throw proper error when port is not accessible
for the regular user, this is possibly a regression.
```
ERROR Unable to start the server: Insufficient permissions to use specified port
> Please ensure MinIO binary has 'cap_net_bind_service=+ep' permissions
HINT:
Use 'sudo setcap cap_net_bind_service=+ep /path/to/minio' to provide sufficient permissions
```
After #10594 let's invalidate the bloom filters to force the next cycles to go through all data.
There is a small chance that the linked PR could have caused missing bloom filter data.
This will invalidate the current bloom filters and make the crawler go through everything.
Routing using on source IP if found. This should distribute
the listing load for V1 and versioning on multiple nodes
evenly between different clients.
If source IP is not found from the http request header, then falls back
to bucket name instead.
Disallow versioning suspension on a bucket with
pre-existing replication configuration
If versioning is suspended on the target,replication
should fail.
`mc admin info` on busy setups will not move HDD
heads unnecessarily for repeated calls, provides
a better responsiveness for the call overall.
Bonus change allow listTolerancePerSet be N-1
for good entries, to avoid skipping entries
for some reason one of the disk went offline.
add a hint on the disk to allow for tracking fresh disk
being healed, to allow for restartable heals, and also
use this as a way to track and remove disks.
There are more pending changes where we should move
all the disk formatting logic to backend drives, this
PR doesn't deal with this refactor instead makes it
easier to track healing in the future.
- Add owner information for expiry, locking, unlocking a resource
- TopLocks returns now locks in quorum by default, provides
a way to capture stale locks as well with `?stale=true`
- Simplify the quorum handling for locks to avoid from storage
class, because there were challenges to make it consistent
across all situations.
- And other tiny simplifications to reset locks.
context canceled errors bubbling up from the network
layer has the potential to be misconstrued as network
errors, taking prematurely a server offline and triggering
a health check routine avoid this potential occurrence.
isEnded() was incorrectly calculating if the current healing sequence is
ended or not. h.currentStatus.Items could be empty if healing is very
slow and mc admin heal consumed all items.
As the bulk/recursive delete will require multiple connections to open at an instance,
The default open connections limit will be reached which results in the following error
```FATAL: sorry, too many clients already```
By setting the open connections to a reasonable value - `2`, We ensure that the max open connections
will not be exhausted and lie under bounds.
The queries are simple inserts/updates/deletes which is operational and sufficient with the
the maximum open connection limit is 2.
Fixes#10553
Allow user configuration for MaxOpenConnections
It is possible the heal drives are not reported from
the maintenance check because the background heal
state simply relied on the `format.json` for capturing
unformatted drives. It is possible that drives might
be still healing - make sure that applications which
rely on cluster health check respond back this detail.
Also, revamp the way ListBuckets work make few portions
of the healing logic parallel
- walk objects for healing disks in parallel
- collect the list of buckets in parallel across drives
- provide consistent view for listBuckets()
Healing was not working correctly in the distributed mode because
errFileVersionNotFound was not properly converted in storage rest
client.
Besides, fixing the healing delete marker is not working as expected.
performance improves by around 100x or more
```
go test -v -run NONE -bench BenchmarkGetPartFile
goos: linux
goarch: amd64
pkg: github.com/minio/minio/cmd
BenchmarkGetPartFileWithTrie
BenchmarkGetPartFileWithTrie-4 1000000000 0.140 ns/op 0 B/op 0 allocs/op
PASS
ok github.com/minio/minio/cmd 1.737s
```
fixes#10520
* Fix cases where minimum timeout > default timeout.
* Add defensive code for too small/negative timeouts.
* Never set timeout below the maximum value of a request.
* Protect against (unlikely) int64 wraps.
* Decrease timeout slower.
* Don't re-lock before copying.
