Limit large uploads (> 128MiB) to a max of 10 workers, intent is to avoid
larger uploads from using all replication bandwidth, giving room for smaller
uploads to sync faster.
slower drives get knocked off because they are too slow via
active monitoring, we do not need to block calls arbitrarily.
Serializing adds latencies for already slow calls, remove
it for SSDs/NVMEs
Also, add a selection with context when writing to `out <-`
channel, to avoid any potential blocks.
Revert "don't error when asked for 0-based range on empty objects (#17708)"
This reverts commit 7e76d66184.
There is no valid way to specify offsets in a 0-byte file. Blame it on the [RFC](https://datatracker.ietf.org/doc/html/rfc7233#section-4.4)
> The 416 (Range Not Satisfiable) status code indicates that none of the ranges in the
> request's Range header field (Section 3.1) overlap the current extent of the selected resource...
A request for "bytes=0-" is a request for the first byte of a resource. If the resource is 0-length,
the range [0,0] does not overlap the resource content and the server responds with an error.
In a reverse proxying setup, a proxy in front of MinIO may attempt to
request objects in slices for enhanced cache efficiency. Since such a
a proxy cannot have prior knowledge of how large a requested resource is,
it usually sends a header of the form:
Range: 0-$slice_size
... and, depending on the size of the resource, expects either:
- an empty response, if $resource_size == 0
- a full response, if $resource_size <= $slice_size
- a partial response, if $resource_size > $slice_size
Prior to this change, MinIO would respond 416 Range Not Satisfiable if a
client tried to request a range on an empty resource. This behavior is
technically consistent with RFC9110[1] – However, it renders sliced
reverse proxying, such as implemented in Nginx, broken in the case of
empty files. Nginx itself seems to break this convention to enable
"useful" responses in these cases, and MinIO should probably do that
too.
[1]: https://www.rfc-editor.org/rfc/rfc9110#byte.ranges
sending whitespace character with CompleteMultipartUpload()
with 200 OK was an AWS S3 compatible implementation detail,
and it was expected that the client SDK must look for both
successful XML as well as error XML for 200 OK.
But this is not useful anymore on MinIO, since we do not
have any large delayed coalescing of parts anymore.
users/customers do not have a reasonable number of buckets anymore,
this is why we must avoid overpopulating cluster endpoints, instead
move the bucket monitoring to a separate endpoint.
some of it's a breaking change here for a couple of metrics, but
it is imperative that we do it to improve the responsiveness of
our Prometheus cluster endpoint.
Bonus: Added new cluster metrics for usage, objects and histograms
Using this script, post decrypt we should be able to bring up the
MinIO instance with same configuration.
Signed-off-by: Shubhendu Ram Tripathi <shubhendu@minio.io>
Sometimes IAM fails to load certain items, which could be a user,
a service account or a policy but with not enough information for
us to debug.
This commit will create a more descriptive error to make it easier to
debug in such situations.
mc admin trace -a will be able to quickly show
401 Unauthorized header to pinpoint trivial issues
between nodes, such as wrong root
credentials and skewed time.
objects/versions that are not expired via NewerNoncurrentVersions
must be properly returned to be applied under further ILM actions.
this would cause legitimately expired objects to be missed
from expiration.
this randomness is needed to avoid scanning
the same buckets across different erasure sets,
in the same order.
allow random buckets to be scanned instead
allowing a wider spread of ILM, replication
checks.
Additionally do not loop over twice to fill
the channel, fill the channel regardless of
having bucket new or old.
A new middleware function is added for admin handlers, including options
for modifying certain behaviors. This admin middleware:
- sets the handler context via reflection in the request and sends AuditLog
- checks for object API availability (skipping it if a flag is passed)
- enables gzip compression (skipping it if a flag is passed)
- enables header tracing (adding body tracing if a flag is passed)
While the new function is a middleware, due to the flags used for
conditional behavior modification, which is used in each route registration
call.
To try to ensure that no regressions are introduced, the following
changes were done mechanically mostly with `sed` and regexp:
- Remove defer logger.AuditLog in admin handlers
- Replace newContext() calls with r.Context()
- Update admin routes registration calls
Bonus: remove unused NetSpeedtestHandler
Since the new adminMiddleware function checks for object layer presence
by default, we need to pass the `noObjLayerFlag` explicitly to admin
handlers that should work even when it is not available. The following
admin handlers do not require it:
- ServerInfoHandler
- StartProfilingHandler
- DownloadProfilingHandler
- ProfileHandler
- SiteReplicationDevNull
- SiteReplicationNetPerf
- TraceHandler
For these handlers adminMiddleware does not check for the object layer
presence (disabled by passing the `noObjLayerFlag`), and for all other
handlers, the pre-check ensures that the handler is not called when the
object layer is not available - the client would get a
ErrServerNotInitialized and can retry later.
This `noObjLayerFlag` is added based on existing behavior for these
handlers only.
Add check every 2 minutes to see if a write+read operation can complete.
If disk is unresponsive for 2 minutes or returns errFaultyDisk, take it offline.
