- adding oauth support to MinIO browser (#8400) by @kanagaraj
- supports multi-line get/set/del for all config fields
- add support for comments, allow toggle
- add extensive validation of config before saving
- support MinIO browser to support proper claims, using STS tokens
- env support for all config parameters, legacy envs are also
supported with all documentation now pointing to latest ENVs
- preserve accessKey/secretKey from FS mode setups
- add history support implements three APIs
- ClearHistory
- RestoreHistory
- ListHistory
- add help command support for each config parameters
- all the bug fixes after migration to KV, and other bug
fixes encountered during testing.
The measures are consolidated to the following metrics
- `disk_storage_used` : Disk space used by the disk.
- `disk_storage_available`: Available disk space left on the disk.
- `disk_storage_total`: Total disk space on the disk.
- `disks_offline`: Total number of offline disks in current MinIO instance.
- `disks_total`: Total number of disks in current MinIO instance.
- `s3_requests_total`: Total number of s3 requests in current MinIO instance.
- `s3_errors_total`: Total number of errors in s3 requests in current MinIO instance.
- `s3_requests_current`: Total number of active s3 requests in current MinIO instance.
- `internode_rx_bytes_total`: Total number of internode bytes received by current MinIO server instance.
- `internode_tx_bytes_total`: Total number of bytes sent to the other nodes by current MinIO server instance.
- `s3_rx_bytes_total`: Total number of s3 bytes received by current MinIO server instance.
- `s3_tx_bytes_total`: Total number of s3 bytes sent by current MinIO server instance.
- `minio_version_info`: Current MinIO version with commit-id.
- `s3_ttfb_seconds_bucket`: Histogram that holds the latency information of the requests.
And this PR also modifies the current StorageInfo queries
- Decouples StorageInfo from ServerInfo .
- StorageInfo is enhanced to give endpoint information.
NOTE: ADMIN API VERSION IS BUMPED UP IN THIS PR
Fixes#7873
specific errors, `application` errors or `all` by default.
console logging on server by default lists all logs -
enhance admin console API to accept `type` as query parameter to
subscribe to application/minio logs.
- This PR fixes situation to avoid underflow, this is possible
because of disconnected operations in replay/sendEvents
- Hold right locks if Del() operation is performed in Get()
- Remove panic in the code and use loggerOnce
- Remove Timer and instead use Ticker instead for proper ticks
This change is related to larger config migration PR
change, this is a first stage change to move our
configs to `cmd/config/` - divided into its subsystems
Force sum/average to be calculated as a float.
As noted in #8221
> run SELECT AVG(CAST (Score as int)) FROM S3Object on
```
Name,Score
alice,80
bob,81
```
> AWS S3 gives 80.5 and MinIO gives 80.
This also makes overflows much more unlikely.
Updates #7475
The Java implementation has a 128KB buffer and a message must be emitted before that is used. #7475 therefore limits the message size to 128KB. But up to 256 bytes are written to the buffer in each call. This means we must emit a message before shorter than 128KB.
Therefore we change the limit to 128KB minus 256 bytes.
Queue output items and reuse them.
Remove the unneeded type system in sql and just use the Go type system.
In best case this is more than an order of magnitude speedup:
```
BenchmarkSelectAll_1M-12 1 1841049400 ns/op 274299728 B/op 4198522 allocs/op
BenchmarkSelectAll_1M-12 14 84833400 ns/op 169228346 B/op 3146541 allocs/op
```
It looks like from implementation point of view fastjson
parser pool doesn't behave the same way as expected
when dealing many `xl.json` from multiple disks.
The fastjson parser pool usage ends up returning incorrect
xl.json entries for checksums, with references pointing
to older entries. This led to the subtle bug where checksum
info is duplicated from a previous xl.json read of a different
file from different disk.
This commit adds an admin API route and handler for
requesting status information about a KMS key.
Therefore, the client specifies the KMS key ID (when
empty / not set the server takes the currently configured
default key-ID) and the server tries to perform a dummy encryption,
re-wrap and decryption operation. If all three succeed we know that
the server can access the KMS and has permissions to generate, re-wrap
and decrypt data keys (policy is set correctly).
