- Move RenameFile to websockets
- Move ReadAll that is primarily is used
for reading 'format.json' to to websockets
- Optimize DiskInfo calls, and provide a way
to make a NoOp DiskInfo call.
AlmosAll uses of NewDeadlineWorker, which relied on secondary values, were used in a racy fashion,
which could lead to inconsistent errors/data being returned. It also propagates the deadline downstream.
Rewrite all these to use a generic WithDeadline caller that can return an error alongside a value.
Remove the stateful aspect of DeadlineWorker - it was racy if used - but it wasn't AFAICT.
Fixes races like:
```
WARNING: DATA RACE
Read at 0x00c130b29d10 by goroutine 470237:
github.com/minio/minio/cmd.(*xlStorageDiskIDCheck).ReadVersion()
github.com/minio/minio/cmd/xl-storage-disk-id-check.go:702 +0x611
github.com/minio/minio/cmd.readFileInfo()
github.com/minio/minio/cmd/erasure-metadata-utils.go:160 +0x122
github.com/minio/minio/cmd.erasureObjects.getObjectFileInfo.func1.1()
github.com/minio/minio/cmd/erasure-object.go:809 +0x27a
github.com/minio/minio/cmd.erasureObjects.getObjectFileInfo.func1.2()
github.com/minio/minio/cmd/erasure-object.go:828 +0x61
Previous write at 0x00c130b29d10 by goroutine 470298:
github.com/minio/minio/cmd.(*xlStorageDiskIDCheck).ReadVersion.func1()
github.com/minio/minio/cmd/xl-storage-disk-id-check.go:698 +0x244
github.com/minio/minio/internal/ioutil.(*DeadlineWorker).Run.func1()
github.com/minio/minio/internal/ioutil/ioutil.go:141 +0x33
WARNING: DATA RACE
Write at 0x00c0ba6e6c00 by goroutine 94507:
github.com/minio/minio/cmd.(*xlStorageDiskIDCheck).StatVol.func1()
github.com/minio/minio/cmd/xl-storage-disk-id-check.go:419 +0x104
github.com/minio/minio/internal/ioutil.(*DeadlineWorker).Run.func1()
github.com/minio/minio/internal/ioutil/ioutil.go:141 +0x33
Previous read at 0x00c0ba6e6c00 by goroutine 94463:
github.com/minio/minio/cmd.(*xlStorageDiskIDCheck).StatVol()
github.com/minio/minio/cmd/xl-storage-disk-id-check.go:422 +0x47e
github.com/minio/minio/cmd.getBucketInfoLocal.func1()
github.com/minio/minio/cmd/peer-s3-server.go:275 +0x122
github.com/minio/pkg/v2/sync/errgroup.(*Group).Go.func1()
```
Probably back from #17701
- HealFormat() was leaking healthcheck goroutines for
disks, we are only interested in enabling healthcheck
for the newly formatted disk, not for existing disks.
- When disk is a root-disk a random disk monitor was
leaking while we ignored the drive.
- When loading the disk for each erasure set, we were
leaking goroutines for the prepare-storage.go disks
which were replaced via the globalLocalDrives slice
- avoid disk monitoring utilizing health tokens that
would cause exhaustion in the tokens, prematurely
which were meant for incoming I/O. This is ensured
by avoiding writing O_DIRECT aligned buffer instead
write 2048 worth of content only as O_DSYNC, which is
sufficient.
Add a hidden configuration under the scanner sub section to configure if
the scanner should sleep between two objects scan. The configuration has
only effect when there is no drive activity related to s3 requests or
healing.
By default, the code will keep the current behavior which is doing
sleep between objects.
To forcefully enable the full scan speed in idle mode, you can do this:
`mc admin config set myminio scanner idle_speed=full`
NOTE: This feature is not retro-active; it will not cater to previous transactions
on existing setups.
To enable this feature, please set ` _MINIO_DRIVE_QUORUM=on` environment
variable as part of systemd service or k8s configmap.
