HTTP likes to slap an infinite read deadline on a connection and
do a blocking read while the response is being written.
This effectively means that a reading deadline becomes the
request-response deadline.
Instead of enforcing our timeout, we pass it through and keep
"infinite deadline" is sticky on connections.
However, we still "record" when reads are aborted, so we never overwrite that.
The HTTP server should have `ReadTimeout` and `IdleTimeout` set for the deadline to be effective.
Use --idle-timeout for incoming connections.
Add TTFB for all requests in metrics-v3 in addition to the existing
GetObject. Also for the requests that do not return a body in the
response, calculate TTFB as the HTTP status code and the headers are
sent.
allow non-inlined on disk to be inlined via
an unversioned ReadVersion() call, we only
need ReadXL() to resolve objects with multiple
versions only.
The choice of this block makes it to be dynamic
and chosen by the user via `mc admin config set`
Other bonus things
- Start measuring internode TTFB performance.
- Set TCP_NODELAY, TCP_CORK for low latency
This change uses the updated ldap library in minio/pkg (bumped
up to v3). A new config parameter is added for LDAP configuration to
specify extra user attributes to load from the LDAP server and to store
them as additional claims for the user.
A test is added in sts_handlers.go that shows how to access the LDAP
attributes as a claim.
This is in preparation for adding SSH pubkey authentication to MinIO's SFTP
integration.
Replace the `io.Pipe` from streamingBitrotWriter -> CreateFile with a fixed size ring buffer.
This will add an output buffer for encoded shards to be written to disk - potentially via RPC.
This will remove blocking when `(*streamingBitrotWriter).Write` is called, and it writes hashes and data.
With current settings, the write looks like this:
```
Outbound
┌───────────────────┐ ┌────────────────┐ ┌───────────────┐ ┌────────────────┐
│ │ Parr. │ │ (http body) │ │ │ │
│ Bitrot Hash │ Write │ Pipe │ Read │ HTTP buffer │ Write (syscall) │ TCP Buffer │
│ Erasure Shard │ ──────────► │ (unbuffered) │ ────────────► │ (64K Max) │ ───────────────────► │ (4MB) │
│ │ │ │ │ (io.Copy) │ │ │
└───────────────────┘ └────────────────┘ └───────────────┘ └────────────────┘
```
We write a Hash (32 bytes). Since the pipe is unbuffered, it will block until the 32 bytes have
been delivered to the TCP buffer, and the next Read hits the Pipe.
Then we write the shard data. This will typically be bigger than 64KB, so it will block until two blocks
have been read from the pipe.
When we insert a ring buffer:
```
Outbound
┌───────────────────┐ ┌────────────────┐ ┌───────────────┐ ┌────────────────┐
│ │ │ │ (http body) │ │ │ │
│ Bitrot Hash │ Write │ Ring Buffer │ Read │ HTTP buffer │ Write (syscall) │ TCP Buffer │
│ Erasure Shard │ ──────────► │ (2MB) │ ────────────► │ (64K Max) │ ───────────────────► │ (4MB) │
│ │ │ │ │ (io.Copy) │ │ │
└───────────────────┘ └────────────────┘ └───────────────┘ └────────────────┘
```
The hash+shard will fit within the ring buffer, so writes will not block - but will complete after a
memcopy. Reads can fill the 64KB buffer if there is data for it.
If the network is congested, the ring buffer will become filled, and all syscalls will be on full buffers.
Only when the ring buffer is filled will erasure coding start blocking.
Since there is always "space" to write output data, we remove the parallel writing since we are
always writing to memory now, and the goroutine synchronization overhead probably not worth taking.
If the output were blocked in the existing, we would still wait for it to unblock in parallel write, so it would
make no difference there - except now the ring buffer smoothes out the load.
There are some micro-optimizations we could look at later. The biggest is that, in most cases,
we could encode directly to the ring buffer - if we are not at a boundary. Also, "force filling" the
Read requests (i.e., blocking until a full read can be completed) could be investigated and maybe
allow concurrent memory on read and write.
If site replication enabled across sites, replicate the SSE-C
objects as well. These objects could be read from target sites
using the same client encryption keys.
Signed-off-by: Shubhendu Ram Tripathi <shubhendu@minio.io>
just like client-conn-read-deadline, added a new flag that does
client-conn-write-deadline as well.
Both are not configured by default, since we do not yet know
what is the right value. Allow this to be configurable if needed.
support proxying of tagging requests in active-active replication
Note: even if proxying is successful, PutObjectTagging/DeleteObjectTagging
will continue to report a 404 since the object is not present locally.
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
sendfile implementation to perform DMA on all platforms
Go stdlib already supports sendfile/splice implementations
for
- Linux
- Windows
- *BSD
- Solaris
Along with this change however O_DIRECT for reads() must be
removed as well since we need to use sendfile() implementation
The main reason to add O_DIRECT for reads was to reduce the
chances of page-cache causing OOMs for MinIO, however it would
seem that avoiding buffer copies from user-space to kernel space
this issue is not a problem anymore.
There is no Go based memory allocation required, and neither
the page-cache is referenced back to MinIO. This page-
cache reference is fully owned by kernel at this point, this
essentially should solve the problem of page-cache build up.
With this now we also support SG - when NIC supports Scatter/Gather
https://en.wikipedia.org/wiki/Gather/scatter_(vector_addressing)
replace io.Discard usage to fix NUMA copy() latencies
On NUMA systems copying from 8K buffer allocated via
io.Discard leads to large latency build-up for every
```
copy(new8kbuf, largebuf)
```
can in-cur upto 1ms worth of latencies on NUMA systems
due to memory sharding across NUMA nodes.
Also shutdown poll add jitter, to verify if the shutdown
sequence can finish before 500ms, this reduces the overall
time taken during "restart" of the service.
Provides speedup for `mc admin service restart` during
active I/O, also ensures that systemd doesn't treat the
returned 'error' as a failure, certain configurations in
systemd can cause it to 'auto-restart' the process by-itself
which can interfere with `mc admin service restart`.
It can be observed how now restarting the service is
much snappier.
DNS refresh() in-case of MinIO can safely re-use
the previous values on bare-metal setups, since
bare-metal arrangements do not change DNS in any
manner commonly.
This PR simplifies that, we only ever need DNS caching
on bare-metal setups.
- On containerized setups do not enable DNS
caching at all, as it may have adverse effects on
the overall effectiveness of k8s DNS systems.
k8s DNS systems are dynamic and expect applications
to avoid managing DNS caching themselves, instead
provide a cleaner container native caching
implementations that must be used.
- update IsDocker() detection, including podman runtime
- move to minio/dnscache fork for a simpler package
