* creating a byte buffer for SFTP file segments
* Adding an error condition for when there are
remaining segments in the queue
* Simplification of the queue using a map
it is possible that ILM or Deletes got triggered on batch
of objects that we are attempting to batch replicate, ignore
this scenario as valid behavior.
sendfile implementation to perform DMA on all platforms
Go stdlib already supports sendfile/splice implementations
for
- Linux
- Windows
- *BSD
- Solaris
Along with this change however O_DIRECT for reads() must be
removed as well since we need to use sendfile() implementation
The main reason to add O_DIRECT for reads was to reduce the
chances of page-cache causing OOMs for MinIO, however it would
seem that avoiding buffer copies from user-space to kernel space
this issue is not a problem anymore.
There is no Go based memory allocation required, and neither
the page-cache is referenced back to MinIO. This page-
cache reference is fully owned by kernel at this point, this
essentially should solve the problem of page-cache build up.
With this now we also support SG - when NIC supports Scatter/Gather
https://en.wikipedia.org/wiki/Gather/scatter_(vector_addressing)
`monitorAndConnectEndpoints` will continue to attempt to reconnect offline disks.
Since disks were never closed, a `MarkOffline` would continue to try to check these disks forever.
Close previous disks.
replace io.Discard usage to fix NUMA copy() latencies
On NUMA systems copying from 8K buffer allocated via
io.Discard leads to large latency build-up for every
```
copy(new8kbuf, largebuf)
```
can in-cur upto 1ms worth of latencies on NUMA systems
due to memory sharding across NUMA nodes.
Fix various regressions from #18029
* If context is canceled the token is never returned. This will lead to scanner being unable to save and deadlocking.
* Fix backup not being able to get any data (hr empty)
* Reduce backup timeout.
Tiering statistics have been broken for some time now, a regression
was introduced in 6f2406b0b6
Bonus fixes an issue where the objects are not assumed to be
of the 'STANDARD' storage-class for the objects that have
not yet tiered, this should be conditional based on the object's
metadata not a default assumption.
This PR also does some cleanup in terms of implementation,
fixes#18070
https://github.com/minio/minio/pull/18307 partially removed the duplicate upload id check.
While I can't really see how ListDir can return duplicate entries, let's re-add it, since it is a cheap sanity check.
There can be rare situations where errors seen in bucket metadata
load on startup or subsequent metadata updates can result in missing
replication remotes.
Attempt a refresh of remote targets backed by a good replication config
lazily in 5 minute intervals if there ever occurs a situation where
remote targets go AWOL.
Since relaxing quorum the error across pools
for ListBuckets(), GetBucketInfo() we hit a
situation where loading IAM could potentially
return an error for second pool that server
is not initialized.
We need to handle this, let the pool come online
and retry transparently - this PR fixes that.
x-amz-signed-headers is meant for HTTP headers only
not for query params, using that to verify things
further can lead to failure.
The generated presigned URL with custom metadata
is already kosher (tamper proof).
fixes#18281
`resourceMetricsMap` has no protection against concurrent reads and writes.
Add a mutex and don't use maps from the last iteration.
Bug introduced in #18057Fixes#18271
globalDeploymentID was being read while it was being set.
Fixes race:
```
WARNING: DATA RACE
Write at 0x0000079605a0 by main goroutine:
github.com/minio/minio/cmd.connectLoadInitFormats()
github.com/minio/minio/cmd/prepare-storage.go:269 +0x14f0
github.com/minio/minio/cmd.waitForFormatErasure()
github.com/minio/minio/cmd/prepare-storage.go:294 +0x21d
...
Previous read at 0x0000079605a0 by goroutine 105:
github.com/minio/minio/cmd.newContext()
github.com/minio/minio/cmd/utils.go:817 +0x31e
github.com/minio/minio/cmd.adminMiddleware.func1()
github.com/minio/minio/cmd/admin-router.go:110 +0x96
net/http.HandlerFunc.ServeHTTP()
net/http/server.go:2136 +0x47
github.com/minio/minio/cmd.setBucketForwardingMiddleware.func1()
github.com/minio/minio/cmd/generic-handlers.go:460 +0xb1a
net/http.HandlerFunc.ServeHTTP()
net/http/server.go:2136 +0x47
...
```
currently the default for all drives is 512, which is a lot
for HDDs the recent testing has revealed moving this to 32
for HDDs seems like a fair value.
Introducing a new version of healthinfo struct for adding this info is
not correct. It needs to be implemented differently without adding a new
version.
