- do not need to restrict prefix exclusions that do not
have `/` as suffix, relax this requirement as spark may
have staging folders with other autogenerated characters
, so we are better off doing full prefix March and skip.
- multiple delete objects was incorrectly creating a
null delete marker on a versioned bucket instead of
creating a proper versioned delete marker.
- do not suspend paths on the excluded prefixes during
delete operations to avoid creating `null` delete markers,
honor suspension of versioning only at bucket level for
delete markers.
PR #14828 introduced prefix-level exclusion of versioning
and replication - however our site replication implementation
since it defaults versioning on all buckets did not allow
changing versioning configuration once the bucket was created.
This PR changes this and ensures that such changes are honored
and also propagated/healed across sites appropriately.
Spark/Hadoop workloads which use Hadoop MR
Committer v1/v2 algorithm upload objects to a
temporary prefix in a bucket. These objects are
'renamed' to a different prefix on Job commit.
Object storage admins are forced to configure
separate ILM policies to expire these objects
and their versions to reclaim space.
Our solution:
This can be avoided by simply marking objects
under these prefixes to be excluded from versioning,
as shown below. Consequently, these objects are
excluded from replication, and don't require ILM
policies to prune unnecessary versions.
- MinIO Extension to Bucket Version Configuration
```xml
<VersioningConfiguration xmlns="http://s3.amazonaws.com/doc/2006-03-01/">
<Status>Enabled</Status>
<ExcludeFolders>true</ExcludeFolders>
<ExcludedPrefixes>
<Prefix>app1-jobs/*/_temporary/</Prefix>
</ExcludedPrefixes>
<ExcludedPrefixes>
<Prefix>app2-jobs/*/__magic/</Prefix>
</ExcludedPrefixes>
<!-- .. up to 10 prefixes in all -->
</VersioningConfiguration>
```
Note: `ExcludeFolders` excludes all folders in a bucket
from versioning. This is required to prevent the parent
folders from accumulating delete markers, especially
those which are shared across spark workloads
spanning projects/teams.
- To enable version exclusion on a list of prefixes
```
mc version enable --excluded-prefixes "app1-jobs/*/_temporary/,app2-jobs/*/_magic," --exclude-prefix-marker myminio/test
```
when the site is being removed is missing replication config. This can
happen when a new deployment is brought in place of a site that
is lost/destroyed and needs to delink old deployment from site
replication.
console logging peer API was broken as it would
timeout after 15minutes, this never really worked
beyond this value and basically failed to provide
the streaming "log" functionality that was expected
from this implementation.
also fix convoluted channel handling by keeping things
simple, this is rewritten.
do not modify opts.UserDefined after object-handler
has set all the necessary values, any mutation needed
should be done on a copy of this value not directly.
As there are other pieces of code that access opts.UserDefined
concurrently this becomes challenging.
fixes#14856
When a decommission task is successfully completed, failed, or canceled,
this commit allows restarting the decommission again. Restarting is not
allowed when there is an ongoing decommission task.
this PR introduces a few changes such as
- sessionPolicyName is not reused in an extracted manner
to apply policies for incoming authenticated calls,
instead uses a different key to designate this
information for the callers.
- this differentiation is needed to ensure that service
account updates do not accidentally store JSON representation
instead of base64 equivalent on the disk.
- relax requirements for Deleting a service account, allow
deleting a service account that might be unreadable, i.e
a situation where the user might have removed session policy
which now carries a JSON representation, making it unparsable.
- introduce some constants to reuse instead of strings.
fixes#14784
If an invalid status code is generated from an error we risk panicking. Even if there
are no potential problems at the moment we should prevent this in the future.
Add safeguards against this.
Sample trace:
```
May 02 06:41:39 minio[52806]: panic: "GET /20180401230655.PDF": invalid WriteHeader code 0
May 02 06:41:39 minio[52806]: goroutine 16040430822 [running]:
May 02 06:41:39 minio[52806]: runtime/debug.Stack(0xc01fff7c20, 0x25c4b00, 0xc0490e4080)
May 02 06:41:39 minio[52806]: runtime/debug/stack.go:24 +0x9f
May 02 06:41:39 minio[52806]: github.com/minio/minio/cmd.setCriticalErrorHandler.func1.1(0xc022048800, 0x4f38ab0, 0xc0406e0fc0)
May 02 06:41:39 minio[52806]: github.com/minio/minio/cmd/generic-handlers.go:469 +0x85
May 02 06:41:39 minio[52806]: panic(0x25c4b00, 0xc0490e4080)
May 02 06:41:39 minio[52806]: runtime/panic.go:965 +0x1b9
May 02 06:41:39 minio[52806]: net/http.checkWriteHeaderCode(...)
