avoids creating new transport for each `isServerResolvable`
request, instead re-use the available global transport and do
not try to forcibly close connections to avoid TIME_WAIT
build upon large clusters.
Never use httpClient.CloseIdleConnections() since that can have
a drastic effect on existing connections on the transport pool.
Remove it everywhere.
PR introduced in #13819 was incorrect and was not
handling the situation where a buffer is full can
cause incessant amount of logs that would keep the
logger webhook overrun by the requests.
To avoid this only log failures to console logger
instead of all targets as it can cause self reference,
leading to an infinite loop.
This PR simply adds a warning message when it detects older kernel
versions and warn's them about potential performance issues on this
kernel.
The issue can be seen only with parallel I/O across all drives
on denser setups such as 90 drives or 45 drives per server configurations.
The main goal of this PR is to solve the situation where disks stop
responding to operations. This generally causes an FD build-up and
eventually will crash the server.
This adds detection of hung disks, where calls on disk get stuck.
We add functionality to `xlStorageDiskIDCheck` where it keeps
track of the number of concurrent requests on a given disk.
A total number of 100 operations are allowed. If this limit is reached
we will block (but not reject) new requests, but we will monitor the
state of the disk.
If no requests have been completed or updated within a 15-second
window, we mark the disk as offline. Requests that are blocked will be
unblocked and return an error as "faulty disk".
New requests will be rejected until the disk is marked OK again.
Once a disk has been marked faulty, a check will run every 5 seconds that
will attempt to write and read back a file. As long as this fails the disk will
remain faulty.
To prevent lots of long-running requests to mark the disk faulty we
implement a callback feature that allows updating the status as parts
of these operations are running.
We add a reader and writer wrapper that will update the status of each
successful read/write operation. This should allow fine enough granularity
that a slow, but still operational disk will not reach 15 seconds where
50 operations have not progressed.
Note that errors themselves are not enough to mark a disk faulty.
A nil (or io.EOF) error will mark a disk as "good".
* Make concurrent disk setting configurable via `_MINIO_DISK_MAX_CONCURRENT`.
* de-couple IsOnline() from disk health tracker
The purpose of IsOnline() is to ensure that we
reconnect the drive only when the "drive" was
- disconnected from network we need to validate
if the drive is "correct" and is the same drive
which belongs to this server.
- drive was replaced we have to format it - we
support hot swapping of the drives.
IsOnline() is not meant for taking the drive offline
when it is hung, it is not useful we can let the
drive be online instead "return" errors for relevant
calls.
* return errFaultyDisk for DiskInfo() call
Co-authored-by: Harshavardhana <harsha@minio.io>
Possible future Improvements:
* Unify the REST server and local xlStorageDiskIDCheck. This would also improve stats significantly.
* Allow reads/writes to be aborted by the context.
* Add usage stats, concurrent count, blocked operations, etc.
This commit removes some duplicate code that
converts KES API errors.
This code was added since KES `0.18.0` changed
some exported API errors. However, the KES SDK
handles this error conversion itself.
Therefore, it is not necessary to duplicate this
behavior in MinIO.
See: 21555fa624/error.go (L94)
Signed-off-by: Andreas Auernhammer <hi@aead.dev>
- Updating KES dependency to v.0.18.0
- Fixing incompatibility issue when checking for errors during KES key creation
Signed-off-by: Lenin Alevski <alevsk.8772@gmail.com>
fixes a regression introduced in #14269 that refactored
the notification registration logic, all the amqp targets
however online will not be available for use anymore.
fixes#14451
Up until now `InitializeProvider` method of `Config` struct was
implemented on a value receiver which is why changes on `provider`
field where never reflected to method callers. In order to fix this
issue, the method was implemented on a pointer receiver.
This is a regression from #14037, distributed setups
with MQTT was not working anymore. According to MQTT
spec it is expected this is unique per server.
We shall proceed to use unix nano timestamp hex
value instead here.
Currently, when applying any dynamic config, the system reloads and
re-applies the config of all the dynamic sub-systems.
This PR refactors the code in such a way that changing config of a given
dynamic sub-system will work on only that sub-system.
The `LookupConfig` code was not using `GetWithDefault`, because of which
some of the config values were being returned as empty string, and calls
like `strconv.Atoi` and `time.ParseDuration` on these were failing.
Enabled with `mc admin config set alias/ api gzip_objects=on`
Standard filtering applies (1K response minimum, not compressed content
type, not range request, gzip accepted by client).
When setting a config of a particular sub-system, validate the existing
config and notification targets of only that sub-system, so that
existing errors related to one sub-system (e.g. notification target
offline) do not result in errors for other sub-systems.
This change allows the MinIO server to lookup users in different directory
sub-trees by allowing specification of multiple search bases separated by
semicolons.
