its possible that some multipart uploads would have
uploaded only single parts so relying on `len(o.Parts)`
alone is not sufficient, we need to look for ETag
pattern to be absolutely sure.
Some incorrect setups might have multiple audiences
where they are trying to use a single authentication
endpoint for multiple services.
Nevertheless OpenID spec allows it to make it
even more confusin for no good reason.
> It MUST contain the OAuth 2.0 client_id of the
> Relying Party as an audience value. It MAY also
> contain identifiers for other audiences. In the
> general case, the aud value is an array of case
> sensitive strings. In the common special case
> when there is one audience, the aud value MAY
> be a single case sensitive string.
fixes#12809
this healing optimization caused multiple
regressions in healing
- delete-markers incorrectly missing
heal and returning incorrect healing
results to client.
- missing individual 'parts' such
as for restored object or simply
for all objects just missing few parts.
This optimization is not necessary, we
should proceed to verify all cases possible
not just when metadata is inconsistent.
destination path and old path will be similar
when healing occurs, this can lead to healed
parts being again purged leading to always an
inconsistent state on an object which might
further cause reduction in quorum eventually.
delete-markers missing on drives were
not healed due to few things
disksWithAllParts() does not know-how
to deal with delete markers, add support
for that.
fixes#12787
- delete-markers are incorrectly reported
as corrupt with wrong data sent to client
'mc admin heal -r' on objects with delete
marker will report as 'grey' incorrectly.
- do not heal delete-markers during HeadObject()
this can lead to inconsistent order of heals
on the object, although this is not an issue
in terms of order of versions it is rather
simpler to keep the same order on all drives.
- defaultHealResult() should handle 'err == nil'
case such that valid cases should be handled
as 'drive' status OK.
- remove use of getOnlineDisks() instead rely on fallbackDisks()
when disk return errors like diskNotFound, unformattedDisk
use other fallback disks to list from, instead of paying the
price for checking getOnlineDisks()
- optimize getDiskID() further to avoid large write locks when
looking formatLastCheck time window
This new change allows for a more relaxed fallback for listing
allowing for more tolerance and also eventually gain more
consistency in results even if using '3' disks by default.
When configured in Lookup Bind mode, the server now periodically queries the
LDAP IDP service to find changes to a user's group memberships, and saves this
info to update the access policies for all temporary and service account
credentials belonging to LDAP users.
Add a new goroutine file which has another printing format. We need it
to see how much time each goroutine was blocked. Easier to detect stops.
Co-authored-by: Anis Elleuch <anis@min.io>
when TLS is configured using IPs directly
might interfere and not work properly when
the server is configured with TLS certs but
the certs only have domain certs.
Also additionally allow users to specify
a public accessible URL for console to talk
to MinIO i.e `MINIO_SERVER_URL` this would
allow them to use an external ingress domain
to talk to MinIO. This internally fixes few
problems such as presigned URL generation on
the console UI etc.
This needs to be done additionally for any
MinIO deployments that might have a much more
stricter requirement when running in standalone
mode such as FS or standalone erasure code.
This method is used to add expected expiration and transition time
for an object in GET/HEAD Object response headers.
Also fixed bugs in lifecycle.PredictTransitionTime and
getLifecycleTransitionTier in handling current and
non-current versions.
This allows remote bucket admin to identify the origin of transitioned
objects by simply inspecting the object prefixes.
e.g let's take a remote tier TIER-1 pointing to a remote bucket (prefix)
testbucket/testprefix-1. The remote bucket admin can list all transitioned objects
from a MinIO deployment identified by '2e78e906-1c5d-4f94-8689-9df44cafde39' and
source bucket 'mybucket' like so,
```
$ ./mc ls -r minio-tier-target/testbucket/testprefix-1/2e78e906-1c5d-4f94-8689-9df44cafde39/mybucket/
[2021-07-12 17:15:50 PDT] 160B 48/fb/48fbc0e6-3a73-458b-9337-8e722c619ca4
[2021-07-12 16:58:46 PDT] 160B 7d/1c/7d1c96bd-031a-48d4-99ea-b1304e870830
```
In case of non-distributed setup, if the server start command contains a
`--console-address` flag and its value contains a hostname, it is not
getting anonymized.
