requests in federated setups for STS type calls which are
performed at '/' resource should be routed by the muxer,
the assumption is simply such that requests without a bucket
in a federated setup cannot be proxied, so serve them at
current server.
This commit makes the KES client use HTTP/2
when establishing a connection to the KES server.
This is necessary since the next KES server release
will require HTTP/2.
We should allow quorum errors to be send upwards
such that caller can retry while reading bucket
encryption/policy configs when server is starting
up, this allows distributed setups to load the
configuration properly.
Current code didn't facilitate this and would have
never loaded the actual configs during rolling,
server restarts.
In large setups this avoids unnecessary data transfer
across nodes and potential locks.
This PR also optimizes heal result channel, which should
be avoided for each queueHealTask as its expensive
to create/close channels for large number of objects.
This PR allows setting a "hard" or "fifo" quota
restriction at the bucket level. Buckets that
have reached the FIFO quota configured, will
automatically be cleaned up in FIFO manner until
bucket usage drops to configured quota.
If a bucket is configured with a "hard" quota
ceiling, all further writes are disallowed.
ResponseWriter & RecordAPIStats has similar role, merge them.
This commit will also fix wrong auditing for STS and Web and others
since they are using ResponseWriter instead of the RecordAPIStats.
A user can incorrectly mounts a newly fresh disk. MinIO will detect
that it is writing with a rootfs disk and will mark it down. However,
it is hard for the user to understand what's going on.
This commit will just print a notice so it will be easy to spot
such use case.
- elasticsearch client should rely on the SDK helpers
instead of pure HTTP calls.
- webhook shouldn't need to check for IsActive() for
all notifications, failure should be delayed.
- Remove DialHTTP as its never used properly
Fixes#9460
allow generating service accounts for temporary credentials
which have a designated parent, currently OpenID is not yet
supported.
added checks to ensure that service account cannot generate
further service accounts for itself, service accounts can
never be a parent to any credential.
Audit was not working properly when enabled from the environment
caused by a typo in the code.
This commit fixes that but also consider the following variables:
`MINIO_LOGGER_WEBHOOK_ENABLE_*` and
`MINIO_AUDIT_WEBHOOK_ENABLE_*` so the user can use
this latter to temporarily disable a logger or audit configuration.
data usage tracker and crawler seem to be logging
non-actionable information on console, which is not
useful and is fixed on its own in almost all deployments,
lets keep this logging to minimal.
it is possible in many screnarios that even
if the divisible value is optimal, we may
end up with uneven distribution due to number
of nodes present in the configuration.
added code allow for affinity towards various
ellipses to figure out optimal value across
ellipses such that we can always reach a
symmetric value automatically.
Fixes#9416
By monitoring PUT/DELETE and heal operations it is possible
to track changed paths and keep a bloom filter for this data.
This can help prioritize paths to scan. The bloom filter can identify
paths that have not changed, and the few collisions will only result
in a marginal extra workload. This can be implemented on either a
bucket+(1 prefix level) with reasonable performance.
The bloom filter is set to have a false positive rate at 1% at 1M
entries. A bloom table of this size is about ~2500 bytes when serialized.
To not force a full scan of all paths that have changed cycle bloom
filters would need to be kept, so we guarantee that dirty paths have
been scanned within cycle runs. Until cycle bloom filters have been
collected all paths are considered dirty.
this commit avoids lots of tiny allocations, repeated
channel creates which are performed when filtering
the incoming events, unescaping a key just for matching.
also remove deprecated code which is not needed
anymore, avoids unexpected data structure transformations
from the map to slice.
we have policy available for sub-admin users to set/get/delete
config, but we incorrectly decrypt the content using admin secret
key which in-fact should be the credential authenticating the
request.
global WORM mode is a complex piece for which
the time has passed, with the advent of S3 compatible
object locking and retention implementation global
WORM is sort of deprecated, this has been mentioned
in our documentation for some time, now the time
has come for this to go.
re-implement the cache purging routine to
avoid using ioutil.ReadDir which can lead
to high allocations when there are cache
directories with lots of content, or
when cache is installed in memory constrainted
environments.
Instead rely on a callback function where we
are not using memory no-more than 8KiB per
cycle.
Precursor for this change refer #9425, original
issue pointed by Caleb Case <caleb@storj.io>
OSS go sdk lacks licensing terms in their
repository, and there has been no activity
On the issue here https://github.com/aliyun/aliyun-oss-go-sdk/issues/245
This PR is to ensure we remove any dependency code which
lacks explicit license file in their repo.
- keep long running obd network tests alive
- fix error - wrong number of parents in process OBD info
- ensure that osinfo does not error out when inside containers
- remove limit on max number of connections per client transport
The generic client transport uses a default limit of 64 conns per transport.
This could end up limiting and throttling usage, and artificially slowing
down the performance of MinIO even on hardware capable of doing better.