May 02 06:41:39 minio[52806]: net/http/server.go:1092
May 02 06:41:39 minio[52806]: net/http.(*response).WriteHeader(0xc0406e0fc0, 0x0)
May 02 06:41:39 minio[52806]: net/http/server.go:1126 +0x718
May 02 06:41:39 minio[52806]: github.com/minio/minio/internal/logger.(*ResponseWriter).WriteHeader(0xc032fa3ea0, 0x0)
May 02 06:41:39 minio[52806]: github.com/minio/minio/internal/logger/audit.go:116 +0xb1
May 02 06:41:39 minio[52806]: github.com/minio/minio/internal/logger.(*ResponseWriter).WriteHeader(0xc032fa3f40, 0x0)
May 02 06:41:39 minio[52806]: github.com/minio/minio/internal/logger/audit.go:116 +0xb1
May 02 06:41:39 minio[52806]: github.com/minio/minio/internal/logger.(*ResponseWriter).WriteHeader(0xc002ce8000, 0x0)
May 02 06:41:39 minio[52806]: github.com/minio/minio/internal/logger/audit.go:116 +0xb1
May 02 06:41:39 minio[52806]: github.com/minio/minio/cmd.writeResponse(0x4f364a0, 0xc002ce8000, 0x0, 0xc0443b86c0, 0x1cb, 0x224, 0x2a9651e, 0xf)
May 02 06:41:39 minio[52806]: github.com/minio/minio/cmd/api-response.go:736 +0x18d
May 02 06:41:39 minio[52806]: github.com/minio/minio/cmd.writeErrorResponse(0x4f44218, 0xc069086ae0, 0x4f364a0, 0xc002ce8000, 0x0, 0x0, 0x0, 0x0, 0x0, 0xc00656afc0)
May 02 06:41:39 minio[52806]: github.com/minio/minio/cmd/api-response.go:798 +0x306
May 02 06:41:39 minio[52806]: github.com/minio/minio/cmd.objectAPIHandlers.getObjectHandler(0x4b73768, 0x4b73730, 0x4f44218, 0xc069086ae0, 0x4f82090, 0xc002d80620, 0xc040e03885, 0xe, 0xc040e03894, 0x61, ...)
May 02 06:41:39 minio[52806]: github.com/minio/minio/cmd/object-handlers.go:456 +0x252c
```
space characters at the beginning or at the end can lead to
confusion under various UI elements in differentiating the
actual name of "policy, user or group" - to avoid this behavior
this PR onwards we shall reject such inputs for newer entries.
existing saved entries will behave as is and are going to be
operable until they are removed/renamed to something more
meaningful.
- When using multiple providers, claim-based providers are not allowed. All
providers must use role policies.
- Update markdown config to allow `details` HTML element
this is allowed as long as order is preserved as is
on an existing setup, the new command line is updated
in `pool.bin` to facilitate future decommission's on
these pools.
introduce x-minio-force-create environment variable
to force create a bucket and its metadata as required,
it is useful in some situations when bucket metadata
needs recovery.
improvements in this PR include
- decommission objects that have __XLDIR__ suffix
- decommission objects that have `null` version on
a versioned bucket.
- make sure to look for any "decom" failures to ensure
that we do not wrong conclude decom as complete without
all files getting copied over.
- break out eagerly upon first error for objects with
multiple versions, leave the object as is for support
debugging and analysis.
heal bucket metadata and IAM entries for
sites participating in site replication from
the site with the most updated entry.
Co-authored-by: Harshavardhana <harsha@minio.io>
Co-authored-by: Aditya Manthramurthy <aditya@minio.io>
The site replication status call was using a loop iteration variable sent
directly into go-routines instead of being passed as an argument. As the
variable is being updated in the loop, previously launched go routines do not
necessarily use the value at the time they were launched.