This speed-up is intended for faster startup times
for almost all MinIO operations. Changes here are
- Drives are not re-read for 'format.json' on a regular
basis once read during init is remembered and refreshed
at 5 second intervals.
- Do not do O_DIRECT tests on drives with existing 'format.json'
only fresh setups need this check.
- Parallelize initializing erasureSets for multiple sets.
- Avoid re-reading format.json when migrating 'format.json'
from really old V1->V2->V3
- Keep a copy of local drives for any given server in memory
for a quick lookup.
repeated reads on single large objects in HPC like
workloads, need the following option to disable
O_DIRECT for a more effective usage of the kernel
page-cache.
However this optional should be used in very specific
situations only, and shouldn't be enabled on all
servers.
NVMe servers benefit always from keeping O_DIRECT on.
The code was not properly deciding if a lock needs to be removed
when it doesn't have quorum anymore. After this commit, a lock will be
forcefully unlocked if nodes reporting they are not able to find a lock
internally breaks the quorum.
Simplify the code as well.
```
λ mc admin decommission start alias/ http://minio{1...2}/data{1...4}
```
```
λ mc admin decommission status alias/
┌─────┬─────────────────────────────────┬──────────────────────────────────┬────────┐
│ ID │ Pools │ Capacity │ Status │
│ 1st │ http://minio{1...2}/data{1...4} │ 439 GiB (used) / 561 GiB (total) │ Active │
│ 2nd │ http://minio{3...4}/data{1...4} │ 329 GiB (used) / 421 GiB (total) │ Active │
└─────┴─────────────────────────────────┴──────────────────────────────────┴────────┘
```
```
λ mc admin decommission status alias/ http://minio{1...2}/data{1...4}
Progress: ===================> [1GiB/sec] [15%] [4TiB/50TiB]
Time Remaining: 4 hours (started 3 hours ago)
```
```
λ mc admin decommission status alias/ http://minio{1...2}/data{1...4}
ERROR: This pool is not scheduled for decommissioning currently.
```
```
λ mc admin decommission cancel alias/
┌─────┬─────────────────────────────────┬──────────────────────────────────┬──────────┐
│ ID │ Pools │ Capacity │ Status │
│ 1st │ http://minio{1...2}/data{1...4} │ 439 GiB (used) / 561 GiB (total) │ Draining │
└─────┴─────────────────────────────────┴──────────────────────────────────┴──────────┘
```
> NOTE: Canceled decommission will not make the pool active again, since we might have
> Potentially partial duplicate content on the other pools, to avoid this scenario be
> very sure to start decommissioning as a planned activity.
```
λ mc admin decommission cancel alias/ http://minio{1...2}/data{1...4}
┌─────┬─────────────────────────────────┬──────────────────────────────────┬────────────────────┐
│ ID │ Pools │ Capacity │ Status │
│ 1st │ http://minio{1...2}/data{1...4} │ 439 GiB (used) / 561 GiB (total) │ Draining(Canceled) │
└─────┴─────────────────────────────────┴──────────────────────────────────┴────────────────────┘
```
- This allows site-replication to be configured when using OpenID or the
internal IDentity Provider.
- Internal IDP IAM users and groups will now be replicated to all members of the
set of replicated sites.
- When using OpenID as the external identity provider, STS and service accounts
are replicated.
- Currently this change dis-allows root service accounts from being
replicated (TODO: discuss security implications).
time.Format() is not necessary prematurely for JSON
marshalling, since JSON marshalling indeed defaults
to RFC3339Nano.
This also ensures the 'time' is remembered until its
logged and it is the same time when the 'caller'
invoked 'log' functions.
Also log all the missed events and logs instead of silently
swallowing the events.
Bonus: Extend the logger webhook to support mTLS
similar to audit webhook target.
Return as soon as an AND fails and whenever an OR succeeds. Faster and more flexible.
For example makes `select * from S3object where _2 != '' AND _2 > 1` able to operate on empty fields.
Followup to #13900
- Rename MaxNoncurrentVersions tag to NewerNoncurrentVersions
Note: We apply overlapping NewerNoncurrentVersions rules such that
we honor the highest among applicable limits. e.g if 2 overlapping rules
are configured with 2 and 3 noncurrent versions to be retained, we
will retain 3.
- Expire newer noncurrent versions after noncurrent days
- MinIO extension: allow noncurrent days to be zero, allowing expiry
of noncurrent version as soon as more than configured
NewerNoncurrentVersions are present.