This bug was introduced in 14f0047295
almost 3yrs ago, as a side affect of removing stale `fs.json`
but we in-fact end up removing existing good `fs.json` for an
existing object, leading to some form of a data loss.
fixes#10496
from 20s for 10000 parts to less than 1sec
Without the patch
```
~ time aws --endpoint-url=http://localhost:9000 --profile minio s3api \
list-parts --bucket testbucket --key test \
--upload-id c1cd1f50-ea9a-4824-881c-63b5de95315a
real 0m20.394s
user 0m0.589s
sys 0m0.174s
```
With the patch
```
~ time aws --endpoint-url=http://localhost:9000 --profile minio s3api \
list-parts --bucket testbucket --key test \
--upload-id c1cd1f50-ea9a-4824-881c-63b5de95315a
real 0m0.891s
user 0m0.624s
sys 0m0.182s
```
fixes#10503
It was observed in VMware vsphere environment during a
pod replacement, `mc admin info` might report incorrect
offline nodes for the replaced drive. This issue eventually
goes away but requires quite a lot of time for all servers
to be in sync.
This PR fixes this behavior properly.
If the ILM document requires removing noncurrent versions, the
the server should be able to remove 'null' versions as well.
'null' versions are created when versioning is not enabled
or suspended.
The entire encryption layer is dependent on the fact that
KMS should be configured for S3 encryption to work properly
and we only support passing the headers as is to the backend
for encryption only if KMS is configured.
Make sure that this predictability is maintained, currently
the code was allowing encryption to go through and fail
at later to indicate that KMS was not configured. We should
simply reply "NotImplemented" if KMS is not configured, this
allows clients to simply proceed with their tests.
This is to ensure that Go contexts work properly, after some
interesting experiments I found that Go net/http doesn't
cancel the context when Body is non-zero and hasn't been
read till EOF.
The following gist explains this, this can lead to pile up
of go-routines on the server which will never be canceled
and will die at a really later point in time, which can
simply overwhelm the server.
https://gist.github.com/harshavardhana/c51dcfd055780eaeb71db54f9c589150
To avoid this refactor the locking such that we take locks after we
have started reading from the body and only take locks when needed.
Also, remove contextReader as it's not useful, doesn't work as expected
context is not canceled until the body reaches EOF so there is no point
in wrapping it with context and putting a `select {` on it which
can unnecessarily increase the CPU overhead.
We will still use the context to cancel the lockers etc.
Additional simplification in the locker code to avoid timers
as re-using them is a complicated ordeal avoid them in
the hot path, since locking is very common this may avoid
lots of allocations.
configurable remote transport timeouts for some special cases
where this value needs to be bumped to a higher value when
transferring large data between federated instances.
In `(*cacheObjects).GetObjectNInfo` copy the metadata before spawning a goroutine.
Clean up a few map[string]string copies as well, reducing allocs and simplifying the code.
Fixes#10426
From https://docs.aws.amazon.com/AmazonS3/latest/dev/intro-lifecycle-rules.html#intro-lifecycle-rules-actions
```
When specifying the number of days in the NoncurrentVersionTransition
and NoncurrentVersionExpiration actions in a Lifecycle configuration,
note the following:
It is the number of days from when the version of the object becomes
noncurrent (that is, when the object is overwritten or deleted), that
Amazon S3 will perform the action on the specified object or objects.
Amazon S3 calculates the time by adding the number of days specified in
the rule to the time when the new successor version of the object is
created and rounding the resulting time to the next day midnight UTC.
For example, in your bucket, suppose that you have a current version of
an object that was created at 1/1/2014 10:30 AM UTC. If the new version
of the object that replaces the current version is created at 1/15/2014
10:30 AM UTC, and you specify 3 days in a transition rule, the
transition date of the object is calculated as 1/19/2014 00:00 UTC.
```
This PR adds a DNS target that ensures to update an entry
into Kubernetes operator when a bucket is created or deleted.
See minio/operator#264 for details.
Co-authored-by: Harshavardhana <harsha@minio.io>
MaxConnsPerHost can potentially hang a call without any
way to timeout, we do not need this setting for our proxy
and gateway implementations instead IdleConn settings are
good enough.
Also ensure to use NewRequestWithContext and make sure to
take the disks offline only for network errors.
Fixes#10304
inconsistent drive healing when one of the drive is offline
while a new drive was replaced, this change is to ensure
that we can add the offline drive back into the mix by
healing it again.
