The local node name is heavily used in tracing, create a new global
variable to store it. Multiple goroutines can access it since it won't be
changed later.
currently when one of the peer is down, the
drives from that peer are reported as '0/0'
offline instead we should capture/filter the
drives from the peer and populate it appropriately
such that `mc admin info` displays correct info.
Creating notification events for replica creation
is not particularly useful to send as the notification
event generated at source already includes replication
completion events.
For applications using replica cluster as failover, avoiding
duplicate notifications for replica event will allow seamless
failover.
also re-use storage disks for all `mc admin server info`
calls as well, implement a new LocalStorageInfo() API
call at ObjectLayer to lookup local disks storageInfo
also fixes bugs where there were double calls to StorageInfo()
The previous code was iterating over replies from peers and assigning
pool numbers to them, thus missing to add it for the local server.
Fixed by iterating over the server properties of all the servers
including the local one.
Trace data can be rather large and compresses fine.
Compress profile data in zip files:
```
277.895.314 before.profiles.zip
152.800.318 after.profiles.zip
```
globalSubscribers.NumSubscribers() is heavily used in S3 requests and it
uses mutex, use atomic.Load instead since it is faster
Co-authored-by: Anis Elleuch <anis@min.io>
always find the right set of online peers for remote listing,
this may have an effect on listing if the server is down - we
should do this to avoid always performing transient operations
on bucket->peerClient that is permanently or down for a long
period.
This refactor is done for few reasons below
- to avoid deadlocks in scenarios when number
of nodes are smaller < actual erasure stripe
count where in N participating local lockers
can lead to deadlocks across systems.
- avoids expiry routines to run 1000 of separate
network operations and routes per disk where
as each of them are still accessing one single
local entity.
- it is ideal to have since globalLockServer
per instance.
- In a 32node deployment however, each server
group is still concentrated towards the
same set of lockers that partipicate during
the write/read phase, unlike previous minio/dsync
implementation - this potentially avoids send
32 requests instead we will still send at max
requests of unique nodes participating in a
write/read phase.
- reduces overall chattiness on smaller setups.
Bonus fixes, we do not need reload format anymore
as the replaced drive is healed locally we only need
to ensure that drive heal reloads the drive properly.
We preserve the UUID of the original order, this means
that the replacement in `format.json` doesn't mean that
the drive needs to be reloaded into memory anymore.
fixes#10791
Design: https://gist.github.com/klauspost/025c09b48ed4a1293c917cecfabdf21c
Gist of improvements:
* Cross-server caching and listing will use the same data across servers and requests.
* Lists can be arbitrarily resumed at a constant speed.
* Metadata for all files scanned is stored for streaming retrieval.
* The existing bloom filters controlled by the crawler is used for validating caches.
* Concurrent requests for the same data (or parts of it) will not spawn additional walkers.
* Listing a subdirectory of an existing recursive cache will use the cache.
* All listing operations are fully streamable so the number of objects in a bucket no
longer dictates the amount of memory.
* Listings can be handled by any server within the cluster.
* Caches are cleaned up when out of date or superseded by a more recent one.
Bonus fixes
- logging improvements to ensure that we don't use
`go logger.LogIf` to avoid runtime.Caller missing
the function name. log where necessary.
- remove unused code at erasure sets
In almost all scenarios MinIO now is
mostly ready for all sub-systems
independently, safe-mode is not useful
anymore and do not serve its original
intended purpose.
allow server to be fully functional
even with config partially configured,
this is to cater for availability of actual
I/O v/s manually fixing the server.
In k8s like environments it will never make
sense to take pod into safe-mode state,
because there is no real access to perform
any remote operation on them.
- select lockers which are non-local and online to have
affinity towards remote servers for lock contention
- optimize lock retry interval to avoid sending too many
messages during lock contention, reduces average CPU
usage as well
- if bucket is not set, when deleteObject fails make sure
setPutObjHeaders() honors lifecycle only if bucket name
is set.