Fixed by replacing the console host also with `server1`
This commit gathers MRF metrics from
all nodes in a cluster and return it to the caller. This will show information about the
number of objects in the MRF queues
waiting to be healed.
In case of replication healing, we always store completed status in the
object metadata, which is wrong because replication could fail in the
further retries.
Ensure that hostnames / ip addresses are not printed in the subnet
health report. Anonymize them by replacing them with `servern` where `n`
represents the position of the server in the pool.
This is done by building a `host anonymizer` map that maps every
possible value containing the host e.g. host, host:port,
http://host:port, etc to the corresponding anonymized name and using
this map to replace the values at the time of health report generation.
A different logic is used to anonymize host names in the `procinfo`
data, as the host names are part of an ellipses pattern in the process
start command. Here we just replace the prefix/suffix of the ellipses
pattern with their hashes.
Gzip responses if appropriate, except GetObject requests.
List reponses has an almost 10:1 compression ratio with no
measurable slowdown (in fact it seems a bit faster).
- ParentUser for OIDC auth changed to `openid:`
instead of `jwt:` to avoid clashes with variable
substitution
- Do not pass in random parents into IsAllowed()
policy evaluation as it can change the behavior
of looking for correct policies underneath.
fixes#12676fixes#12680
with console addition users cannot login with
root credentials without etcd persistent layer,
allow a dummy store such that such functionalities
can be supported when running as non-persistent
manner, this enables all calls and operations.
MinIO might be running inside proxies, and
console while being on another port might not be
reachable on a specific port behind such proxies.
For such scenarios customize the redirect URL
such that console can be redirected to correct
proxy endpoint instead.
fixes#12661
Download files from *any* bucket/path as an encrypted zip file.
The key is included in the response but can be separated so zip
and the key doesn't have to be sent on the same channel.
Requires https://github.com/minio/pkg/pull/6
Additional support for vendor-specific admin API
integrations for OpenID, to ensure validity of
credentials on MinIO.
Every 5minutes check for validity of credentials
on MinIO with vendor specific IDP.
DiskInfo() calls can stagger and wait if run
serially timing out 10secs per drive, to avoid
this lets check DiskInfo in parallel to avoid
delays when nodes get disconnected.
Fixes brought forward from https://github.com/minio/minio/pull/12605
Fixes resolution when an object is in prefix of another and one zone returns the directory and another the object.
Fixes resolution on single entries that arrive first, so resolution doesn't depend on order.
auditLog should be attempted right before the
return of the function and not multiple times
per function, this ensures that we only trigger
it once per function call.
if object was uploaded with multipart. This is to ensure that
GetObject calls with partNumber in URI request parameters
have same behavior on source and replication target.
also do not incorrectly double count
objExists unless its selected and it
matches with previous entry.
Bonus: change listQuorum to match with
AskDisks to ensure that we atleast by
default choose all the "drives" that
we asked is consistent.
Bonus: remove kms_kes as sub-system, since its ENV only.
- also fixes a crash with etcd cluster without KMS
configured and also if KMS decryption is missing.
backend-encrypted doesn't need to be explicitly healed anymore
since this file is deleted upon upgrade and migration to the
KMS based encrypted config/IAM credentials.
goroutine 1 [running]:
runtime/internal/atomic.panicUnaligned()
/usr/local/go/src/runtime/internal/atomic/unaligned.go:8 +0x24
golang doc:
// BUG(rsc): On x86-32, the 64-bit functions use instructions unavailable before the Pentium MMX.
//
// On non-Linux ARM, the 64-bit functions use instructions unavailable before the ARMv6k core.
//
// On ARM, x86-32, and 32-bit MIPS,
// it is the caller's responsibility to arrange for 64-bit
// alignment of 64-bit words accessed atomically. The first word in a
// variable or in an allocated struct, array, or slice can be relied upon to be
// 64-bit aligned.
Create write lock on PutObject and CopyObject when on multi-pool setup.
Use the same lock as NewMultipartUpload so all creation calls share the same lock.