Add context to all (non-trivial) calls to the storage layer.
Contexts are propagated through the REST client.
- `context.TODO()` is left in place for the places where it needs to be added to the caller.
- `endWalkCh` could probably be removed from the walkers, but no changes so far.
The "dangerous" part is that now a caller disconnecting *will* propagate down, so a
"delete" operation will now be interrupted. In some cases we might want to disconnect
this functionality so the operation completes if it has started, leaving the system in a cleaner state.
This commit refactors the certificate management implementation
in the `certs` package such that multiple certificates can be
specified at the same time. Therefore, the following layout of
the `certs/` directory is expected:
```
certs/
│
├─ public.crt
├─ private.key
├─ CAs/ // CAs directory is ignored
│ │
│ ...
│
├─ example.com/
│ │
│ ├─ public.crt
│ └─ private.key
└─ foobar.org/
│
├─ public.crt
└─ private.key
...
```
However, directory names like `example.com` are just for human
readability/organization and don't have any meaning w.r.t whether
a particular certificate is served or not. This decision is made based
on the SNI sent by the client and the SAN of the certificate.
***
The `Manager` will pick a certificate based on the client trying
to establish a TLS connection. In particular, it looks at the client
hello (i.e. SNI) to determine which host the client tries to access.
If the manager can find a certificate that matches the SNI it
returns this certificate to the client.
However, the client may choose to not send an SNI or tries to access
a server directly via IP (`https://<ip>:<port>`). In this case, we
cannot use the SNI to determine which certificate to serve. However,
we also should not pick "the first" certificate that would be accepted
by the client (based on crypto. parameters - like a signature algorithm)
because it may be an internal certificate that contains internal hostnames.
We would disclose internal infrastructure details doing so.
Therefore, the `Manager` returns the "default" certificate when the
client does not specify an SNI. The default certificate the top-level
`public.crt` - i.e. `certs/public.crt`.
This approach has some consequences:
- It's the operator's responsibility to ensure that the top-level
`public.crt` does not disclose any information (i.e. hostnames)
that are not publicly visible. However, this was the case in the
past already.
- Any other `public.crt` - except for the top-level one - must not
contain any IP SAN. The reason for this restriction is that the
Manager cannot match a SNI to an IP b/c the SNI is the server host
name. The entire purpose of SNI is to indicate which host the client
tries to connect to when multiple hosts run on the same IP. So, a
client will not set the SNI to an IP.
If we would allow IP SANs in a lower-level `public.crt` a user would
expect that it is possible to connect to MinIO directly via IP address
and that the MinIO server would pick "the right" certificate. However,
the MinIO server cannot determine which certificate to serve, and
therefore always picks the "default" one. This may lead to all sorts
of confusing errors like:
"It works if I use `https:instance.minio.local` but not when I use
`https://10.0.2.1`.
These consequences/limitations should be pointed out / explained in our
docs in an appropriate way. However, the support for multiple
certificates should not have any impact on how deployment with a single
certificate function today.
Co-authored-by: Harshavardhana <harsha@minio.io>
- do not fail the healthcheck if heal status
was not obtained from one of the nodes,
if many nodes fail then report this as a
catastrophic error.
- add "x-minio-write-quorum" value to match
the write tolerance supported by server.
- admin info now states if a drive is healing
where madmin.Disk.Healing is set to true
and madmin.Disk.State is "ok"
Currently, cache purges are triggered as soon as the low watermark is exceeded.
To reduce IO this should only be done when reaching the high watermark.
This simplifies checks and reduces all calls for a GC to go through
`dcache.diskSpaceAvailable(size)`. While a comment claims that
`dcache.triggerGC <- struct{}{}` was non-blocking I don't see how
that was possible. Instead, we add a 1 size to the queue channel
and use channel semantics to avoid blocking when a GC has
already been requested.
`bytesToClear` now takes the high watermark into account to it will
not request any bytes to be cleared until that is reached.