- fix top locks to list out always the oldest lockers always,
avoid getting bogged down into map's unordered nature.
- Add owner information for expiry, locking, unlocking a resource
- TopLocks returns now locks in quorum by default, provides
a way to capture stale locks as well with `?stale=true`
- Simplify the quorum handling for locks to avoid from storage
class, because there were challenges to make it consistent
across all situations.
- And other tiny simplifications to reset locks.
- Implement a new xl.json 2.0.0 format to support,
this moves the entire marshaling logic to POSIX
layer, top layer always consumes a common FileInfo
construct which simplifies the metadata reads.
- Implement list object versions
- Migrate to siphash from crchash for new deployments
for object placements.
Fixes#2111
size calculation in crawler was using the real size
of the object instead of its actual size i.e either
a decrypted or uncompressed size.
this is needed to make sure all other accounting
such as bucket quota and mcs UI to display the
correct values.
This PR adds a new configuration parameter which allows readiness
check to respond within 10secs, this can be reduced to a lower value
if necessary using
```
mc admin config set api ready_deadline=5s
```
or
```
export MINIO_API_READY_DEADLINE=5s
```
This PR is a continuation from #9586, now the
entire parsing logic is fully merged into
bucket metadata sub-system, simplify the
quota API further by reducing the remove
quota handler implementation.
this is a major overhaul by migrating off all
bucket metadata related configs into a single
object '.metadata.bin' this allows us for faster
bootups across 1000's of buckets and as well
as keeps the code simple enough for future
work and additions.
Additionally also fixes#9396, #9394
This PR is to ensure that we call the relevant object
layer APIs for necessary S3 API level functionalities
allowing gateway implementations to return proper
errors as NotImplemented{}
This allows for all our tests in mint to behave
appropriately and can be handled appropriately as
well.
We should allow quorum errors to be send upwards
such that caller can retry while reading bucket
encryption/policy configs when server is starting
up, this allows distributed setups to load the
configuration properly.
Current code didn't facilitate this and would have
never loaded the actual configs during rolling,
server restarts.
This PR allows setting a "hard" or "fifo" quota
restriction at the bucket level. Buckets that
have reached the FIFO quota configured, will
automatically be cleaned up in FIFO manner until
bucket usage drops to configured quota.
If a bucket is configured with a "hard" quota
ceiling, all further writes are disallowed.
By monitoring PUT/DELETE and heal operations it is possible
to track changed paths and keep a bloom filter for this data.
This can help prioritize paths to scan. The bloom filter can identify
paths that have not changed, and the few collisions will only result
in a marginal extra workload. This can be implemented on either a
bucket+(1 prefix level) with reasonable performance.
The bloom filter is set to have a false positive rate at 1% at 1M
entries. A bloom table of this size is about ~2500 bytes when serialized.
To not force a full scan of all paths that have changed cycle bloom
filters would need to be kept, so we guarantee that dirty paths have
been scanned within cycle runs. Until cycle bloom filters have been
collected all paths are considered dirty.
this commit avoids lots of tiny allocations, repeated
channel creates which are performed when filtering
the incoming events, unescaping a key just for matching.
also remove deprecated code which is not needed
anymore, avoids unexpected data structure transformations
from the map to slice.
- Removes PerfInfo admin API as its not OBDInfo
- Keep the drive path without the metaBucket in OBD
global latency map.
- Remove all the unused code related to PerfInfo API
- Do not redefined global mib,gib constants use
humanize.MiByte and humanize.GiByte instead always
- Implement a graph algorithm to test network bandwidth from every
node to every other node
- Saturate any network bandwidth adaptively, accounting for slow
and fast network capacity
- Implement parallel drive OBD tests
- Implement a paging mechanism for OBD test to provide periodic updates to client
- Implement Sys, Process, Host, Mem OBD Infos
- acquire since leader lock for all background operations
- healing, crawling and applying lifecycle policies.
- simplify lifecyle to avoid network calls, which was a
bug in implementation - we should hold a leader and
do everything from there, we have access to entire
name space.