This PR fixes two issues
- The first fix is a regression from #14555, the fix itself in #14555
is correct but the interpretation of that information by the
object layer code for "replication" was not correct. This PR
tries to fix this situation by making sure the "Delete" replication
works as expected when "VersionPurgeStatus" is already set.
Without this fix, there is a DELETE marker created incorrectly on
the source where the "DELETE" was triggered.
- The second fix is perhaps an older problem started since we inlined-data
on the disk for small objects, CopyObject() incorrectly inline's
a non-inlined data. This is due to the fact that we have code where
we read the `part.1` under certain conditions where the size of the
`part.1` is less than the specific "threshold".
This eventually causes problems when we are "deleting" the data that
is only inlined, which means dataDir is ignored leaving such
dataDir on the disk, that looks like an inconsistent content on
the namespace.
fixes#14767
It is wasteful to allow parallel upgrades of MinIO server. This also generates
weird error invoked by selfupdate module when it happens such as:
'rename /opt/bin/.minio.old /opt/bin/..minio.old.old'
currently filterPefix was never used and set
that would filter out entries when needed
when `prefix` doesn't end with `/` - this
often leads to objects getting Walked(), Healed()
that were never requested by the caller.
without this wait there is a potential for some objects
that are in actively being decommissioned would cancel,
however the decommission status might wrongly conclude
this as "Complete".
To avoid this make sure to add waitgroups on the parallel
workers, allowing parallel copies to complete fully before
we return.
In previous releases, mc admin user list would return the list of users
that have policies mapped in IAM database. However, this was removed but
this commit will bring it back until we revamp this.
- This change switches to a new parquet library
- SelectObjectContent now takes a single lock at the beginning and holds it
during the operation. Previously the operation took a lock every time the
parquet library performed a Seek on the underlying object stream.
- Add basic support for LogicalType annotations for timestamps.
Execute the object, drive and net speedtests as part of the healthinfo
(if requested by the client), and include their result in the response.
The options for the speedtests have been picked from the default values
used by `mc support perf` command.
This commit improves the listing of encrypted objects:
- Use `etag.Format` and `etag.Decrypt`
- Detect SSE-S3 single-part objects in a single iteration
- Fix batch size to `250`
- Pass request context to `DecryptAll` to not waste resources
when a client cancels the operation.
Signed-off-by: Andreas Auernhammer <hi@aead.dev>
This commit adds two new functions to the
internal `etag` package:
- `ETag.Format`
- `Decrypt`
The `Decrypt` function decrypts an encrypted
ETag using a decryption key. It returns not
encrypted / multipart ETags unmodified.
The `Decrypt` function is mainly used when
handling SSE-S3 encrypted single-part objects.
In particular, the ETag of an SSE-S3 encrypted
single-part object needs to be decrypted since
S3 clients expect that this ETag is equal to the
content MD5.
The `ETag.Format` method also covers SSE ETag handling.
MinIO encrypts all ETags of SSE single part objects.
However, only the ETag of SSE-S3 encrypted single part
objects needs to be decrypted.
The ETag of an SSE-C or SSE-KMS single part object
does not correspond to its content MD5 and can be
a random value.
The `ETag.Format` function formats an ETag such that
it is an AWS S3 compliant ETag. In particular, it
returns non-encrypted ETags (single / multipart)
unmodified. However, for encrypted ETags it returns
the trailing 16 bytes as ETag. For encrypted ETags
the last 16 bytes will be a random value.
The main purpose of `Format` is to format ETags
such that clients accept them as well-formed AWS S3
ETags.
It differs from the `String` method since `String`
will return string representations for encrypted
ETags that are not AWS S3 compliant.
Signed-off-by: Andreas Auernhammer <hi@aead.dev>
The deployment id was being written to the health report towards the end
of the handler. Because of this, if there was a timeout in any of the
data fetching, the deployment id was not getting written at all. Upload
of such reports fails on SUBNET as deployment id is the unique
identifier for a cluster in subnet.
Fixed by writing the deployment id at the beginning of the processing.
This commit simplifies the ETag decryption and size adjustment
when listing object parts.
