FS/Multipart: Fix race between PutObjectPart and Complete/Abort multipart. close(timeoutCh) on complete/abort so that a racing PutObjectPart does not leave a dangling go-routine.
Fixes#3351
This change brings in changes at multiple places
- Reuse buffers at almost all locations ranging
from rpc, fs, xl, checksum etc.
- Change caching behavior to disable itself
under low memory conditions i.e < 8GB of RAM.
- Only objects cached are of size 1/10th the size
of the cache for example if 4GB is the cache size
the maximum object size which will be cached
is going to be 400MB. This change is an
optimization to cache more objects rather
than few larger objects.
- If object cache is enabled default GC
percent has been reduced to 20% in lieu
with newly found behavior of GC. If the cache
utilization reaches 75% of the maximum value
GC percent is reduced to 10% to make GC
more aggressive.
- Do not use *bytes.Buffer* due to its growth
requirements. For every allocation *bytes.Buffer*
allocates an additional buffer for its internal
purposes. This is undesirable for us, so
implemented a new cappedWriter which is capped to a
desired size, beyond this all writes rejected.
Possible fix for #3403.
- This is to ensure that the any new config references made to the
serverConfig is also backed by a mutex lock.
- Otherwise any new config assigment will also replace the member mutex
which is currently used for safe access.
EOF err message in Peek Protocol is shown when a client closes the
connection in the middle of peek protocol, this commit hides it since it
doesn't make sense to show it
Current code always appends to a file only if 1byte or
more was sent on the wire was affecting both PutObject
and PutObjectPart uploads.
This patch fixes such a situation and resolves#3385
backgroundAppend type's abort method should wait for appendParts to finish
writing ongoing appending of parts in the background before cleaning up
the part files.
Previously minio server expects content-length-range values as integer
in JSON. However Amazon S3 handles content-length-range values as
integer and strings.
This patch adds support for string values.
Since we moved out reconnection logic from net-rpc-client.go
we should do it from the top-layer properly and bring back
the code to reconnect properly in-case the connection is lost.
setGlobalsFromContext() is added to set global variables after parsing
command line arguments. Thus, global flags will be honored wherever
they are placed in minio command.
Make sure all S3 signature requests are not re-directed
to `/minio`. This should be only done for JWT and some
Anonymous requests.
This also fixes a bug found from https://github.com/bji/libs3
```
$ s3 -u list
ERROR: XmlParseFailure
```
Now after this fix shows proper output
```
$ s3 -u list
Bucket Created
-------------------------------------------------------- --------------------
andoria 2016-11-27T08:19:06Z
```
It would make sense to enable logger just after config initialisation.
That way, errorIf() and fatalIf() will be usable and can catch error
like invalid access and key errors.
This patch brings in changes from miniobrowser repo.
- Bucket policy UI and functionality fixes by @krishnasrinivas
- Bucket policy implementation by @balamurugana
- UI changes and new functionality changing password etc. @rushenn
- UI and new functionality for sharing URLs, deleting files
@rushenn and @krishnasrinivas.
- Other misc fixes by @vadmeste @brendanashworth
This is needed to validate if the `format.json` indeed exists
when a fresh node is brought online.
This wrapped implementation also connects to the remote node
by attempting a re-login. Subsequently after a successful
connect `format.json` is validated as well.
Fixes#3207
logurs is not helping us to set different log formats (json/text) to
different loggers. Now, we create different logurs instances and call
them in errorIf and fatalIf
This change adds more richer error response
for JSON-RPC by interpreting object layer
errors to corresponding meaningful errors
for the web browser.
```go
&json2.Error{
Message: "Bucket Name Invalid, Only lowercase letters, full stops, and numbers are allowed.",
}
```
Additionally this patch also allows PresignedGetObject()
to take expiry parameter to have variable expiry.
XL multipart fails to remove tmp files when an error occurs during upload, this case covers the scenario where an upload is canceled manually by the client in the middle of job.
content-length-range policy in postPolicy API was
not working properly handle it. The reflection
strategy used has changed in recent version of Go.
Any free form interface{} of any integer is treated
as `float64` this caused a bug where content-length-range
parsing failed to provide any value.
Fixes#3295
This is needed as explained by @krisis
Lets say we have following errors.
```
[]error{nil, errFileNotFound, errDiskAccessDenied, errDiskAccesDenied}
```
Since the last two errors are filtered, the maximum is nil,
depending on map order.
Let's say we get nil from reduceErr. Clearly at this point
we don't have quorum nodes agreeing about the data and since
GetObject only requires N/2 (Read quorum) and isDiskQuorum
would have returned true. This is problematic and can lead to
undersiable consequences.
Fixes#3298
Disks when are offline for a long period of time, we should
ignore the disk after trying Login upto 5 times.