The change now is to ensure that we take custom URL as
well for updating the deployment, this is required for
hotfix deliveries for certain deployments - other than
the community release.
This commit changes the previous work d65a2c6725
with newer set of requirements.
Also deprecates PeerUptime()
Add API to set policy mapping for a user or group
Contains a breaking Admin APIs change.
- Also enforce all applicable policies
- Removes the previous /set-user-policy API
Bump up peerRESTVersion
Add get user info API to show groups of a user
Without explicit conversion to UTC() from Unix
time the zone information is lost, this leads
to XML marshallers marshaling the time into
a wrong format.
This PR fixes the compatibility issue with AWS STS
API by keeping Expiration format close to ISO8601
or RFC3339
Fixes#8041
This change adds admin APIs and IAM subsystem APIs to:
- add or remove members to a group (group addition and deletion is
implicit on add and remove)
- enable/disable a group
- list and fetch group info
When checking if federation is necessary, the code compares
the SRV record stored in etcd against the list of endpoints
that the MinIO server is exposing. If there is an intersection
in this list the request is forwarded.
The SRV record includes both the host and the port, but the
intersection check previously only looked at the IP address. This
would prevent federation from working in situations where the endpoint
IP is the same for multiple MinIO servers. Some examples of where this
can occur are:
- running mulitiple copies of MinIO on the same host
- using multiple MinIO servers behind a NAT with port-forwarding
Golang proactively prints this error
`http: proxy error: context canceled`
when a request arrived to the current deployment and
redirected to another deployment in a federated setup.
Since this error can confuse users, this commit will
just hide it.
Allow renaming/editing a notification config. By replying with
a successful GetBucketNotification response, without checking
for any missing config ARN in targetList.
Fixes#7650
Related to #7982, this PR refactors the code
such that we validate the OPA or JWKS in a
common place.
This is also a refactor which is already done
in the new config migration change. Attempt
to avoid any network I/O during Unmarshal of
JSON from disk, instead do it later when
updating the in-memory data structure.
Problem: MinIO incorrectly appends DNS SRV records of buckets that have a prefix match with a given bucket. E.g bucket1 would incorrectly get bucket's DNS records too.
Solution: This fix ensures that we only add SRV records that match the key exactly
This PR is based off @sinhaashish's PR for object lifecycle
management, which includes support only for,
- Expiration of object
- Filter using object prefix (_not_ object tags)
N B the code for actual expiration of objects will be included in a
subsequent PR.
The SQL parser as it stands right now ignores alias for aggregate
result, e.g. `SELECT COUNT(*) AS thing FROM s3object` doesn't actually
return record like `{"thing": 42}`, it returns a record like `{"_1": 42}`.
Column alias for aggregate result is supported in AWS's S3 Select, so
this commit fixes that by respecting the `expr.As` in the expression.
Also improve test for S3 select
On top of testing a simple `SELECT` query, we want to test a few more
"advanced" queries (e.g. aggregation).
Convert existing tests into table driven tests[1], and add the new test
cases with "advanced" queries into them.
[1] - https://github.com/golang/go/wiki/TableDrivenTests
This API returns the information related to the self healing routine.
For the moment, it returns:
- The total number of objects that are scanned
- The last time when an item was scanned
This PR adds support for adding session policies
for further restrictions on STS credentials, useful
in situations when applications want to generate
creds for multiple interested parties with different
set of policy restrictions.
This session policy is not mandatory, but optional.
Fixes#7732
This PR fixes a security issue where an IAM user based
on his policy is granted more privileges than restricted
by the users IAM policy.
This is due to an issue of prefix based Matcher() function
which was incorrectly matching prefix based on resource
prefixes instead of exact match.
With these changes we are now able to peak performances
for all Write() operations across disks HDD and NVMe.
Also adds readahead for disk reads, which also increases
performance for reads by 3x.
Harshavardhana
Praveen raj Mani
Ashish Kumar Sinha
Andreas Auernhammer
poornas
Klaus Post
Bala FA
Krishnan Parthasarathi
Yao Zongyou
Krishna Srinivas
Aditya Manthramurthy
maihde
Anis Elleuch
maihde
Christian Muehlhaeuser
Kanagaraj M
Ryan Tam
iliul
Joe Stevens