Ensure delete marker replication success, especially since the
recent optimizations to heal on HEAD, LIST and GET can force
replication attempts on delete marker before underlying object
version could have synced.
PUT shall only proceed if pre-conditions are met, the new
code uses
- x-minio-source-mtime
- x-minio-source-etag
to verify if the object indeed needs to be replicated
or not, allowing us to avoid StatObject() call.
If replication config could not be read from bucket metadata for some
reason, issue a panic so that unexpected replication outcomes can
be avoided for replicated buckets.
For similar reasons, adding a panic while fetching object-lock config
if it failed for reason other than non-existence of config.
to avoid relying on scanner-calculated replication metrics.
This will improve the accuracy of the replication stats reported.
This PR also adds on to #15556 by handing replication
traffic that could not be queued by available workers to the
MRF queue so that entries in `PENDING` status are healed faster.
Currently, there is a short time window where the code is allowed
to save the status of a replication resync. Currently, the window is
`now.Sub(st.EndTime) <= resyncTimeInterval`. Also, any failure to
write in the backend disks is not retried.
Refactor the code a little bit to rely on the last timestamp of a
successful write of the resync status of any given bucket in the
backend disks.
When replication is enabled in a particular bucket, the listing will send
objects to bucket replication, but it is also sending prefixes for non
recursive listing which is useless and shows a lot of error logs.
This commit will ignore prefixes.
This PR improves the replication failure healing by persisting
most recent failures to disk and re-queuing them until the replication
is successful.
While this does not eliminate the need for healing during a full scan,
queuing MRF vastly improves the ETA to keeping replicated buckets
in sync as it does not wait for the scanner visit to detect unreplicated
object versions.
competing calls on the same object on versioned bucket
mutating calls on the same object may unexpected have
higher delays.
This can be reproduced with a replicated bucket
overwriting the same object writes, deletes repeatedly.
For longer locks like scanner keep the 1sec interval
This PR fixes possible leaks that may emanate from not
listening on context cancelation or timeouts.
```
goroutine 60957610 [chan send, 16 minutes]:
github.com/minio/minio/cmd.(*erasureServerPools).Walk.func1.1.1(...)
github.com/minio/minio/cmd/erasure-server-pool.go:1724 +0x368
github.com/minio/minio/cmd.listPathRaw({0x4a9a740, 0xc0666dffc0},...
github.com/minio/minio/cmd/metacache-set.go:1022 +0xfc4
github.com/minio/minio/cmd.(*erasureServerPools).Walk.func1.1()
github.com/minio/minio/cmd/erasure-server-pool.go:1764 +0x528
created by github.com/minio/minio/cmd.(*erasureServerPools).Walk.func1
github.com/minio/minio/cmd/erasure-server-pool.go:1697 +0x1b7
```
Queue failed/pending replication for healing during listing and GET/HEAD
API calls. This includes healing of existing objects that were never
replicated or those in the middle of a resync operation.
This PR also fixes a bug in ListObjectVersions where lifecycle filtering
should be done.
fixes#15334
- re-use net/url parsed value for http.Request{}
- remove gosimple, structcheck and unusued due to https://github.com/golangci/golangci-lint/issues/2649
- unwrapErrs upto leafErr to ensure that we store exactly the correct errors
Rename Trigger -> Event to be a more appropriate
name for the audit event.
Bonus: fixes a bug in AddMRFWorker() it did not
cancel the waitgroup, leading to waitgroup leaks.
PR #15041 fixed replicating 'null' version however
due to a regression from #14994 caused the target
versions for these 'null' versioned objects to have
different 'versions', this may cause confusion with
bi-directional replication and cause double replication.
This PR fixes this properly by making sure we replicate
the correct versions on the objects.
We need to make sure if we cannot read bucket metadata
for some reason, and bucket metadata is not missing and
returning corrupted information we should panic such
handlers to disallow I/O to protect the overall state
on the system.
In-case of such corruption we have a mechanism now
to force recreate the metadata on the bucket, using
`x-minio-force-create` header with `PUT /bucket` API
call.
Additionally fix the versioning config updated state
to be set properly for the site replication healing
to trigger correctly.