- Allow NewerNoncurrentVersions rules on object-locked buckets
- No x-amz-expiration when NewerNoncurrentVersions configured
- ComputeAction should skip rules with NewerNoncurrentVersions > 0
- Add unit tests for lifecycle.ComputeAction
- Support lifecycle rules with MaxNoncurrentVersions
- Extend ExpectedExpiryTime to work with zero days
- Fix all-time comparisons to be relative to UTC
The earlier approach of using a license token for
communicating with SUBNET is being replaced
with a simpler mechanism of API keys. Unlike the
license which is a JWT token, these API keys will
be simple UUID tokens and don't have any embedded
information in them. SUBNET would generate the
API key on cluster registration, and then it would
be saved in this config, to be used for subsequent
communication with SUBNET.
- Allows setting a role policy parameter when configuring OIDC provider
- When role policy is set, the server prints a role ARN usable in STS API requests
- The given role policy is applied to STS API requests when the roleARN parameter is provided.
- Service accounts for role policy are also possible and work as expected.
- New sub-system has "region" and "name" fields.
- `region` subsystem is marked as deprecated, however still works, unless the
new region parameter under `site` is set - in this case, the region subsystem is
ignored. `region` subsystem is hidden from top-level help (i.e. from `mc admin
config set myminio`), but appears when specifically requested (i.e. with `mc
admin config set myminio region`).
- MINIO_REGION, MINIO_REGION_NAME are supported as legacy environment variables for server region.
- Adds MINIO_SITE_REGION as the current environment variable to configure the
server region and MINIO_SITE_NAME for the site name.
This unit allows users to limit the maximum number of noncurrent
versions of an object.
To enable this rule you need the following *ilm.json*
```
cat >> ilm.json <<EOF
{
"Rules": [
{
"ID": "test-max-noncurrent",
"Status": "Enabled",
"Filter": {
"Prefix": "user-uploads/"
},
"NoncurrentVersionExpiration": {
"MaxNoncurrentVersions": 5
}
}
]
}
EOF
mc ilm import myminio/mybucket < ilm.json
```
- Go might reset the internal http.ResponseWriter() to `nil`
after Write() failure if the go-routine has returned, do not
flush() such scenarios and avoid spurious flushes() as
returning handlers always flush.
- fix some racy tests with the console
- avoid ticker leaks in certain situations
This feature is useful in situations when console is exposed
over multiple intranent or internet entities when users are
connecting over local IP v/s going through load balancer.
Related console work was merged here
373bfbfe3f
- remove some duplicated code
- reported a bug, separately fixed in #13664
- using strings.ReplaceAll() when needed
- using filepath.ToSlash() use when needed
- remove all non-Go style comments from the codebase
Co-authored-by: Aditya Manthramurthy <donatello@users.noreply.github.com>
If a given MinIO config is dynamic (can be changed without restart),
ensure that it can be reset also without restart.
Signed-off-by: Shireesh Anjal <shireesh@minio.io>
Borrowed idea from Go's usage of this
optimization for ReadFrom() on client
side, we should re-use the 32k buffers
io.Copy() allocates for generic copy
from a reader to writer.
the performance increase for reads for
really tiny objects is at this range
after this change.
> * Fastest: +7.89% (+1.3 MiB/s) throughput, +7.89% (+1308.1) obj/s
Preemptively disable AVX512 until https://github.com/golang/go/issues/49233 has been resolved.
This potentially affects reedsolomon, simdjson, sha256-simd, md5-simd packages.
Init order requires a separate package since main itself is initialized last, but imports are initialized in the order they are imported from main (confirmed).
read/writers are not concurrent in handlers
and self contained - no need to use atomics on
them.
avoids unnecessary contentions where it's not
required.
Logger targets were not race protected against concurrent updates from for example `HTTPConsoleLoggerSys`.
Restrict direct access to targets and make slices immutable so a returned slice can be processed safely without locks.
various situations where the client is retrying the request
server going through shutdown might incorrectly send 403
which is a non-retriable error, this PR allows for clients
when they retry an attempt to go to another healthy pod
or server in a distributed cluster - assuming it is a properly
load-balanced setup.
also simplify readerLocks to be just like
writeLocks, DRWMutex() is never shared
and there are order guarantees that need
for such a thing to work for RLock's
3DES is enabled by default in Golang, this commit will use
tls.CipherSuites() which returns all ciphers excluding those with
security issues, such as 3DES.
Testing with `mc sql --compression BZIP2 --csv-input "rd=\n,fh=USE,fd=;" --query="select COUNT(*) from S3Object" local2/testbucket/nyc-taxi-data-10M.csv.bz2`
Before 96.98s, after 10.79s. Uses about 70% CPU while running.
Harshavardhana
Aditya Manthramurthy
Klaus Post
Poorna
Andreas Auernhammer
Lenin Alevski
hellivan
Shireesh Anjal
Anis Elleuch
Minio Trusted
Krishnan Parthasarathi
Pavel M
moon