When listing object parts, MinIO has to decrypt the ETag of all
parts if and only if the object resp. the parts is encrypted using
SSE-S3.
In case of SSE-KMS and SSE-C, MinIO returns a pseudo-random ETag.
This is inline with AWS S3 behavior.
Further, MinIO has to adjust the size of all encrypted parts due to
the encryption overhead.
The ListObjectParts does specifically not use the KMS bulk decryption
API (4d2fc530d0) since the ETags of all
parts are encrypted using the same object encryption key. Therefore,
MinIO only has to connect to the KMS once, even if there are multiple
parts resp. ETags. It can simply reuse the same object encryption key.
Signed-off-by: Andreas Auernhammer <hi@aead.dev>
This commit adds support for encrypted KES
client private keys.
Now, it is possible to encrypt the KES client
private key (`MINIO_KMS_KES_KEY_FILE`) with
a password.
For example, KES CLI already supports the
creation of encrypted private keys:
```
kes identity new --encrypt --key client.key --cert client.crt MinIO
```
To decrypt an encrypted private key, the password
needs to be provided:
```
MINIO_KMS_KES_KEY_PASSWORD=<password>
```
Signed-off-by: Andreas Auernhammer <hi@aead.dev>
This commit optimises the ETag decryption when
listing objects.
When MinIO lists objects, it has to decrypt the
ETags of single-part SSE-S3 objects.
It does not need to decrypt ETags of
- plaintext objects => Their ETag is not encrypted
- SSE-C objects => Their ETag is not the content MD5
- SSE-KMS objects => Their ETag is not the content MD5
- multipart objects => Their ETag is not encrypted
Hence, MinIO only needs to make a call to the KMS
when it needs to decrypt a single-part SSE-S3 object.
It can resolve the ETags off all other object types
locally.
This commit implements the above semantics by
processing an object listing in batches.
If the batch contains no single-part SSE-S3 object,
then no KMS calls will be made.
If the batch contains at least one single-part
SSE-S3 object we have to make at least one KMS call.
No we first filter all single-part SSE-S3 objects
such that we only request the decryption keys for
these objects.
Once we know which objects resp. ETags require a
decryption key, MinIO either uses the KES bulk
decryption API (if supported) or decrypts each
ETag serially.
This commit is a significant improvement compared
to the previous listing code. Before, a single
non-SSE-S3 object caused MinIO to fall-back to
a serial ETag decryption.
For example, if a batch consisted of 249 SSE-S3
objects and one single SSE-KMS object, MinIO would
send 249 requests to the KMS.
Now, MinIO will send a single request for exactly
those 249 objects and skip the one SSE-KMS object
since it can handle its ETag locally.
Further, MinIO would request decryption keys
for SSE-S3 multipart objects in the past - even
though multipart ETags are not encrypted.
So, if a bucket contained only multipart SSE-S3
objects, MinIO would make totally unnecessary
requests to the KMS.
Now, MinIO simply skips these multipart objects
since it can handle the ETags locally.
Signed-off-by: Andreas Auernhammer <hi@aead.dev>
In bulk ETag decryption, do not rely on the etag to check if it is
encrypted or not to decide if we should set the actual object size in
ObjectInfo. The reason is that multipart objects ETags are not
encrypted.
Always get the actual object size in that case.
This commit adds support for bulk ETag
decryption for SSE-S3 encrypted objects.
If KES supports a bulk decryption API, then
MinIO will check whether its policy grants
access to this API. If so, MinIO will use
a bulk API call instead of sending encrypted
ETags serially to KES.
Note that MinIO will not use the KES bulk API
if its client certificate is an admin identity.
MinIO will process object listings in batches.
A batch has a configurable size that can be set
via `MINIO_KMS_KES_BULK_API_BATCH_SIZE=N`.
It defaults to `500`.
This env. variable is experimental and may be
renamed / removed in the future.
Signed-off-by: Andreas Auernhammer <hi@aead.dev>
ListObjects, ListObjectsV2 calls are being heavily taxed when
there are many versions on objects left over from a previous
release or ILM was never setup to clean them up. Instead
of being absolutely correct at resolving the exact latest
version of an object, we simply rely on the top most 1
version and resolve the rest.
Once we have obtained the top most "1" version for
ListObject, ListObjectsV2 call we break out.
