Allow requests to come in for users as soon as object
layer and config are initialized, this allows users
to be authenticated sooner and would succeed automatically
on servers which are yet to fully initialize.
This PR fixes a hang which occurs quite commonly at higher concurrency
by allowing following changes
- allowing lower connections in time_wait allows faster socket open's
- lower idle connection timeout to ensure that we let kernel
reclaim the time_wait connections quickly
- increase somaxconn to 4096 instead of 2048 to allow larger tcp
syn backlogs.
fixes#10413
In almost all scenarios MinIO now is
mostly ready for all sub-systems
independently, safe-mode is not useful
anymore and do not serve its original
intended purpose.
allow server to be fully functional
even with config partially configured,
this is to cater for availability of actual
I/O v/s manually fixing the server.
In k8s like environments it will never make
sense to take pod into safe-mode state,
because there is no real access to perform
any remote operation on them.
* Fix cases where minimum timeout > default timeout.
* Add defensive code for too small/negative timeouts.
* Never set timeout below the maximum value of a request.
* Protect against (unlikely) int64 wraps.
* Decrease timeout slower.
* Don't re-lock before copying.
newDynamicTimeout should be allocated once, in-case
of temporary locks in config and IAM we should
have allocated timeout once before the `for loop`
This PR doesn't fix any issue as such, but provides
enough dynamism for the timeout as per expectation.
Bonus also fix a bug where we did not purge relevant
service accounts generated by rotating credentials
appropriately, service accounts should become invalid
as soon as its corresponding parent user becomes invalid.
Since service account themselves carry parent claim always
we would never reach this problem, as the access get
rejected at IAM policy layer.
Context timeout might race on each other when timeouts are lower
i.e when two lock attempts happened very quickly on the same resource
and the servers were yet trying to establish quorum.
This situation can lead to locks held which wouldn't be unlocked
and subsequent lock attempts would fail.
This would require a complete server restart. A potential of this
issue happening is when server is booting up and we are trying
to hold a 'transaction.lock' in quick bursts of timeout.
not all claims need to be present for
the JWT claim, let the policies not
exist and only apply which are present
when generating the credentials
once credentials are generated then
those policies should exist, otherwise
the request will fail.
- Implement a new xl.json 2.0.0 format to support,
this moves the entire marshaling logic to POSIX
layer, top layer always consumes a common FileInfo
construct which simplifies the metadata reads.
- Implement list object versions
- Migrate to siphash from crchash for new deployments
for object placements.
Fixes#2111
Groups information shall be now stored as part of the
credential data structure, this is a more idiomatic
way to support large LDAP groups.
Avoids the complication of setups where LDAP groups
can be in the range of 150+ which may lead to excess
HTTP header size > 8KiB, to reduce such an occurrence
we shall save the group information on the server as
part of the credential data structure.
Bonus change support multiple mapped policies, across
all types of users.
allow generating service accounts for temporary credentials
which have a designated parent, currently OpenID is not yet
supported.
added checks to ensure that service account cannot generate
further service accounts for itself, service accounts can
never be a parent to any credential.
This PR also fixes issues when
deletePolicy, deleteUser is idempotent so can lead to
issues when client can prematurely timeout, so a retry
call error response should be ignored when call returns
http.StatusNotFound
Fixes#9347
This PR fixes couple of behaviors with service accounts
- not need to have session token for service accounts
- service accounts can be generated by any user for themselves
implicitly, with a valid signature.
- policy input for AddNewServiceAccount API is not fully typed
allowing for validation before it is sent to the server.
- also bring in additional context for admin API errors if any
when replying back to client.
- deprecate GetServiceAccount API as we do not need to reply
back session tokens
Fixes#8667
In addition to the above, if the user is mapped to a policy or
belongs in a group, the user-info API returns this information,
but otherwise, the API will now return a non-existent user error.
Change distributed locking to allow taking bulk locks
across objects, reduces usually 1000 calls to 1.
Also allows for situations where multiple clients sends
delete requests to objects with following names
```
{1,2,3,4,5}
```
```
{5,4,3,2,1}
```
will block and ensure that we do not fail the request
on each other.
In certain organizations policy claim names
can be not just 'policy' but also things like
'roles', the value of this field might also
be *string* or *[]string* support this as well
In this PR we are still not supporting multiple
policies per STS account which will require a
more comprehensive change.
This PR fixes the issue where we might allow policy changes
for temporary credentials out of band, this situation allows
privilege escalation for those temporary credentials. We
should disallow any external actions on temporary creds
as a practice and we should clearly differentiate which
are static and which are temporary credentials.
Refer #8667
In replica sets, hosts resolve to localhost
IP automatically until the deployment fully
comes up. To avoid this issue we need to
wait for such resolution.
- Migrate and save only settings which are enabled
- Rename logger_http to logger_webhook and
logger_http_audit to audit_webhook
- No more pretty printing comments, comment
is a key=value pair now.
- Avoid quotes on values which do not have space in them
- `state="on"` is implicit for all SetConfigKV unless
specified explicitly as `state="off"`
- Disabled IAM users should be disabled always
This PR implements locking from a global entity into
a more localized set level entity, allowing for locks
to be held only on the resources which are writing
to a collection of disks rather than a global level.
