With the implementation of dummy GET ACL handlers,
tools like s3cmd perform few operations which causes
the ACL call to be invoked. Make sure that in our
router configuration GET?acl comes before actual
GET call to facilitate this dummy call.
tests were written in the manner by editing internal
variables of fsObjects to mimic certain behavior from
APIs, but this is racy when an active go-routine is
reading from the same variable.
Make sure to terminate the go-routine if possible for
these tests.
The current problem is that when you invoke
```
mc admin info myminio | head -1
● localhost:9000
```
This output is incorrect as the expected output should be
```
mc admin info myminio | head -1
● 192.168.1.17:9000
```
This commit adds a check to the server's admin-API such that it only
accepts Admin-API requests with authenticated bodies. Further this
commit updates the `madmin` package to always add the
`X-Amz-Content-Sha256` header.
This change improves the Admin-API security since the server does not
accept unauthenticated request bodies anymore.
After this commit `mc` must be updated to the new `madmin` api because
requests over TLS connections will fail.
This commit fixes a DoS vulnerability for certain APIs using
signature V4 by verifying the content-md5 and/or content-sha56 of
the request body in a streaming mode.
The issue was caused by reading the entire body of the request into
memory to verify the content-md5 or content-sha56 checksum if present.
The vulnerability could be exploited by either replaying a V4 request
(in the 15 min time frame) or sending a V4 presigned request with a
large body.
Removed field minio_http_requests_total as it was redundant with
minio_http_requests_duration_seconds_count
Also removed field minio_server_start_time_seconds as it was
redundant with process_start_time_seconds
GetBucketACL call returns empty for all GET in ACL requests,
the primary purpose of this PR is to provide legacy API support
for legacy applications.
Fixes#5706
Better support of HEAD and listing of zero sized objects with trailing
slash (a.k.a empty directory). For that, isLeafDir function is added
to indicate if the specified object is an empty directory or not. Each
backend (xl, fs) has the responsibility to store that information.
Currently, in both of XL & FS, an empty directory is represented by
an empty directory in the backend.
isLeafDir() checks if the given path is an empty directory or not,
since dir listing is costly if the latter contains too many objects,
readDirN() is added in this PR to list only N number of entries.
In isLeadDir(), we will only list one entry to check if a directory
is empty or not.
This commit fixes a DoS vulnerability in the
request authentication. The root cause is an 'unlimited'
read-into-RAM from the request body.
Since this read happens before the request authentication
is verified the vulnerability can be exploit without any
access privileges.
This commit limits the size of the request body to 3 MB.
This is about the same size as AWS. The limit seems to be
between 1.6 and 3.2 MB - depending on the AWS machine which
is handling the request.
This commit ensures that all tickers are stopped using defer ticker.Stop()
style. This will also fix one bug seen when a client starts to listen to
event notifications and that case will result a leak in tickers.
Current healing has an issue when disks are healed
even when they are offline without knowing if disk
is unformatted. This can lead to issues of pre-maturely
removing the disk from the set just because it was
temporarily offline.
There is an increasing number of `mc admin heal` usage
on a cron or regular basis. It is possible that if healing
code saw disk is offline it might prematurely take it down,
this causes availability issues.
Fixes#5826
Previously we used allow bucket policies without
`Version` field to be set to any given value, but
this behavior is inconsistent with AWS S3.
PR #5790 addressed this by making bucket policies
stricter and cleaner, but this causes a breaking
change causing any existing policies perhaps without
`Version` field or the field to be empty to fail upon
server startup.
This PR brings a code to migrate under these scenarios
as a one time operation.
- remove old bucket policy handling
- add new policy handling
- add new policy handling unit tests
This patch brings support to bucket policy to have more control not
limiting to anonymous. Bucket owner controls to allow/deny any rest
API.
For example server side encryption can be controlled by allowing
PUT/GET objects with encryptions including bucket owner.
This change disables the non-constant-time implementations of P-384 and P-521.
As a consequence a client using just these curves cannot connect to the server.
This should be no real issues because (all) clients at least support P-256.
Further this change also rejects ECDSA private keys of P-384 and P-521.
While non-constant-time implementations for the ECDHE exchange don't expose an
obvious vulnerability, using P-384 or P-521 keys for the ECDSA signature may allow
pratical timing attacks.
Fixes#5844
- getBucketLocation
- headBucket
- deleteBucket
Should return 404 or NoSuchBucket even for invalid bucket names, invalid
bucket names are only validated during MakeBucket operation
This is an effort to remove panic from the source.
