This is a defensive change to avoid any future issues,
from this part of the code. New change also ensures
to populate UUID if present for the right disk.
This commit fixes the web ZIP download handler for
encrypted objects. The decryption logic has moved into
`getObjectNInfo`. So trying to decrypt the (already decrypted)
content again in the ZIP handler obviously causes an error.
This commit fixes this by removing the decryption logic from the
the handler.
Fixes#7965
The underlying errors are important, for IAM
requirements and should wait appropriately at
the caller level, this allows for distributed
setups to run properly and not fail prematurely
during startup.
Also additionally fix the onlineDisk counting
The change now is to ensure that we take custom URL as
well for updating the deployment, this is required for
hotfix deliveries for certain deployments - other than
the community release.
This commit changes the previous work d65a2c6725
with newer set of requirements.
Also deprecates PeerUptime()
net.Error is very unreliable in providing better error
handling, we need to ensure that we always have a fallback
option in case of network failures.
This fixes an important issue in our distributed server
setups when one of the servers is down, all deployments
out there are recommended to upgrade after this fix is
merged to ensure that availability is not lost.
Fixes#8127Fixes#8016Fixes#7964
This API implementation simply behaves like listObjects()
but returns back single version for each object, this
implementation should be considered dummy it is only
meant for some applications which rely on this.
This is to avoid using unsafe.Pointer type
code dependency for MinIO, this causes
crashes on ARM64 platforms
Refer #8005 collection of runtime crashes due
to unsafe.Pointer usage incorrectly. We have
seen issues like this before when using
jsoniter library in the past.
This PR hopes to fix this using fastjson
Add better dynamic timeouts for locks, also
add jitters before launching daily sweep to ensure
that not all the servers in distributed setup
are not trying to hold locks to begin the sweep
round.
Also, add enough delay for incoming requests based
on totalSetCount*totalDriveCount.
A possible fix for #8071
It is observed that when `mc admin trace` is being
used due to ResponseWriter wrapper, we loose information
about statusCode,statusText for audit logging.
This PR fixes this behavior
This avoids a network call, also fixes an issue
when empty paths are passed the underlying call
fails with "405 Method Not Allowed".
This is reproducible when you are deleting a
non-existent object.
Fixes#8083
Add API to set policy mapping for a user or group
Contains a breaking Admin APIs change.
- Also enforce all applicable policies
- Removes the previous /set-user-policy API
Bump up peerRESTVersion
Add get user info API to show groups of a user
* Cleanup ui-errors and print proper error messages
Change HELP to HINT instead, handle more error
cases when starting up MinIO. One such is related
to #8048
* Apply suggestions from code review
When a peer client which higher version sends a request to a peer
server with lower version, the returned status code is 200 OK instead
of 405 code. The reason is that the peer client request reaches the
browser handler, which registers itself by '/minio' route but without
any other constraints. Adding filtering by user agent header to the
browser route so internal requests to old endpoints versions return
405 error code.
This is a behavior change from AWS S3, but it is done with
better judgment on our end to allow the listing of buckets only
which user has access to.
The advantage is this declutters the UI for users and only
lists bucket which they have access to.
Precursor for this feature to be applicable is a policy
must have the following actions
```
s3:ListAllMyBuckets
```
and
```
s3:ListBucket
```
enabled in the policy.
Fixes#7458Fixes#7573Fixes#7938Fixes#6934Fixes#6265Fixes#6630
This will allow the cache to consistently work for
server and gateways. Range GET requests will
be cached in the background after the request
is served from the backend.
- All cached content is automatically bitrot protected.
- Avoid ETag verification if a cache-control header
is set and the cached content is still valid.
- This PR changes the cache backend format, and all existing
content will be migrated to the new format. Until the data is
migrated completely, all content will be served from the backend.
Refactor the Dirent parsing code such that when we
calculate offsets are correct based on the platform
This PR fixes a silent potential crash on ARM
architecture.
This commit fixes a DoS issue that is caused by an incorrect
SHA-256 content verification during STS requests.
Before that fix clients could write arbitrary many bytes
to the server memory. This commit fixes this by limiting the
request body size.
This change adds admin APIs and IAM subsystem APIs to:
- add or remove members to a group (group addition and deletion is
implicit on add and remove)
- enable/disable a group
- list and fetch group info
When checking if federation is necessary, the code compares
the SRV record stored in etcd against the list of endpoints
that the MinIO server is exposing. If there is an intersection
in this list the request is forwarded.
The SRV record includes both the host and the port, but the
intersection check previously only looked at the IP address. This
would prevent federation from working in situations where the endpoint
IP is the same for multiple MinIO servers. Some examples of where this
can occur are:
- running mulitiple copies of MinIO on the same host
- using multiple MinIO servers behind a NAT with port-forwarding
This commit adds a new method `UpdateKey` to the KMS
interface.
