nil {
			continue
		}
		oldin := oldinputs[c]
		// oldinputs data will be change
		sliceXor(in, oldin, r.o.useSSE2)
		for iRow := 0; iRow < outputCount; iRow++ {
			galMulSliceXor(matrixRows[iRow][c], oldin, outputs[iRow], r.o.useSSSE3, r.o.useAVX2)
		}
	}
}

func (r reedSolomon) updateParityShardsP(matrixRows, oldinputs, newinputs, outputs [][]byte, outputCount, byteCount int) {
	var wg sync.WaitGroup
	do := byteCount / r.o.maxGoroutines
	if do < r.o.minSplitSize {
		do = r.o.minSplitSize
	}
	start := 0
	for start < byteCount {
		if start+do > byteCount {
			do = byteCount - start
		}
		wg.Add(1)
		go func(start, stop int) {
			for c := 0; c < r.DataShards; c++ {
				in := newinputs[c]
				if in == nil {
					continue
				}
				oldin := oldinputs[c]
				// oldinputs data will be change
				sliceXor(in[start:stop], oldin[start:stop], r.o.useSSE2)
				for iRow := 0; iRow < outputCount; iRow++ {
					galMulSliceXor(matrixRows[iRow][c], oldin[start:stop], outputs[iRow][start:stop], r.o.useSSSE3, r.o.useAVX2)
				}
			}
			wg.Done()
		}(start, start+do)
		start += do
	}
	wg.Wait()
}

// Verify returns true if the parity shards contain the right data.
// The data is the same format as Encode. No data is modified.
func (r reedSolomon) Verify(shards [][]byte) (bool, error) {
	if len(shards) != r.Shards {
		return false, ErrTooFewShards
	}
	err := checkShards(shards, false)
	if err != nil {
		return false, err
	}

	// Slice of buffers being checked.
	toCheck := shards[r.DataShards:]

	// Do the checking.
	return r.checkSomeShards(r.parity, shards[0:r.DataShards], toCheck, r.ParityShards, len(shards[0])), nil
}

// Multiplies a subset of rows from a coding matrix by a full set of
// input shards to produce some output shards.
// 'matrixRows' is The rows from the matrix to use.
// 'inputs' An array of byte arrays, each of which is one input shard.
// The number of inputs used is determined by the length of each matrix row.
// outputs Byte arrays where the computed shards are stored.
// The number of outputs computed, and the
// number of matrix rows used, is determined by
// outputCount, which is the number of outputs to compute.
func (r reedSolomon) codeSomeShards(matrixRows, inputs, outputs [][]byte, outputCount, byteCount int) {
	if r.o.maxGoroutines > 1 && byteCount > r.o.minSplitSize {
		r.codeSomeShardsP(matrixRows, inputs, outputs, outputCount, byteCount)
		return
	}
	for c := 0; c < r.DataShards; c++ {
		in := inputs[c]
		for iRow := 0; iRow < outputCount; iRow++ {
			if c == 0 {
				galMulSlice(matrixRows[iRow][c], in, outputs[iRow], r.o.useSSSE3, r.o.useAVX2)
			} else {
				galMulSliceXor(matrixRows[iRow][c], in, outputs[iRow], r.o.useSSSE3, r.o.useAVX2)
			}
		}
	}
}

// Perform the same as codeSomeShards, but split the workload into
// several goroutines.
func (r reedSolomon) codeSomeShardsP(matrixRows, inputs, outputs [][]byte, outputCount, byteCount int) {
	var wg sync.WaitGroup
	do := byteCount / r.o.maxGoroutines
	if do < r.o.minSplitSize {
		do = r.o.minSplitSize
	}
	start := 0
	for start < byteCount {
		if start+do > byteCount {
			do = byteCount - start
		}
		wg.Add(1)
		go func(start, stop int) {
			for c := 0; c < r.DataShards; c++ {
				in := inputs[c]
				for iRow := 0; iRow < outputCount; iRow++ {
					if c == 0 {
						galMulSlice(matrixRows[iRow][c], in[start:stop], outputs[iRow][start:stop], r.o.useSSSE3, r.o.useAVX2)
					} else {
						galMulSliceXor(matrixRows[iRow][c], in[start:stop], outputs[iRow][start:stop], r.o.useSSSE3, r.o.useAVX2)
					}
				}
			}
			wg.Done()
		}(start, start+do)
		start += do
	}
	wg.Wait()
}