This feature also changes the default port where
the browser is running, now the port has moved
to 9001 and it can be configured with
```
--console-address ":9001"
```
When no results are sent `result.end` is never sent, so the list becomes hot until the list is full.
Break immediately when channel is closed.
Fixes#12518
previous PR incorrectly changed rename() from
tmp to -> tmp/.trash/uuid, since it is self
referential - to clear this up make sure its
renamed to a separate folder and deleted
in background - just like before.
Each multipart upload is holding a read lock for the entire upload
duration of each part.
This makes it impossible for other parts to complete until all currently
uploading parts have released their locks.
It will also make it impossible for new parts to start as long as the
write lock is still being requested, essentially deadlocking uploads
until all that may have been granted a read lock has been completed.
Refactor to only hold the upload id lock while reading and writing
the metadata, but hold a part id lock while the part is being uploaded.
This commit adds an admin API for fetching
the KMS status information (default key ID, endpoints, ...).
With this commit the server exposes REST endpoint:
```
GET <admin-api>/kms/status
```
Signed-off-by: Andreas Auernhammer <hi@aead.dev>
Web Handlers can generate STS tokens but forgot to create a parent user
and save it along with the temporary access account. This commit fixes
this.
fixes#12381
its possible that, version might exist on second pool such that
upon deleteBucket() might have deleted the bucket on pool1 successfully
since it doesn't have any objects, undo such operations properly in
all any error scenario.
Also delete bucket metadata from pool layer rather than sets layer.
objectErasureMap in the audit holds information about the objects
involved in the current S3 operation such as pool index, set an index,
and disk endpoints. One user saw a crash due to a concurrent update of
objectErasureMap information. Use sync.Map to prevent a crash.
Always use `GetActualSize` to get the part size, not just when encrypted.
Fixes mint test io.minio.MinioClient.uploadPartCopy,
error "Range specified is not valid for source object".
healing code was using incorrect buffers to heal older
objects with 10MiB erasure blockSize, incorrect calculation
of such buffers can lead to incorrect premature closure of
io.Pipe() during healing.
fixes#12410
- it is possible that during I/O failures we might
leave partially written directories, make sure
we purge them after.
- rename current data-dir (null) versionId only after
the newer xl.meta has been written fully.
- attempt removal once for minioMetaTmpBucket/uuid/
as this folder is empty if all previous operations
were successful, this allows avoiding recursive os.Remove()
- for single pool setups usage is not checked.
- for pools, only check the "set" in which it would be placed.
- keep a minimum number of inodes (when we know it).
- ignore for `.minio.sys`.
It makes sense that a node that has multiple disks starts when one
disk fails, returning an i/o error for example. This commit will make this
faulty tolerance available in this specific use case.
Due to incorrect KMS context constructed, we need to add
additional fallbacks and also fix the original root cause
to fix already migrated deployments.
Bonus remove double migration is avoided in gateway mode
for etcd, instead do it once in iam.Init(), also simplify
the migration by not migrating STS users instead let the
clients regenerate them.
- Adds versioning support for S3 based remote tiers that have versioning
enabled. This ensures that when reading or deleting we specify the specific
version ID of the object. In case of deletion, this is important to ensure that
the object version is actually deleted instead of simply being marked for
deletion.
- Stores the remote object's version id in the tier-journal. Tier-journal file
version is not bumped up as serializing the new struct version is
compatible with old journals without the remote object version id.
- `storageRESTVersion` is bumped up as FileInfo struct now includes a
`TransitionRemoteVersionID` member.
- Azure and GCS support for this feature will be added subsequently.
Co-authored-by: Krishnan Parthasarathi <krisis@users.noreply.github.com>
Also adding an API to allow resyncing replication when
existing object replication is enabled and the remote target
is entirely lost. With the `mc replicate reset` command, the
objects that are eligible for replication as per the replication
config will be resynced to target if existing object replication
is enabled on the rule.
This is to ensure that there are no projects
that try to import `minio/minio/pkg` into
their own repo. Any such common packages should
go to `https://github.com/minio/pkg`
IAM not initialized doesn't mean we can't still
read the content from the disk, we should just
allow the request to go-through if object layer
is initialized.