Add a new call called CriticialIf, that calls LogIf and exits.
Replace panics with one of CriticalIf, FatalIf and a return of error.
Make sure to apply standard headers such as Content-Type,
Content-Disposition and Content-Language to the correct
GCS object attributes during object upload and copy operations.
Fixes: #5800
As we move to multiple config backends like local disk and etcd,
config file should not be read from the disk, instead the quick
package should load and verify for duplicate entries.
This change adds some security headers like Content-Security-Policy.
It does not set the HSTS header because Content-Security-Policy prevents
mixed HTTP and HTTPS content and the server does not use cookies.
However it is a header which could be added later on.
It also moves some header added by #5805 from a vendored file
to a generic handler.
Fixes ##5813
Also make sure to not modify the underlying errors from
layers, we should return the error as is and one object
layer should translate the errors.
Fixes#5797
This PR introduces ReloadFormat API call at objectlayer
to facilitate this. Previously we repurposed HealFormat
but we never ended up updating our reference format on
peers.
Fixes#5700
This change let the server return the S3 error for a key rotation
if the source key is not valid but equal to the destination key.
This change also fixes the SSE-C error messages since AWS returns error messages
ending with a '.'.
Fixes#5625
This change sets the storage class of the object-info if a storage
class was specified during PUT. The server now replies with the
storage class which was set during uploading the object in FS mode.
Fixes#5777
Default installations of cloned VMs on VMware like env
might experience serious problems with time skewing,
allow for a higher value instead of 3 seconds we are
moving to 15 minutes just like API level skew.
Access to internet and configuring ntp might not be possible,
in such situations providing atleast a 15 minute skew could
cater for majority of situations.
Since we do not re-use storageDisks after moving
the connections to object layer we should close them
appropriately otherwise we have a lot of connection
leaks and these can compound as the time goes by.
This PR also refactors the initialization code to
re-use storageDisks for given set of endpoints until
we have confirmed a valid reference format.
An issue was reproduced when there a no more inodes
available on an existing setup of 4 disks, now we
took one of the disks and reformatted it to relinquish
inodes. Now we attempt to bring the fresh disk back
into setup and perform a heal - at this point creating
new `format.json` fails on existing disks since they
do not have more inodes available.
At this point due to quorum failure, we end up deleting
existing `format.json` as well, this PR removes the code
which deletes existing `format.json` as there is no need
to delete them.
Previous PR 2afd196c83 fixed
the issue of quorum based listing for regular objects, this
PR continues on this idea by extending this support to
object directory prefixes as well.
Fixes#5733
Set GOPATH string to empty in build-constants.go
Check for both compile time GOPATH and default GOPATH
while trimming the file path in the stack trace.
Fixes#5741
This PR fixes two different variant of deadlocks in
notification.
- holding write lock on the bucket competing with read lock
- holding competing locks on read/save notification config
This PR adds disk based edge caching support for minio server.
Cache settings can be configured in config.json to take list of disk drives,
cache expiry in days and file patterns to exclude from cache or via environment
variables MINIO_CACHE_DRIVES, MINIO_CACHE_EXCLUDE and MINIO_CACHE_EXPIRY
Design assumes that Atime support is enabled and the list of cache drives is
fixed.
- Objects are cached on both GET and PUT/POST operations.
- Expiry is used as hint to evict older entries from cache, or if 80% of cache
capacity is filled.
- When object storage backend is down, GET, LIST and HEAD operations fetch
object seamlessly from cache.
Current Limitations
- Bucket policies are not cached, so anonymous operations are not supported in
offline mode.
- Objects are distributed using deterministic hashing among list of cache
drives specified.If one or more drives go offline, or cache drive
configuration is altered - performance could degrade to linear lookup.
Fixes#4026
This is a trival fix to support server level WORM. The feature comes
with an environment variable `MINIO_WORM`.
Usage:
```
$ export MINIO_WORM=on
$ minio server endpoint
```
Object deletion should not be possible if quorum is not
available. This PR updates deleteObject() to check for
quorum errors before proceeding with object deletion.
Fixes#5535
This commit adds the bucket delete and bucket policy functionalities
to the browser.
Part of rewriting the browser code to follow best practices and
guidelines of React (issues #5409 and #5410)
The backend code has been modified by @krishnasrinivas to prevent
issue #4498 from occuring. The relevant changes have been made to the
code according to the latest commit and the unit tests in the backend.
This commit also addresses issue #5449.
