This PR implements locking from a global entity into
a more localized set level entity, allowing for locks
to be held only on the resources which are writing
to a collection of disks rather than a global level.
In this process this PR also removes the top-level
limit of 32 nodes to an unlimited number of nodes. This
is a precursor change before bring in bucket expansion.
This PR refactors object layer handling such
that upon failure in sub-system initialization
server reaches a stage of safe-mode operation
wherein only certain API operations are enabled
and available.
This allows for fixing many scenarios such as
- incorrect configuration in vault, etcd,
notification targets
- missing files, incomplete config migrations
unable to read encrypted content etc
- any other issues related to notification,
policies, lifecycle etc
- Supports migrating only when the credential ENVs are set,
so any FS mode deployments which do not have ENVs set will
continue to remain as is.
- Credential ENVs can be rotated using MINIO_ACCESS_KEY_OLD
and MINIO_SECRET_KEY_OLD envs, in such scenarios it allowed
to rotate the encrypted content to a new admin key.
- This PR allows config KVS to be validated properly
without being affected by ENV overrides, rejects
invalid values during set operation
- Expands unit tests and refactors the error handling
for notification targets, returns error instead of
ignoring targets for invalid KVS
- Does all the prep-work for implementing safe-mode
style operation for MinIO server, introduces a new
global variable to toggle safe mode based operations
NOTE: this PR itself doesn't provide safe mode operations
- adding oauth support to MinIO browser (#8400) by @kanagaraj
- supports multi-line get/set/del for all config fields
- add support for comments, allow toggle
- add extensive validation of config before saving
- support MinIO browser to support proper claims, using STS tokens
- env support for all config parameters, legacy envs are also
supported with all documentation now pointing to latest ENVs
- preserve accessKey/secretKey from FS mode setups
- add history support implements three APIs
- ClearHistory
- RestoreHistory
- ListHistory
- add help command support for each config parameters
- all the bug fixes after migration to KV, and other bug
fixes encountered during testing.
Current master repeatedly calls ListBuckets() during
initialization of multiple sub-systems
Use single ListBuckets() call for each sub-system as
follows
- LifeCycle
- Policy
- Notification
Add LDAP based users-groups system
This change adds support to integrate an LDAP server for user
authentication. This works via a custom STS API for LDAP. Each user
accessing the MinIO who can be authenticated via LDAP receives
temporary credentials to access the MinIO server.
LDAP is enabled only over TLS.
User groups are also supported via LDAP. The administrator may
configure an LDAP search query to find the group attribute of a user -
this may correspond to any attribute in the LDAP tree (that the user
has access to view). One or more groups may be returned by such a
query.
A group is mapped to an IAM policy in the usual way, and the server
enforces a policy corresponding to all the groups and the user's own
mapped policy.
When LDAP is configured, the internal MinIO users system is disabled.
When a peer client which higher version sends a request to a peer
server with lower version, the returned status code is 200 OK instead
of 405 code. The reason is that the peer client request reaches the
browser handler, which registers itself by '/minio' route but without
any other constraints. Adding filtering by user agent header to the
browser route so internal requests to old endpoints versions return
405 error code.
This PR is based off @sinhaashish's PR for object lifecycle
management, which includes support only for,
- Expiration of object
- Filter using object prefix (_not_ object tags)
N B the code for actual expiration of objects will be included in a
subsequent PR.
This commit relaxes the restriction that the MinIO gateway
does not accept SSE-KMS headers. Now, the S3 gateway allows
SSE-KMS headers for PUT and MULTIPART PUT requests and forwards them
to the S3 gateway backend (AWS). This is considered SSE pass-through
mode.
Fixes#7753
- Background Heal routine receives heal requests from a channel, either to
heal format, buckets or objects
- Daily sweeper lists all objects in all buckets, these objects
don't necessarly have read quorum so they can be removed if
these objects are unhealable
- Heal daily ops receives objects from the daily sweeper
and send them to the heal routine.
IsTruncated should not be set to true if there is no further
possible entries beyond maxKeys.
This commit will also move wide testing on object API from xl
to xl sets.
Bulk delete at storage level in Multiple Delete Objects API
In order to accelerate bulk delete in Multiple Delete objects API,
a new bulk delete is introduced in storage layer, which will accept
a list of objects to delete rather than only one. Consequently,
a new API is also need to be added to Object API.