- make listing, walking not interfere by slowing itself
down like the crawler.
- effectively use global context everywhere to ensure
proper shutdown, in cache, lifecycle, healing
- don't read `format.json` for prometheus metrics in
StorageInfo() call.
- Add conservative timeouts upto 3 minutes
for internode communication
- Add aggressive timeouts of 30 seconds
for gateway communication
Fixes#9105Fixes#8732Fixes#8881Fixes#8376Fixes#9028
Allow downloading goroutine dump to help detect leaks
or overuse of goroutines.
Extensions are now type dependent.
Change `profiling` -> `profile` prefix, since that is what they are
not the abstract concept.
- pkg/bucket/encryption provides support for handling bucket
encryption configuration
- changes under cmd/ provide support for AES256 algorithm only
Co-Authored-By: Poorna <poornas@users.noreply.github.com>
Co-authored-by: Harshavardhana <harsha@minio.io>
Changes in IP underneath are dynamic in replica sets
with multiple tenants, so deploying in that fashion
will not work until we wait for atleast one participatory
server to be local.
This PR also ensures that multi-tenant zone expansion also
works in replica set k8s deployments.
Introduces a new ENV `KUBERNETES_REPLICA_SET` check to call
appropriate code paths.
Fixes an issue reported by @klauspost and @vadmeste
This PR also allows users to expand their clusters
from single node XL deployment to distributed mode.
StorageInfo() call is supposed to give each
server/disk information independently, rely
on this appropriately so that `mc admin info server`
gets correct information all the time.
level - this PR builds on #8120 which
added PutBucketObjectLockConfiguration and
GetBucketObjectLockConfiguration APIS
This PR implements PutObjectRetention,
GetObjectRetention API and enhances
PUT and GET API operations to display
governance metadata if permissions allow.
This PR implements locking from a global entity into
a more localized set level entity, allowing for locks
to be held only on the resources which are writing
to a collection of disks rather than a global level.
In this process this PR also removes the top-level
limit of 32 nodes to an unlimited number of nodes. This
is a precursor change before bring in bucket expansion.
This PR refactors object layer handling such
that upon failure in sub-system initialization
server reaches a stage of safe-mode operation
wherein only certain API operations are enabled
and available.
This allows for fixing many scenarios such as
- incorrect configuration in vault, etcd,
notification targets
- missing files, incomplete config migrations
unable to read encrypted content etc
- any other issues related to notification,
policies, lifecycle etc
- This PR allows config KVS to be validated properly
without being affected by ENV overrides, rejects
invalid values during set operation
- Expands unit tests and refactors the error handling
for notification targets, returns error instead of
ignoring targets for invalid KVS
- Does all the prep-work for implementing safe-mode
style operation for MinIO server, introduces a new
global variable to toggle safe mode based operations
NOTE: this PR itself doesn't provide safe mode operations
- adding oauth support to MinIO browser (#8400) by @kanagaraj
- supports multi-line get/set/del for all config fields
- add support for comments, allow toggle
- add extensive validation of config before saving
- support MinIO browser to support proper claims, using STS tokens
- env support for all config parameters, legacy envs are also
supported with all documentation now pointing to latest ENVs
- preserve accessKey/secretKey from FS mode setups
- add history support implements three APIs
- ClearHistory
- RestoreHistory
- ListHistory
- add help command support for each config parameters
- all the bug fixes after migration to KV, and other bug
fixes encountered during testing.
Current master repeatedly calls ListBuckets() during
initialization of multiple sub-systems
Use single ListBuckets() call for each sub-system as
follows
- LifeCycle
- Policy
- Notification
Harshavardhana
Anis Elleuch
Poorna Krishnamoorthy
Shireesh Anjal
Bala FA
Ritesh H Shukla
Klaus Post
Krishna Srinivas
Sidhartha Mani
Praveen raj Mani
Krishnan Parthasarathi
Ashish Kumar Sinha