Once this has been enabled, you need to also set `list_quorum`.
```
~ mc admin config set alias/ api list_quorum=auto`
```
A new debugging tool is available to check for any missing counters.
`(*xlStorageDiskIDCheck).CreateFile` wraps the incoming reader in `xioutil.NewDeadlineReader`.
The wrapped reader is handed to `(*xlStorage).CreateFile`. This performs a Read call via `writeAllDirect`,
which reads into an `ODirectPool` buffer.
`(*DeadlineReader).Read` spawns an async read into the buffer. If a timeout is hit while reading,
the read operation returns to `writeAllDirect`. The operation returns an error and the buffer is reused.
However, if the async `Read` call unblocks, it will write to the now recycled buffer.
Fix: Remove the `DeadlineReader` - it is inherently unsafe. Instead, rely on the network timeouts.
This is not a disk timeout, anyway.
Regression in https://github.com/minio/minio/pull/17745
Bonus: allow replication to attempt Deletes/Puts when
the remote returns quorum errors of some kind, this is
to ensure that MinIO can rewrite the namespace with the
latest version that exists on the source.
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
sendfile implementation to perform DMA on all platforms
Go stdlib already supports sendfile/splice implementations
for
- Linux
- Windows
- *BSD
- Solaris
Along with this change however O_DIRECT for reads() must be
removed as well since we need to use sendfile() implementation
The main reason to add O_DIRECT for reads was to reduce the
chances of page-cache causing OOMs for MinIO, however it would
seem that avoiding buffer copies from user-space to kernel space
this issue is not a problem anymore.
There is no Go based memory allocation required, and neither
the page-cache is referenced back to MinIO. This page-
cache reference is fully owned by kernel at this point, this
essentially should solve the problem of page-cache build up.
With this now we also support SG - when NIC supports Scatter/Gather
https://en.wikipedia.org/wiki/Gather/scatter_(vector_addressing)
currently the default for all drives is 512, which is a lot
for HDDs the recent testing has revealed moving this to 32
for HDDs seems like a fair value.
.metacache objects are transient in nature, and are better left to
use page-cache effectively to avoid using more IOPs on the disks.
this allows for incoming calls to be not taxed heavily due to
multiple large batch listings.
Bonus:
- avoid calling DiskInfo() calls when missing blocks
instead heal the object using MRF operation.
- change the max_sleep to 250ms beyond that we will
not stop healing.
health checks were missing for drives replaced since
- HealFormat() would replace the drives without a health check
- disconnected drives when they reconnect via connectEndpoint()
the loop also loses health checks for local disks and merges
these into a single code.
- other than this separate cleanUp, health check variables to avoid
overloading them with similar requirements.
- also ensure that we compete via context selector for disk monitoring
such that the canceled disks don't linger around longer waiting for
the ticker to trigger.
- allow disabling active monitoring.
Add check every 2 minutes to see if a write+read operation can complete.
If disk is unresponsive for 2 minutes or returns errFaultyDisk, take it offline.
xl.meta gets written and never rolled back, however
we definitely need to validate the state that is
persisted on the disk, if there are inconsistencies
- more than write quorum we should return an error
to the client
- if write quorum was achieved however there are
inconsistent xl.meta's we should simply trigger
an MRF on them
Do completely independent multipart uploads.
In distributed mode, a lock was held to merge each multipart
upload as it was added. This lock was highly contested and
retries are expensive (timewise) in distributed mode.
Instead, each part adds its metadata information uniquely.
This eliminates the per object lock required for each to merge.
The metadata is read back and merged by "CompleteMultipartUpload"
without locks when constructing final object.
Co-authored-by: Harshavardhana <harsha@minio.io>
Small uploads spend a significant amount of time (~5%) fetching disk info metrics. Also maps are allocated for each call.
Add a 100ms cache to disk metrics.
Harshavardhana
Klaus Post
Anis Eleuch
jiuker
Aditya Manthramurthy
ebozduman
Praveen raj Mani