Real-time metrics calculated in-memory rely on the initial
replication metrics saved with data usage. However, this can
lag behind the actual state of the cluster at the time of server
restart leading to inaccurate Pending size/counts reported to
Prometheus. Dropping the Pending metrics as this can be more
reliably monitored by applications with replication notifications.
Signed-off-by: Poorna Krishnamoorthy <poorna@minio.io>
LDAPusername is the simpler form of LDAPUser (userDN),
using a simpler version is convenient from policy
conditions point of view, since these are unique id's
used for LDAP login.
In cases where a cluster is degraded, we do not uphold our consistency
guarantee and we will write fewer erasure codes and rely on healing
to recreate the missing shards.
In some cases replacing known bad disks in practice take days.
We want to change the behavior of a known degraded system to keep
the erasure code promise of the storage class for each object.
This will create the objects with the same confidence as a fully
functional cluster. The tradeoff will be that objects created
during a partial outage will take up slightly more space.
This means that when the storage class is EC:4, there should
always be written 4 parity shards, even if some disks are unavailable.
When an object is created on a set, the disks are immediately
checked. If any disks are unavailable additional parity shards
will be made for each offline disk, up to 50% of the number of disks.
We add an internal metadata field with the actual and intended
erasure code level, this can optionally be picked up later by
the scanner if we decide that data like this should be re-sharded.
Bonus change LDAP settings such as user, group mappings
are now listed as part of `mc admin user list` and
`mc admin group list`
Additionally this PR also deprecates the `/v2` API
that is no longer in use.
A configured audit logger or HTTP logger is validated during MinIO
server startup. Relax the timeout to 10 seconds in that case, otherwise,
both loggers won't be used.
1 second could be too low for a busy HTTP endpoint.
This commit fixes a bug causing the MinIO server to compute
the ETag of a single-part object as MD5 of the compressed
content - not as MD5 of the actual content.
This usually does not affect clients since the MinIO appended
a `-1` to indicate that the ETag belongs to a multipart object.
However, this behavior was problematic since:
- A S3 client being very strict should reject such an ETag since
the client uploaded the object via single-part API but got
a multipart ETag that is not the content MD5.
- The MinIO server leaks (via the ETag) that it compressed the
object.
This commit addresses both cases. Now, the MinIO server returns
an ETag equal to the content MD5 for single-part objects that got
compressed.
Signed-off-by: Andreas Auernhammer <aead@mail.de>
A lot of healing is likely to be on non-existing objects and
locks are very expensive and will slow down scanning
significantly.
In cases where all are valid or, all are broken allow
rejection without locking.
Keep the existing behavior, but move the check for
dangling objects to after the lock has been acquired.
```
_, err = getLatestFileInfo(ctx, partsMetadata, errs)
if err != nil {
return er.purgeObjectDangling(ctx, bucket, object, versionID, partsMetadata, errs, []error{}, opts)
}
```
Revert "heal: Hold lock when reading xl.meta from disks (#12362)"
This reverts commit abd32065aa
This PR fixes two bugs
- Remove fi.Data upon overwrite of objects from inlined-data to non-inlined-data
- Workaround for an existing bug on disk with latest releases to ignore fi.Data
and instead read from the disk for non-inlined-data
- Addtionally add a reserved metadata header to indicate data is inlined for
a given version.
Lock is hold in healObject() after reading xl.meta from disks the first
time. This commit will held the lock since the beginning of HealObject()
Co-authored-by: Anis Elleuch <anis@min.io>
Fixes `testSSES3EncryptedGetObjectReadSeekFunctional` mint test.
```
{
"args": {
"bucketName": "minio-go-test-w53hbpat649nhvws",
"objectName": "6mdswladz4vfpp2oit1pkn3qd11te5"
},
"duration": 7537,
"error": "We encountered an internal error, please try again.: cause(The requested range \"bytes 251717932 -> -116384170 of 135333762\" is not satisfiable.)",
"function": "GetObject(bucketName, objectName)",
"message": "CopyN failed",
"name": "minio-go: testSSES3EncryptedGetObjectReadSeekFunctional",
"status": "FAIL"
}
```
Compressed files always start at the beginning of a part so no additional offset should be added.