This reverts commit 8737025d940f80360ed4b3686b332db5156f6659.
There is a fundamental race condition in `newErasureServerPools`, where setObjectLayer is
called before the poolMeta has been loaded/populated.
We add a placeholder value to this field but disable all saving of the value, so we don't risk
overwriting the value on disk. Once the value has been loaded or created, it is replaced with
the proper value, which will also be saved.
Also fixes various accesses of `poolMeta` that were done without locks.
We make the `poolMeta.IsSuspended` return false, even if we shouldn't risk out-of-bounds
reads anymore.
if erasure upgrade is needed rely on the in-memory
values, instead of performing a "DiskInfo()" call.
https://brendangregg.com/blog/2016-09-03/sudden-disk-busy.html
for HDDs these are problematic, lets avoid this because
there is no value in "being" absolutely strict here
in terms of parity. We are okay to increase parity
as we see based on the in-memory online/offline ratio.
Several callers to putObjectTar may be fighting to set sc. Move the write out of the loop.
Use static resp, and request elements.
Fixes tests with -race:
```
WARNING: DATA RACE
Read at 0x00c01cd680e0 by goroutine 691354:
github.com/minio/minio/cmd.objectAPIHandlers.PutObjectExtractHandler.func1()
e:/gopath/src/github.com/minio/minio/cmd/object-handlers.go:2130 +0x149
github.com/minio/minio/cmd.untar.func1()
e:/gopath/src/github.com/minio/minio/cmd/untar.go:250 +0x2b6
github.com/minio/minio/cmd.untar.func8()
e:/gopath/src/github.com/minio/minio/cmd/untar.go:261 +0xa4
Previous write at 0x00c01cd680e0 by goroutine 691352:
github.com/minio/minio/cmd.objectAPIHandlers.PutObjectExtractHandler.func1()
e:/gopath/src/github.com/minio/minio/cmd/object-handlers.go:2131 +0x15d
github.com/minio/minio/cmd.untar.func1()
e:/gopath/src/github.com/minio/minio/cmd/untar.go:250 +0x2b6
github.com/minio/minio/cmd.untar.func8()
e:/gopath/src/github.com/minio/minio/cmd/untar.go:261 +0xa4
```
Calling unfreezeServices twice results in panic:
```
panic: "POST /minio/peer/v32/signalservice?signal=4&sub-sys=": close of nil channel
goroutine 14703 [running]:
runtime/debug.Stack()
runtime/debug/stack.go:24 +0x65
github.com/minio/minio/cmd.setCriticalErrorHandler.func1.1()
github.com/minio/minio/cmd/generic-handlers.go:549 +0x8e
panic({0x27c3020, 0x4c9b370})
runtime/panic.go:884 +0x212
github.com/minio/minio/cmd.unfreezeServices()
github.com/minio/minio/cmd/service.go:112 +0xc7
github.com/minio/minio/cmd.(*peerRESTServer).SignalServiceHandler(0x0?, {0x4cb6af0, 0xc010b96420}, 0xc01affab00)
github.com/minio/minio/cmd/peer-rest-server.go:837 +0x13a
net/http.HandlerFunc.ServeHTTP(...)
```
If the function was called a second time `val` would not be nil, but the returned channel `ch` would be, causing the panic.
Check the channel isn't nil and also use Swap for an atomic swap instead of 2 separate operations (though we are in a mutex).
Disk level O_DIRECT support checking at xl storage initialization was
conditional on a config setting being enabled. (This never took effect
because config initialization happens after ObjectLayer is ready.) This
is not necessary as the config setting is dynamic - O_DIRECT should be
enabled via runtime config. So we need to do the disk level support
check regardless of the config setting.
- Trace needs higher buffered channels than 4000 to ensure
when we run `mc admin trace -a` it captures all information
sufficiently.
- Listen event notification needs the event channel to be
`apiRequestsMaxPerNode` * number of nodes
Currently, the retry is not fully used when there is no backup copy of
the data usage; use 5 retry attempts when we don't have any valid data,
new or backup, unless we have seen an un-recognized error.
comment in the code provides more detailed explanation
on what this PR entails and its assumptions.
this PR reduces the amount of listing() by an order
of magnitude, however there are other such calls that
still needs further optimization that shall be done
in subsequent PRs.
Add a new endpoint for "resource" metrics `/v2/metrics/resource`
This should return system metrics related to drives, network, CPU and
memory. Except for drives, other metrics should have corresponding "avg"
and "max" values also.
