In `(*cacheObjects).GetObjectNInfo` copy the metadata before spawning a goroutine.
Clean up a few map[string]string copies as well, reducing allocs and simplifying the code.
Fixes#10426
MaxConnsPerHost can potentially hang a call without any
way to timeout, we do not need this setting for our proxy
and gateway implementations instead IdleConn settings are
good enough.
Also ensure to use NewRequestWithContext and make sure to
take the disks offline only for network errors.
Fixes#10304
with the merge of https://github.com/etcd-io/etcd/pull/11823
etcd v3.5.0 will now have a properly imported versioned path
this fixes our pending migration to newer repo
Use a separate client for these calls that can take a long time.
Add request context to these so they are canceled when the client
disconnects instead except for ListObject which doesn't have any equivalent.
- Implement a new xl.json 2.0.0 format to support,
this moves the entire marshaling logic to POSIX
layer, top layer always consumes a common FileInfo
construct which simplifies the metadata reads.
- Implement list object versions
- Migrate to siphash from crchash for new deployments
for object placements.
Fixes#2111
This value is requested on every upload when there are multiple zones.
Since this will result in an RPC call to every remote disk this scales
quite badly in a distributed setup. Load every 1second interval.
2 servers, localhost only. In large distributed setups much bigger
gains can be expected.
```
Operations: 21743 -> 22454
* Average: +3.28% (+0.0 MiB/s) throughput, +3.28% (+11.9) obj/s
* Fastest: +3.37% (+0.0 MiB/s) throughput, +3.37% (+13.0) obj/s
* 50% Median: +3.03% (+0.0 MiB/s) throughput, +3.03% (+11.2) obj/s
* Slowest: +8.03% (+0.0 MiB/s) throughput, +8.03% (+22.8) obj/s
```
For easy management of this a generic helper has been added.
global WORM mode is a complex piece for which
the time has passed, with the advent of S3 compatible
object locking and retention implementation global
WORM is sort of deprecated, this has been mentioned
in our documentation for some time, now the time
has come for this to go.
- keep long running obd network tests alive
- fix error - wrong number of parents in process OBD info
- ensure that osinfo does not error out when inside containers
- remove limit on max number of connections per client transport
The generic client transport uses a default limit of 64 conns per transport.
This could end up limiting and throttling usage, and artificially slowing
down the performance of MinIO even on hardware capable of doing better.
Too many deployments come up with an odd number
of hosts or drives, to facilitate even distribution
among those setups allow for odd and prime numbers
based packs.
- Implement a graph algorithm to test network bandwidth from every
node to every other node
- Saturate any network bandwidth adaptively, accounting for slow
and fast network capacity
- Implement parallel drive OBD tests
- Implement a paging mechanism for OBD test to provide periodic updates to client
- Implement Sys, Process, Host, Mem OBD Infos
- Add conservative timeouts upto 3 minutes
for internode communication
- Add aggressive timeouts of 30 seconds
for gateway communication
Fixes#9105Fixes#8732Fixes#8881Fixes#8376Fixes#9028
this PR enforces md5sum verification for following
API's to be compatible with AWS S3 spec
- PutObjectRetention
- PutObjectLegalHold
Co-authored-by: Harshavardhana <harsha@minio.io>
Allow downloading goroutine dump to help detect leaks
or overuse of goroutines.
Extensions are now type dependent.
Change `profiling` -> `profile` prefix, since that is what they are
not the abstract concept.
Add dummy calls which respond success when ACL's
are set to be private and fails, if user tries
to change them from their default 'private'
Some applications such as nuxeo may have an
unnecessary requirement for this operation,
we support this anyways such that don't have
to fully implement the functionality just that
we can respond with success for default ACLs
First step is to ensure that Path component is not decoded
by gorilla/mux to avoid routing issues while handling
certain characters while uploading through PutObject()
Delay the decoding and use PathUnescape() to escape
the `object` path component.
Thanks to @buengese and @ncw for neat test cases for us
to test with.
Fixes#8950Fixes#8647
For 'snapshot' type profiles, record a 'before' profile that can be used
as `go tool pprof -base=before ...` to compare before and after.