Previous PR #12351 added functions to read from the reader
stream to reduce memory usage, use the same technique in
few other places where we are not interested in reading the
data part.
in setups with lots of drives the server
startup is slow, initialize all local drives
in parallel before registering with muxer.
this speeds up when there are multiple pools
and large collection of drives.
This commit adds the `X-Amz-Server-Side-Encryption-Aws-Kms-Key-Id`
response header to the GET, HEAD, PUT and Download API.
Based on AWS documentation [1] AWS S3 returns the KMS key ID as part
of the response headers.
[1] https://docs.aws.amazon.com/AmazonS3/latest/userguide/specifying-kms-encryption.html
Signed-off-by: Andreas Auernhammer <aead@mail.de>
multi-disk clusters initialize buffer pools
per disk, this is perhaps expensive and perhaps
not useful, for a running server instance. As this
may disallow re-use of buffers across sets,
this change ensures that buffers across sets
can be re-used at drive level, this can reduce
quite a lot of memory on large drive setups.
In lieu of new changes coming for server command line, this
change is to deprecate strict requirement for distributed setups
to provide root credentials.
Bonus: remove MINIO_WORM warning from April 2020, it is time to
remove this warning.
However, this slice is also used for closing the writers, so close is never called on these.
Furthermore when an error is returned from a write it is now reported to the reader.
bonus: remove unused heal param from `newBitrotWriter`.
* Remove copy, now that we don't mutate.
At some places bloom filter tracker was getting
updated for `.minio.sys/tmp` bucket, there is no
reason to update bloom filters for those.
And add a missing bloom filter update for MakeBucket()
Bonus: purge unused function deleteEmptyDir()
gracefully start the server, if there are other drives
available - print enough information for administrator
to notice the errors in console.
Bonus: for really large streams use larger buffer for
writes.
- GetObject() should always use a common dataDir to
read from when it starts reading, this allows the
code in erasure decoding to have sane expectations.
- Healing should always heal on the common dataDir, this
allows the code in dangling object detection to purge
dangling content.
These both situations can happen under certain types of
retries during PUT when server is restarting etc, some
namespace entries might be left over.
attempt a delete on remote DNS store first before
attempting locally, because removing at DNS store
is cheaper than deleting locally, in case of
errors locally we can cheaply recreate the
bucket on dnsStore instead of.
This commit adds support for SSE-KMS bucket configurations.
Before, the MinIO server did not support SSE-KMS, and therefore,
it was not possible to specify an SSE-KMS bucket config.
Now, this is possible. For example:
```
mc encrypt set sse-kms some-key <alias>/my-bucket
```
Further, this commit fixes an issue caused by not supporting
SSE-KMS bucket configuration and switching to SSE-KMS as default
SSE method.
Before, the server just checked whether an SSE bucket config was
present (not which type of SSE config) and applied the default
SSE method (which was switched from SSE-S3 to SSE-KMS).
This caused objects to get encrypted with SSE-KMS even though a
SSE-S3 bucket config was present.
This issue is fixed as a side-effect of this commit.
Signed-off-by: Andreas Auernhammer <aead@mail.de>
when bidirectional replication is set up.
If ReplicaModifications is enabled in the replication
configuration, sync metadata updates to source if
replication rules are met. By default, if this
configuration is unset, MinIO automatically sync's
metadata updates on replica back to the source.
This commit adds a check to the MinIO server setup that verifies
that MinIO can reach KES, if configured, and that the default key
exists. If the default key does not exist it will create it
automatically.
Signed-off-by: Andreas Auernhammer <aead@mail.de>
A cache structure will be kept with a tree of usages.
The cache is a tree structure where each keeps track
of its children.
An uncompacted branch contains a count of the files
only directly at the branch level, and contains link to
children branches or leaves.
The leaves are "compacted" based on a number of properties.
A compacted leaf contains the totals of all files beneath it.