For ListObjects and ListObjectsV2 perform lifecycle checks on
all objects before returning. This will filter out objects that are
pending lifecycle expiration.
Bonus: Cheaper server pool conflict resolution by not converting to FileInfo.
When reloading a dynamic config allow the request pool to scale both ways.
Existing requests hold on to the previous pool, so they will pop the elements from that.
currently an on-going decommission, during a server
restart might block the startup sequence for relatively
longer periods, instead start the decommission in
background lazily.
This commit fixes two bugs in the `PutObjectPartHandler`.
First, `PutObjectPart` should return SSE-KMS headers
when the object is encrypted using SSE-KMS.
Before, this was not the case.
Second, the ETag should always be a 16 byte hex string,
perhaps followed by a `-X` (where `X` is the number of parts).
However, `PutObjectPart` used to return the encrypted ETag
in case of SSE-KMS. This leaks MinIO internal etag details
through the S3 API.
The combination of both bugs causes clients that use SSE-KMS
to fail when trying to validate the ETag. Since `PutObjectPart`
did not send the SSE-KMS response headers, the response looked
like a plaintext `PutObjectPart` response. Hence, the client
tries to verify that the ETag is the content-md5 of the part.
This could never be the case, since MinIO used to return the
encrypted ETag.
Therefore, clients behaving as specified by the S3 protocol
tried to verify the ETag in a situation they should not.
Signed-off-by: Andreas Auernhammer <hi@aead.dev>
When more than 2 disks are unavailable for listing, the same disk will be used for fallback.
This makes quorum calculations incorrect since the same disk will have multiple entries.
This PR keeps track of which fallback disks have been handed out and only every returns a disk once.
avoids creating new transport for each `isServerResolvable`
request, instead re-use the available global transport and do
not try to forcibly close connections to avoid TIME_WAIT
build upon large clusters.
Never use httpClient.CloseIdleConnections() since that can have
a drastic effect on existing connections on the transport pool.
Remove it everywhere.
- GetObject() with vid should return 405
- GetObject() without vid should return 404
- ListObjects() should ignore this object if this is the "latest" version of the object
- ListObjectVersions() should list this object as "DELETE marker"
- Remove data parts before sync'ing the version pending purge
changing root credentials makes service accounts
in-operable, this PR changes the way sessionToken
is generated for service accounts.
It changes service account behavior to generate
sessionToken claims from its own secret instead
of using global root credential.
Existing credentials will be supported by
falling back to verify using root credential.
fixes#14530
```
tmp = buf[want:]
```
Would potentially crash when `buf` is truncated for some reason
and does not have the expected bytes, this is of course considered
not normal and is an odd situation. But we do not need to crash
here instead allow for errors to be returned and let callers handle
the errors.
This PR simply adds a warning message when it detects older kernel
versions and warn's them about potential performance issues on this
kernel.
The issue can be seen only with parallel I/O across all drives
on denser setups such as 90 drives or 45 drives per server configurations.
This type of code is not necessary, read's of all
metadata content at `.minio.sys/config` automatically
triggers healing when necessary in the GetObjectNInfo()
call-path.
Having this code is not useful and this also adds to
the overall startup time of MinIO when there are lots
of users and policies.
The main goal of this PR is to solve the situation where disks stop
responding to operations. This generally causes an FD build-up and
eventually will crash the server.
This adds detection of hung disks, where calls on disk get stuck.
We add functionality to `xlStorageDiskIDCheck` where it keeps
track of the number of concurrent requests on a given disk.
A total number of 100 operations are allowed. If this limit is reached
we will block (but not reject) new requests, but we will monitor the
state of the disk.
If no requests have been completed or updated within a 15-second
window, we mark the disk as offline. Requests that are blocked will be
unblocked and return an error as "faulty disk".
New requests will be rejected until the disk is marked OK again.
Once a disk has been marked faulty, a check will run every 5 seconds that
will attempt to write and read back a file. As long as this fails the disk will
remain faulty.
To prevent lots of long-running requests to mark the disk faulty we
implement a callback feature that allows updating the status as parts
of these operations are running.
We add a reader and writer wrapper that will update the status of each
successful read/write operation. This should allow fine enough granularity
that a slow, but still operational disk will not reach 15 seconds where
50 operations have not progressed.