// checkSomeShards is mostly the same as codeSomeShards,
// except this will check values and return
// as soon as a difference is found.
func (r reedSolomon) checkSomeShards(matrixRows, inputs, toCheck [][]byte, outputCount, byteCount int) bool {
	if r.o.maxGoroutines > 1 && byteCount > r.o.minSplitSize {
		return r.checkSomeShardsP(matrixRows, inputs, toCheck, outputCount, byteCount)
	}
	outputs := make([][]byte, len(toCheck))
	for i := range outputs {
		outputs[i] = make([]byte, byteCount)
	}
	for c := 0; c < r.DataShards; c++ {
		in := inputs[c]
		for iRow := 0; iRow < outputCount; iRow++ {
			galMulSliceXor(matrixRows[iRow][c], in, outputs[iRow], r.o.useSSSE3, r.o.useAVX2)
		}
	}

	for i, calc := range outputs {
		if !bytes.Equal(calc, toCheck[i]) {
			return false
		}
	}
	return true
}

func (r reedSolomon) checkSomeShardsP(matrixRows, inputs, toCheck [][]byte, outputCount, byteCount int) bool {
	same := true
	var mu sync.RWMutex // For above

	var wg sync.WaitGroup
	do := byteCount / r.o.maxGoroutines
	if do < r.o.minSplitSize {
		do = r.o.minSplitSize
	}
	start := 0
	for start < byteCount {
		if start+do > byteCount {
			do = byteCount - start
		}
		wg.Add(1)
		go func(start, do int) {
			defer wg.Done()
			outputs := make([][]byte, len(toCheck))
			for i := range outputs {
				outputs[i] = make([]byte, do)
			}
			for c := 0; c < r.DataShards; c++ {
				mu.RLock()
				if !same {
					mu.RUnlock()
					return
				}
				mu.RUnlock()
				in := inputs[c][start : start+do]
				for iRow := 0; iRow < outputCount; iRow++ {
					galMulSliceXor(matrixRows[iRow][c], in, outputs[iRow], r.o.useSSSE3, r.o.useAVX2)
				}
			}

			for i, calc := range outputs {
				if !bytes.Equal(calc, toCheck[i][start:start+do]) {
					mu.Lock()
					same = false
					mu.Unlock()
					return
				}
			}
		}(start, do)
		start += do
	}
	wg.Wait()
	return same
}

// ErrShardNoData will be returned if there are no shards,
// or if the length of all shards is zero.
var ErrShardNoData = errors.New("no shard data")

// ErrShardSize is returned if shard length isn't the same for all
// shards.
var ErrShardSize = errors.New("shard sizes do not match")

// checkShards will check if shards are the same size
// or 0, if allowed. An error is returned if this fails.
// An error is also returned if all shards are size 0.
func checkShards(shards [][]byte, nilok bool) error {
	size := shardSize(shards)
	if size == 0 {
		return ErrShardNoData
	}
	for _, shard := range shards {
		if len(shard) != size {
			if len(shard) != 0 || !nilok {
				return ErrShardSize
			}
		}
	}
	return nil
}

// shardSize return the size of a single shard.
// The first non-zero size is returned,
// or 0 if all shards are size 0.
func shardSize(shards [][]byte) int {
	for _, shard := range shards {
		if len(shard) != 0 {
			return len(shard)
		}
	}
	return 0
}

// Reconstruct will recreate the missing shards, if possible.
//
// Given a list of shards, some of which contain data, fills in the
// ones that don't have data.
//
// The length of the array must be equal to Shards.
// You indicate that a shard is missing by setting it to nil or zero-length.
// If a shard is zero-length but has sufficient capacity, that memory will
// be used, otherwise a new []byte will be allocated.
//
// If there are too few shards to reconstruct the missing
// ones, ErrTooFewShards will be returned.
//
// The reconstructed shard set is complete, but integrity is not verified.
// Use the Verify function to check if data set is ok.
func (r reedSolomon) Reconstruct(shards [][]byte) error {
	return r.reconstruct(shards, false)
}