- [x] Support bucket and regular object operations
- [x] Supports Select API on HDFS
- [x] Implement multipart API support
- [x] Completion of ListObjects support
Most hadoop distributions hortonworks, cloudera all
depend on aws-sdk-java 1.7.x to 1.10.x - the releases
which have bugs related case sensitive check for
ETag header. Go changes the case of the headers set
to be canonical but only preserves them when set
through a direct map.
This fixes most compatibility issues we have had
in the past supporting older hadoop distributions.
This change allows indefinitely running go-routines to cleanup
gracefully.
This channel is now closed at the beginning of each test so that
long-running go-routines quit and a new one is assigned.
Different gateway implementations due to different backend
API errors, might return different unsupported errors at
our handler layer. Current code posed a problem for us because
this information was lost and we would convert it to InternalError
in this situation all S3 clients end up retrying the request.
To avoid this unexpected situation implement a way to support
this cleanly such that the underlying information is not lost
which is returned by gateway.
This PR adds pass-through, single encryption at gateway and double
encryption support (gateway encryption with pass through of SSE
headers to backend).
If KMS is set up (either with Vault as KMS or using
MINIO_SSE_MASTER_KEY),gateway will automatically perform
single encryption. If MINIO_GATEWAY_SSE is set up in addition to
Vault KMS, double encryption is performed.When neither KMS nor
MINIO_GATEWAY_SSE is set, do a pass through to backend.
When double encryption is specified, MINIO_GATEWAY_SSE can be set to
"C" for SSE-C encryption at gateway and backend, "S3" for SSE-S3
encryption at gateway/backend or both to support more than one option.
Fixes#6323, #6696
To conform with AWS S3 Spec on ETag for SSE-S3 encrypted objects,
encrypt client sent MD5Sum and store it on backend as ETag.Extend
this behavior to SSE-C encrypted objects.
In many situations, while testing we encounter
ErrInternalError, to reduce logging we have
removed logging from quite a few places which
is acceptable but when ErrInternalError occurs
we should have a facility to log the corresponding
error, this helps to debug Minio server.
This PR introduces two new features
- AWS STS compatible STS API named AssumeRoleWithClientGrants
```
POST /?Action=AssumeRoleWithClientGrants&Token=<jwt>
```
This API endpoint returns temporary access credentials, access
tokens signature types supported by this API
- RSA keys
- ECDSA keys
Fetches the required public key from the JWKS endpoints, provides
them as rsa or ecdsa public keys.
- External policy engine support, in this case OPA policy engine
- Credentials are stored on disks
The new call combines GetObjectInfo and GetObject, and returns an
object with a ReadCloser interface.
Also adds a number of end-to-end encryption tests at the handler
level.
This PR adds two new admin APIs in Minio server and madmin package:
- GetConfigKeys(keys []string) ([]byte, error)
- SetConfigKeys(params map[string]string) (err error)
A key is a path in Minio configuration file, (e.g. notify.webhook.1)
The user will always send a string value when setting it in the config file,
the API will know how to convert the value to the appropriate type. The user
is also able to set a raw json.
Before setting a new config, Minio will validate all fields and try to connect
to notification targets if available.
One typo introduced in a recent commit miscalculates if worm and browser
are enabled or not. A simple test is also added to detect this issue
in the future if it ever happens again.
This PR is the first set of changes to move the config
to the backend, the changes use the existing `config.json`
allows it to be migrated such that we can save it in on
backend disks.
In future releases, we will slowly migrate out of the
current architecture.
Fixes#6182
Currently, requestid field in logEntry is not populated, as the
requestid field gets set at the very end.
It is now set before regular handler functions. This is also
useful in setting it as part of the XML error response.
Travis build for ppc64le has been quite inconsistent and stays queued
for most of the time. Removing this build as part of Travis.yml for
the time being.
Minio server was preventing itself to start when any notification
target is down and not running. The PR changes the behavior by
avoiding startup abort in that case, so the user will still
be able to access Minio server using mc admin commands after
a restart or set config commands.
Added support for new RPC support using HTTP POST. RPC's
arguments and reply are Gob encoded and sent as HTTP
request/response body.
This patch also removes Go RPC based implementation.
- remove old bucket policy handling
- add new policy handling
- add new policy handling unit tests
This patch brings support to bucket policy to have more control not
limiting to anonymous. Bucket owner controls to allow/deny any rest
API.