New value defaults to 100K events by default,
but users can tune this value upto any value
they seem necessary.
* increase the limit to maxint64 while validating
This PR also fixes issues when
deletePolicy, deleteUser is idempotent so can lead to
issues when client can prematurely timeout, so a retry
call error response should be ignored when call returns
http.StatusNotFound
Fixes#9347
allow `mc admin config set mygateway/ audit_webhook --env`
to fetch the documentation as needed, this is just to
ensure that our users can still access the relevant
ENV docs while running in gateway mode.
Instead of GlobalContext use a local context for tests.
Most notably this allows stuff created to be shut down
when tests using it is done. After PR #9345 9331 CI is
often running out of memory/time.
Add two new configuration entries, api.requests-max and
api.requests-deadline which have the same role of
MINIO_API_REQUESTS_MAX and MINIO_API_REQUESTS_DEADLINE.
This PR fixes couple of behaviors with service accounts
- not need to have session token for service accounts
- service accounts can be generated by any user for themselves
implicitly, with a valid signature.
- policy input for AddNewServiceAccount API is not fully typed
allowing for validation before it is sent to the server.
- also bring in additional context for admin API errors if any
when replying back to client.
- deprecate GetServiceAccount API as we do not need to reply
back session tokens
- Introduced a function `FetchRegisteredTargets` which will return
a complete set of registered targets irrespective to their states,
if the `returnOnTargetError` flag is set to `False`
- Refactor NewTarget functions to return non-nil targets
- Refactor GetARNList() to return a complete list of configured targets
- Removes PerfInfo admin API as its not OBDInfo
- Keep the drive path without the metaBucket in OBD
global latency map.
- Remove all the unused code related to PerfInfo API
- Do not redefined global mib,gib constants use
humanize.MiByte and humanize.GiByte instead always
if needed use --no-compat to disable md5sum while
verifying any performance numbers.
bring back --compat behavior as default to avoid
additional documentation and confusing behavior,
as we are working towards improving md5sum to
be faster on AVX instructions, enabling this
should be hardly a problem in future versions
of MinIO.
fixes#8012fixes#7859fixes#7642
Continuing from previous PR #9304, comment
is a special key is not present in the
default KV list. Add it explicitly when
tokenizing fields as it may be possible that
some clients might try to set comments.
This PR adds context-based `k=v` splits based
on the sub-system which was obtained, if the
keys are not provided an error will be thrown
during parsing, if keys are provided with wrong
values an error will be thrown. Keys can now
have values which are of a much more complex
form such as `k="v=v"` or `k=" v = v"`
and other variations.
additionally, deprecate unnecessary postgres/mysql
configuration styles, support only
- connection_string for Postgres
- dsn_string for MySQL
All other parameters are removed.
This commit fixes a performance issue caused
by too many calls to the external KMS - i.e.
for single-part PUT requests.
In general, the issue is caused by a sub-optimal
code structure. In particular, when the server
encrypts an object it requests a new data encryption
key from the KMS. With this key it does some key
derivation and encrypts the object content and
ETag.
However, to behave S3-compatible the MinIO server
has to return the plaintext ETag to the client
in case SSE-S3.
Therefore, the server code used to decrypt the
(previously encrypted) ETag again by requesting
the data encryption key (KMS decrypt API) from
the KMS.
This leads to 2 KMS API calls (1 generate key and
1 decrypt key) per PUT operation - while only
one KMS call is necessary.
This commit fixes this by fetching a data key only
once from the KMS and keeping the derived object
encryption key around (for the lifetime of the request).
This leads to a significant performance improvement
w.r.t. to PUT workloads:
```
Operation: PUT
Operations: 161 -> 239
Duration: 28s -> 29s
* Average: +47.56% (+25.8 MiB/s) throughput, +47.56% (+2.6) obj/s
* Fastest: +55.49% (+34.5 MiB/s) throughput, +55.49% (+3.5) obj/s
* 50% Median: +58.24% (+32.8 MiB/s) throughput, +58.24% (+3.3) obj/s
* Slowest: +1.83% (+0.6 MiB/s) throughput, +1.83% (+0.1) obj/s
```
Fixes#8667
In addition to the above, if the user is mapped to a policy or
belongs in a group, the user-info API returns this information,
but otherwise, the API will now return a non-existent user error.
make rest of the Walk() function more predictable,
it was observed that in nominal deployments even
without much workload the drives are generally
slow for respond for readdir operations, for the
sleepDuration factor of 10 this can cause
unexpected slowness in the Listing calls, while
it is good for all other I/O, it may simply slow
down Listing immensely which is not useful.
fixes#9261
In FS mode under Windows, removing an object will not automatically.
remove parent empty prefixes.
The reason is that path.Dir() was used, however filepath.Dir() is
more appropriate since filepath is physical (meaning it operates
on OS filesystem paths)
This is not caught because failure for Windows CI is not caught.