// ReconstructData will recreate any missing data shards, if possible.
//
// Given a list of shards, some of which contain data, fills in the
// data shards that don't have data.
//
// The length of the array must be equal to Shards.
// You indicate that a shard is missing by setting it to nil or zero-length.
// If a shard is zero-length but has sufficient capacity, that memory will
// be used, otherwise a new []byte will be allocated.
//
// If there are too few shards to reconstruct the missing
// ones, ErrTooFewShards will be returned.
//
// As the reconstructed shard set may contain missing parity shards,
// calling the Verify function is likely to fail.
func (r reedSolomon) ReconstructData(shards [][]byte) error {
	return r.reconstruct(shards, true)
}

// reconstruct will recreate the missing data shards, and unless
// dataOnly is true, also the missing parity shards
//
// The length of the array must be equal to Shards.
// You indicate that a shard is missing by setting it to nil.
//
// If there are too few shards to reconstruct the missing
// ones, ErrTooFewShards will be returned.
func (r reedSolomon) reconstruct(shards [][]byte, dataOnly bool) error {
	if len(shards) != r.Shards {
		return ErrTooFewShards
	}
	// Check arguments.
	err := checkShards(shards, true)
	if err != nil {
		return err
	}

	shardSize := shardSize(shards)

	// Quick check: are all of the shards present?  If so, there's
	// nothing to do.
	numberPresent := 0
	for i := 0; i < r.Shards; i++ {
		if len(shards[i]) != 0 {
			numberPresent++
		}
	}
	if numberPresent == r.Shards {
		// Cool.  All of the shards data data.  We don't
		// need to do anything.
		return nil
	}

	// More complete sanity check
	if numberPresent < r.DataShards {
		return ErrTooFewShards
	}

	// Pull out an array holding just the shards that
	// correspond to the rows of the submatrix.  These shards
	// will be the input to the decoding process that re-creates
	// the missing data shards.
	//
	// Also, create an array of indices of the valid rows we do have
	// and the invalid rows we don't have up until we have enough valid rows.
	subShards := make([][]byte, r.DataShards)
	validIndices := make([]int, r.DataShards)
	invalidIndices := make([]int, 0)
	subMatrixRow := 0
	for matrixRow := 0; matrixRow < r.Shards && subMatrixRow < r.DataShards; matrixRow++ {
		if len(shards[matrixRow]) != 0 {
			subShards[subMatrixRow] = shards[matrixRow]
			validIndices[subMatrixRow] = matrixRow
			subMatrixRow++
		} else {
			invalidIndices = append(invalidIndices, matrixRow)
		}
	}

	// Attempt to get the cached inverted matrix out of the tree
	// based on the indices of the invalid rows.
	dataDecodeMatrix := r.tree.GetInvertedMatrix(invalidIndices)

	// If the inverted matrix isn't cached in the tree yet we must
	// construct it ourselves and insert it into the tree for the
	// future.  In this way the inversion tree is lazily loaded.
	if dataDecodeMatrix == nil {
		// Pull out the rows of the matrix that correspond to the
		// shards that we have and build a square matrix.  This
		// matrix could be used to generate the shards that we have
		// from the original data.
		subMatrix, _ := newMatrix(r.DataShards, r.DataShards)
		for subMatrixRow, validIndex := range validIndices {
			for c := 0; c < r.DataShards; c++ {
				subMatrix[subMatrixRow][c] = r.m[validIndex][c]
			}
		}
		// Invert the matrix, so we can go from the encoded shards
		// back to the original data.  Then pull out the row that
		// generates the shard that we want to decode.  Note that
		// since this matrix maps back to the original data, it can
		// be used to create a data shard, but not a parity shard.
		dataDecodeMatrix, err = subMatrix.Invert()
		if err != nil {
			return err
		}

		// Cache the inverted matrix in the tree for future use keyed on the
		// indices of the invalid rows.
		err = r.tree.InsertInvertedMatrix(invalidIndices, dataDecodeMatrix, r.Shards)
		if err != nil {
			return err
		}
	}