Note that errors themselves are not enough to mark a disk faulty.
A nil (or io.EOF) error will mark a disk as "good".
* Make concurrent disk setting configurable via `_MINIO_DISK_MAX_CONCURRENT`.
* de-couple IsOnline() from disk health tracker
The purpose of IsOnline() is to ensure that we
reconnect the drive only when the "drive" was
- disconnected from network we need to validate
if the drive is "correct" and is the same drive
which belongs to this server.
- drive was replaced we have to format it - we
support hot swapping of the drives.
IsOnline() is not meant for taking the drive offline
when it is hung, it is not useful we can let the
drive be online instead "return" errors for relevant
calls.
* return errFaultyDisk for DiskInfo() call
Co-authored-by: Harshavardhana <harsha@minio.io>
Possible future Improvements:
* Unify the REST server and local xlStorageDiskIDCheck. This would also improve stats significantly.
* Allow reads/writes to be aborted by the context.
* Add usage stats, concurrent count, blocked operations, etc.
Data usage does not always contain tiering info even if the data usage
information is valid. Avoid a crash in that case.
(e.g. the scanner scanned the namespace, the user enables tiering,
prometheus scrapes the server before the scanner gets a chance to
update the data usage with new tiering information)
Healing decisions would align with skipped folder counters. This can lead to files
never being selected for heal checks on "clean" paths.
Use different hashing methods and take objectHealProbDiv into account when
calculating the cycle.
Found by @vadmeste
This is a side-affect of the optimization done in PR #13544 which
causes a certain type of delete operations on given object versions
can cause lastVersion indication to be skipped, which leads to
an `xl.meta` where Versions[] slice is empty while the entire
file is intact by itself.
This PR tries to ensure that such files are visible and deletable
by regular means of listing as null 'delete-marker' and also
avoid the situation where this potential issue might arise.
When scanning using normal mode, HealObject() can report an
error saying that it found a corrupted part. This doesn't have
when HealObject() is called with bitrot scan flag. However, when
this happens, we can still restart HealObject() with the bitrot scan.
This is also important because this means the scanner and the
new disks healer will not be able to heal an object that doesn't
exist in a specific disk and has corruption in another disk.
Also without this PR, mc admin heal command without bitrot will report
an error.
This commit removes some duplicate code that
converts KES API errors.
This code was added since KES `0.18.0` changed
some exported API errors. However, the KES SDK
handles this error conversion itself.
Therefore, it is not necessary to duplicate this
behavior in MinIO.
See: 21555fa624/error.go (L94)
Signed-off-by: Andreas Auernhammer <hi@aead.dev>
- Updating KES dependency to v.0.18.0
- Fixing incompatibility issue when checking for errors during KES key creation
Signed-off-by: Lenin Alevski <alevsk.8772@gmail.com>
In a distributed setup, a DiskInfo REST call to an unformatted disk
returns an error with no disk information, such as the disk endpoint
URL, which is unexpected.
metadata headers can have headers without values
as per AWS S3 spec however, we need to skip some
headers that do not have values that potentially
can have empty values set.
small setups do not return appropriate errors when speedtest
cannot run on small tiny setups, allow the tests to fail
appropriately more pro-actively.
many users bring toy setups, this PR simply returns an error
in such situations.
healing disks take active I/O it is possible
that deleted objects might stay in .trash
folder for a really long time until the drive
is fully healed.
this PR changes it such that we are making sure
we purge the active content written to these
disks as well.
- speedtest logs calls that were canceled
spuriously, in situations where it should
be ignored.
- all errors of interest are always sent back
to the client there is no need to log them
on the server console.
- PUT failures should negate the increments
such that GET is not attempted on unsuccessful
calls.
- do not attempt MRF on speedtest objects.
In the testing mode, reformatting disks will fail because the healing
code will complain if one disk is in root mode. This commit will
automatically set all disks as non-root if MINIO_CI_CD is set.
Currently, when applying any dynamic config, the system reloads and
re-applies the config of all the dynamic sub-systems.
This PR refactors the code in such a way that changing config of a given
dynamic sub-system will work on only that sub-system.