For example server side encryption can be controlled by allowing
PUT/GET objects with encryptions including bucket owner.
This PR adds disk based edge caching support for minio server.
Cache settings can be configured in config.json to take list of disk drives,
cache expiry in days and file patterns to exclude from cache or via environment
variables MINIO_CACHE_DRIVES, MINIO_CACHE_EXCLUDE and MINIO_CACHE_EXPIRY
Design assumes that Atime support is enabled and the list of cache drives is
fixed.
- Objects are cached on both GET and PUT/POST operations.
- Expiry is used as hint to evict older entries from cache, or if 80% of cache
capacity is filled.
- When object storage backend is down, GET, LIST and HEAD operations fetch
object seamlessly from cache.
Current Limitations
- Bucket policies are not cached, so anonymous operations are not supported in
offline mode.
- Objects are distributed using deterministic hashing among list of cache
drives specified.If one or more drives go offline, or cache drive
configuration is altered - performance could degrade to linear lookup.
Fixes#4026
With following changes
- Add SSE and refactor encryption API (#942) <Andreas Auernhammer>
- add copyObject test changing metadata and preserving etag (#944) <Harshavardhana>
- Add SSE-C tests for multipart, copy, get range operations (#941) <Harshavardhana>
- Removing conditional check for notificationInfoCh in api-notication (#940) <Matthew Magaldi>
- Honor prefix parameter in ListBucketPolicies API (#929) <kannappanr>
- test for empty objects uploaded with SSE-C headers (#927) <kannappanr>
- Encryption headers should also be set during initMultipart (#930) <Harshavardhana>
- Add support for Content-Language metadata header (#928) <kannappanr>
- Fix check for duplicate notification configuration entries (#917) <kannappanr>
- allow OS to cleanup sockets in TIME_WAIT (#925) <Harshavardhana>
- Sign V2: Fix signature calculation in virtual host style (#921) <A. Elleuch>
- bucket policy: Support json string in Principal field (#919) <A. Elleuch>
- Fix copyobject failure for empty files (#918) <kannappanr>
- Add new constructor NewWithOptions to SDK (#915) <poornas>
- Support redirect headers to sign again with new Host header. (#829) <Harshavardhana>
- Fail in PutObject if invalid user metadata is passed <Harshavadhana>
- PutObjectOptions Header: Don't include invalid header <Isaac Hess>
- increase max retry count to 10 (#913) <poornas>
- Add new regions for Paris and China west. (#905) <Harshavardhana>
- fix s3signer to use req.Host header (#899) <Bartłomiej Nogaś>
This PR implements an object layer which
combines input erasure sets of XL layers
into a unified namespace.
This object layer extends the existing
erasure coded implementation, it is assumed
in this design that providing > 16 disks is
a static configuration as well i.e if you started
the setup with 32 disks with 4 sets 8 disks per
pack then you would need to provide 4 sets always.
Some design details and restrictions:
- Objects are distributed using consistent ordering
to a unique erasure coded layer.
- Each pack has its own dsync so locks are synchronized
properly at pack (erasure layer).
- Each pack still has a maximum of 16 disks
requirement, you can start with multiple
such sets statically.
- Static sets set of disks and cannot be
changed, there is no elastic expansion allowed.
- Static sets set of disks and cannot be
changed, there is no elastic removal allowed.
- ListObjects() across sets can be noticeably
slower since List happens on all servers,
and is merged at this sets layer.
Fixes#5465Fixes#5464Fixes#5461Fixes#5460Fixes#5459Fixes#5458Fixes#5460Fixes#5488Fixes#5489Fixes#5497Fixes#5496
in-memory caching cannot be cleanly implemented
without the access to GC which Go doesn't naturally
provide. At times we have seen that object caching
is more of an hindrance rather than a boon for
our use cases.
Removing it completely from our implementation
related to #5160 and #5182
- Changes related to moving admin APIs
- admin APIs now have an endpoint under /minio/admin
- admin APIs are now versioned - a new API to server the version is
added at "GET /minio/admin/version" and all API operations have the
path prefix /minio/admin/v1/<operation>
- new service stop API added
- credentials change API is moved to /minio/admin/v1/config/credential
- credentials change API and configuration get/set API now require TLS
so that credentials are protected
- all API requests now receive JSON
- heal APIs are disabled as they will be changed substantially
- Heal API changes
Heal API is now provided at a single endpoint with the ability for a
client to start a heal sequence on all the data in the server, a
single bucket, or under a prefix within a bucket.