	// Re-create any data shards that were missing.
	//
	// The input to the coding is all of the shards we actually
	// have, and the output is the missing data shards.  The computation
	// is done using the special decode matrix we just built.
	outputs := make([][]byte, r.ParityShards)
	matrixRows := make([][]byte, r.ParityShards)
	outputCount := 0

	for iShard := 0; iShard < r.DataShards; iShard++ {
		if len(shards[iShard]) == 0 {
			if cap(shards[iShard]) >= shardSize {
				shards[iShard] = shards[iShard][0:shardSize]
			} else {
				shards[iShard] = make([]byte, shardSize)
			}
			outputs[outputCount] = shards[iShard]
			matrixRows[outputCount] = dataDecodeMatrix[iShard]
			outputCount++
		}
	}
	r.codeSomeShards(matrixRows, subShards, outputs[:outputCount], outputCount, shardSize)

	if dataOnly {
		// Exit out early if we are only interested in the data shards
		return nil
	}

	// Now that we have all of the data shards intact, we can
	// compute any of the parity that is missing.
	//
	// The input to the coding is ALL of the data shards, including
	// any that we just calculated.  The output is whichever of the
	// data shards were missing.
	outputCount = 0
	for iShard := r.DataShards; iShard < r.Shards; iShard++ {
		if len(shards[iShard]) == 0 {
			if cap(shards[iShard]) >= shardSize {
				shards[iShard] = shards[iShard][0:shardSize]
			} else {
				shards[iShard] = make([]byte, shardSize)
			}
			outputs[outputCount] = shards[iShard]
			matrixRows[outputCount] = r.parity[iShard-r.DataShards]
			outputCount++
		}
	}
	r.codeSomeShards(matrixRows, shards[:r.DataShards], outputs[:outputCount], outputCount, shardSize)
	return nil
}

// ErrShortData will be returned by Split(), if there isn't enough data
// to fill the number of shards.
var ErrShortData = errors.New("not enough data to fill the number of requested shards")

// Split a data slice into the number of shards given to the encoder,
// and create empty parity shards if necessary.
//
// The data will be split into equally sized shards.
// If the data size isn't divisible by the number of shards,
// the last shard will contain extra zeros.
//
// There must be at least 1 byte otherwise ErrShortData will be
// returned.
//
// The data will not be copied, except for the last shard, so you
// should not modify the data of the input slice afterwards.
func (r reedSolomon) Split(data []byte) ([][]byte, error) {
	if len(data) == 0 {
		return nil, ErrShortData
	}
	// Calculate number of bytes per data shard.
	perShard := (len(data) + r.DataShards - 1) / r.DataShards

	if cap(data) > len(data) {
		data = data[:cap(data)]
	}

	// Only allocate memory if necessary
	if len(data) < (r.Shards * perShard) {
		// Pad data to r.Shards*perShard.
		padding := make([]byte, (r.Shards*perShard)-len(data))
		data = append(data, padding...)
	}

	// Split into equal-length shards.
	dst := make([][]byte, r.Shards)
	for i := range dst {
		dst[i] = data[:perShard]
		data = data[perShard:]
	}

	return dst, nil
}

// ErrReconstructRequired is returned if too few data shards are intact and a
// reconstruction is required before you can successfully join the shards.
var ErrReconstructRequired = errors.New("reconstruction required as one or more required data shards are nil")

// Join the shards and write the data segment to dst.
//
// Only the data shards are considered.
// You must supply the exact output size you want.
//
// If there are to few shards given, ErrTooFewShards will be returned.
// If the total data size is less than outSize, ErrShortData will be returned.
// If one or more required data shards are nil, ErrReconstructRequired will be returned.
func (r reedSolomon) Join(dst io.Writer, shards [][]byte, outSize int) error {
	// Do we have enough shards?
	if len(shards) < r.DataShards {
		return ErrTooFewShards
	}
	shards = shards[:r.DataShards]

	// Do we have enough data?
	size := 0
	for _, shard := range shards {
		if shard == nil {
			return ErrReconstructRequired
		}
		size += len(shard)

		// Do we have enough data already?
		if size >= outSize {
			break
		}
	}
	if size < outSize {
		return ErrShortData
	}

	// Copy data to dst
	write := outSize
	for _, shard := range shards {
		if write < len(shard) {
			_, err := dst.Write(shard[:write])
			return err
		}
		n, err := dst.Write(shard)
		if err != nil {
			return err
		}
		write -= n
	}
	return nil
}