In this process this PR also removes the top-level
limit of 32 nodes to an unlimited number of nodes. This
is a precursor change before bring in bucket expansion.
This PR also fixes issues related to
- Add proper newline for `mc admin config get` output
for more than one targets
- Fixes issue of temporary user credentials to have
consistent output
- Fixes a crash when setting a key with empty values
- Fixes a parsing issue with `mc admin config history`
- Fixes gateway ENV handling for etcd server and gateway
This PR refactors object layer handling such
that upon failure in sub-system initialization
server reaches a stage of safe-mode operation
wherein only certain API operations are enabled
and available.
This allows for fixing many scenarios such as
- incorrect configuration in vault, etcd,
notification targets
- missing files, incomplete config migrations
unable to read encrypted content etc
- any other issues related to notification,
policies, lifecycle etc
- This PR allows config KVS to be validated properly
without being affected by ENV overrides, rejects
invalid values during set operation
- Expands unit tests and refactors the error handling
for notification targets, returns error instead of
ignoring targets for invalid KVS
- Does all the prep-work for implementing safe-mode
style operation for MinIO server, introduces a new
global variable to toggle safe mode based operations
NOTE: this PR itself doesn't provide safe mode operations
- adding oauth support to MinIO browser (#8400) by @kanagaraj
- supports multi-line get/set/del for all config fields
- add support for comments, allow toggle
- add extensive validation of config before saving
- support MinIO browser to support proper claims, using STS tokens
- env support for all config parameters, legacy envs are also
supported with all documentation now pointing to latest ENVs
- preserve accessKey/secretKey from FS mode setups
- add history support implements three APIs
- ClearHistory
- RestoreHistory
- ListHistory
- add help command support for each config parameters
- all the bug fixes after migration to KV, and other bug
fixes encountered during testing.
- Heal if the part.1 is truncated from its original size
- Heal if the part.1 fails while being verified in between
- Heal if the part.1 fails while being at a certain offset
Other cleanups include make sure to flush the HTTP responses
properly from storage-rest-server, avoid using 'defer' to
improve call latency. 'defer' incurs latency avoid them
in our hot-paths such as storage-rest handlers.
Fixes#8319
Add LDAP based users-groups system
This change adds support to integrate an LDAP server for user
authentication. This works via a custom STS API for LDAP. Each user
accessing the MinIO who can be authenticated via LDAP receives
temporary credentials to access the MinIO server.
LDAP is enabled only over TLS.
User groups are also supported via LDAP. The administrator may
configure an LDAP search query to find the group attribute of a user -
this may correspond to any attribute in the LDAP tree (that the user
has access to view). One or more groups may be returned by such a
query.
A group is mapped to an IAM policy in the usual way, and the server
enforces a policy corresponding to all the groups and the user's own
mapped policy.
When LDAP is configured, the internal MinIO users system is disabled.
Add API to set policy mapping for a user or group
Contains a breaking Admin APIs change.
- Also enforce all applicable policies
- Removes the previous /set-user-policy API
Bump up peerRESTVersion
Add get user info API to show groups of a user
This change adds admin APIs and IAM subsystem APIs to:
- add or remove members to a group (group addition and deletion is
implicit on add and remove)
- enable/disable a group
- list and fetch group info
- Policy mapping is now at `config/iam/policydb/users/myuser1.json`
and includes version.
- User identity file is now versioned.
- Migrate old data to the new format.
This PR adds support for adding session policies
for further restrictions on STS credentials, useful
in situations when applications want to generate
creds for multiple interested parties with different
set of policy restrictions.
This session policy is not mandatory, but optional.
Fixes#7732
Currently we used to reload users every five minutes,
regardless of etcd is configured or not. But with etcd
configured we can do this more asynchronously to trigger
a refresh by using the watch API
Fixes#7515
This PR adds pass-through, single encryption at gateway and double
encryption support (gateway encryption with pass through of SSE
headers to backend).
If KMS is set up (either with Vault as KMS or using
MINIO_SSE_MASTER_KEY),gateway will automatically perform
single encryption. If MINIO_GATEWAY_SSE is set up in addition to
Vault KMS, double encryption is performed.When neither KMS nor
MINIO_GATEWAY_SSE is set, do a pass through to backend.
When double encryption is specified, MINIO_GATEWAY_SSE can be set to
"C" for SSE-C encryption at gateway and backend, "S3" for SSE-S3
encryption at gateway/backend or both to support more than one option.
Fixes#6323, #6696
This PR introduces two new features
- AWS STS compatible STS API named AssumeRoleWithClientGrants
```
POST /?Action=AssumeRoleWithClientGrants&Token=<jwt>
```
This API endpoint returns temporary access credentials, access
tokens signature types supported by this API
- RSA keys
- ECDSA keys
Fetches the required public key from the JWKS endpoints, provides
them as rsa or ecdsa public keys.
- External policy engine support, in this case OPA policy engine
- Credentials are stored on disks
Poorna Krishnamoorthy
Harshavardhana
Klaus Post
Anis Elleuch
Anton Huck
Aditya Manthramurthy
César Nieto
kannappanr
Kanagaraj M