This is to reduce the network chattiness, this also reduces
the overall time spent on `net.Dial`.
Fixes#3286
For binary releases and operating systems it would be
All operating systems.
```
┏━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┓
┃ Minio is 25 days 12 hours 30 minutes old ┃
┃ Update: https://dl.minio.io/server/minio/release/linux-amd64/minio ┃
┗━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┛
```
On docker.
```
┏━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┓
┃ Minio is 25 days 12 hours 32 minutes old ┃
┃ Update: docker pull minio/minio ┃
┗━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┛
```
In a situation when we have lots of buckets the bootup time
might have slowed down a bit but during this situation the
servers quickly going up and down would be an in-transit state.
Certain calls which do not use quorum like `readXLMetaStat`
might return an error saying `errDiskNotFound` this is returned
in place of expected `errFileNotFound` which leads to an issue
where server doesn't start.
To avoid this situation we need to ignore them as safe values
to be ignored, for the most part these are network related errors.
Fixes#3275
Also fix test to not use a bucket name with a leading slash - this
causes the bucket name to become empty and go to an unintended API
call (listbuckets).
This patch fixes a possible bug, reproduced rarely only seen
once.
```
panic: runtime error: index out of range
goroutine 136 [running]:
panic(0xac1a40, 0xc4200120b0)
/usr/local/go/src/runtime/panic.go:500 +0x1a1
github.com/minio/minio/vendor/github.com/minio/dsync.lock.func1(0xc4203d2240, 0x4, 0xc420474080, 0x4, 0x4, 0xc4202abb60, 0x0, 0xa86d01, 0xefcfc0, 0xc420417a80)
/go/src/github.com/minio/minio/vendor/github.com/minio/dsync/drwmutex.go:170 +0x69b
created by github.com/minio/minio/vendor/github.com/minio/dsync.lock
/go/src/github.com/minio/minio/vendor/github.com/minio/dsync/drwmutex.go:191 +0xf4
```
Ref #3229
After review with @abperiasamy we decided to remove all the unnecessary options
- MINIO_BROWSER (Implemented as a security feature but now deemed obsolete
since even if blocking access to MINIO_BROWSER, s3 API port is open)
- MINIO_CACHE_EXPIRY (Defaults to 72h)
- MINIO_MAXCONN (No one used this option and we don't test this)
- MINIO_ENABLE_FSMETA (Enable FSMETA all the time)
Remove --ignore-disks option - this option was implemented when XL layer
would initialize the backend disks and heal them automatically to disallow
XL accidentally using the root partition itself this option was introduced.
This behavior has been changed XL no longer automatically initializes
`format.json` a HEAL is controlled activity, so ignore-disks is not
useful anymore. This change also addresses the problems of our documentation
going forward and keeps things simple. This patch brings in reduction of
options and defaulting them to a valid known inputs. This patch also
serves as a guideline of limiting many ways to do the same thing.
rpcClient should attempt a reconnect if the call fails
with 'rpc.ErrShutdown' this is needed since at times when
the servers are taken down and brought back up.
The hijacked connection from net.Dial is usually closed.
So upon first attempt rpcClient might falsely indicate that
disk to be down, to avoid this state make another dial attempt
to really fail.
Fixes#3206Fixes#3205
- abstract out instrumentation information.
- use separate lockInstance type that encapsulates the nsMutex, volume,
path and opsID as the frontend or top-level lock object.
This is done by not making the methods of the BucketMetaState interface
as methods (via type nesting) on the type implementing
RPCs (s3PeerAPIHandlers).
- Adds an interface to update in-memory bucket metadata state called
BucketMetaState - this interface has functions to:
- update bucket notification configuration,
- bucket listener configuration,
- bucket policy configuration, and
- send bucket event
- This interface is implemented by `localBMS` a type for manipulating
local node in-memory bucket metadata, and by `remoteBMS` a type for
manipulating remote node in-memory bucket metadata.
- The remote node interface, makes an RPC call, but the local node
interface does not - it updates in-memory bucket state directly.
- Rename mkPeersFromEndpoints to makeS3Peers and refactored it.
- Use arrayslice instead of map in s3Peers struct
- `s3Peers.SendUpdate` now receives an arrayslice of peer indexes to
send the request to, with a special nil value slice indicating that
all peers should be sent the update.
- `s3Peers.SendUpdate` now returns an arrayslice of errors, representing
errors from peers when sending an update. The array positions
correspond to peer array s3Peers.peers
Improve globalS3Peers:
- Make isDistXL a global `globalIsDistXL` and remove from s3Peers
- Make globalS3Peers an array of (address, bucket-meta-state) pairs.
- Fix code and tests.