Reuse the real-time feature to capture the required data,
introducing CPU and memory metrics in it.
Collect the data every minute and keep updating the average and max values
accordingly, returning the latest values when the API is called.
without this the rename2() can rename the previous dataDir
causing issues for different versions of the object, only
latest version is preserved due to this bug.
Added healing code to ensure recovery of such content.
not checking w.Close() can prematurely make us
think that the w.Write() actually succeeded, apparently
Write() may or may not return an error but sometimes
only during a Close() call to the fd we may see the
error from Write() propagate.
Fdatasync(w) on the FD would return an error requiring
Close() error handling is less of a concern, however it may
happen such that fdatasync() did not return an error, where
as Close() would.
Currently, setting a new tiering target returns an error when a bucket
is versioned and the tiering credentials does not have authorization to
specify a version-id when reading or removing a specific version;
Since tiering does not require versioning anymore; avoid doing versioned
operations when performing checklist ops while adding a new tiering
configuration.
Do not error out when a provided marker is before or after the prefix, but instead just ignore it if before and return an empty list when after.
Fixes#18093
Include object and versions heal scan times when checking non-empty abandoned folders.
Furthermore don't add delay between healing versions, instead do one per object wait.
This PR changes the StatObject() to be must have for non-minio source
to being a conditional API call.
- Calls StatObject() when needed
- Calls GetObjectTagging() when needed
These calls if we do without these conditionals can cause a lot of
delays, so we avoid them if not needed in more common scenario.
If MinIO started with KMS enabled, MINIO_KMS_KES_KEY_NAME should
be set for server to start.
Signed-off-by: Shubhendu Ram Tripathi <shubhendu@minio.io>
In a perf test, one node will run speed test with all nodes. If there is
an error with a peer node, the peer node name is not included in the
error hence confusing the user.
This commit will add the peer endpoint string to the netperf error.
To ensure that policy mappings are current for service accounts
belonging to (non-derived) STS accounts (like an LDAP user's service
account) we periodically reload such mappings.
This is primarily to handle a case where a policy mapping update
notification is missed by a minio node. Such a node would continue to
have the stale mapping in memory because STS creds/mappings were never
periodically scanned from storage.
- we already have MRF for most recent failures
- we trigger healing during HEAD/GET operation
These are enough, also change the default max wait
from 5sec to 1sec for default scanner speed.
AccountInfo is quite frequently called by the Console UI
login attempts, when many users are logging in it is important
that we provide them with better responsiveness.
- ListBuckets information is cached every second
- Bucket usage info is cached for up to 10 seconds
- Prefix usage (optional) info is cached for up to 10 secs
Failure to update after cache expiration, would still
allow login which would end up providing information
previously cached.
This allows for seamless responsiveness for the Console UI
logins, and overall responsiveness on a heavily loaded
system.
From the Go specification:
"3. If the map is nil, the number of iterations is 0." [1]
Therefore, an additional nil check for before the loop is unnecessary.
[1]: https://go.dev/ref/spec#For_range
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
- remove targetClient for passing around via replicationObjectInfo{}
- remove cloing to object info unnecessarily
- remove objectInfo from replicationObjectInfo{} (only require necessary fields)
When using a chain provider all providers do not return a valid
access and secret key, an anonymous request is sent, which makes it hard
for users to figure out what is going on
In the case of S3 tiering, when AWS IAM temporary account generation returns
an error, an anonymous login will be used because of the chain provider.
Avoid this and use the AWS IAM provider directly to get a good error
message.
This helps reduce disk operations as these periodic routines would not
run concurrently any more.
Also add expired STS purging periodic operation: Since we do not scan
the on-disk STS credentials (and instead only load them on-demand) a
separate routine is needed to purge expired credentials from storage.
Currently this runs about a quarter as often as IAM refresh.
Also fix a bug where with etcd, STS accounts could get loaded into the
iamUsersMap instead of the iamSTSAccountsMap.
This allows scanner to avoid lengthy scans, skip
things appropriately and also not lose metrics in
any manner.
reduce longer deadlines for usage-cache loads/saves
to match the disk timeout which is 2minutes now per
IOP.
In situations with large number of STS credentials on disk, IAM load
time is high. To mitigate this, STS accounts will now be loaded into
memory only on demand - i.e. when the credential is used.
In each IAM cache (re)load we skip loading STS credentials and STS
policy mappings into memory. Since STS accounts only expire and cannot
be deleted, there is no risk of invalid credentials being reused,
because credential validity is checked when it is used.