Simplify MRF queueing and add backlog handler
- Limit re-tries to 3 to avoid repeated re-queueing. Fall offs
to be re-tried when the scanner revisits this object or upon access.
- Change MRF to have each node process only its MRF entries.
- Collect MRF backlog by the node to allow for current backlog visibility
Now it would list details of all KMS instances with additional
attributes `endpoint` and `version`. In the case of k8s-based
deployment the list would consist of a single entry.
Signed-off-by: Shubhendu Ram Tripathi <shubhendu@minio.io>
This would better to record the correct API name so that
any verification around audit logs to figure out if required
APIs are called required no of times, would be correct.
Here in this case of policy attached, API `AttachDetachPolicyBuiltin`
would be called with `requestPath` as `/minio/admin/v3/idp/builtin/policy/attach`
and in case of detach policy the value would be `/minio/admin/v3/idp/builtin/policy/detach`
Signed-off-by: Shubhendu Ram Tripathi <shubhendu@minio.io>
Also shutdown poll add jitter, to verify if the shutdown
sequence can finish before 500ms, this reduces the overall
time taken during "restart" of the service.
Provides speedup for `mc admin service restart` during
active I/O, also ensures that systemd doesn't treat the
returned 'error' as a failure, certain configurations in
systemd can cause it to 'auto-restart' the process by-itself
which can interfere with `mc admin service restart`.
It can be observed how now restarting the service is
much snappier.
on unversioned buckets its possible that 0-byte objects
might lose quorum on flaky systems, allow them to be same
as DELETE markers. Since practically speak they have no
content.
Optimize DeleteObject API to avoid extra
GetObjectInfo call on the replicating side.
For receiving side, it is just a regular
DeleteObject call.
Bonus: Fix a corner case where version purged is
absent on target (either due to replication not yet
complete or target version already deleted in a
one-way replication or when replication was disabled).
In such cases, mark version purge complete.
Since `addCustomerHeaders` middleware was after the `httpTracer`
middleware, the request ID was not set in the http tracing context. By
reordering these middleware functions, the request ID header becomes
available. We also avoid setting the tracing context key again in
`newContext`.
Bonus: All middleware functions are renamed with a "Middleware" suffix
to avoid confusion with http Handler functions.
* Reduce allocations
* Add stringsHasPrefixFold which can compare string prefixes, while ignoring case and not allocating.
* Reuse all msgp.Readers
* Reuse metadata buffers when not reading data.
* Make type safe. Make buffer 4K instead of 8.
* Unslice
DNS refresh() in-case of MinIO can safely re-use
the previous values on bare-metal setups, since
bare-metal arrangements do not change DNS in any
manner commonly.
This PR simplifies that, we only ever need DNS caching
on bare-metal setups.
- On containerized setups do not enable DNS
caching at all, as it may have adverse effects on
the overall effectiveness of k8s DNS systems.
k8s DNS systems are dynamic and expect applications
to avoid managing DNS caching themselves, instead
provide a cleaner container native caching
implementations that must be used.
- update IsDocker() detection, including podman runtime
- move to minio/dnscache fork for a simpler package
Following extension allows users to specify immediate purge of
all versions as soon as the latest version of this object has
expired.
```
<LifecycleConfiguration>
<Rule>
<ID>ClassADocRule</ID>
<Filter>
<Prefix>classA/</Prefix>
</Filter>
<Status>Enabled</Status>
<Expiration>
<Days>3650</Days>
<ExpiredObjectAllVersions>true</ExpiredObjectAllVersions>
</Expiration>
</Rule>
...
```
- look for requested encryption while compressing
not just via HTTP Headers, but also via multipart
metadata
- look for SSE-S3 etag decryption not just via HTTP
Headers, but also via multipart metadata
fixes#17519
current decommission traces were missing for
- Skipped ILM expired versions
- Skipped single DELETE marked version
- A success or failure in decommissioning DELETE marker
- allow additional info to be shared in DecomStatus() API
there is a possibility that slow drives can actually add latency
to the overall call, leading to a large spike in latency.
this can happen if there are other parallel listObjects()
calls to the same drive, in-turn causing each other to sort
of serialize.
this potentially improves performance and makes PutObject()
also non-blocking.
This change adds a `Secret` property to `HelpKV` to identify secrets
like passwords and auth tokens that should not be revealed by the server
in its configuration fetching APIs. Configuration reporting APIs now do
not return secrets.
For policy attach/detach API to work correctly the server should hold a
lock before reading existing policy mapping and until after writing the
updated policy mapping. This is fixed in this change.
A site replication bug, where LDAP policy attach/detach were not
correctly propagated is also fixed in this change.
Bonus: Additionally, the server responds with the actual (or net)
changes performed in the attach/detach API call. For e.g. if a user
already has policy A applied, and a call to attach policies A and B is
performed, the server will respond that B was attached successfully.
A continuation of PR #17479 for rebalance behavior must
also match the decommission behavior.
Fixes bug where rebalance would ignore rebalancing object
versions after one of the version returned "ObjectNotFound"