An onlineDisk means its a valid disk but it may be a
re-connected disk, this PR verifies that based on LastConn()
to only trigger MRF. Current code would again re-load the
disk 'format.json' which is not necessary and perhaps an
unnecessary call.
A potential side affect of this is closing perfectly online
disks and getting re-replaced by reloading 'format.json'.
This PR tries to avoid this situation by making sure MRF
is triggered but not reloading 'format.json' because of MRF.
Only the first `listAndHeal` would ever be able to write on errCh, blocking all others infinitely.
Instead read all errors but return the first non-nil, if any.
The intention appears to be that this should cancel on any error,
so that part is kept.
Regression from #13990
When more than one gateway reads and writes from the same mount point
and there is a load balancer pointing to those gateways. Each gateway
will try to create its own temporary append file but fails to clear it later
when not needed.
This commit creates a routine that checks all upload IDs saved in
multipart directory and remove any stale entry with the same upload id
in the memory and in the temporary background append folder as well.
Enabled with `mc admin config set alias/ api gzip_objects=on`
Standard filtering applies (1K response minimum, not compressed content
type, not range request, gzip accepted by client).
The current code considers a pool with all root disks to be as part
of a testing environment even if there are other pools with mounted
disks. This will result to illegitimate writing in root disks.
Fix this by simplifing the logic: require MINIO_CI_CD in order to skip
root disk check.
MinIO configuration is loaded after the initialization of the server
handlers, which will miss the initialization of the bucket forwarder
handler.
Though the federation is deprecated, let's fix this for the time being.
S3 spec returns x-amz-restore header in HEAD/GET object with the
following format:
```
x-amz-restore: ongoing-request="false", expiry-date="Fri, 21 Dec 2012
00:00:00 GMT"
```
This commit adds quotes as the current code does not support it. It will
also supports the old format saved in the disk (in xl.meta) for backward
compatibility.
A regression removed support of federation in the gateway mode.
Enable it again.
Federation is deprecated for a while but let's fix this for the time being.
Deleting bulk objects had an issue since the relevant versionID
is not passed through the layers to ensure that the dangling
object purge actually works cleanly.
This is a continuation of quorum related error returned by
multi-object delete API from #14248
This PR ensures that we pass down correct information as
well as extend the scope of dangling object detection.
When setting a config of a particular sub-system, validate the existing
config and notification targets of only that sub-system, so that
existing errors related to one sub-system (e.g. notification target
offline) do not result in errors for other sub-systems.
Some users running MinIO claim that their system became slow. One
way to investigate is to look at this Prometheus history of the number of
the requests reaching the server. The existing current S3 requests metric
is not enough because it can increase of the system really becomes slow,
due to disk issues for example.
startup speed-up, currently getFormatErasureInQuorum()
would spend up to 2-3secs when there are 3000+ drives
for example in a setup, simplify this implementation
to use drive counts.
DeleteMarkers do not have a default quorum, i.e it is possible that
DeleteMarkers were created with n/2+1 quorum as well to make sure
that we satisfy situations such as those we need to make sure delete
markers only expect n/2 read quorum.
Additionally we should also look at additional metadata on the
actual objects that might have been "erasure" upgraded with new
parity when disks are down.
In such a scenario do not default to the standard storage class
parity, instead use the parityBlocks present on the FileInfo to
ensure that we are dealing with the correct quorum for READs and
DELETEs.
Retry listings, when no next marker is returned and the result isn't truncated.
This can happen when an object is queued, but no info can be fetched.
Fixes#14190
The healing code repeatedly tries to heal a root disk when it is empty
the reason is that connectEndpoint() returns errUnformattedDisk even
if the disk is a root disk. Changing that to returning another error
will avoid queueing the disk to the healing code in each connect disks
iteration.
some upgraded objects might not get listed due
to different quorum ratios across objects.
make sure to list all objects that satisfy the
maximum possible quorum.
Klaus Post
Harshavardhana
Krishnan Parthasarathi
Shireesh Anjal
Poorna
Aditya Manthramurthy
Anis Elleuch
Daniel Valdivia
polaris-megrez
Krishna Srinivas
Lenin Alevski
Andreas Auernhammer
Minio Trusted
Xuehan Xu
hellivan
Daniel
Sidhartha Mani