The purpose of `UpdateKey` is to re-wrap an encrypted
data key (the key generated & encrypted with a master key by e.g.
Vault).
For example, consider Vault with a master key ID: `master-key-1`
and an encrypted data key `E(dk)` for a particular object. The
data key `dk` has been generated randomly when the object was created.
Now, the KMS operator may "rotate" the master key `master-key-1`.
However, the KMS cannot forget the "old" value of that master key
since there is still an object that requires `dk`, and therefore,
the `D(E(dk))`.
With the `UpdateKey` method call MinIO can ask the KMS to decrypt
`E(dk)` with the old key (internally) and re-encrypted `dk` with
the new master key value: `E'(dk)`.
However, this operation only works for the same master key ID.
When rotating the data key (replacing it with a new one) then
we perform a `UnsealKey` operation with the 1st master key ID
and then a `GenerateKey` operation with the 2nd master key ID.
This commit also updates the KMS documentation and removes
the `encrypt` policy entry (we don't use `encrypt`) and
add a policy entry for `rewarp`.
After some extensive refactors, it turned out empty directories
are not healed and heal status is also not reported correctly.
This commit fixes it and adds the appropriate unit tests
This PR fixes relying on r.Context().Done()
by setting
```
Connection: "close"
```
HTTP Header, this has detrimental issues for
client side connection pooling. Since this
header explicitly tells clients to turn-off
connection pooling. This causing pro-active
connections to be closed leaving many conn's
in TIME_WAIT state. This can be observed with
`mc admin trace -a` when running distributed
setup.
This PR also fixes tracing filtering issue
when bucket names have `minio` as prefixes,
trace was erroneously ignoring them.
Golang proactively prints this error
`http: proxy error: context canceled`
when a request arrived to the current deployment and
redirected to another deployment in a federated setup.
Since this error can confuse users, this commit will
just hide it.
Allow renaming/editing a notification config. By replying with
a successful GetBucketNotification response, without checking
for any missing config ARN in targetList.
Fixes#7650
Related to #7982, this PR refactors the code
such that we validate the OPA or JWKS in a
common place.
This is also a refactor which is already done
in the new config migration change. Attempt
to avoid any network I/O during Unmarshal of
JSON from disk, instead do it later when
updating the in-memory data structure.
In situations such as when client uploading data,
prematurely disconnects from server such as pressing
ctrl-c before uploading all the data. Under this
situation in distributed setup we prematurely
disconnect disks causing a reconnect loop. This has
an adverse affect we end up leaving a lot of files
in temporary location which ideally should have been
cleaned up when Put() prematurely fails.
This is also a regression which got introduced in #7610
- Policy mapping is now at `config/iam/policydb/users/myuser1.json`
and includes version.
- User identity file is now versioned.
- Migrate old data to the new format.
Calling ListMultipartUploads fails if an upload is aborted while a
part is being uploaded because the directory for the upload exists
(since fsRenameFile ends up calling os.MkdirAll) but the meta JSON file
doesn't. To fix this we make sure an upload hasn't been aborted during
PutObjectPart by checking the existence of the directory for the upload
while moving the temporary part file into it.
This PR is based off @sinhaashish's PR for object lifecycle
management, which includes support only for,
- Expiration of object
- Filter using object prefix (_not_ object tags)
N B the code for actual expiration of objects will be included in a
subsequent PR.
Current code already allows users to GetPolicy/SetPolicy
there was a missing code in ListAllBucketPolicies to allow
access, this fixes this behavior.
Fixes#7913
The fix in #7646 introduced a regression which
was left unnoticed, the fix didn't work for
sub-commands unfortunately. This fixes it
by moving v1.21.0 version of the minio/cli
package.
Fixes#7924
posix.VerifyFile() doesn't know how to check if a file
is corrupted if that file is empty. We do have the part
size in xl.json so we pass it to VerifyFile to return
an error so healing empty parts can work properly.
When MinIO is behind a proxy, proxies end up killing
clients when no data is seen on the connection, adding
the right content-type ensures that proxies do not come
in the way.
Update prompt shows some weird characters under Windows, the reason
is that go-prompt is used to show a yes/no prompt, since go-prompt
does not seem to have a way to support color/fatih, this PR will
implements its own yes/no prompt with the correct text coloration.
Anis Elleuch
Bala FA
Harshavardhana
Andreas Auernhammer
Aditya Manthramurthy
Krishna Srinivas
poornas
Praveen raj Mani
kannappanr
Krishnan Parthasarathi
Nitish Tiwari
maihde
Jakob Ackermann
Daryl Finlay
Christian Muehlhaeuser
Ashish Kumar Sinha
ebozduman
mzukowski-reef