Main motivation is move towards a common backend format
for all different types of modes in MinIO, allowing for
a simpler code and predictable behavior across all features.
This PR also brings features such as versioning, replication,
transitioning to single drive setups.
current implementation relied on recursively calling one bucket
at a time across all peers, this would be very slow and chatty
when there are 100's of buckets which would mean 100*peerCount
amount of network operations.
This PR attempts to reduce this entire call into `peerCount`
amount of network calls only. This functionality addresses also a
concern where the Prometheus metrics would significantly slow
down when one of the peers is offline.
it seems in some places we have been wrongly using the
timer.Reset() function, nicely exposed by an example
shared by @donatello https://go.dev/play/p/qoF71_D1oXD
this PR fixes all the usage comprehensively
- do not need to restrict prefix exclusions that do not
have `/` as suffix, relax this requirement as spark may
have staging folders with other autogenerated characters
, so we are better off doing full prefix March and skip.
- multiple delete objects was incorrectly creating a
null delete marker on a versioned bucket instead of
creating a proper versioned delete marker.
- do not suspend paths on the excluded prefixes during
delete operations to avoid creating `null` delete markers,
honor suspension of versioning only at bucket level for
delete markers.
Spark/Hadoop workloads which use Hadoop MR
Committer v1/v2 algorithm upload objects to a
temporary prefix in a bucket. These objects are
'renamed' to a different prefix on Job commit.
Object storage admins are forced to configure
separate ILM policies to expire these objects
and their versions to reclaim space.
Our solution:
This can be avoided by simply marking objects
under these prefixes to be excluded from versioning,
as shown below. Consequently, these objects are
excluded from replication, and don't require ILM
policies to prune unnecessary versions.
- MinIO Extension to Bucket Version Configuration
```xml
<VersioningConfiguration xmlns="http://s3.amazonaws.com/doc/2006-03-01/">
<Status>Enabled</Status>
<ExcludeFolders>true</ExcludeFolders>
<ExcludedPrefixes>
<Prefix>app1-jobs/*/_temporary/</Prefix>
</ExcludedPrefixes>
<ExcludedPrefixes>
<Prefix>app2-jobs/*/__magic/</Prefix>
</ExcludedPrefixes>
<!-- .. up to 10 prefixes in all -->
</VersioningConfiguration>
```
Note: `ExcludeFolders` excludes all folders in a bucket
from versioning. This is required to prevent the parent
folders from accumulating delete markers, especially
those which are shared across spark workloads
spanning projects/teams.
- To enable version exclusion on a list of prefixes
```
mc version enable --excluded-prefixes "app1-jobs/*/_temporary/,app2-jobs/*/_magic," --exclude-prefix-marker myminio/test
```
heal bucket metadata and IAM entries for
sites participating in site replication from
the site with the most updated entry.
Co-authored-by: Harshavardhana <harsha@minio.io>
Co-authored-by: Aditya Manthramurthy <aditya@minio.io>
- GetObject() with vid should return 405
- GetObject() without vid should return 404
- ListObjects() should ignore this object if this is the "latest" version of the object
- ListObjectVersions() should list this object as "DELETE marker"
- Remove data parts before sync'ing the version pending purge
When the replication rule is based on tag matches, the replication process
should pick up targets matching the tags specified in the replication
rule.
Fixing regression due to #12880
Currently tag removal leaves replication state as `PENDING`
because the `HEAD` api returns just a tag count but not the
actual tags, and this is treated as a no-op
- r.ulock was not locked when r.UsageCache was being modified
Bonus:
- simplify code by removing some unnecessary clone methods - we can
do this because go arrays are values (not pointers/references) that are
automatically copied on assignment.
- remove some unnecessary map allocation calls
A corner case can occur where the delete-marker was propagated
but the metadata could not be updated on the primary. Sending
a RemoveObject call with the Delete marker version would end
up permanently deleting the version on target. Instead, perform
a Stat on the delete-marker version on target and redo replication
only if the delete-marker is missing on target.
currently getReplicationConfig() failure incorrectly
returns error on unexpected buckets upon upgrade, we
should always calculate usage as much as possible.