This commit reduces the retry delay when retrying a request
to a KES server by:
- reducing the max. jitter delay from 3s to 1.5s
- skipping the random delay when there are more KES endpoints
available.
If there are more KES endpoints we can directly retry to the request
by sending it to the next endpoint - as pointed out by @krishnasrinivas
- delete-marker should be created on a suspended bucket as `null`
- delete-marker should delete any pre-existing `null` versioned
object and create an entry `null`
When checking parts we already do a stat for each part.
Since we have the on disk size check if it is at least what we expect.
When checking metadata check if metadata is 0 bytes.
The `getNonLoopBackIP` may grab an IP from an interface that
doesn't allow binding (on Windows), so this test consistently fails.
We exclude that specific error.
* readDirN: Check if file is directory
`syscall.FindNextFile` crashes if the handle is a file.
`errFileNotFound` matches 'unix' functionality: d19b434ffc/cmd/os-readdir_unix.go (L106)Fixes#10384
This commit addresses a maintenance / automation problem when MinIO-KES
is deployed on bare-metal. In orchestrated env. the orchestrator (K8S)
will make sure that `n` KES servers (IPs) are available via the same DNS
name. There it is sufficient to provide just one endpoint.
ListObjectsV1 requests are actually redirected to a specific node,
depending on the bucket name. The purpose of this behavior was
to optimize listing.
However, the current code sends a Bad Gateway error if the
target node is offline, which is a bad behavior because it means
that the list request will fail, although this is unnecessary since
we can still use the current node to list as well (the default behavior
without using proxying optimization)
Currently, you can see mint fails when there is one offline node, after
this PR, mint will always succeed.
We can reduce this further in the future, but this is a good
value to keep around. With the advent of continuous healing,
we can be assured that namespace will eventually be
consistent so we are okay to avoid the necessity to
a list across all drives on all sets.
Bonus Pop()'s in parallel seem to have the potential to
wait too on large drive setups and cause more slowness
instead of gaining any performance remove it for now.
Also, implement load balanced reply for local disks,
ensuring that local disks have an affinity for
- cleanupStaleMultipartUploads()
If DiskInfo calls failed the information returned was used anyway
resulting in no endpoint being set.
This would make the drive be attributed to the local system since
`disk.Endpoint == disk.DrivePath` in that case.
Instead, if the call fails record the endpoint and the error only.
bonus make sure to ignore objectNotFound, and versionNotFound
errors properly at all layers, since HealObjects() returns
objectNotFound error if the bucket or prefix is empty.
When crawling never use a disk we know is healing.
Most of the change involves keeping track of the original endpoint on xlStorage
and this also fixes DiskInfo.Endpoint never being populated.
Heal master will print `data-crawl: Disk "http://localhost:9001/data/mindev/data2/xl1" is
Healing, skipping` once on a cycle (no more often than every 5m).
We should only enforce quotas if no error has been returned.
firstErr is safe to access since all goroutines have exited at this point.
If `firstErr` hasn't been set by something else return the context error if cancelled.
Keep dataUpdateTracker while goroutine is starting.
This will ensure the object is updated one `start` returns
Tested with
```
λ go test -cpu=1,2,4,8 -test.run TestDataUpdateTracker -count=1000
PASS
ok github.com/minio/minio/cmd 8.913s
```
Fixes#10295
fresh drive setups when one of the drive is
a root drive, we should ignore such a root
drive and not proceed to format.
This PR handles this properly by marking
the disks which are root disk and they are
taken offline.
newDynamicTimeout should be allocated once, in-case
of temporary locks in config and IAM we should
have allocated timeout once before the `for loop`
This PR doesn't fix any issue as such, but provides
enough dynamism for the timeout as per expectation.
Krishna Srinivas
Harshavardhana
Anis Elleuch
Klaus Post
Ritesh H Shukla
Poorna Krishnamoorthy
Lenin Alevski
飞雪无情
Praveen raj Mani
Nitish Tiwari
Andreas Auernhammer
Gaige B Paulsen
Jorge Israel Peña
Daniel Valdivia
kannappanr
ebozduman
KevinSmile