A leaf is only scanned once every dataUsageUpdateDirCycles,
rarer if the bloom filter for the path is clean and no lifecycles
are applied. Skipped leaves have their totals transferred from
the previous cycle.
A clean leaf will be included once every healFolderIncludeProb
for partial heal scans. When selected there is a one in
healObjectSelectProb that any object will be chosen for heal scan.
Compaction happens when either:
- The folder (and subfolders) contains less than dataScannerCompactLeastObject objects.
- The folder itself contains more than dataScannerCompactAtFolders folders.
- The folder only contains objects and no subfolders.
- A bucket root will never be compacted.
Furthermore, if a has more than dataScannerCompactAtChildren recursive
children (uncompacted folders) the tree will be recursively scanned and the
branches with the least number of objects will be compacted until the limit
is reached.
This ensures that any branch will never contain an unreasonable amount
of other branches, and also that small branches with few objects don't
take up unreasonable amounts of space.
Whenever a branch is scanned, it is assumed that it will be un-compacted
before it hits any of the above limits. This will make the branch rebalance
itself when scanned if the distribution of objects has changed.
TLDR; With current values: No bucket will ever have more than 10000
child nodes recursively. No single folder will have more than 2500 child
nodes by itself. All subfolders are compacted if they have less than 500
objects in them recursively.
We accumulate the (non-deletemarker) version count for paths as well,
since we are changing the structure anyway.
MRF does not detect when a node is disconnected and reconnected quickly
this change will ensure that MRF is alerted by comparing the last disk
reconnection timestamp with the last MRF check time.
Signed-off-by: Anis Elleuch <anis@min.io>
Co-authored-by: Klaus Post <klauspost@gmail.com>
wait groups are necessary with io.Pipes() to avoid
races when a blocking function may not be expected
and a Write() -> Close() before Read() races on each
other. We should avoid such situations..
Co-authored-by: Klaus Post <klauspost@gmail.com>
This commit replaces the custom KES client implementation
with the KES SDK from https://github.com/minio/kes
The SDK supports multi-server client load-balancing and
requests retry out of the box. Therefore, this change reduces
the overall complexity within the MinIO server and there
is no need to maintain two separate client implementations.
Signed-off-by: Andreas Auernhammer <aead@mail.de>
This commit enforces the usage of AES-256
for config and IAM data en/decryption in FIPS
mode.
Further, it improves the implementation of
`fips.Enabled` by making it a compile time
constant. Now, the compiler is able to evaluate
the any `if fips.Enabled { ... }` at compile time
and eliminate unused code.
Signed-off-by: Andreas Auernhammer <aead@mail.de>
p.writers is a verbatim value of bitrotWriter
backed by a pipe() that should never be nil'ed,
instead use the captured errors to skip the writes.
additionally detect also short writes, and reject
them as errors.
currently GetUser() returns 403 when IAM is not initialized
this can lead to applications crashing, instead return 503
so that the applications can retry and backoff.
fixes#12078
as there is no automatic way to detect if there
is a root disk mounted on / or /var for the container
environments due to how the root disk information
is masked inside overlay root inside container.
this PR brings an environment variable to set
root disk size threshold manually to detect the
root disks in such situations.
This commit fixes a bug in the single-part object decryption
that is triggered in case of SSE-KMS. Before, it was assumed
that the encryption is either SSE-C or SSE-S3. In case of SSE-KMS
the SSE-C branch was executed. This lead to an invalid SSE-C
algorithm error.
This commit fixes this by inverting the `if-else` logic.
Now, the SSE-C branch only gets executed when SSE-C headers
are present.
Signed-off-by: Andreas Auernhammer <aead@mail.de>
This commit fixes a bug introduced by af0c65b.
When there is no / an empty client-provided SSE-KMS
context the `ParseMetadata` may return a nil map
(`kms.Context`).
When unsealing the object key we must check that
the context is nil before assigning a key-value pair.
Signed-off-by: Andreas Auernhammer <aead@mail.de>
UpdateServiceAccount ignores updating fields when not passed from upper
layer, such as empty policy, empty account status, and empty secret key.
This PR will check for a secret key only if it is empty and add more
check on the value of the account status.