Existing:
```go
type xlMetaV2 struct {
Versions []xlMetaV2Version `json:"Versions" msg:"Versions"`
}
```
Serialized as regular MessagePack.
```go
//msgp:tuple xlMetaV2VersionHeader
type xlMetaV2VersionHeader struct {
VersionID [16]byte
ModTime int64
Type VersionType
Flags xlFlags
}
```
Serialize as streaming MessagePack, format:
```
int(headerVersion)
int(xlmetaVersion)
int(nVersions)
for each version {
binary blob, xlMetaV2VersionHeader, serialized
binary blob, xlMetaV2Version, serialized.
}
```
xlMetaV2VersionHeader is <= 30 bytes serialized. Deserialized struct
can easily be reused and does not contain pointers, so efficient as a
slice (single allocation)
This allows quickly parsing everything as slices of bytes (no copy).
Versions are always *saved* sorted by modTime, newest *first*.
No more need to sort on load.
* Allows checking if a version exists.
* Allows reading single version without unmarshal all.
* Allows reading latest version of type without unmarshal all.
* Allows reading latest version without unmarshal of all.
* Allows checking if the latest is deleteMarker by reading first entry.
* Allows adding/updating/deleting a version with only header deserialization.
* Reduces allocations on conversion to FileInfo(s).
Add a new Prometheus metric for bucket replication latency
e.g.:
minio_bucket_replication_latency_ns{
bucket="testbucket",
operation="upload",
range="LESS_THAN_1_MiB",
server="127.0.0.1:9001",
targetArn="arn:minio:replication::45da043c-14f5-4da4-9316-aba5f77bf730:testbucket"} 2.2015663e+07
Co-authored-by: Klaus Post <klauspost@gmail.com>
- remove some duplicated code
- reported a bug, separately fixed in #13664
- using strings.ReplaceAll() when needed
- using filepath.ToSlash() use when needed
- remove all non-Go style comments from the codebase
Co-authored-by: Aditya Manthramurthy <donatello@users.noreply.github.com>
Removes RLock/RUnlock for updating metadata,
since we already take a write lock to update
metadata, this change removes reading of xl.meta
as well as an additional lock, the performance gain
should increase 3x theoretically for
- PutObjectRetention
- PutObjectLegalHold
This optimization is mainly for Veeam like
workloads that require a certain level of iops
from these API calls, we were losing iops.
Replication was not working properly for encrypted
objects in single PUT object for preserving etag,
We need to make sure to preserve etag such that replication
works properly and not gets into infinite loops of copying
due to ETag mismatches.
This will allow objects to relinquish read lock held during
replication earlier if the target is known to be down
without waiting for connection timeout when replication
is attempted.
its possible that some multipart uploads would have
uploaded only single parts so relying on `len(o.Parts)`
alone is not sufficient, we need to look for ETag
pattern to be absolutely sure.
In case of replication healing, we always store completed status in the
object metadata, which is wrong because replication could fail in the
further retries.
auditLog should be attempted right before the
return of the function and not multiple times
per function, this ensures that we only trigger
it once per function call.
if object was uploaded with multipart. This is to ensure that
GetObject calls with partNumber in URI request parameters
have same behavior on source and replication target.
This feature also changes the default port where
the browser is running, now the port has moved
to 9001 and it can be configured with
```
--console-address ":9001"
```
Also adding an API to allow resyncing replication when
existing object replication is enabled and the remote target
is entirely lost. With the `mc replicate reset` command, the
objects that are eligible for replication as per the replication
config will be resynced to target if existing object replication
is enabled on the rule.
This is to ensure that there are no projects
that try to import `minio/minio/pkg` into
their own repo. Any such common packages should
go to `https://github.com/minio/pkg`
when bidirectional replication is set up.
If ReplicaModifications is enabled in the replication
configuration, sync metadata updates to source if
replication rules are met. By default, if this
configuration is unset, MinIO automatically sync's
metadata updates on replica back to the source.
failed queue should be used for retried requests to
avoid cascading the failures into incoming queue, this
would allow for a more fair retry for failed replicas.
Additionally also avoid taking context in queue task
to avoid confusion, simplifies its usage.