Migration regression got introduced in 9083bc152e
adding more unit tests to catch this scenario, we need to fix this by
re-writing the formats after the migration to 'V3'.
This bug only happens when a user is migrating directly from V1 to V3,
not from V1 to V2 and V2 to V3.
Added additional unit tests to cover these situations as well.
Fixes#5667
- Add head method for healthcheck endpoint. Some platforms/users
may use the HTTP Head method to check for health status.
- Add liveness and readiness probe examples in Kubernetes yaml
example docs. Note that readiness probe not added to StatefulSet
example due to https://github.com/kubernetes/kubernetes/issues/27114
With following changes
- Add SSE and refactor encryption API (#942) <Andreas Auernhammer>
- add copyObject test changing metadata and preserving etag (#944) <Harshavardhana>
- Add SSE-C tests for multipart, copy, get range operations (#941) <Harshavardhana>
- Removing conditional check for notificationInfoCh in api-notication (#940) <Matthew Magaldi>
- Honor prefix parameter in ListBucketPolicies API (#929) <kannappanr>
- test for empty objects uploaded with SSE-C headers (#927) <kannappanr>
- Encryption headers should also be set during initMultipart (#930) <Harshavardhana>
- Add support for Content-Language metadata header (#928) <kannappanr>
- Fix check for duplicate notification configuration entries (#917) <kannappanr>
- allow OS to cleanup sockets in TIME_WAIT (#925) <Harshavardhana>
- Sign V2: Fix signature calculation in virtual host style (#921) <A. Elleuch>
- bucket policy: Support json string in Principal field (#919) <A. Elleuch>
- Fix copyobject failure for empty files (#918) <kannappanr>
- Add new constructor NewWithOptions to SDK (#915) <poornas>
- Support redirect headers to sign again with new Host header. (#829) <Harshavardhana>
- Fail in PutObject if invalid user metadata is passed <Harshavadhana>
- PutObjectOptions Header: Don't include invalid header <Isaac Hess>
- increase max retry count to 10 (#913) <poornas>
- Add new regions for Paris and China west. (#905) <Harshavardhana>
- fix s3signer to use req.Host header (#899) <Bartłomiej Nogaś>
This PR adds readiness and liveness endpoints to probe Minio server
instance health. Endpoints can only be accessed without authentication
and the paths are /minio/health/live and /minio/health/ready for
liveness and readiness respectively.
The new healthcheck liveness endpoint is used for Docker healthcheck
now.
Fixes#5357Fixes#5514
In kubernetes statefulset like environments when secrets
are mounted to pods they have sub-directories, we should
ideally be only looking for regular files here and skip
all others.
Fix a compatibility issue with AWS S3 where to do key rotation
we need to replace an existing object's metadata. In such a
scenario "REPLACE" metadata directive is not necessary.
- Data from disk was being read after bitrot verification to return
data for GetObject. Strictly speaking this does not guarantee bitrot
protection, as disks may return bad data even temporarily.
- This fix reads data from disk, verifies data for bitrot and then
returns data to the client directly.
Current code didn't implement the logic to support
decrypting encrypted multiple parts, this PR fixes
by supporting copying encrypted multipart objects.
Currently we reply back `X-Minio-Internal` values
back to the client for an encrypted object, we should
filter these out and only reply AWS compatible headers.
*) Add Put/Get support of multipart in encryption
*) Add GET Range support for encryption
*) Add CopyPart encrypted support
*) Support decrypting of large single PUT object
Flags like `json, config-dir, quiet` are now honored even if they are
between minio and gateway in the cli, like, `minio --json gateway s3`.
Fixes#5403
Stable sort is needed when we are sorting based on two or more
distinct elements. When equal elements are indistinguishable,
such as with integers, or more generally, any data where the
entire element is the key like `PartNumber`, stability is not
an issue.
Refactor such that metadata and etag are
combined to a single argument `srcInfo`.
This is a precursor change for #5544 making
it easier for us to provide encryption/decryption
functions.
Harshavardhana
Krishna Srinivas
Andreas Auernhammer
Arjun Mishra
Yaroslav Skopets
kannappanr
Bala FA
Nitish Tiwari
Anis Elleuch
Praveen raj Mani
Ashish Kumar Sinha
wd256
cbenien
Krishna Srinivas
poornas
ebozduman
Kaan Kabalak
Krishna Srinivas
kannappanr
Yueh-Ting Chen
Aditya Manthramurthy
Krishnan Parthasarathi