Currently we have IOPs of these patterns
```
[OS] os.Mkdir play.min.io:9000 /disk1 2.718µs
[OS] os.Mkdir play.min.io:9000 /disk1/data 2.406µs
[OS] os.Mkdir play.min.io:9000 /disk1/data/.minio.sys 4.068µs
[OS] os.Mkdir play.min.io:9000 /disk1/data/.minio.sys/tmp 2.843µs
[OS] os.Mkdir play.min.io:9000 /disk1/data/.minio.sys/tmp/d89c8ceb-f8d1-4cc6-b483-280f87c4719f 20.152µs
```
It can be seen that we can save quite Nx levels such as
if your drive is mounted at `/disk1/minio` you can simply
skip sending an `Mkdir /disk1/` and `Mkdir /disk1/minio`.
Since they are expected to exist already, this PR adds a way
for us to ignore all paths upto the mount or a directory which
ever has been provided to MinIO setup.
Previously existing objects were queued to single worker and MRF re-queues
are also handled by same worker - this does not fully use the available
bandwidth in case there is no incoming workload.
Errors such as
```
returned an error (context deadline exceeded) (*fmt.wrapError)
```
```
(msgp: too few bytes left to read object) (*fmt.wrapError)
```
This change enables embedding files in ZIP with custom permissions.
Also uses default creds for starting MinIO based on inspect data.
Signed-off-by: Shubhendu Ram Tripathi <shubhendu@minio.io>
objects with 10,000 parts and many of them can
cause a large memory spike which can potentially
lead to OOM due to lack of GC.
with previous PR reducing the memory usage significantly
in #17963, this PR reduces this further by 80% under
repeated calls.
Scanner sub-system has no use for the slice of Parts(),
it is better left empty.
```
benchmark old ns/op new ns/op delta
BenchmarkToFileInfo/ToFileInfo-8 295658 188143 -36.36%
benchmark old allocs new allocs delta
BenchmarkToFileInfo/ToFileInfo-8 61 60 -1.64%
benchmark old bytes new bytes delta
BenchmarkToFileInfo/ToFileInfo-8 1097210 227255 -79.29%
```
- this PR avoids sending a large ChecksumInfo slice
when its not needed
- also for a file with XLV2 format there is no reason
to allocate Checksum slice while reading
Keys are helpful to ensure the strict ordering of messages, however currently the
code uses a random request id for every log, hence using the request-id
as a Kafka key is not serve any purpose;
This commit removes the usage of the key, to also fix the audit issue from
internal subsystem that does not have a request ID.
to track the replication transfer rate across different nodes,
number of active workers in use and in-queue stats to get
an idea of the current workload.
This PR also adds replication metrics to the site replication
status API. For site replication, prometheus metrics are
no longer at the bucket level - but at the cluster level.
Add prometheus metric to track credential errors since uptime
replicationTimestamp might differ if there were retries
in replication and the retried attempt overwrote in
quorum but enough shards with newer timestamp causing
the existing timestamps on xl.meta to be invalid, we
do not rely on this value for anything external.
this is purely a hint for debugging purposes, but there
is no real value in it considering the object itself
is in-tact we do not have to spend time healing this
situation.
we may consider healing this situation in future but
that needs to be decoupled to make sure that we do not
over calculate how much we have to heal.
.metacache objects are transient in nature, and are better left to
use page-cache effectively to avoid using more IOPs on the disks.
this allows for incoming calls to be not taxed heavily due to
multiple large batch listings.
given a versionId the mtime is always the same, it
can never be different than its original value.
versionIds also do not conflict, since they are uuid's
and unique practically forever.
we expect a certain level of IOPs and latency so this is okay.
fixes other miscellaneous bugs
- such as hanging on mrfCh <- when the context is canceled
- queuing MRF heal when the context is canceled
- remove unused saveStateCh channel
This commit updates the minio/kes-go dependency
to v0.2.0 and updates the existing code to work
with the new KES APIs.
The `SetPolicy` handler got removed since it
may not get implemented by KES at all and could
not have been used in the past since stateless KES
is read-only w.r.t. policies and identities.
Signed-off-by: Andreas Auernhammer <hi@aead.dev>
Bonus fixes include
- do not have to write final xl.meta (renameData) does this
already, saves some IOPs.
- make sure to purge the multipart directory properly using
a recursive delete, otherwise this can easily pile up and
rely on the stale uploads cleanup.
fixes#17863
This reverts commit bf3901342c.