"Before" profiles are included in the zipped package.
[`runtime.MemProfileRate`](https://golang.org/pkg/runtime/#pkg-variables)
should not be updated while the application is running, so we set it at startup.
Co-authored-by: Harshavardhana <harsha@minio.io>
On every restart of the server, usage was being
calculated which is not useful instead wait for
sufficient time to start the crawling routine.
This PR also avoids lots of double allocations
through strings, optimizes usage of string builders
and also avoids crawling through symbolic links.
Fixes#8844
Enabling the memory profiling has a significant impact on performance.
Reduce the profiling rate by 2 orders of magnitude. It is still 128x smaller than default so it should be plenty.
object lock config is enabled for a bucket.
Creating a bucket with object lock configuration
enabled does not automatically cause WORM protection
to be applied. PUT operation needs to specifically
request object locking or bucket has to have default
retention settings configured.
Fixes regression introduced in #8657
Use reference format to initialize lockers
during startup, also handle `nil` for NetLocker
in dsync and remove *errorLocker* implementation
Add further tuning parameters such as
- DialTimeout is now 15 seconds from 30 seconds
- KeepAliveTimeout is not 20 seconds, 5 seconds
more than default 15 seconds
- ResponseHeaderTimeout to 10 seconds
- ExpectContinueTimeout is reduced to 3 seconds
- DualStack is enabled by default remove setting
it to `true`
- Reduce IdleConnTimeout to 30 seconds from
1 minute to avoid idleConn build up
Fixes#8773
In certain organizations policy claim names
can be not just 'policy' but also things like
'roles', the value of this field might also
be *string* or *[]string* support this as well
In this PR we are still not supporting multiple
policies per STS account which will require a
more comprehensive change.
This ensures that we can update the
- .minio.sys is updated for accounting/data usage purposes
- .minio.sys is updated to indicate if backend is encrypted
or not.
Admin data usage info API returns the following
(Only FS & XL, for now)
- Number of buckets
- Number of objects
- The total size of objects
- Objects histogram
- Bucket sizes
level - this PR builds on #8120 which
added PutBucketObjectLockConfiguration and
GetBucketObjectLockConfiguration APIS
This PR implements PutObjectRetention,
GetObjectRetention API and enhances
PUT and GET API operations to display
governance metadata if permissions allow.
This PR implements locking from a global entity into
a more localized set level entity, allowing for locks
to be held only on the resources which are writing
to a collection of disks rather than a global level.
In this process this PR also removes the top-level
limit of 32 nodes to an unlimited number of nodes. This
is a precursor change before bring in bucket expansion.
- adding oauth support to MinIO browser (#8400) by @kanagaraj
- supports multi-line get/set/del for all config fields
- add support for comments, allow toggle
- add extensive validation of config before saving
- support MinIO browser to support proper claims, using STS tokens
- env support for all config parameters, legacy envs are also
supported with all documentation now pointing to latest ENVs
- preserve accessKey/secretKey from FS mode setups
- add history support implements three APIs
- ClearHistory
- RestoreHistory
- ListHistory
- add help command support for each config parameters
- all the bug fixes after migration to KV, and other bug
fixes encountered during testing.
net.Error is very unreliable in providing better error
handling, we need to ensure that we always have a fallback
option in case of network failures.
This fixes an important issue in our distributed server
setups when one of the servers is down, all deployments
out there are recommended to upgrade after this fix is
merged to ensure that availability is not lost.
Fixes#8127Fixes#8016Fixes#7964
In situations such as when client uploading data,
prematurely disconnects from server such as pressing
ctrl-c before uploading all the data. Under this
situation in distributed setup we prematurely
disconnect disks causing a reconnect loop. This has
an adverse affect we end up leaving a lot of files
in temporary location which ideally should have been
cleaned up when Put() prematurely fails.
This is also a regression which got introduced in #7610
Klaus Post
Harshavardhana
Anis Elleuch
poornas
Sidhartha Mani
Bala FA
Praveen raj Mani
Krishnan Parthasarathi