Signed-off-by: Anis Elleuch <anis@min.io>
This commit adds basic SSE-KMS support.
Now, a client can specify the SSE-KMS headers
(algorithm, optional key-id, optional context)
such that the object gets encrypted using the
SSE-KMS method. Further, auto-encryption now
defaults to SSE-KMS.
This commit does not try to do any refactoring
and instead tries to implement SSE-KMS as a minimal
change to the code base. However, refactoring the entire
crypto-related code is planned - but needs a separate
effort.
Signed-off-by: Andreas Auernhammer <aead@mail.de>
It is possible in some scenarios that in multiple pools,
two concurrent calls for the same object as a multipart operation
can lead to duplicate entries on two different pools.
This PR fixes this
- hold locks to serialize multiple callers so that we don't race.
- make sure to look for existing objects on the namespace as well
not just for existing uploadIDs
When running MinIO server without LDAP/OpenID, we should error out when
the code tries to create a service account for a non existant regular
user.
Bonus: refactor the check code to be show all cases more clearly
Signed-off-by: Anis Elleuch <anis@min.io>
Co-authored-by: Anis Elleuch <anis@min.io>
This commit adds basic SSE-KMS support.
Now, a client can specify the SSE-KMS headers
(algorithm, optional key-id, optional context)
such that the object gets encrypted using the
SSE-KMS method. Further, auto-encryption now
defaults to SSE-KMS.
This commit does not try to do any refactoring
and instead tries to implement SSE-KMS as a minimal
change to the code base. However, refactoring the entire
crypto-related code is planned - but needs a separate
effort.
Signed-off-by: Andreas Auernhammer <aead@mail.de>
Co-authored-by: Klaus Post <klauspost@gmail.com>
avoid time_wait build up with getObject requests if there are
pending callers and they timeout, can lead to time_wait states
Bonus share the same buffer pool with erasure healing logic,
additionally also fixes a race where parallel readers were
never cleanup during Encode() phase, because pipe.Reader end
was never closed().
Added closer right away upon an error during Encode to make
sure to avoid racy Close() while stream was still being
Read().
This commit fixes a bug when parsing the env. variable
`MINIO_KMS_SECRET_KEY`. Before, the env. variable
name - instead of its value - was parsed. This (obviously)
did not work properly.
This commit fixes this.
Signed-off-by: Andreas Auernhammer <aead@mail.de>
cleanup functions should never be cleaned before the reader is
instantiated, this type of design leads to situations where order
of lockers and places for them to use becomes confusing.
Allow WithCleanupFuncs() if the caller wishes to add cleanupFns
to be run upon close() or an error during initialization of the
reader.
Also make sure streams are closed before we unlock the resources,
this allows for ordered cleanup of resources.
upon errors to acquire lock context would still leak,
since the cancel would never be called. since the lock
is never acquired - proactively clear it before returning.
failed queue should be used for retried requests to
avoid cascading the failures into incoming queue, this
would allow for a more fair retry for failed replicas.
Additionally also avoid taking context in queue task
to avoid confusion, simplifies its usage.
There can be situations where replication completed but the
`X-Amz-Replication-Status` metadata update failed such as
when the server returns 503 under high load. This object version will
continue to be picked up by the scanner and replicateObject would perform
no action since the versions match between source and target.
The metadata would never reflect that replication was successful
without this fix, leading to repeated re-queuing.
This commit enhances the docs about IAM encryption.
It adds a quick-start section that explains how to
get started quickly with `MINIO_KMS_SECRET_KEY`
instead of setting up KES.
It also removes the startup message that gets printed
when the server migrates IAM data to plaintext.
We will point this out in the release notes.
Signed-off-by: Andreas Auernhammer <aead@mail.de>
OpenID connect generated service accounts do not work
properly after console logout, since the parentUser state
is lost - instead use sub+iss claims for parentUser, according
to OIDC spec both the claims provide the necessary stability
across logins etc.
Currently, only credentials could be updated with
`mc admin bucket remote edit`.
Allow updating synchronous replication flag, path,
bandwidth and healthcheck duration on buckets, and
a flag to disable proxying in active-active replication.