When a heal sequence is started, the server returns a unique token
that needs to be used for subsequent 'status' requests to fetch heal
results.
On each status request from the client, the server returns heal result
records that it has accumulated since the previous status request. The
server accumulates upto 1000 records and pauses healing further
objects until the client requests for status. If the client does not
request any further records for a long time, the server aborts the
heal sequence automatically.
A heal result record is returned for each entity healed on the server,
such as system metadata, object metadata, buckets and objects, and has
information about the before and after states on each disk.
A client may request to force restart a heal sequence - this causes
the running heal sequence to be aborted at the next safe spot and
starts a new heal sequence.
This fix removes logrus package dependency and refactors the console
logging as the only logging mechanism by removing file logging support.
It rearranges the log message format and adds stack trace information
whenever trace information is not available in the error structure.
It also adds `--json` flag support for server logging.
When minio server is started with `--json` flag, all log messages are
displayed in json format, with no start-up and informational log
messages.
Fixes#5265#5220#5197
This adds configurable data and parity options on a per object
basis. To use variable parity
- Users can set environment variables to cofigure variable
parity
- Then add header x-amz-storage-class to putobject requests
with relevant storage class values
Fixes#4997
This change introduces following simplified steps to follow
during config migration.
```
// Steps to move from version N to version N+1
// 1. Add new struct serverConfigVN+1 in config-versions.go
// 2. Set configCurrentVersion to "N+1"
// 3. Set serverConfigCurrent to serverConfigVN+1
// 4. Add new migration function (ex. func migrateVNToVN+1()) in config-migrate.go
// 5. Call migrateVNToVN+1() from migrateConfig() in config-migrate.go
// 6. Make changes in config-current_test.go for any test change
```
Verify() was being called by caller after the data
has been successfully read after io.EOF. This disconnection
opens a race under concurrent access to such an object.
Verification is not necessary outside of Read() call,
we can simply just do checksum verification right inside
Read() call at io.EOF.
This approach simplifies the usage.
This PR addresses a long standing dependency on
`gopkg.in/check.v1` project used for our tests.
All tests are re-written to use the go default
testing framework instead.
There was no reason for us to use an external
package where Go tools are sufficient for this.
This is done to avoid repeated declaration of not-implemented
functions for each gateway. It also avoids a possible bug in go
https://github.com/golang/go/issues/18468 which is triggered on
our multiple PRs already.
Previously we were wrongly adding `?` as part
of the resource name, add a test case to check
if this is handled properly.
Thanks to @kannappanr for reproducing this.
Without this change presigned URL generated with following
command would fail with signature mismatch.
```
aws s3 presign s3://testbucket/functional-tests.sh
```
Since go1.8 os.RemoveAll and os.MkdirAll both support long
path names i.e UNC path on windows. The code we are carrying
was directly borrowed from `pkg/os` package and doesn't need
to be in our repo anymore. As a side affect this also
addresses our codecoverage issue.
Refer #4658
This is to comply with S3 behavior, we previously removed
reading `fs.json` for optimization reasons but we have a
reason to believe that providing ETag and using gjson
provides needed benefit of not having to deal with
unmarshalling overhead of golang stdlib.
Fixes#4028
We can't use Content-Encoding to verify if `aws-chunked` is set
or not. Just use 'streaming' signature header instead.
While this is considered mandatory, on the contrary aws-sdk-java
doesn't set this value
http://docs.aws.amazon.com/AmazonS3/latest/API/sigv4-streaming.html
```
Set the value to aws-chunked.
```
We will relax it and behave appropriately. Also this PR supports
saving custom encoding after trimming off the `aws-chunked`
parameter.
Fixes#3983
This is to keep the portability and also avoid errors that
might occur using the functions written for URL resource name
Since query param values have different escaping requirements.
Harshavardhana
Krishna Srinivas
Aditya Manthramurthy
Anis Elleuch
Krishnan Parthasarathi
Andreas Auernhammer
kannappanr
poornas
Praveen raj Mani
Bala FA
Krishna Srinivas
Krishna Srinivas
ebozduman
Nitish Tiwari
Karthic Rao