Synchronous replication can be enabled by setting the --sync
flag while adding a remote replication target.
This PR also adds proxying on GET/HEAD to another node in a
active-active replication setup in the event of a 404 on the current node.
This PR refactors the way we use buffers for O_DIRECT and
to re-use those buffers for messagepack reader writer.
After some extensive benchmarking found that not all objects
have this benefit, and only objects smaller than 64KiB see
this benefit overall.
Benefits are seen from almost all objects from
1KiB - 32KiB
Beyond this no objects see benefit with bulk call approach
as the latency of bytes sent over the wire v/s streaming
content directly from disk negate each other with no
remarkable benefits.
All other optimizations include reuse of msgp.Reader,
msgp.Writer using sync.Pool's for all internode calls.
additionally also configure http2 healthcheck
values to quickly detect unstable connections
and let them timeout.
also use single transport for proxying requests
Due to botched upstream renames of project repositories
and incomplete migration to go.mod support, our current
dependency version of `go.mod` had bugs i.e it was
using commits from master branch which didn't have
the required fixes present in release-3.4 branches
which leads to some rare bugs
https://github.com/etcd-io/etcd/pull/11477 provides
a workaround for now and we should migrate to this.
release-3.5 eventually claims to fix all of this
properly until then we cannot use /v3 import right now
Instead of having less/more fields inside a structure depending on the
platform (non-linux/linux), it would be better to have the same standard
definition in all platforms, and certain fields of the structure to be
populated or left unpopulated depending on the platform.
Delete marker replication is implemented for V2
configuration specified in AWS spec (though AWS
allows it only in the V1 configuration).
This PR also brings in a MinIO only extension of
replicating permanent deletes, i.e. deletes specifying
version id are replicated to target cluster.
`decryptObjectInfo` is a significant bottleneck when listing objects.
Reduce the allocations for a significant speedup.
https://github.com/minio/sio/pull/40
```
λ benchcmp before.txt after.txt
benchmark old ns/op new ns/op delta
Benchmark_decryptObjectInfo-32 24260928 808656 -96.67%
benchmark old MB/s new MB/s speedup
Benchmark_decryptObjectInfo-32 0.04 1.24 31.00x
benchmark old allocs new allocs delta
Benchmark_decryptObjectInfo-32 75112 48996 -34.77%
benchmark old bytes new bytes delta
Benchmark_decryptObjectInfo-32 287694772 4228076 -98.53%
```
* add NVMe drive info [model num, serial num, drive temp. etc.]
* Ignore fuse partitions
* Add the nvme logic only for linux
* Move smart/nvme structs to a separate file
Co-authored-by: wlan0 <sidharthamn@gmail.com>
Always check if the auto-generated code is still compatible with the
existing written code to avoid a possible forgetting or sometimes a non
intentional change.
As the bulk/recursive delete will require multiple connections to open at an instance,
The default open connections limit will be reached which results in the following error
```FATAL: sorry, too many clients already```
By setting the open connections to a reasonable value - `2`, We ensure that the max open connections
will not be exhausted and lie under bounds.
The queries are simple inserts/updates/deletes which is operational and sufficient with the
the maximum open connection limit is 2.
Fixes#10553
Allow user configuration for MaxOpenConnections
- Add methods to set/remove replication rules (poornas)
- fix: only SSE-C headers should be applied to destination (Harshavardhana)
- fix: avoid data race by copying the buffer (Harshavardhana)
- remove deprecated build badges (Harshavardhana)
- fix: handle readFull bug with certain readers (Harshavardhana)
- fix a typo in README.md (Julien K)
- lifecycle: Fix marshaling expiration date/days (Anis Elleuch)
- add replication-status, expiration headers (Harshavardhana)
- Return object's version id in StatObject(Anis Elleuch)
- display appropriate funcName with nested callers (Harshavardhana)
- allow KMS tests to be run in the CI/CD (Harshavardhana)
- fix: removing lifecycle properly (Harshavardhana)
- feat: Add ListenNotification API to listen for all events (Harshavardhana)
This commit fixes a dependency resolution problem w.r.t. minio => etcd.
Building any project depending on minio (e.g. mc) currently fails with
latest master since the module replace directive is not honored for
transitive / indirect dependencies.
This commit fixes this by adding the etcd module directly instead of
using a module replace instruction.
with the merge of https://github.com/etcd-io/etcd/pull/11823
etcd v3.5.0 will now have a properly imported versioned path
this fixes our pending migration to newer repo
- additionally upgrade to msgp@v1.1.2
- change StatModTime,StatSize fields as
simple Size/ModTime
- reduce 50000 entries per List batch to 10000
as client needs to wait too long to see the
first batch some times which is not desired
and it is worth we write the data as soon
as we have it.
- Implement a new xl.json 2.0.0 format to support,
this moves the entire marshaling logic to POSIX
layer, top layer always consumes a common FileInfo
construct which simplifies the metadata reads.
- Implement list object versions
- Migrate to siphash from crchash for new deployments
for object placements.
Fixes#2111
At a customer setup with lots of concurrent calls
it can be observed that in newRetryTimer there
were lots of tiny alloations which are not
relinquished upon retries, in this codepath
we were only interested in re-using the timer
and use it wisely for each locker.