This is to fix a regression caused when there are inconsistent
versions, but one version is in quorum. SuccessorModTime issue
must be fixed differently.
batch status can perpetually wait after completion
due to a race between the MetricsHandler() returning
the active metrics in intervals of 1sec and delete
of metrics after job completion.
this PR ensures that we keep the 'status' around
for a while, i.e upto 24hrs for all the batch jobs.
Two fields in lifecycles made GOB encoding consistently fail with `gob: type lifecycle.Prefix has no exported fields`.
This meant that in distributed systems listings would never be able to continue and would restart on every call.
Fix issues and be sure to log these errors at least once per bucket. We may see some connectivity errors here, but we shouldn't hide them.
When listing getObjectFileInfo can return `io.EOF` if file is being written.
When we wrap the error it will *not* retry upstream, since `io.EOF` is a valid return value.
Allow one retry before returning errors and canceling the listing.
* optimize deletePrefix, use direct set location via object name
instead of fanning out the calls for an object force delete
we can assume the set location and not do fan-out calls
* Apply suggestions from code review
Co-authored-by: Krishnan Parthasarathi <krisis@users.noreply.github.com>
---------
Co-authored-by: Krishnan Parthasarathi <krisis@users.noreply.github.com>
Bonus:
- avoid calling DiskInfo() calls when missing blocks
instead heal the object using MRF operation.
- change the max_sleep to 250ms beyond that we will
not stop healing.
ignoring valid objects with valid replication metadata
after the Prefix was disabled must still honor the older
metadata.
this can lead to unexpected results, allow it during
READ phase always.
// UnmarshalStrict is like Unmarshal except that any fields that are found
// in the data that do not have corresponding struct members, or mapping
// keys that are duplicates, will result in
// an error.
batch replication pull must preserve versionID regardless
of destination bucket versioning configuration.
This is similar to the issue with decommissioning and rebalancing
health checks were missing for drives replaced since
- HealFormat() would replace the drives without a health check
- disconnected drives when they reconnect via connectEndpoint()
the loop also loses health checks for local disks and merges
these into a single code.
- other than this separate cleanUp, health check variables to avoid
overloading them with similar requirements.
- also ensure that we compete via context selector for disk monitoring
such that the canceled disks don't linger around longer waiting for
the ticker to trigger.
- allow disabling active monitoring.
```
minio[1032735]: panic: label value "\xc0.\xc0." is not valid UTF-8
minio[1032735]: goroutine 1781101 [running]:
minio[1032735]: github.com/prometheus/client_golang/prometheus.MustNewConstMetric(...)
```
log such errors for investigation
Limit large uploads (> 128MiB) to a max of 10 workers, intent is to avoid
larger uploads from using all replication bandwidth, giving room for smaller
uploads to sync faster.
slower drives get knocked off because they are too slow via
active monitoring, we do not need to block calls arbitrarily.
Serializing adds latencies for already slow calls, remove
it for SSDs/NVMEs
Also, add a selection with context when writing to `out <-`
channel, to avoid any potential blocks.
Revert "don't error when asked for 0-based range on empty objects (#17708)"
This reverts commit 7e76d66184.
There is no valid way to specify offsets in a 0-byte file. Blame it on the [RFC](https://datatracker.ietf.org/doc/html/rfc7233#section-4.4)
> The 416 (Range Not Satisfiable) status code indicates that none of the ranges in the
> request's Range header field (Section 3.1) overlap the current extent of the selected resource...
A request for "bytes=0-" is a request for the first byte of a resource. If the resource is 0-length,
the range [0,0] does not overlap the resource content and the server responds with an error.
In a reverse proxying setup, a proxy in front of MinIO may attempt to
request objects in slices for enhanced cache efficiency. Since such a
a proxy cannot have prior knowledge of how large a requested resource is,
it usually sends a header of the form:
Range: 0-$slice_size
... and, depending on the size of the resource, expects either:
- an empty response, if $resource_size == 0
- a full response, if $resource_size <= $slice_size
- a partial response, if $resource_size > $slice_size
Prior to this change, MinIO would respond 416 Range Not Satisfiable if a
client tried to request a range on an empty resource. This behavior is
technically consistent with RFC9110[1] – However, it renders sliced
reverse proxying, such as implemented in Nginx, broken in the case of
empty files. Nginx itself seems to break this convention to enable
"useful" responses in these cases, and MinIO should probably do that
too.
[1]: https://www.rfc-editor.org/rfc/rfc9110#byte.ranges