```
(pprof) top
Showing nodes accounting for 8.68TB, 97.02% of 8.95TB total
Dropped 1198 nodes (cum <= 0.04TB)
Showing top 10 nodes out of 79
flat flat% sum% cum cum%
5.95TB 66.50% 66.50% 5.95TB 66.50% time.NewTimer
1.16TB 13.02% 79.51% 1.16TB 13.02% github.com/ncw/directio.AlignedBlock
0.67TB 7.53% 87.04% 0.70TB 7.78% github.com/minio/minio/cmd.xlObjects.putObject
0.21TB 2.36% 89.40% 0.21TB 2.36% github.com/minio/minio/cmd.(*posix).Walk
0.19TB 2.08% 91.49% 0.27TB 2.99% os.statNolog
0.14TB 1.59% 93.08% 0.14TB 1.60% os.(*File).readdirnames
0.10TB 1.09% 94.17% 0.11TB 1.25% github.com/minio/minio/cmd.readDirN
0.10TB 1.07% 95.23% 0.10TB 1.07% syscall.ByteSliceFromString
0.09TB 1.03% 96.27% 0.09TB 1.03% strings.(*Builder).grow
0.07TB 0.75% 97.02% 0.07TB 0.75% path.(*lazybuf).append
```
size calculation in crawler was using the real size
of the object instead of its actual size i.e either
a decrypted or uncompressed size.
this is needed to make sure all other accounting
such as bucket quota and mcs UI to display the
correct values.
This PR adds a new configuration parameter which allows readiness
check to respond within 10secs, this can be reduced to a lower value
if necessary using
```
mc admin config set api ready_deadline=5s
```
or
```
export MINIO_API_READY_DEADLINE=5s
```
S3 is now natively supported by B2 cloud storage provider
there is no reason to use specialized gateway for B2 anymore,
our current S3 gateway with caching would work with B2.
Resolves#8584
By monitoring PUT/DELETE and heal operations it is possible
to track changed paths and keep a bloom filter for this data.
This can help prioritize paths to scan. The bloom filter can identify
paths that have not changed, and the few collisions will only result
in a marginal extra workload. This can be implemented on either a
bucket+(1 prefix level) with reasonable performance.
The bloom filter is set to have a false positive rate at 1% at 1M
entries. A bloom table of this size is about ~2500 bytes when serialized.
To not force a full scan of all paths that have changed cycle bloom
filters would need to be kept, so we guarantee that dirty paths have
been scanned within cycle runs. Until cycle bloom filters have been
collected all paths are considered dirty.
this commit avoids lots of tiny allocations, repeated
channel creates which are performed when filtering
the incoming events, unescaping a key just for matching.
also remove deprecated code which is not needed
anymore, avoids unexpected data structure transformations
from the map to slice.
OSS go sdk lacks licensing terms in their
repository, and there has been no activity
On the issue here https://github.com/aliyun/aliyun-oss-go-sdk/issues/245
This PR is to ensure we remove any dependency code which
lacks explicit license file in their repo.
Use the *credentials.Credentials implementation method *Get*
```
func (c *Credentials) Get() (Value, error) {
```
which also handles auto-refresh, this allows for chaining
of various implementations together if necessary or simply
initialize with credentials.NewStaticV4(access, secret, token)
Co-authored-by: Klaus Post <klauspost@gmail.com>
- B2 does actually return an MD5 hash for newly uploaded objects
so we can use it to provide better compatibility with S3 client
libraries that assume the ETag is the MD5 hash such as boto.
- depends on change in blazer library.
- new behaviour is only enabled if MinIO's --compat mode is active.
- behaviour for multipart uploads is unchanged (works fine as is).
- Implement a graph algorithm to test network bandwidth from every
node to every other node
- Saturate any network bandwidth adaptively, accounting for slow
and fast network capacity
- Implement parallel drive OBD tests
- Implement a paging mechanism for OBD test to provide periodic updates to client
- Implement Sys, Process, Host, Mem OBD Infos
- extract userTags from Get/Head request (#1249)
- fix: Context cancellation not handled (#1250)
- Check for correct http status in remove object tagging (#1248)
- simplify extracting metadata in Head/Get object (#1245)
- fix: close and remove .minio.part file on errors (#1243)
We had messy cyclical dependency problem with `mc`
due to dependencies in pkg/console, moved the pkg/console
to minio for more control and also to avoid any further
cyclical dependencies of `mc` clobbering up the
dependencies on server.
Fixes#8659
This commit removes github.com/minio/kes as
a dependency and implements the necessary
client-side functionality without relying
on the KES project.
This resolves the licensing issue since
KES is licensed under AGPL while MinIO
is licensed under Apache.
This commit adds support for the minio/kes KMS.
See: https://github.com/minio/kes
In particular you can configure it as KMS by:
- `export MINIO_KMS_KES_ENDPOINT=` // Server URL
- `export MINIO_KMS_KES_KEY_FILE=` // TLS client private key
- `export MINIO_KMS_KES_CERT_FILE=` // TLS client certificate
- `export MINIO_KMS_KES_CA_PATH=` // Root CAs issuing server cert
- `export MINIO_KMS_KES_KEY_NAME=` // The name of the (default)
master key
Harshavardhana
Klaus Post
Minio Trusted
Poorna Krishnamoorthy
Anis Elleuch
Shireesh Anjal
Praveen raj Mani
Gaige B Paulsen
Andreas Auernhammer
kannappanr
Krishna Srinivas
P R
Bala FA
Ingmar Runge
Sidhartha Mani
Stephen N
Zhongpeng Lin
ebozduman